ATXMEGA32D4-MN - 32MHz 32KB Flash MCU | Microchip
N.º de pieza: ATXMEGA32D4-MN ✓ ActivoATXMEGA32D4-MN Descripción general
An 8/16-bit MCU is a compact microcontroller architecture that executes instruction words efficiently while supporting both 8-bit and 16-bit operations. The AVR XMEGA D4 family combines a high-performance AVR core, event-system peripherals, timing counters, serial interfaces, and flexible pin multiplexing within a single embedded-control IC.
The device provides 32 KB of Flash organized as 16K x 16, including a dedicated 4 KB boot-code section and read-while-write capability. Its 1 KB EEPROM supports nonvolatile configuration or calibration data, while 4 KB of SRAM provides working memory for control logic, communication buffers, and real-time tasks.
Peripheral integration includes a 16-bit real-time counter, four flexible 16-bit timer/counters with compare and PWM channels, two USARTs, and two two-wire serial interfaces. The four-channel event system and programmable multilevel interrupt controller help connect timers, communication peripherals, and external signals without relying entirely on software polling.
Typical uses include industrial control modules, compact sensor nodes, building equipment, data-logging instruments, and low-power embedded products requiring a balance of computational performance, serial connectivity, event handling, and a relatively compact surface-mount footprint.
PCB design should preserve the package-specific land pattern, provide clean power and ground connections, and route sensitive timing and communication signals away from fast-switching nodes. Firmware design should also account for the dedicated boot section, interrupt priority levels, event-system routing, and the distinction between Flash, EEPROM, and SRAM when planning updates and data retention.
This product page combines the manufacturer's XMEGA D4 specifications with a package-aware comparison, same-family alternatives, application guidance, and practical design notes. These resources support faster engineering evaluation while preserving the need to validate timing, firmware compatibility, and board-level requirements before production release.
Alternativas directas para ATXMEGA32D4-MN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
Variantes de esta serie
Modelos de la misma serie compatibles directamente con ATXMEGA32D4-MN (mismo factor de forma y huella) — difiere en EEPROM Memory, Package, Timer/Counter Count, USART Count.
ATXMEGA16D4-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ATXMEGA64D4-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ATXMEGA128D4-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATXMEGA32D4-MN Valores máximos y características eléctricas
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB (16K x 16) |
| Boot Code Section | 4 KB |
| Flash Read-While-Write | Supported |
| EEPROM Memory | 1 KB |
| SRAM Memory | 4 KB |
| General-Purpose I/O Lines | 34 |
| Event System | 4 channels |
| Programmable Interrupt Levels | Multilevel |
| Real-Time Counter | 16-bit |
| Timer/Counter Count | 4 |
| Timer/Counter Resolution | 16-bit |
| USART Count | 2 |
| Two-Wire Serial Interface Count | 2 |
| In-System Programming | Supported |
| Encapsulado | 44-VQFN, 7 x 7 mm |
| Tipo de montaje | Surface mount |
Guía de configuración de pines de ATXMEGA32D4-MN 44-vqfn, 7 x 7 mm
Configuración de pines para ATXMEGA32D4-MN (encapsulado 44-vqfn, 7 x 7 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATXMEGA32D4-MN.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATXMEGA32D4-MN es adecuado para 6 aplicacións: Industrial Control Module, Sensor and IoT Node, Building Equipment Controller, Data Logging Instrument, Communications Interface Module, Low-Power Embedded Product.
Industrial Control Module
The ATXMEGA32D4-MN fits compact industrial control modules that coordinate sensors, actuators, and operator interfaces. Its four 16-bit timer/counters provide dedicated resources for pulse-width modulation, input capture, and periodic control, while the 32 MHz core leaves processing headroom for state machines and communications. Two USARTs can connect to local sensors or service ports, and the two-wire serial interfaces support a controller bus. Its 1 KB EEPROM can retain calibration values or operating counters. During PCB design, verify the exact pin multiplex requirements and provide a stable power rail with careful grounding around serial and timing signals.
Recomendado
Sensor and IoT Node
The ATXMEGA32D4-MN supports compact sensor nodes that need flexible event handling without a large external peripheral set. A four-channel event system can route timer, comparator, and external events directly to peripherals, reducing the need for continuous software polling. The 34 GPIO lines provide attachment points for sensors and digital controls, while two TWI interfaces can organize multiple bus nodes and two USARTs can carry local sensor traffic. At 32 KB Flash, 4 KB SRAM, and 1 KB EEPROM, the device supports moderate edge-processing and persistent configuration. Firmware should use sleep modes and peripheral event routing to reduce active processing time in battery-operated designs.
Recomendado
Building Equipment Controller
The ATXMEGA32D4-MN is appropriate for building equipment controllers that coordinate timers, serial peripherals, and local logic. Multiple 16-bit timers can generate actuator timing, measure intervals, or create PWM outputs, while the programmable multilevel interrupt controller supports prompt handling of multiple hardware events. The 4 KB boot-code section is useful for protecting startup and recovery logic, and EEPROM can store configuration values without consuming RAM. Its two-wire serial interfaces support connection to building-network transceivers or sensor modules, while the USARTs can serve diagnostics. Final deployment should verify voltage and temperature limits, isolation requirements, firmware update procedures, and functional-safety needs relevant to the controlled equipment.
Recomendado
Data Logging Instrument
The ATXMEGA32D4-MN can serve as the control core of a compact data-logging instrument that records sensor events and communicates with a host. The 16-bit real-time counter provides a dedicated timebase for timestamping, and the four general timer/counters can handle periodic sampling, compare events, or PWM-assisted sensing. Two USARTs allow a host link and an external instrument to coexist, while the two-wire interfaces support sensors and configuration EEPROM. Its 32 KB Flash can hold a boot loader and application, and 1 KB EEPROM can preserve calibration information. The design should establish an appropriate nonvolatile logging strategy because internal SRAM is limited to 4 KB.
Recomendado
Communications Interface Module
The ATXMEGA32D4-MN is suitable for communications interface modules requiring multiple serial channels and deterministic event handling. Two USARTs support two independent point-to-point links, and two two-wire serial interfaces provide bus-oriented connectivity. The four-channel event system can trigger actions from timer or external events, while the multilevel interrupt controller helps prioritize incoming activity. The 32 MHz core supports protocol handling and framing, and the separate 4 KB boot-code section can protect communications initialization or recovery code. PCB implementation should separate interface routing from sensitive timing paths and verify termination, pull-up, and logic-level requirements for each external bus.
Recomendado
Low-Power Embedded Product
The ATXMEGA32D4-MN is useful in low-power embedded products where local control, serial connectivity, and nonvolatile data must coexist in a small footprint. Four timers can wake or time control operations, the event system can reduce software polling, and the 1 KB EEPROM can preserve configuration without external memory. A 32 MHz core provides useful processing capacity for local decisions, while 4 KB SRAM supports protocol buffers and state. Designers should enable suitable sleep modes, disable unused peripherals, and select the lowest practical clock configuration. Power performance must be characterized with the actual operating-voltage range and peripheral workload because overall energy use is determined by the complete firmware cycle.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATXMEGA32D4-MN — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATXMEGA16D4-MN | ATXMEGA64D4-MN | ATXMEGA128D4-MN |
|---|---|---|---|---|
| Package | VQFN-44 (7x7 mm) | VQFN-44 (7x7 mm) | VQFN-44 (7x7 mm) | VQFN-44 (7x7 mm) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB (16K x 16) | 16 KB | 64 KB | 128 KB |
| EEPROM Memory | 1 KB | 1 KB | 1 KB | 4 KB |
| General-Purpose I/O Lines | 34 | 34 | 34 | 34 |
| Event System | 4 channels | 4 channels | 4 channels | 8 channels |
| Real-Time Counter | 16-bit | 16-bit | 16-bit | 16-bit |
| Timer/Counter Count | 4 | 4 | 4 | 4 |
| USART Count | 2 | 2 | 2 | 2 |
Diferenciadores clave
- Balanced memory configuration (frente a ATXMEGA16D4-MN)
- Moderate firmware capacity without the largest family footprint (frente a ATXMEGA128D4-MN)
- Substantial expansion path within one XMEGA D4 family (frente a ATXMEGA64D4-MN)
- Four-channel event system matched to compact embedded control (frente a ATXMEGA128D4-MN)
Notas de diseño
Use the 44-VQFN land pattern and exposed-pad connection specified by the manufacturer. Keep the power and ground pins close to their associated return paths, provide adequate plane connectivity under the device, and route high-speed or timing-sensitive signals away from switching nodes and noisy peripherals. Do not infer a generic QFN pad layout from the 7 x 7 mm body size; verify pin numbering, pad dimensions, thermal-via recommendations, and exposed-pad requirements against the package drawing before fabrication.
Decouple each supply domain with capacitors selected from the datasheet's recommended values and voltage ratings, and place them adjacent to the relevant pins. Confirm the exact operating-voltage range, current consumption, and internal peripheral connection requirements before finalizing the power tree. If the board combines this MCU with switching converters or radio circuitry, separate sensitive power routing from high-di/dt paths and evaluate supply ripple at the pins rather than relying only on the schematic connection.
Assign peripheral functions early because the 34 GPIO lines are multiplexed among timers, USART, two-wire serial, event-system, and interrupt functions. Check the pin-description table and alternate-function matrix before final routing. For oscillator, clock, programming, and reset nets, preserve the required trace geometry, component placement, and isolation from switching nodes. Confirm all programming and recovery pins remain accessible on the assembled board.
Do not assume that equal Flash package suffixes make different ATxmega devices interchangeable. Compare the exact pin list, peripheral counts, memory sizes, voltage limits, timing limits, boot behavior, and temperature grade. ATXMEGA16D4-MN, ATXMEGA64D4-MN, and ATXMEGA128D4-MN are same-family candidates with different memory resources, so firmware-size, EEPROM, and event-system requirements can change the correct selection. Rebuild and validate production firmware for the exact replacement order code.
Información de cumplimiento
No explicit compliance declaration for the ATXMEGA32D4-MN ordering code was present in the manufacturer product page or manufacturer datasheet listing.