Broadcom

BCM56310A0KFEB - 24-Port Gigabit Ethernet Controller | Broadcom

MPN: BCM56310A0KFEB ✓ Aktif
1 Gb/s Speed
MOQ: 1 |

BCM56310A0KFEB Ringkasan

The Broadcom BCM56310A0KFEB is a 24-port Gigabit Ethernet interface controller designed for multi-lane network equipment. Its primary disclosed function is support for 24 Gigabit Ethernet ports through a multilane interface, placing it in the interface-controller hierarchy used for aggregation, switching, and uplink equipment. The device combines multiple high-speed Ethernet connections with a high-speed parallel host interface in a single integrated circuit.

Broadcom BCM56310 series devices are used where a system must consolidate multiple Gigabit Ethernet links rather than operate as a small two-port or eight-port network controller. A 24-port configuration can reduce the number of physical MAC/PHY interfaces needed in an access, aggregation, or line-card design. This simplifies board routing and connector management, although the host processor, external transceivers, clocking, power delivery, and thermal management remain significant system-level design considerations.

The part is identified as a 24-port Gigabit Ethernet multilane controller in distributor catalogs. Its exact electrical ratings, supported host interface type, clocking architecture, transceiver interfaces, operating voltage, package dimensions, thermal characteristics, and RoHS classification are not stated in the available product records. Engineers should therefore use the manufacturer datasheet and hardware design documentation for the specific BCM56310A0KFEB configuration before finalizing a PCB or system design.

This controller is most relevant to industrial gateways, telecom access equipment, Ethernet aggregation systems, server or storage network appliances, and network interface modules that need many Gigabit Ethernet links behind a single processor-facing bus. Compared with a collection of discrete eight-port controllers, a 24-port controller can reduce component count and simplify control-plane software integration. The tradeoff is that the fabric and host interface must sustain the aggregate traffic expected across all 24 ports while maintaining deterministic latency and loss-free behavior.

In a typical design, the BCM56310A0KFEB interfaces to external copper or optical PHYs, while the host processor provides firmware, configuration, traffic management, and management-plane services. Board designers should reserve high-speed routing capacity, use controlled-impedance layers, provide clean reference clocks, decouple every supply rail close to the device, and verify signal integrity with the exact PHY and backplane topology used in production.

The key selection question is not simply port count but end-to-end interface compatibility. Confirm package type, pin assignment, lane count, lane rates, reference-clock requirements, supported PHY types, firmware support, and thermal limits against the manufacturer documentation. This page combines catalog-level identification, sourcing guidance, drop-in alternative findings, and practical integration considerations for engineers evaluating the BCM56310A0KFEB.

Pilihan pengganti yang segera untuk BCM56310A0KFEB — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

BCM56310A0KFEBG

✅ Masuk Drop-In
📦 [DATA_NEEDED: package type]
Same BCM56310A0KFEB base family; marking suffix differs and the available listings do not quantify an electrical parameter difference

📋 Alternatif rujukan (tidak dalam katalog)

BCM56310A0KFEB Penilaian maksimum & Ciri-ciri Elektrik

Product Type 24-port Gigabit Ethernet multilane interface controller
Manufacturer Broadcom
Ethernet Port Count 24 ports
Supported Ethernet Speed per Port 1 Gb/s
Interface Category Interface controller

Panduan Konfigurasi Pin BCM56310A0KFEB standard

Konfigurasi pin untuk BCM56310A0KFEB (standard pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai standard untuk BCM56310A0KFEB

Tiada data garisan pin yang diperoleh untuk BCM56310A0KFEB.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

BCM56310A0KFEB patut untuk 6 aplikasis: 24-Port Gigabit Ethernet Access Equipment, Telecom Ethernet Aggregation Line Card, Industrial Multi-Port Ethernet Gateway, Server Network Interface Appliance, Managed Network Interface Module, Security and Surveillance Network Appliance.

🌐

24-Port Gigabit Ethernet Access Equipment

BCM56310A0KFEB fits access and aggregation equipment that must present 24 Gigabit Ethernet connections while keeping the host-side design consolidated. Its 24-port multilane controller role can replace several smaller network controllers, reducing board area and control-plane integration effort. The design must still allocate enough host-interface and SerDes bandwidth for the expected aggregate traffic, and it must follow the manufacturer lane map when assigning PHYs or optical modules. Differential-pair routing, reference-clock cleanliness, and per-rail decoupling are the principal implementation concerns because all 24 ports rely on the same controller and its supporting power network.

🖥️

Telecom Ethernet Aggregation Line Card

The BCM56310A0KFEB is applicable to a telecom aggregation line card that converts multiple Gigabit Ethernet service links into a higher-speed host-facing connection. Consolidating 24 ports into one controller can simplify enclosure wiring and make port-level traffic management easier for the host software. For line-card use, verify the supported PHY types, operating-temperature grade, clocking architecture, and packet-performance requirements in the manufacturer documentation. The aggregate lane rate must exceed the expected worst-case ingress and egress traffic with headroom for congestion and system overhead.

🏭

Industrial Multi-Port Ethernet Gateway

A BCM56310A0KFEB-based gateway can provide 24 Gigabit Ethernet ports for factory equipment, cameras, controllers, and edge-computing nodes behind a single system processor. The controller's port density reduces the number of physical network interfaces that a gateway must accommodate. Industrial qualification and environmental limits must be checked against the exact device variant before deployment. Designers should also evaluate how the external PHY ecosystem affects cost, isolation requirements, surge protection, and the thermal load generated by 24 simultaneous high-rate links.

🖥️

Server Network Interface Appliance

BCM56310A0KFEB can be used in a server or storage appliance that exposes a large bank of Gigabit Ethernet ports to external clients. Consolidating the links behind one controller allows the host processor to manage traffic through one primary device instead of numerous independent controllers. The host processor must provide sufficient bus bandwidth and firmware support for the configured lane map. Careful partitioning between channels and validation of the complete data path are essential when moving traffic among servers, storage arrays, and virtualization platforms.

🧩

Managed Network Interface Module

A managed network interface module can use BCM56310A0KFEB when it must support 24 Gigabit Ethernet ports in a limited enclosure. The controller provides a practical way to implement port statistics, traffic classification, link management, and host connectivity in one device. Its suitability depends on the module's supported media types, including any copper magnetics or optical modules connected to the controller. Keep the reference clock isolated from noisy sources and route each high-speed differential pair as a controlled-impedance structure with no unnecessary layer transitions.

🎥

Security and Surveillance Network Appliance

BCM56310A0KFEB is suitable for a security appliance or surveillance system that aggregates 24 Gigabit Ethernet camera or sensor links. A single high-density controller simplifies the relationship between the attached devices and the recording or analytics server. The design should verify the controller's supported PHY combinations and the host interface's ability to carry sustained multi-stream traffic. Power-supply sizing and thermal analysis must account for the combined controller, PHY, magnetics, and transceiver load rather than the controller alone.

What is the Broadcom BCM56310A0KFEB?
The Broadcom BCM56310A0KFEB is a 24-port Gigabit Ethernet multilane interface controller. Distributor records classify it as an interface-controller IC and identify support for 24 Gigabit Ethernet ports. It is intended for network equipment that consolidates many Gigabit Ethernet links behind a high-speed host-facing interface. Confirm the exact lane arrangement, PHY connectivity, and package details in the manufacturer documentation before committing the design.
What are the key specifications of BCM56310A0KFEB?
The key published specification for BCM56310A0KFEB is its role as a 24-port Gigabit Ethernet multilane controller. The part is supplied by Broadcom and is categorized under interface controllers. Its catalog identity does not state the operating voltage, SerDes lane rate, reference-clock requirement, thermal rating, or package dimensions, so those values must be taken from the manufacturer hardware documentation rather than inferred from the port count.
Is BCM56310A0KFEB suitable for a 24-port Ethernet aggregation design?
Yes, BCM56310A0KFEB is suited to 24-port Gigabit Ethernet aggregation designs because its defining feature is 24 Gigabit Ethernet ports in a multilane controller. Suitability also depends on the host-interface bandwidth, SerDes rates, supported PHY types, lane allocation, and firmware support. Use it when the complete system needs more consolidated ports than a conventional eight-port controller can provide.
Where can I find the BCM56310A0KFEB datasheet?
The manufacturer datasheet should be the controlling document for BCM56310A0KFEB. A datasheet reference is available through the GlobalSpec listing for this part, while Broadcom distributor pages provide product links and ordering information. Open the datasheet and confirm the package suffix, pinout, electrical limits, lane map, clock requirements, and PCB layout guidance for BCM56310A0KFEB.
Where can I find the BCM56310A0KFEB pinout?
The BCM56310A0KFEB pinout must be taken from the manufacturer pin-description table because the catalog records do not identify individual pins or the package pin count. Match the full BCM56310A0KFEB ordering suffix when reviewing the pinout so that power, ground, SerDes, host-interface, clock, and control assignments are not confused with a related BCM56310 variant.
What can replace BCM56310A0KFEB?
The closest documented same-family candidate is Broadcom BCM56310A0KFEBG, which appears as a related part in distributor cross-reference results. Treat it as a possible drop-in candidate only after verifying that its package, pinout, electrical limits, and firmware configuration match BCM56310A0KFEB. No other pin-compatible replacement is established by the available cross-reference records, so do not assume functional equivalence from a generic similar-parts list.
Is BCM56310A0KFEBG a drop-in replacement for BCM56310A0KFEB?
BCM56310A0KFEBG is a same-family Broadcom listing that may be a drop-in candidate, but compatibility must be confirmed before substitution. Check the manufacturer documentation for identical package outlines, exposed-pad connections, supply rails, SerDes assignments, clocking, reset behavior, and firmware support. Also verify lead-time requirements, because an electrically similar marking does not by itself prove production equivalence.
What is the best Broadcom equivalent for BCM56310A0KFEB?
Broadcom BCM56310A0KFEBG is the best-supported equivalent candidate in the available cross-reference information because it shares the BCM56310A0KFEB base designation and is indexed as a separate manufacturer part. A definitive answer requires a package-and-pin comparison against the Broadcom datasheet. If either the footprint or host-interface behavior differs, the part is not a true drop-in replacement.
How does BCM56310A0KFEB compare with a multi-chip 24-port design?
A BCM56310A0KFEB-based design consolidates 24 Gigabit Ethernet ports into one controller, potentially reducing controller count and simplifying software integration. A multi-chip design may provide more flexible port partitioning and easier thermal isolation, but it adds component count, synchronization requirements, and control-plane complexity. The better architecture depends on host bandwidth, PHY selection, latency targets, and thermal constraints.
When should I choose BCM56310A0KFEB instead of a smaller Ethernet controller?
Choose BCM56310A0KFEB when the enclosure must present 24 Gigabit Ethernet ports through one consolidated controller and the system can satisfy its aggregate host-interface and SerDes requirements. A smaller controller remains preferable for designs with fewer ports, lower power targets, simpler routing, or a host processor that lacks the required bus and firmware support.
Is BCM56310A0KFEB in stock?
Current stock status changes by supplier and order quantity, so request confirmation through the Request a Quote form on this page. One distributor record reported 320 units available in January 2026, but that snapshot is not a current inventory guarantee. Provide your required quantity, target date, and whether manufacturer-packaged or traceable material is needed when requesting the quote.
What is the price of BCM56310A0KFEB?
Pricing for BCM56310A0KFEB depends on quantity, sourcing channel, availability, and whether manufacturer-packaged material is required. Use the Request a Quote form on this page for a current quotation tied to your order quantity and target date. Engineers should budget for a specialist network-silicon supply chain and confirm lifecycle, traceability, and counterfeit-risk requirements before scheduling production.
What is the lead time for BCM56310A0KFEB?
The lead time for BCM56310A0KFEB should be confirmed with the supplier at the time of quotation because availability can change between production allocations and distributor restocks. Request the current lead time, minimum order quantity, and date-code requirements through the Request a Quote form on this page. Build schedule contingency around the confirmed date rather than historic catalog availability.
What design constraints matter when laying out BCM56310A0KFEB?
The layout must support the device's 24 Gigabit Ethernet connections and its multilane host interface at the exact rates allowed by the configuration. Use controlled-impedance routing for high-speed differential pairs, minimize stubs and vias, place decoupling capacitors adjacent to supply pins, and provide a clean, low-jitter reference clock. Obtain the manufacturer's reference design and length-matching rules before release.
Does BCM56310A0KFEB require external PHY devices?
The available BCM56310A0KFEB catalog information does not identify whether every port requires an external PHY, whether certain interfaces are integrated, or which PHYs are supported. Treat PHY connectivity as a configuration-specific item and confirm it in the manufacturer datasheet. The controller's multilane role makes this distinction essential when selecting magnetics, optical modules, line drivers, and board-level termination.
Can I use BCM56310A0KFEB in industrial or telecom equipment?
BCM56310A0KFEB can be considered for industrial and telecom equipment only after confirming its operating-temperature grade, regulatory requirements, power-supply design, and long-term supply status. The published catalog record confirms the 24-port Gigabit Ethernet controller function but does not state an industrial or telecom qualification. Use the manufacturer product documentation and the Request a Quote form to confirm availability and lifecycle commitments.

Data referensi kejuruteraan untuk BCM56310A0KFEB — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose BCM56310A0KFEB when a network appliance, access unit, or aggregation card must implement 24 Gigabit Ethernet ports in a compact design and the host processor supports its multilane architecture. It is especially attractive when consolidating three conventional eight-port controllers would add board area, synchronization complexity, and separate software integration points. Consider BCM56310A0KFEBG first when looking for a same-family substitute, but verify its package, pinout, clocking, electrical limits, and firmware compatibility before treating it as a drop-in replacement. Retain a smaller controller when the enclosure needs only a few ports, the power budget is tight, or the design cannot provide the aggregate host-interface bandwidth. Before ordering, obtain the manufacturer documentation for lane assignments, PHY support, operating-temperature grade, and lifecycle status, then request a quote with your required quantity and production schedule.

Perbandingan dengan Gantian

Parametr Produk Ini BCM56310A0KFEBG
Brand Broadcom Broadcom
Product Function 24-port Gigabit Ethernet multilane interface controller BCM56310A0KFEB family variant

Penyeberangsung Jelas

  • High-density 24-port Gigabit Ethernet integration (vsCommon eight-port Ethernet controllers)
  • Multilane host-facing architecture (vsIndependent discrete-port controllers)
  • Closest documented same-family substitute (vsBCM56310A0KFEBG)

Catatan Desain

Treat the multilane host interface and every SerDes connection as controlled-impedance channels. Use the manufacturer's reference stack-up and lane-routing rules, match differential pair lengths within the specified tolerance, avoid stubs, and minimize layer transitions on high-speed nets. The 24-port configuration can make simultaneous lane activity significant, so validate the complete topology with a channel simulation rather than estimating from a single pair.

Decouple each supply rail directly at the controller pins and follow the manufacturer capacitor values and placement rules. Estimated: if the controller consumes 8 W and the effective board-to-ambient thermal resistance is 25 C/W, the temperature rise would be about 200 C, so a practical 24-port design generally requires substantial copper, controlled airflow, or a thermal structure. Confirm actual device and system dissipation before sizing the power plane and heatsinking.

Keep the reference-clock route short, symmetric, and separated from switching power stages and high-current PHY outputs. Establish a solid ground reference beneath high-speed pairs, use short ground vias beside return-current transitions, and avoid routing clock and sensitive data beneath noisy magnetics or regulators. Confirm the pin assignment and exposed-pad connection in the manufacturer pin table before releasing the footprint.

A 24-port label does not guarantee that every configuration provides 24 simultaneous external PHY links. Verify the lane map, maximum SerDes rate, supported PHY media, firmware feature set, and host-bandwidth allocation. Also check the full ordering suffix when comparing BCM56310A0KFEB with BCM56310A0KFEBG; a similar family designation can conceal differences in temperature grade, packaging, or production configuration.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available catalog records identify Broadcom BCM56310A0KFEB as a 24-port Gigabit Ethernet multilane interface controller but do not state RoHS, REACH, halogen-free, lead-free, or conflict-minerals status. Confirm declarations using the manufacturer product documentation and the declaration associated with the exact ordering suffix.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

BCM56310A0KFEB datasheet BCM56310A0KFEB pinout BCM56310A0KFEB price BCM56310A0KFEB stock BCM56310A0KFEB replacement BCM56310A0KFEB equivalent BCM56310A0KFEB vs BCM56310A0KFEBG Broadcom BCM56310A0KFEB BCM56310A0KFEB 24 port Gigabit Ethernet BCM56310A0KFEB package footprint BCM56310A0KFEB interface controller BCM56310A0KFEB aggregation application BCM56310A0KFEB schematic reference design Where to buy BCM56310A0KFEB BCM56310A0KFEB lifecycle status

Komponen dan Tanda berkaitan

Broadcom BCM56310A0KFEB BCM56310A0KFEBG 24-port Gigabit Ethernet controller interface controller network interface controller Gigabit Ethernet multilane interface Ethernet aggregation network access equipment SerDes host interface reference clock external PHY copper PHY optical module network switch line card industrial gateway surface-mount integrated circuit RoHS REACH controlled-impedance routing differential pair
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ