Microchip Technology

ATXMEGA32D4-MN - 32MHz 32KB Flash MCU | Microchip

MPN: ATXMEGA32D4-MN ✓ Aktif
44-VQFN, 7 x 7 mm Package 32 MHz Speed 32 KB (16K x 16) Memory
MOQ: 1 |

ATXMEGA32D4-MN Ringkasan

Microchip Technology ATXMEGA32D4-MN is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 32 KB of in-system-programmable Flash, 1 KB of EEPROM, and 4 KB of SRAM in a 44-VQFN 7 x 7 mm package. It combines a 34-pin general-purpose I/O interface with a four-channel event system and programmable multilevel interrupt controller for responsive embedded control.

An 8/16-bit MCU is a compact microcontroller architecture that executes instruction words efficiently while supporting both 8-bit and 16-bit operations. The AVR XMEGA D4 family combines a high-performance AVR core, event-system peripherals, timing counters, serial interfaces, and flexible pin multiplexing within a single embedded-control IC.

The device provides 32 KB of Flash organized as 16K x 16, including a dedicated 4 KB boot-code section and read-while-write capability. Its 1 KB EEPROM supports nonvolatile configuration or calibration data, while 4 KB of SRAM provides working memory for control logic, communication buffers, and real-time tasks.

Peripheral integration includes a 16-bit real-time counter, four flexible 16-bit timer/counters with compare and PWM channels, two USARTs, and two two-wire serial interfaces. The four-channel event system and programmable multilevel interrupt controller help connect timers, communication peripherals, and external signals without relying entirely on software polling.

Typical uses include industrial control modules, compact sensor nodes, building equipment, data-logging instruments, and low-power embedded products requiring a balance of computational performance, serial connectivity, event handling, and a relatively compact surface-mount footprint.

PCB design should preserve the package-specific land pattern, provide clean power and ground connections, and route sensitive timing and communication signals away from fast-switching nodes. Firmware design should also account for the dedicated boot section, interrupt priority levels, event-system routing, and the distinction between Flash, EEPROM, and SRAM when planning updates and data retention.

This product page combines the manufacturer's XMEGA D4 specifications with a package-aware comparison, same-family alternatives, application guidance, and practical design notes. These resources support faster engineering evaluation while preserving the need to validate timing, firmware compatibility, and board-level requirements before production release.

Pilihan pengganti yang segera untuk ATXMEGA32D4-MN — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ATXMEGA32D4-MN (sama faktor bentuk dan kaki) — berbeza dalam EEPROM Memory, Package, Timer/Counter Count, USART Count.

Microchip Technology
EEPROM Memory: 2 KB
Package: 44-pin VQFN, 7 x 7 mm
Timer/Counter Count: 4 timers/counters at 16-bit resolution
Bandingkan Dengan ATXMEGA32D4-MN →

ATXMEGA16D4-MN

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 VQFN-44 (7x7 mm)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 16 KB · 4 KB · Supported · 1 KB · 2 KB · 4 channels

Hubungi untuk harga

Lihat Datasheet →

ATXMEGA64D4-MN

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
Microchip Technology
📦 VQFN-44 (7x7 mm)
8/16-bit AVR XMEGA microcontroller · 32 MHz · 64 KB · 4 KB · 2 KB · 4 KB · 34 lines · 4 channels

Hubungi untuk harga

Lihat Datasheet →

ATXMEGA128D4-MN

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 VQFN-44 (7x7 mm)
Flash is 128 KB versus 32 KB, a 96 KB or 300% increase; same-family architecture with substantially greater firmware storage

📋 Alternatif rujukan (tidak dalam katalog)

ATXMEGA32D4-MN Penilaian maksimum & Ciri-ciri Elektrik

Product Type 8/16-bit AVR XMEGA microcontroller
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB (16K x 16)
Boot Code Section 4 KB
Flash Read-While-Write Supported
EEPROM Memory 1 KB
SRAM Memory 4 KB
General-Purpose I/O Lines 34
Event System 4 channels
Programmable Interrupt Levels Multilevel
Real-Time Counter 16-bit
Timer/Counter Count 4
Timer/Counter Resolution 16-bit
USART Count 2
Two-Wire Serial Interface Count 2
In-System Programming Supported
Kemasan 44-VQFN, 7 x 7 mm
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin ATXMEGA32D4-MN 44-vqfn, 7 x 7 mm

Konfigurasi pin untuk ATXMEGA32D4-MN (44-vqfn, 7 x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 44-vqfn, 7 x 7 mm untuk ATXMEGA32D4-MN

Tiada data garisan pin yang diperoleh untuk ATXMEGA32D4-MN.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ATXMEGA32D4-MN patut untuk 6 aplikasis: Industrial Control Module, Sensor and IoT Node, Building Equipment Controller, Data Logging Instrument, Communications Interface Module, Low-Power Embedded Product.

🏭

Industrial Control Module

The ATXMEGA32D4-MN fits compact industrial control modules that coordinate sensors, actuators, and operator interfaces. Its four 16-bit timer/counters provide dedicated resources for pulse-width modulation, input capture, and periodic control, while the 32 MHz core leaves processing headroom for state machines and communications. Two USARTs can connect to local sensors or service ports, and the two-wire serial interfaces support a controller bus. Its 1 KB EEPROM can retain calibration values or operating counters. During PCB design, verify the exact pin multiplex requirements and provide a stable power rail with careful grounding around serial and timing signals.

🧩

Sensor and IoT Node

The ATXMEGA32D4-MN supports compact sensor nodes that need flexible event handling without a large external peripheral set. A four-channel event system can route timer, comparator, and external events directly to peripherals, reducing the need for continuous software polling. The 34 GPIO lines provide attachment points for sensors and digital controls, while two TWI interfaces can organize multiple bus nodes and two USARTs can carry local sensor traffic. At 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM, the device supports moderate edge-processing and persistent configuration. Firmware should use sleep modes and peripheral event routing to reduce active processing time in battery-operated designs.

🏭

Building Equipment Controller

The ATXMEGA32D4-MN is appropriate for building equipment controllers that coordinate timers, serial peripherals, and local logic. Multiple 16-bit timers can generate actuator timing, measure intervals, or create PWM outputs, while the programmable multilevel interrupt controller supports prompt handling of multiple hardware events. The 4 KB boot-code section is useful for protecting startup and recovery logic, and EEPROM can store configuration values without consuming RAM. Its two-wire serial interfaces support connection to building-network transceivers or sensor modules, while the USARTs can serve diagnostics. Final deployment should verify voltage and temperature limits, isolation requirements, firmware update procedures, and functional-safety needs relevant to the controlled equipment.

📟

Data Logging Instrument

The ATXMEGA32D4-MN can serve as the control core of a compact data-logging instrument that records sensor events and communicates with a host. The 16-bit real-time counter provides a dedicated timebase for timestamping, and the four general timer/counters can handle periodic sampling, compare events, or PWM-assisted sensing. Two USARTs allow a host link and an external instrument to coexist, while the two-wire interfaces support sensors and configuration EEPROM. Its 32 KB Flash can hold a boot loader and application, and 1 KB EEPROM can preserve calibration information. The design should establish an appropriate nonvolatile logging strategy because internal SRAM is limited to 4 KB.

🌐

Communications Interface Module

The ATXMEGA32D4-MN is suitable for communications interface modules requiring multiple serial channels and deterministic event handling. Two USARTs support two independent point-to-point links, and two two-wire serial interfaces provide bus-oriented connectivity. The four-channel event system can trigger actions from timer or external events, while the multilevel interrupt controller helps prioritize incoming activity. The 32 MHz core supports protocol handling and framing, and the separate 4 KB boot-code section can protect communications initialization or recovery code. PCB implementation should separate interface routing from sensitive timing paths and verify termination, pull-up, and logic-level requirements for each external bus.

📱

Low-Power Embedded Product

The ATXMEGA32D4-MN is useful in low-power embedded products where local control, serial connectivity, and nonvolatile data must coexist in a small footprint. Four timers can wake or time control operations, the event system can reduce software polling, and the 1 KB EEPROM can preserve configuration without external memory. A 32 MHz core provides useful processing capacity for local decisions, while 4 KB SRAM supports protocol buffers and state. Designers should enable suitable sleep modes, disable unused peripherals, and select the lowest practical clock configuration. Power performance must be characterized with the actual operating-voltage range and peripheral workload because overall energy use is determined by the complete firmware cycle.

What are the key specifications of ATXMEGA32D4-MN that engineers should know?
The ATXMEGA32D4-MN is a 32 MHz, 8/16-bit AVR XMEGA MCU with 32 KB of Flash, 1 KB of EEPROM, 4 KB of SRAM, and 34 GPIO lines in a 44-VQFN package. According to the Microchip ATxmega16D4, 32D4, 64D4, and 128D4 datasheet, it also provides a four-channel event system, a 16-bit real-time counter, four 16-bit timer/counters, two USARTs, and two two-wire serial interfaces. Its 4 KB boot section supports protected startup code while the main Flash supports read-while-write operation.
Where can I download the ATXMEGA32D4-MN datasheet PDF?
The manufacturer-hosted ATXMEGA32D4-MN datasheet PDF is available through Microchip Technology's device document for the AVR XMEGA D4 family. The document covers ATxmega16D4, ATxmega32D4, ATxmega64D4, and ATxmega128D4 devices. Use that PDF for the authoritative pin description, electrical characteristics, package drawing, interrupt system, event-system routing, and programming information. The ATXMEGA32D4-MN order code specifically identifies the 44-VQFN 7 x 7 mm package configuration.
Where can I find the ATXMEGA32D4-MN pinout and package drawing?
The ATXMEGA32D4-MN pinout and package drawing are in the Microchip AVR XMEGA D4 family datasheet under the device pin description and package information sections. The distributor listing identifies the component as a 44-VQFN 7 x 7 mm device. Confirm every signal, power pin, and exposed-pad connection against the manufacturer's pin-description table before routing a PCB because package suffixes can identify different lead configurations or temperature and packing options.
How much Flash, SRAM, and EEPROM does ATXMEGA32D4-MN have?
The ATXMEGA32D4-MN provides 32 KB of Flash, 4 KB of SRAM, and 1 KB of EEPROM. The Flash is organized as 16K x 16 and includes a separate 4 KB boot-code section. According to the Microchip XMEGA D4 datasheet, the memory supports read-while-write operation and in-system programming. This combination gives embedded firmware room for application code, boot logic, nonvolatile parameters, and working state without requiring an external memory device for moderate control workloads.
What serial and timing peripherals are integrated in ATXMEGA32D4-MN?
The ATXMEGA32D4-MN integrates two USARTs, two two-wire serial interfaces, one 16-bit real-time counter, and four flexible 16-bit timer/counters with compare and PWM channels. It also has a four-channel event system and programmable multilevel interrupt controller. These resources allow a design to connect periodic timers, serial traffic, and external events efficiently, reducing polling overhead and simplifying deterministic control logic.
Is ATXMEGA32D4-MN suitable for low-power embedded control?
The ATXMEGA32D4-MN is suitable for compact embedded-control designs that benefit from integrated timers, serial interfaces, event routing, and local nonvolatile memory. Its 32 MHz performance and 32 KB Flash provide room for moderately complex firmware, while 1 KB of EEPROM can retain calibration or configuration values. Actual battery life depends on the selected operating mode, clock configuration, peripheral activity, and sleep strategy, so those conditions must be evaluated in the intended system.
ATXMEGA32D4-MN vs ATXMEGA64D4-MN - which is better for memory-intensive firmware?
ATXMEGA64D4-MN is the better choice when code or data growth makes the target's 32 KB Flash insufficient, because it provides twice the Flash of ATXMEGA32D4-MN. The ATXMEGA32D4-MN remains appropriate when its 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM meet the workload and minimizing board cost or firmware footprint is important. Both parts belong to the AVR XMEGA D4 family and share the same core and peripheral architecture, but firmware memory capacity and board requirements should be reviewed before substitution.
ATXMEGA32D4-MN vs ATXMEGA16D4-MN - which should be selected?
Select ATXMEGA32D4-MN when application firmware, boot code, or update storage may exceed the ATXMEGA16D4-MN's 16 KB Flash capacity. Choose ATXMEGA16D4-MN when the smaller memory footprint is sufficient and lower resource usage is a design priority. Both devices use the AVR XMEGA D4 architecture and support in-system programming, read-while-write Flash, event handling, timers, USART, and two-wire serial connectivity. Firmware size and runtime RAM requirements should determine the final choice.
When should I choose ATXMEGA32D4-MN over a larger XMEGA D4 device?
Choose ATXMEGA32D4-MN when a design fits within 32 KB of Flash, 4 KB of SRAM, and 1 KB of EEPROM while still needing the D4 family's event system, multilevel interrupts, four 16-bit timers, two USARTs, and two two-wire interfaces. Move to a 64 KB or 128 KB D4 variant only when measured firmware growth, data logging, update requirements, or future feature expansion makes the smaller memory budget inadequate.
Is ATXMEGA32D4-MN suitable for an industrial control application?
ATXMEGA32D4-MN is suitable for many compact industrial-control tasks because it combines a 32 MHz AVR core, four timers with PWM and compare channels, two USARTs, two two-wire serial interfaces, event routing, and a multilevel interrupt controller. Its 4 KB boot section can protect initialization code, while EEPROM supports persistent parameters. Final suitability depends on the specified voltage and temperature limits, EMC requirements, isolation needs, and the long-term availability commitments for the selected ordering code.
What is the best drop-in replacement for ATXMEGA32D4-MN?
ATXMEGA64D4-MN is the closest same-family drop-in candidate when the 44-VQFN footprint and pin arrangement are verified, because it retains the AVR XMEGA D4 architecture while doubling Flash from 32 KB to 64 KB. ATXMEGA128D4-MN is another larger-memory candidate, and ATXMEGA16D4-MN is the smaller-memory direction. A replacement is appropriate only after confirming the exact pinout, voltage range, peripheral configuration, boot behavior, timing, temperature grade, and firmware compatibility.
Can ATXMEGA64D4-MN replace ATXMEGA32D4-MN without changing the PCB?
ATXMEGA64D4-MN can serve as a same-family replacement when the manufacturer confirms the same 44-VQFN land pattern and the required pins retain compatible functions. Its key difference is Flash capacity: 64 KB versus 32 KB, a 32 KB increase or 100% growth. SRAM, EEPROM, clocking, peripheral use, and application behavior must still be checked in the datasheet, and existing firmware should be rebuilt and tested against the replacement device.
What can replace ATXMEGA32D4-MN?
Same-family replacements for ATXMEGA32D4-MN include ATXMEGA16D4-MN, ATXMEGA64D4-MN, and ATXMEGA128D4-MN when their 44-VQFN pin arrangements and electrical limits are confirmed. These devices preserve the AVR XMEGA D4 product-family architecture but differ materially in Flash capacity: 16 KB, 32 KB, 64 KB, and 128 KB respectively for the target and three alternatives. A different manufacturer's MCU should not be treated as a drop-in replacement without complete pin, clock, memory, peripheral, toolchain, and software validation.
Where can I buy ATXMEGA32D4-MN and request current lead time?
Use the Request a Quote form on this page to request ATXMEGA32D4-MN pricing, current lead time, stock status, and order quantities. The manufacturer product page and authorized distributor listings confirm that the exact 44-VQFN ordering code is catalogued, but a current commercial quotation is required for actionable availability. Specify the desired package form, temperature grade, and annual quantity so the sourcing request can be evaluated accurately.
What is the price of ATXMEGA32D4-MN?
The current commercial price for ATXMEGA32D4-MN should be requested through the Request a Quote form on this page. The component is listed as a 32 MHz, 32 KB Flash AVR XMEGA D4 microcontroller in a 44-VQFN 7 x 7 mm package, but live pricing varies with quantity, procurement conditions, and supply status. Submit the required quantity, target date, and approved part number to obtain a current quotation.

Data referensi kejuruteraan untuk ATXMEGA32D4-MN — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose ATXMEGA32D4-MN when the application fits within 32 KB of Flash, 4 KB of SRAM, and 1 KB of EEPROM but benefits from the XMEGA D4 family's event system, multilevel interrupts, four 16-bit timers, two USARTs, and two two-wire interfaces. Select ATXMEGA16D4-MN when its smaller Flash area is sufficient and minimizing memory consumption matters. Choose ATXMEGA64D4-MN when firmware growth, boot code, or application features require twice the Flash, and ATXMEGA128D4-MN when substantially more code or data storage is justified. All three alternatives are same-family candidates rather than cross-brand devices. Before replacement, verify the exact 44-VQFN pin arrangement, electrical limits, peripheral differences, temperature grade, and application firmware behavior against the manufacturer datasheet.

Perbandingan dengan Gantian

Parametr Produk Ini ATXMEGA16D4-MN ATXMEGA64D4-MN ATXMEGA128D4-MN
Package VQFN-44 (7x7 mm) VQFN-44 (7x7 mm) VQFN-44 (7x7 mm) VQFN-44 (7x7 mm)
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB (16K x 16) 16 KB 64 KB 128 KB
EEPROM Memory 1 KB 1 KB 1 KB 4 KB
General-Purpose I/O Lines 34 34 34 34
Event System 4 channels 4 channels 4 channels 8 channels
Real-Time Counter 16-bit 16-bit 16-bit 16-bit
Timer/Counter Count 4 4 4 4
USART Count 2 2 2 2

Penyeberangsung Jelas

  • Balanced memory configuration (vsATXMEGA16D4-MN)
  • Moderate firmware capacity without the largest family footprint (vsATXMEGA128D4-MN)
  • Substantial expansion path within one XMEGA D4 family (vsATXMEGA64D4-MN)
  • Four-channel event system matched to compact embedded control (vsATXMEGA128D4-MN)

Catatan Desain

Use the 44-VQFN land pattern and exposed-pad connection specified by the manufacturer. Keep the power and ground pins close to their associated return paths, provide adequate plane connectivity under the device, and route high-speed or timing-sensitive signals away from switching nodes and noisy peripherals. Do not infer a generic QFN pad layout from the 7 x 7 mm body size; verify pin numbering, pad dimensions, thermal-via recommendations, and exposed-pad requirements against the package drawing before fabrication.

Decouple each supply domain with capacitors selected from the datasheet's recommended values and voltage ratings, and place them adjacent to the relevant pins. Confirm the exact operating-voltage range, current consumption, and internal peripheral connection requirements before finalizing the power tree. If the board combines this MCU with switching converters or radio circuitry, separate sensitive power routing from high-di/dt paths and evaluate supply ripple at the pins rather than relying only on the schematic connection.

Assign peripheral functions early because the 34 GPIO lines are multiplexed among timers, USART, two-wire serial, event-system, and interrupt functions. Check the pin-description table and alternate-function matrix before final routing. For oscillator, clock, programming, and reset nets, preserve the required trace geometry, component placement, and isolation from switching nodes. Confirm all programming and recovery pins remain accessible on the assembled board.

Do not assume that equal Flash package suffixes make different ATxmega devices interchangeable. Compare the exact pin list, peripheral counts, memory sizes, voltage limits, timing limits, boot behavior, and temperature grade. ATXMEGA16D4-MN, ATXMEGA64D4-MN, and ATXMEGA128D4-MN are same-family candidates with different memory resources, so firmware-size, EEPROM, and event-system requirements can change the correct selection. Rebuild and validate production firmware for the exact replacement order code.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit compliance declaration for the ATXMEGA32D4-MN ordering code was present in the manufacturer product page or manufacturer datasheet listing.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ATXMEGA32D4-MN datasheet ATXMEGA32D4-MN pinout ATXMEGA32D4-MN datasheet pdf ATXMEGA32D4-MN specifications ATXMEGA32D4-MN equivalent ATXMEGA32D4-MN replacement ATXMEGA32D4-MN cross reference ATXMEGA32D4-MN vs ATXMEGA64D4-MN ATXMEGA32D4-MN footprint ATXMEGA32D4-MN price ATXMEGA32D4-MN stock Microchip ATXMEGA32D4-MN ATXMEGA32D4-MN application circuit

Komponen dan Tanda berkaitan

Microchip Technology ATXMEGA32D4-MN ATXMEGA32D4 ATXMEGA16D4-MN ATXMEGA64D4-MN ATXMEGA128D4-MN AVR XMEGA D4 AVR 8/16-bit microcontroller embedded microcontroller semiconductor 32 MHz 32 KB Flash 1 KB EEPROM 4 KB SRAM 44-VQFN QFN family surface mount SMD event system programmable multilevel interrupt controller 16-bit real-time counter timer/counter PWM USART two-wire serial interface in-system programming read-while-write industrial control sensor node
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ