Broadcom

BCM8302AIFBG - Dual 10 Gbps Interface Transceiver | Broadcom

MPN: BCM8302AIFBG ✓ Aktif
MOQ: 1 |

BCM8302AIFBG Ringkasan

Broadcom BCM8302AIFBG is a dual multirate interface transceiver for high-speed data links operating at up to 10 Gbps, with catalog information also identifying an 8.5 Gbps interface mode. The device belongs to the interface-driver and receiver family, where transmit and receive circuitry translates between digital logic and high-speed physical signaling. Broadcom markets the BCM8302AIFBG in an interface IC category for communications, storage, and industrial data-transfer systems.

A high-speed interface transceiver is an integrated circuit that combines driver and receiver functions into a physical-layer link. Its transmitter generates controlled output signals for a copper or optical link, while its receiver detects and restores data from the incoming waveform. Such devices are positioned beneath communication protocols and system-level data-processing blocks, helping bridge parallel or serial logic with physical data channels.

The principal identified feature of BCM8302AIFBG is its dual multirate architecture and support for data rates as high as 10 Gbps. A dual-channel implementation can reduce the component count where two independent high-speed links are required, although the two channels may not be intended to combine their data rates into a single 20 Gbps aggregate link. The catalog description identifies the device as supporting both 10 Gbps and 8.5 Gbps interface rates.

Broadcom BCM8302AIFBG is listed in the Interface ICs category as a driver, receiver, and transceiver device. The exact electrical architecture, supply rails, I/O standards, equalization modes, pin assignments, operating-temperature limits, and package dimensions are not stated in the product listings used for this page. Engineers should therefore use the Broadcom datasheet and its reference schematic before finalizing signal integrity, power, and thermal implementation.

Typical uses include high-speed backplanes, serial links between controllers and data-processing devices, network-interface equipment, storage infrastructure, and industrial communication systems. The 10 Gbps class of operation is useful where link bandwidth must exceed common 1 Gbps and 10 Gbps copper links while maintaining a compact implementation with integrated transmit and receive functions.

A key design consideration is that transceiver qualification depends on the complete channel: connector and PCB losses, launch and receive equalization, clocking, isolation, and the data protocol all affect usable margin. Do not infer a connector, trace impedance, supply voltage, or pinout from catalog labels alone. Validate the Broadcom reference design and preserve its recommended layer stack, component placement, and high-speed routing topology.

This page organizes the confirmed Broadcom product identity, dual multirate 10 Gbps positioning, interface-IC classification, sourcing path, and engineering selection questions. It also distinguishes documented capabilities from parameters that require confirmation from the manufacturer datasheet, helping designers plan a safe evaluation and prototype sequence.

Pilihan pengganti yang segera untuk BCM8302AIFBG — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

BCM8302AIFBG Penilaian maksimum & Ciri-ciri Elektrik

Manufacturer Broadcom Limited
Device Type Dual multirate interface driver, receiver, and transceiver
Maximum Stated Data Rate 10 Gbps
Additional Catalog Data Rate 8.5 Gbps
Number of Interface Channels 2 channels
Signal Functions Driver and receiver functions
Product Category Interface ICs
Catalog Classification Drivers, receivers, and transceivers

Panduan Konfigurasi Pin BCM8302AIFBG standard

Konfigurasi pin untuk BCM8302AIFBG (standard pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai standard untuk BCM8302AIFBG

Tiada data garisan pin yang diperoleh untuk BCM8302AIFBG.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

BCM8302AIFBG patut untuk 6 aplikasis: 10 Gbps Point-to-Point Data Links, High-Speed Backplane Interfaces, Network Interface Equipment, Storage Controller Connections, Industrial Control Data Paths, Board-to-Board Processor Links.

🌐

10 Gbps Point-to-Point Data Links

BCM8302AIFBG is a candidate for point-to-point links requiring data rates up to 10 Gbps because Broadcom identifies it as a dual multirate transceiver with integrated driver and receiver functions. Place the device according to the manufacturer reference circuit and connect it to the protocol controller or serializer appropriate to the supported physical layer. The key design consideration is channel margin: PCB loss, connector behavior, return loss, jitter, and equalization must be validated together rather than treating the 10 Gbps catalog rating as a guaranteed end-to-end reach.

🖥️

High-Speed Backplane Interfaces

The BCM8302AIFBG can be evaluated for high-speed backplane links operating in the 10 Gbps class, where transmit and receive functions are needed close to the connector or routing region. Its dual multirate architecture may allow two related point-to-point channels to be implemented with one component, depending on the supported channel modes in the datasheet. Preserve the reference layer stack and controlled-impedance topology, and verify insertion loss, crosstalk, skew, jitter, and BER across the populated backplane configuration.

📡

Network Interface Equipment

BCM8302AIFBG is suitable for preliminary evaluation in network-interface and switching equipment that requires high-speed serial physical-layer links. The 10 Gbps operating capability aligns with high-throughput equipment links, while the 8.5 Gbps catalog capability may support a related multirate operating mode. Determine the exact supported rates, encoding, equalization, clocking scheme, and power rails from the Broadcom datasheet before selecting the surrounding PHY, connector, magnetics, clock, or controller components.

💾

Storage Controller Connections

BCM8302AIFBG may be considered for high-speed storage-controller connections when the channel architecture is compatible with its transmit and receive functions. A 10 Gbps-class link can reduce serialization overhead compared with slower parallel interconnects, but the complete system still requires agreement on protocol timing, lane width, reference clock, error handling, and power management. Validate the transceiver against the controller reference design and include realistic connector and PCB losses in the channel simulation before production release.

🏭

Industrial Control Data Paths

BCM8302AIFBG can be assessed for industrial control and instrumentation systems needing a compact, high-speed communication path. Its dual multirate interface may assist designers building concurrent data and status channels, subject to the channel modes and thermal requirements in the datasheet. Industrial deployment also requires review of operating-temperature limits, power-supply tolerance, isolation strategy, grounding, and system availability. Use the manufacturer qualification information rather than assuming industrial suitability from the interface description.

🔧

Board-to-Board Processor Links

BCM8302AIFBG is a candidate for board-to-board links between a processor or controller and an accelerator in systems operating at up to 10 Gbps. Integrating transmitter and receiver functions may simplify routing compared with discrete driver and receiver arrangements, provided the supported electrical layer and protocol match. Keep the device close to the connector or compliant escape region, preserve reference-controlled return paths, and assess connector and PCB loss before estimating achievable distance or BER.

What is the BCM8302AIFBG?
The Broadcom BCM8302AIFBG is a dual multirate high-speed interface transceiver that combines driver and receiver functions for communications links operating at up to 10 Gbps. Broadcom also lists an 8.5 Gbps interface capability in its catalog description. The device is categorized as an Interface IC and is intended for electronic designs requiring high-speed transmit and receive circuitry. Use the manufacturer datasheet for pin assignments, electrical limits, and supported link configurations.
What are the key specifications of BCM8302AIFBG that engineers should know?
The principal BCM8302AIFBG specifications are its dual multirate architecture, integrated driver and receiver functions, operation up to 10 Gbps, and catalog identification of an 8.5 Gbps interface mode. Broadcom classifies the component as an interface driver, receiver, and transceiver. Supply voltage, I/O standard, package dimensions, pin count, equalization, and temperature limits are not stated in the product listings and must be confirmed from the Broadcom datasheet before schematic or PCB design.
Where can I download the BCM8302AIFBG datasheet PDF?
The BCM8302AIFBG datasheet PDF can be reached through the linked Avago Technologies and Broadcom Limited document page, which identifies BCM8302AIFBG as a dual multirate 10 Gbps interface device. Review the document identifier and revision before releasing a design because distributor-hosted copies can be outdated. The manufacturer document should be the controlling source for pinout, recommended application circuit, absolute maximum ratings, and electrical characteristics.
Where can I find the BCM8302AIFBG pinout?
The BCM8302AIFBG pinout must be taken from the pin-description table in the Broadcom manufacturer datasheet; the catalog listing does not expose individual lead numbers or signal names. Do not infer the footprint from the IF package suffix or from the 10 Gbps description. After obtaining the datasheet, verify every supply, ground, transmit, receive, configuration, reference-clock, and test connection against the exact BCM8302AIFBG ordering code before laying out the PCB.
Is BCM8302AIFBG suitable for a 10 Gbps communications link?
Yes, BCM8302AIFBG is identified as a dual multirate interface transceiver supporting operation up to 10 Gbps, making it a candidate for 10 Gbps-class point-to-point links. Suitability still depends on the physical layer, connector, trace geometry, clocking, equalization, and protocol implemented around the device. Prototype the complete channel rather than evaluating only the transceiver, and verify all AC and DC timing limits in the manufacturer datasheet.
What is the difference between BCM8302AIFBG and an 8.5 Gbps interface device?
The confirmed difference is operating-rate coverage: Broadcom describes BCM8302AIFBG as a dual multirate 10 Gbps device and also lists an 8.5 Gbps interface capability. The product listings do not identify another BCM8302-series device for a direct parameter comparison. Determine whether 8.5 Gbps is a fixed supported mode, an alternate operating point, or part of a multirate range by reviewing the manufacturer datasheet and its supported data-rate table.
When should I choose BCM8302AIFBG over another multirate transceiver?
Choose BCM8302AIFBG when the design needs a Broadcom dual multirate transceiver with integrated transmit and receive functions and a confirmed operating rate up to 10 Gbps. It is particularly relevant when two separate high-speed links can share one package. Select another device when its documented protocol, supply voltage, I/O standard, reach, equalization, automotive qualification, or channel performance better matches the system. Compatibility must be based on the complete electrical specification rather than the headline speed alone.
Is BCM8302AIFBG suitable for backplane and board-to-board links?
BCM8302AIFBG can be considered for a high-speed board-to-board or backplane interface because its catalog description identifies a dual multirate transceiver rated up to 10 Gbps. Actual reach depends on connector loss, dielectric material, trace length, insertion loss, impedance control, and the transmit and receive configurations supported by the device. Start with the Broadcom reference layout, preserve its high-speed topology, and validate eye opening, jitter, and BER across voltage and temperature corners.
What is the best drop-in replacement for BCM8302AIFBG?
No verified drop-in replacement for BCM8302AIFBG is established by the cross-reference information. A valid replacement would require the same package, pin-to-pin assignments, compatible supply rails, equivalent data-rate support, and matching transmit and receive electrical characteristics. Do not substitute a device merely because its catalog heading also states 10 Gbps. Request manufacturer cross-reference guidance and compare the complete BCM8302AIFBG datasheet before approving a replacement.
What can replace BCM8302AIFBG?
Only a part with a verified BCM8302AIFBG-compatible footprint and electrical interface should replace BCM8302AIFBG. No same-brand or cross-brand candidate in the cross-reference results is identified as pin-to-pin compatible with this exact ordering code. Engineers should treat any alternative as unapproved until its package drawing, pin table, supply requirements, I/O standard, data-rate table, and reference circuit are compared directly with the Broadcom datasheet.
What is the best Broadcom equivalent for BCM8302AIFBG?
No distinct Broadcom equivalent is documented for BCM8302AIFBG in the available cross-reference results. The confirmed device remains the Broadcom BCM8302AIFBG, described as a dual multirate 10 Gbps interface transceiver. If sourcing continuity is critical, ask Broadcom for an approved alternate or lifecycle recommendation using the exact MPN and board requirements. A related Broadcom family member is not automatically a drop-in substitute.
Where can I buy BCM8302AIFBG online?
BCM8302AIFBG can be requested through the Request a Quote form on this page. The product is listed by Broadcom and appears in multiple distributor catalogs, but current inventory, minimum order quantity, and shipment timing should be confirmed through a quote request. Provide the exact MPN BCM8302AIFBG, target quantity, delivery location, and required date so the sourcing team can return the appropriate commercial response.
What is the price of BCM8302AIFBG?
The current commercial price for BCM8302AIFBG is handled through the Request a Quote form on this page. The product listings reviewed do not provide qualifying quantity-break prices for the exact ordering code, so no price figure is stated here. Submit the required quantity and project information with the quote request to obtain a current offer and delivery schedule.
What is the lead time for BCM8302AIFBG?
The current lead time for BCM8302AIFBG should be confirmed through the Request a Quote form on this page. The distributor listings identify the component but do not establish a guaranteed factory lead time, available stock, or approved allocation. Include your required quantity, production schedule, and approved destination in the request so the sourcing team can provide a time-bound quotation rather than a generic availability statement.
Is BCM8302AIFBG in stock?
Current BCM8302AIFBG stock status should be confirmed through the Request a Quote form on this page. The product is listed in several distributor catalogs, but catalog presence alone does not establish local inventory, factory allocation, or shipment readiness. Provide the exact MPN, quantity, approved package and marking requirements, delivery country, and required date to obtain a current stock and delivery response.
What design checks are required for a BCM8302AIFBG 10 Gbps link?
A BCM8302AIFBG 10 Gbps design must verify pin assignments, supply sequencing, reference-clock requirements, I/O standards, impedance, return loss, insertion loss, jitter, equalization, and channel margin in the manufacturer datasheet. High-speed traces should follow the Broadcom reference layout, minimize discontinuities, use appropriate layer transitions, and maintain controlled impedance. Validate the completed board across the required data rate, BER, voltage, and temperature conditions.

Data referensi kejuruteraan untuk BCM8302AIFBG — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose BCM8302AIFBG for a high-speed interface design that specifically needs a Broadcom dual multirate transceiver with operation identified up to 10 Gbps. It is most attractive when two related transmit and receive functions can share the package and when the supported electrical layer, clocking method, equalization, and power rails align with the target protocol. No verified pin-compatible replacement is identified, so the decision should begin with the exact Broadcom ordering code rather than a generic 10 Gbps transceiver. Review the manufacturer datasheet to confirm package dimensions, pinout, channel configuration, temperature range, and reference implementation. If those requirements do not match, evaluate another device based on protocol compatibility, reach, power, qualification, and verified availability. A headline data-rate match alone is insufficient because transmitter architecture, receiver equalization, lane organization, and clocking can make otherwise similar parts electrically incompatible.

Perbandingan dengan Gantian

Parametr Produk Ini
Brand Broadcom
Maximum Stated Data Rate 10 Gbps
Additional Catalog Data Rate 8.5 Gbps
Interface Channels 2 channels
Driver Functions Integrated driver function
Receiver Functions Integrated receiver function
Product Category Interface ICs

Catatan Desain

Use the Broadcom BCM8302AIFBG reference layout as the starting point for the high-speed channel. Preserve controlled-impedance routing, minimize impedance discontinuities, provide a continuous return path, and avoid unnecessary stubs. Place the transceiver and decoupling network close to the transmitter and receiver connection points. Do not add branch routes or test-point geometry without checking their effect on return loss, insertion loss, crosstalk, jitter, and the resulting eye margin.

Evaluate the complete channel from the BCM8302AIFBG output through PCB traces, connectors, and the receiving endpoint. Model frequency-dependent insertion loss, return loss, skew, crosstalk, and jitter at the intended data rate, including worst-case PVT conditions. Confirm the supported equalization or preset configuration in the manufacturer datasheet. A 10 Gbps catalog rating describes device capability but does not by itself guarantee a specified distance, connector count, or BER for every physical channel.

Before schematic capture, obtain the BCM8302AIFBG supply-voltage, current, sequencing, reference-clock, and decoupling requirements from the Broadcom datasheet. Implement local high-frequency bypass connections with the specified capacitance and placement, and provide clean return paths for every supply connection. Confirm startup behavior and voltage tolerances against the system power architecture; do not infer rail values from the interface category or the Broadcom product family name.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No definitive environmental or automotive qualification statements are present in the product listings. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status against the manufacturer datasheet or product documentation for the exact ordering code.

Data disahkan pada: 2026-11-10 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

BCM8302AIFBG datasheet BCM8302AIFBG specifications BCM8302AIFBG pinout BCM8302AIFBG datasheet pdf Broadcom BCM8302AIFBG BCM8302AIFBG 10 Gbps BCM8302AIFBG 8.5 Gbps BCM8302AIFBG equivalent BCM8302AIFBG replacement BCM8302AIFBG cross reference BCM8302AIFBG price BCM8302AIFBG stock BCM8302AIFBG application circuit BCM8302AIFBG interface transceiver

Komponen dan Tanda berkaitan

Broadcom Broadcom Limited BCM8302AIFBG Avago Technologies interface transceiver high-speed transceiver interface driver interface receiver serdes 10 Gbps 8.5 Gbps dual multirate Interface ICs integrated circuit semiconductor point-to-point link backplane board-to-board communication network interface storage controller industrial communication signal integrity equalization reference clock
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ