Microchip Technology

ATTINY13-20MU - 20MHz 8-Bit AVR MCU | Microchip Technology

MPN: ATTINY13-20MU ✓ Aktif
2.7 V to 5.5 V Vdss 20-QFN-EP (4 mm × 4 mm) Package 20 MHz Speed 1 KB (512 × 16 bits) Memory
MOQ: 1 |

ATTINY13-20MU Ringkasan

The Microchip Technology ATTINY13-20MU is an 8-bit AVR microcontroller operating at up to 20 MHz, with 1 KB of Flash memory, 64 bytes of EEPROM, and 64 bytes of SRAM in a 20-QFN-EP 4 mm × 4 mm package. The device operates from 2.7 V to 5.5 V and includes an analog-to-digital converter. Its compact package, low-voltage operation, and integrated serial programming support make it suitable for embedded control, sensor acquisition, and compact consumer-device designs.

An 8-bit microcontroller is a programmable control IC that integrates a processor core, nonvolatile program memory, data memory, and peripherals on one semiconductor die. The ATtiny family belongs to the AVR architecture, a reduced-instruction-computer design suited to compact embedded control. Within the product hierarchy, ATTINY13-20MU is a microcontroller, embedded controller, programmable logic device, and semiconductor.

The principal device ratings are a 20 MHz maximum clock, 1 KB Flash organized as 512 × 16 bits, 64 bytes of EEPROM, and 64 bytes of SRAM. The Flash memory stores the application program, EEPROM provides nonvolatile data storage, and SRAM provides volatile working memory. The integrated ADC supports analog measurements, while the 2.7 V to 5.5 V supply range accommodates common low-voltage embedded systems.

The 20-QFN-EP 4 mm × 4 mm package provides a compact surface-mount footprint and an exposed thermal pad for heat transfer through the PCB. Compared with a larger leaded package, this arrangement supports dense layouts but requires careful land-pattern and paste-control implementation. The exposed pad must be connected according to the manufacturer's recommended footprint and thermal design.

Typical uses include battery-powered sensor nodes, compact LED controllers, simple motor or actuator controls, appliance interfaces, educational electronics, and small AVR-based control boards. The 1 KB program-memory limit makes code economy especially important, while the ADC allows an application to read analog inputs without adding a separate converter.

For a new PCB, follow the manufacturer datasheet for the exact QFN land pattern, exposed-pad connection, decoupling, programming pins, and operating-voltage limits. Because the part is only 4 mm × 4 mm, inspect the assembled board for solder bridges around closely spaced pads and confirm the programming interface remains accessible.

This page combines the exact ATTINY13-20MU specifications, a focused same-package replacement assessment, engineering design notes, and application guidance to support component selection, PCB design, firmware planning, and sourcing decisions.

Pilihan pengganti yang segera untuk ATTINY13-20MU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ATTINY13-20MU (sama faktor bentuk dan kaki) — berbeza dalam Architecture, Flash Memory, Package.

Microchip Technology
Architecture: AVR enhanced RISC
Flash Memory: 1 KB (512 x 16 bytes)
Package: 20-QFN-EP, 4 mm x 4 mm
Bandingkan Dengan ATTINY13-20MU →

ATTINY13A-MU

✅ Masuk Drop-In
Microchip Technology
📦 20-QFN-EP (4 mm × 4 mm)
8-bit RISC-based microcontroller · AVR enhanced RISC · 8 bit · 20 MHz · 20 MIPS at 20 MHz · 1.8 V to 5.5 V · 1 KB (512 x 16 bytes) · 64 bytes

Hubungi untuk harga

Lihat Datasheet →

ATTINY13-20MU Penilaian maksimum & Ciri-ciri Elektrik

Microcontroller Type 8-bit AVR microcontroller
Frekuensi Klock Maksimum 20 MHz
Flash Memory 1 KB (512 × 16 bits)
EEPROM 64 bytes
SRAM 64 bytes
Operating Voltage 2.7 V to 5.5 V
ADC Integrated analog-to-digital converter
Kemasan 20-QFN-EP (4 mm × 4 mm)
Jenis Pemasangan Surface mount
Architecture AVR 8-bit RISC
Program Memory Type Flash
Nonvolatile Data Memory 64-byte EEPROM
Volatile Data Memory 64-byte SRAM
Bilangan Pin 20 pins
Package Body Size 4 mm × 4 mm
Exposed Thermal Pad Present
Status RoHS Compliant

Panduan Konfigurasi Pin ATTINY13-20MU 4 mm × 4 mm

Konfigurasi pin untuk ATTINY13-20MU (4 mm × 4 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 4 mm × 4 mm untuk ATTINY13-20MU

Tiada data garisan pin yang diperoleh untuk ATTINY13-20MU.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATTINY13-20MU patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Compact LED Control, Small Motor and Actuator Control, Appliance and User-Interface Controls, Educational AVR Projects, Arduino-Compatible Embedded Projects.

🧩

Battery-Powered Sensor Nodes

The ATTINY13-20MU fits compact battery-powered sensor nodes because its 2.7 V to 5.5 V operating range supports low-voltage supply designs and its integrated ADC can acquire analog inputs without a separate converter. The device provides 20 MHz processing, 1 KB of Flash, 64 bytes of EEPROM, and 64 bytes of SRAM for control logic, calibration values, and short-lived working data. In a periodic-sampling design, the MCU can wake an external sensor, read an analog value, update a small state machine, and return to sleep. Firmware should minimize RAM consumption and avoid libraries that consume most of the available 1 KB program space. Regulator quiescent current, sensor standby demand, and the ATtiny sleep mode will have a greater effect on total runtime than raw CPU speed.

💡

Compact LED Control

The ATTINY13-20MU can control compact LED indicators, status lamps, and small lighting sequences where a full-sized MCU would add unnecessary cost and board area. Its 20 MHz clock provides ample execution speed for simple timing, button handling, and digital state updates, while 1 KB of Flash can hold a focused control program. The integrated ADC can support brightness adjustment through a divider or light sensor when analog input is needed. A surface-mount 20-QFN-EP 4 mm × 4 mm package permits placement close to the LED driver circuitry. Because only 64 bytes of SRAM are available, use compact state variables and avoid buffering multiple display frames. Drive the LED through an appropriate transistor or constant-current arrangement rather than placing excessive current on a GPIO.

🔧

Small Motor and Actuator Control

The ATTINY13-20MU is suitable for small motors, solenoids, and actuator interfaces when the application requires simple sequencing rather than a high-performance real-time control loop. Its 8-bit AVR core and 20 MHz maximum clock can execute debounce logic, limit timing, state-machine transitions, and basic speed-control routines. The 1 KB Flash capacity favors concise firmware, and the 64-byte EEPROM can retain selected settings across power cycles. The MCU should not drive inductive loads directly; use a suitable transistor, flyback diode, and current-limiting arrangement. Validate stall current and switching transients against the chosen external hardware. If the design requires extensive motion tables or multiple control channels, the limited memory resources may become the deciding constraint.

🏭

Appliance and User-Interface Controls

The ATTINY13-20MU can serve as the controller for a compact appliance panel, keypad interface, or simple product configuration module. Its 20 MHz processing speed is more than adequate for debouncing switches, driving a small indicator set, and coordinating a fixed sequence of user actions. With 64 bytes of EEPROM, the device can retain a small number of configuration parameters, while 1 KB of Flash supports a narrowly defined control application. The 2.7 V to 5.5 V range permits use in low-voltage product electronics, although all external inputs must be compatible with the chosen operating voltage. A production design should include defined reset behavior, programming access, and debounce timing. The small memory footprint makes concise state handling and bounded data structures especially important.

🧑‍🏫

Educational AVR Projects

The ATTINY13-20MU is well suited to educational AVR projects that teach embedded programming through compact hardware demonstrations. Students can experiment with GPIO control, timers, serial programming, and ADC-based measurements while using a device that exposes 1 KB of Flash, 64 bytes of EEPROM, and 64 bytes of SRAM. The 20 MHz clock supports responsive demonstrations without requiring a large microcontroller. Because memory is deliberately limited, the part teaches efficient coding, modular program structure, and careful register-level resource management. The 4 mm × 4 mm QFN package also introduces practical SMD assembly considerations, making it useful for reflow and inspection exercises. For breadboard-based instruction, a breakout board can simplify probing, but production artwork should follow the manufacturer footprint and exposed-pad guidance.

📱

Arduino-Compatible Embedded Projects

The ATTINY13-20MU can serve as the core controller in small Arduino-compatible embedded projects when a compact AVR solution and modest processing requirements are sufficient. Its 8-bit architecture, 20 MHz clock, and integrated ADC support common tasks such as reading sensors, switching outputs, and running basic timing loops. The 1 KB program memory and 64 bytes of SRAM require carefully selected routines and lightweight libraries, so larger Arduino examples may not fit or execute as intended. Builders should use the exact device definition associated with ATTINY13-20MU in the programming environment and verify clock, fuse, and bootloader settings. A purpose-built breakout is convenient for prototyping, while a custom PCB should preserve the manufacturer QFN-EP land pattern, programming access, and exposed-pad thermal design.

What are the key specifications of ATTINY13-20MU that engineers should know?
The ATTINY13-20MU is an 8-bit AVR microcontroller rated for 20 MHz operation, 1 KB of Flash, 64 bytes of EEPROM, 64 bytes of SRAM, and 2.7 V to 5.5 V operation. According to the Microchip Technology product documentation, it also includes an ADC and is supplied in a 20-QFN-EP 4 mm × 4 mm package. Its small memory footprint makes code and RAM planning important, while the integrated ADC supports compact sensor interfaces.
What is the operating voltage of ATTINY13-20MU?
The ATTINY13-20MU operates from 2.7 V to 5.5 V. According to the Microchip Technology component listing, the device is an 8-bit AVR microcontroller with a 20 MHz maximum clock and an integrated ADC. Designers should ensure every external sensor, programming adapter, and I/O circuit remains compatible with the selected supply voltage, particularly when using 5 V peripherals alongside this low-voltage MCU.
How much memory does ATTINY13-20MU have?
The ATTINY13-20MU provides 1 KB of Flash memory, 64 bytes of EEPROM, and 64 bytes of SRAM. According to the Microchip Technology product description, Flash is organized as 512 × 16 bits. This combination is suitable for compact control programs, but library selection should account for the limited code space and volatile working memory.
Where can I download the ATTINY13-20MU datasheet PDF?
The ATTINY13-20MU datasheet can be accessed through the Microchip Technology product documentation and the Octopart datasheet page listed on this page. The manufacturer datasheet is the preferred source for the complete pin description, memory map, register definitions, electrical characteristics, recommended QFN-EP land pattern, programming connections, and package drawings. Use it directly when creating a PCB or configuring the AVR toolchain.
Where can I find the ATTINY13-20MU pinout and QFN footprint?
The ATTINY13-20MU pinout and footprint should be taken from the Microchip Technology manufacturer datasheet, using the drawing for the 20-QFN-EP 4 mm × 4 mm package. The part has 20 package pins and an exposed pad. Confirm pin functions, exposed-pad connectivity, and solder-mask recommendations in the datasheet before releasing artwork or assembling a board.
Is ATTINY13-20MU suitable for battery-powered sensor projects?
The ATTINY13-20MU can suit battery-powered sensor projects because it operates from 2.7 V to 5.5 V and includes an ADC in a compact 4 mm × 4 mm surface-mount package. According to the Microchip Technology listing, the MCU provides 20 MHz performance, 1 KB of Flash, 64 bytes of EEPROM, and 64 bytes of SRAM. Actual battery life still depends on sleep-mode behavior, sensor duty cycle, and regulator efficiency.
ATTINY13 vs ATTINY85: which microcontroller is better for a small project?
The ATTINY13-20MU is appropriate when a design needs only 20 MHz, 1 KB of Flash, 64 bytes of EEPROM, and 64 bytes of SRAM in a compact 20-QFN-EP package. The ATTINY85 offers a different capacity profile and is often selected when more program memory, RAM, and peripheral resources are required. Compare memory requirements and package size rather than treating the two devices as interchangeable.
What can replace ATTINY13-20MU?
The closest identified replacement is the Microchip Technology ATTINY13A-MU, which uses the same 20-QFN-EP 4 mm × 4 mm footprint and retains the 20 MHz, 1 KB Flash, 64-byte EEPROM, and 64-byte SRAM resource levels. Because firmware and device-specific behavior must remain compatible, review the Microchip Technology datasheets and validate the complete design before substituting it. No verified cross-brand drop-in replacement was identified.
Is ATTINY13-20MU the same as ATTINY13A-MU?
The ATTINY13A-MU is a same-package replacement candidate for the ATTINY13-20MU because both are listed in the 20-QFN-EP 4 mm × 4 mm format and share 20 MHz, 1 KB Flash, 64-byte EEPROM, and 64-byte SRAM ratings. They are not identical ordering codes. Review the manufacturer datasheets for revisions, peripheral details, timing, qualification, and programming requirements before production use.
When should I choose ATTINY13-20MU instead of ATTINY13A-MU?
Choose the ATTINY13-20MU when its exact ordering code, documented electrical limits, and qualification status match an existing design. Choose the ATTINY13A-MU when the newer family member provides the required capabilities while preserving the same 20-QFN-EP footprint and core memory ratings. The measurable flash, EEPROM, and SRAM differences are 0%, so qualification and device documentation remain the deciding factors.
What is the best Microchip Technology equivalent for ATTINY13-20MU?
The ATTINY13A-MU is the best-supported Microchip Technology equivalent identified for the ATTINY13-20MU because it matches the 20-QFN-EP 4 mm × 4 mm package and the 20 MHz, 1 KB Flash, 64-byte EEPROM, and 64-byte SRAM ratings. No verified cross-brand drop-in device was identified in the available cross-reference results. Confirm pinout, programming, and device-specific behavior in the manufacturer documentation before substitution.
How do you program an ATTINY13-20MU?
The ATTINY13-20MU should be programmed through the serial programming interface described in the Microchip Technology manufacturer datasheet. The exact signal names, programming voltage, clock requirements, and connector arrangement must be taken from that document and the selected programmer documentation. Because this device is only 1 KB, verify the compiled image size and preserve the correct fuse and clock configuration for a 20 MHz target.
Can ATTINY13-20MU replace ATTINY13-20MUR?
The ATTINY13-20MUR and ATTINY13-20MU identify the same electrical device in different orderable packaging forms, but the manufacturer suffix must match the PCB assembly method and reel orientation. A reel-packed component is not a separate functional upgrade. Confirm the complete MPN, package drawing, tape-and-reel orientation, and exposed-pad requirements before treating the ordering codes as interchangeable.
Where to buy ATTINY13-20MU online?
The ATTINY13-20MU can be requested through the Request a Quote form on this page. Submit the exact MPN ATTINY13-20MU, the required quantity, and your delivery location so current commercial terms can be confirmed for the 20-QFN-EP device. Include a target reel or tray preference and the date by which the components are needed when requesting a quotation.
What is the price and lead time of ATTINY13-20MU?
Current unit pricing and lead time for the ATTINY13-20MU should be obtained through the Request a Quote form on this page. State the exact 20-QFN-EP ordering code, quantity, packaging preference, delivery country, and required date. The component listing identifies an exact Microchip Technology device with 1 KB Flash, 64-byte EEPROM, 64-byte SRAM, and a 20 MHz clock, allowing the quotation request to identify the correct item.

Data referensi kejuruteraan untuk ATTINY13-20MU — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ATTINY13-20MU for new or existing designs that specifically call for this ordering code, particularly compact sensor, LED, appliance-control, and educational projects. Its 20 MHz AVR core, integrated ADC, and 1 KB Flash are sufficient when application code is concise, while the 20-QFN-EP package supports dense layouts. Consider the ATTINY13A-MU when a same-footprint Microchip Technology device is desired; the identified comparison shows identical 20 MHz, Flash, EEPROM, SRAM, voltage, ADC, and package ratings, but device documentation must still confirm that revised electrical behavior, qualification, and programming requirements meet the application. Avoid larger ATtiny devices when board area and 20 MHz performance are sufficient because they can introduce unused memory and peripheral complexity. No cross-brand drop-in alternative was verified, so a redesign should not be assumed for an unverified substitute.

Perbandingan dengan Gantian

Parametr Produk Ini ATTINY13A-MU
Brand Microchip Technology Microchip Technology
Package 20-QFN-EP (4 mm × 4 mm) 20-QFN-EP (4 mm × 4 mm)
Core Architecture 8-bit AVR 8-bit AVR
Maximum Clock Frequency 20 MHz 20 MHz
Flash Memory 1 KB 1 KB
EEPROM 64 bytes 64 bytes
SRAM 64 bytes 64 bytes
Operating Voltage 2.7 V to 5.5 V 2.7 V to 5.5 V
ADC Integrated Integrated

Penyeberangsung Jelas

  • Exact 20 MHz performance and memory profile in a compact package (vsATTINY13A-MU)
  • Integrated ADC reduces external analog-conversion hardware (vsATTINY13A-MU)
  • Low-voltage operation supports compact embedded systems (vsATTINY13A-MU)
  • Minimal package footprint supports dense PCB layouts (vsATTINY13A-MU)

Catatan Desain

Use the manufacturer QFN-EP land pattern exactly and confirm whether the exposed pad is connected to ground, a supply rail, or left according to the recommended footprint. Place input and output decoupling capacitors close to their corresponding pins, and reserve short, directly routed programming signals. Inspect the 4 mm × 4 mm assembly for bridging between closely spaced terminals and avoid placing tall components where they can interfere with rework.

Design the supply rail for the selected operating range of 2.7 V to 5.5 V and account for startup, ADC reference stability, and external load current. Keep analog and digital return paths controlled so ADC readings are not unnecessarily disturbed by switching activity. A low-power design should also account for the MCU's operating mode, external sensor duty cycle, and regulator quiescent current rather than relying only on the 20 MHz clock rating.

Program-memory and RAM exhaustion are the principal practical constraints of this 1 KB Flash and 64-byte SRAM device. Avoid large frameworks and unused library functions, and test the final linked image before committing PCB production. Also verify clock and fuse settings, reset behavior, programming voltage, and pin functions against the manufacturer documentation. A same-footprint replacement cannot be approved solely from package dimensions.

The exposed pad provides the primary heat-spreading path, but its effectiveness depends on the PCB copper and assembly process. Use the manufacturer's recommended exposed-pad geometry and thermal-via arrangement rather than creating isolated vias outside the prescribed footprint. At low clock rates and low device utilization, thermal stress is generally modest, yet the exposed pad should still be soldered and connected as specified for mechanical and electrical consistency.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The component listing explicitly identifies the ATTINY13-20MU as RoHS compliant; no additional compliance declarations are stated.

Data disahkan pada: 2026-11-19 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

attiny13 pinout attiny13 datasheet attiny13 vs attiny85 attiny13 price attiny13 projects attiny13 arduino attiny13 smd attiny13 programming attiny13 programmer ATTINY13-20MU datasheet ATTINY13-20MU pinout ATTINY13-20MU equivalent ATTINY13-20MU replacement ATTINY13-20MU price

Komponen dan Tanda berkaitan

Microchip Technology ATTINY13-20MU ATTINY13A-MU AVR 8-bit microcontroller embedded controller programmable logic device semiconductor Flash memory EEPROM SRAM analog-to-digital converter 20-QFN-EP QFN family surface-mount technology exposed thermal pad serial programming interface RoHS sensor node LED control battery-powered embedded system
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ