ATXMEGA32E5-AU 32MHz 32KB AVR MCU | Microchip Technology
MPN: ATXMEGA32E5-AU ✓ AktifATXMEGA32E5-AU Ringkasan
A microcontroller is an integrated semiconductor containing a processor core, program memory, data memory, and peripherals on one device. The ATXMEGA32E5 belongs to the hierarchy of 8/16-bit AVR embedded controllers, XMEGA microcontrollers, microcontrollers, and integrated circuits. Its enhanced RISC architecture combines a wide register file with event-driven peripherals, making it suitable for real-time control systems where predictable external event handling is important.
The E5 family combines 32 KB of Flash with 1 KB of EEPROM and 4 KB of SRAM. Read-while-write capability allows the program Flash region to remain accessible during programming operations, while the separate boot section supports boot-loader designs. An eight-channel event system and programmable multi-level interrupts help connect timers, communication interfaces, external signals, and application logic without excessive polling.
The operating supply range is 1.6 V to 3.3 V, allowing the controller to operate across low-voltage embedded systems. The ATXMEGA32E5-AU ordering code is associated with a 32-pin TQFP package and an industrial-temperature, green-product configuration according to the distributor product description. Its 32 MHz maximum frequency provides substantially more processing headroom than conventional 8-bit AVR devices while retaining the AVR instruction set and ecosystem.
Typical applications include industrial sensor controllers, building automation equipment, compact data acquisition systems, motor and actuator controllers, communication equipment, and low-power embedded products. The combination of event-system hardware, flash memory, and multiple serial peripherals is particularly useful when a design must respond to external events with deterministic timing while keeping the software structure relatively compact.
Designers should confirm the complete pin assignment and peripheral multiplexing in the manufacturer datasheet before routing a board. Decoupling, programming-interface access, clock configuration, exposed analog functions, and the selected package dimensions should be reviewed together, especially when the operating voltage is near 1.6 V.
This product page combines the manufacturer specifications, package information, functional application guidance, comparison points, and drop-in candidates identified from family documentation. It also distinguishes exact-memory options from lower-memory XMEGA E5 variants so engineers can assess PCB reuse without assuming that every family member has identical firmware requirements.
Pilihan pengganti yang segera untuk ATXMEGA32E5-AU — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera ATXMEGA32E5-AU (sama faktor bentuk dan kaki) — berbeza dalam Package, Boot Code Section, EEPROM, SRAM, Operating Supply Voltage.
ATXMEGA16E5-AN
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATXMEGA16E5-AUR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
ATXMEGA8E5-AU
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →ATXMEGA32E5-AU Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8/16-bit RISC Microcontroller |
| Architecture | AVR enhanced RISC |
| Series | AVR XMEGA E5 |
| Frekuensi Klock Maksimum | 32 MHz |
| Program Flash Memory | 32 KB |
| Boot Code Section | 4 KB |
| Flash Read-While-Write | Supported |
| EEPROM | 1 KB |
| SRAM | 4 KB |
| Event System Channels | 8 channels |
| Tegangan Pemberi Arus Operasi | 1.6 V to 3.3 V |
| Kemasan | 32-pin TQFP |
| Package Dimensions | 7 mm x 7 mm |
| Jenis Pemasangan | Surface Mount |
| Temperature Grade | Industrial temperature |
| Product Classification | Green |
| Programmable Event System | Multi-level programmable |
Panduan Konfigurasi Pin ATXMEGA32E5-AU 7 mm x 7 mm
Konfigurasi pin untuk ATXMEGA32E5-AU (7 mm x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk ATXMEGA32E5-AU.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
ATXMEGA32E5-AU patut untuk 6 aplikasis: Industrial Sensor and Condition Monitoring, Building Automation Controller, Compact Motor and Actuator Control, Battery-Powered Data Acquisition Module, Communication Interface and Protocol Hub, Programmable Logic Controller.
Industrial Sensor and Condition Monitoring
The ATXMEGA32E5-AU fits industrial sensor nodes that acquire measurements, evaluate thresholds, and report status over a local communication link. Its 32 MHz AVR core provides useful control bandwidth, while the 1 KB EEPROM preserves configuration parameters and the 4 KB SRAM supports working buffers. The eight-channel event system can connect timer events, external interrupts, and peripheral activity without continuous polling, improving responsiveness in systems with multiple asynchronous inputs. Operating from 1.6 V to 3.3 V also permits integration with low-voltage sensors and low-voltage I/O rails. Firmware should be partitioned to preserve room in the 32 KB Flash region for calibration, logging, and future protocol updates.
Disebarkan
Building Automation Controller
The ATXMEGA32E5-AU can act as a centralized controller for lighting, occupancy, temperature, and access-control subsystems in a building automation network. Its event system allows timers and external inputs to be routed directly among peripherals, which is useful when many loads must be updated according to schedules or immediate events. The 32 KB Flash provides room for protocol stacks and application logic, while the separate 4 KB boot section supports controlled firmware recovery. At the 1.6 V to 3.3 V operating range, the device can operate from low-voltage distribution rails, although relay drivers and isolated communication interfaces require suitable external circuitry.
Disebarkan
Compact Motor and Actuator Control
The ATXMEGA32E5-AU is suitable for compact motor and actuator controllers where deterministic event handling is more valuable than a high-bit-rate processor. Timers and the eight-channel event system can coordinate commutation, position events, limit switches, and control-loop updates, while the 32 MHz core executes proportional or state-machine control. The 32 KB Flash capacity supports more elaborate motion logic than lower-memory XMEGA E5 variants. Its 1.6 V to 3.3 V supply range simplifies low-voltage logic integration, but power-stage transistors, current sensing, flyback protection, and any safety shutdown path must be designed separately.
Disebarkan
Battery-Powered Data Acquisition Module
The ATXMEGA32E5-AU can serve as the processing center of a compact, battery-powered data-acquisition module. The 32 MHz core allows local filtering and feature extraction, while 4 KB of SRAM accommodates temporary measurement buffers and 1 KB of EEPROM stores calibration constants or operating counters. Read-while-write Flash may simplify controlled firmware updates, and the 1.6 V minimum operating voltage is useful for low-voltage battery-derived rails. Power efficiency still depends on the selected sleep modes, peripheral activity, and external sensor loads. The final design should isolate analog inputs, provide suitable decoupling, and account for the acquisition chain's current consumption during active sampling.
Disebarkan
Communication Interface and Protocol Hub
The ATXMEGA32E5-AU can serve as a compact protocol hub or line-interface controller when one physical link must be translated, monitored, or coordinated with another. Its 32 MHz processing rate supports framing, buffering, diagnostics, and background protocol processing, while the eight-channel event system helps synchronize transmission, reception, timeouts, and external control signals. The separate boot section is useful for bootloader-based field upgrades, and read-while-write Flash can assist maintenance workflows. The exact USART, SPI, and other interface capabilities must be confirmed in the device pin and peripheral tables before assigning signals. External transceivers are still required for line levels, isolation, impedance, and ESD protection.
Disebarkan
Programmable Logic Controller
The ATXMEGA32E5-AU is appropriate for small programmable logic controllers handling discrete inputs, timed outputs, interlocks, and communication tasks. Its event system can connect external transitions and internal timer events, reducing the processing delay associated with polling. With 32 KB of Flash, 4 KB of SRAM, and a 1 KB EEPROM, the device can support structured control logic plus local configuration storage. The 1.6 V to 3.3 V supply range fits modern low-voltage control electronics, while the 32-pin TQFP package supports compact board layouts. Industrial deployment should add appropriate input protection, output drive circuitry, isolation where required, and validated watchdog and brownout behavior.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk ATXMEGA32E5-AU — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | ATXMEGA16E5-AN | ATXMEGA16E5-AUR | ATXMEGA8E5-AU |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 32-pin TQFP | 32-pin TQFP - same | 32-pin TQFP - same | 32-pin TQFP - same |
| Product Family | AVR XMEGA E5 | AVR XMEGA E5 | AVR XMEGA E5 | AVR XMEGA E5 |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 16 KB | 16 KB | 8 KB |
| EEPROM | 1 KB | 512 bytes | 512 bytes | 512 bytes |
| SRAM | 4 KB | 2 KB | 2 KB | 1 KB |
| Boot Code Section | 4 KB | 2 KB | 2 KB | 1 KB |
| Event System | 8 channels | 8 channels | 8 channels | 8 channels |
Penyeberangsung Jelas
- Twice the Flash memory of the 16 KB E5 alternatives (vsATXMEGA16E5-AN)
- Four times the Flash memory of the 8 KB E5 alternative (vsATXMEGA8E5-AU)
- Largest SRAM allocation among the documented E5 alternatives (vsATXMEGA8E5-AU)
- Double the EEPROM and boot capacity of the 16 KB family members (vsATXMEGA16E5-AUR)
Catatan Desain
Route the programming interface, reset network, clock components, and decoupling capacitors exactly as shown in the applicable Microchip Technology reference design and device pin table. The XMEGA E5 offers multiplexed peripherals, so selecting the correct alternate-function pins at schematic stage is essential. Place bulk and high-frequency bypass capacitors close to the device supply pins, route clocks away from switching nodes and communication edges, and preserve the package's exposed copper requirements where applicable.
Do not treat the lower-memory XMEGA E5 alternatives as unconditional software substitutes. ATXMEGA16E5 variants provide 16 KB rather than 32 KB of Flash, while ATXMEGA8E5-AU provides 8 KB; their SRAM, EEPROM, and boot sections are also smaller. Before replacing the ATXMEGA32E5-AU, rebuild the memory map, check vector placement, verify bootloader size, and confirm that no application component depends on the additional Flash, SRAM, or EEPROM capacity.
Design the supply rail for the entire 1.6 V to 3.3 V operating range rather than only the nominal system voltage. Include local bypass capacitance at the MCU supply pins and check the voltage drop across traces, connectors, and protection devices. If any peripheral operates at 5 V, use an appropriate level shifter rather than relying on 5 V-tolerant assumptions that are not established for the selected pins.
Plan event-driven signals and high-speed communication routes before assigning the remaining peripheral multiplexing. Keep clock and communication traces short, provide continuous return paths, and maintain separation from switching converters or motor-drive nodes. If the eight-channel event system connects directly to external signals, validate input thresholds, filtering, and timing in the datasheet rather than inferring compatibility from the 3.3 V supply level alone.
Maklumat Kesediaan
The manufacturer listing identifies the target as a green product, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 declaration was identified in the referenced product material.
