BCM8302AIFBG - Dual 10 Gbps Interface Transceiver | Broadcom
MPN: BCM8302AIFBG ✓ Hoạt độngBCM8302AIFBG Tóm tắt
A high-speed interface transceiver is an integrated circuit that combines driver and receiver functions into a physical-layer link. Its transmitter generates controlled output signals for a copper or optical link, while its receiver detects and restores data from the incoming waveform. Such devices are positioned beneath communication protocols and system-level data-processing blocks, helping bridge parallel or serial logic with physical data channels.
The principal identified feature of BCM8302AIFBG is its dual multirate architecture and support for data rates as high as 10 Gbps. A dual-channel implementation can reduce the component count where two independent high-speed links are required, although the two channels may not be intended to combine their data rates into a single 20 Gbps aggregate link. The catalog description identifies the device as supporting both 10 Gbps and 8.5 Gbps interface rates.
Broadcom BCM8302AIFBG is listed in the Interface ICs category as a driver, receiver, and transceiver device. The exact electrical architecture, supply rails, I/O standards, equalization modes, pin assignments, operating-temperature limits, and package dimensions are not stated in the product listings used for this page. Engineers should therefore use the Broadcom datasheet and its reference schematic before finalizing signal integrity, power, and thermal implementation.
Typical uses include high-speed backplanes, serial links between controllers and data-processing devices, network-interface equipment, storage infrastructure, and industrial communication systems. The 10 Gbps class of operation is useful where link bandwidth must exceed common 1 Gbps and 10 Gbps copper links while maintaining a compact implementation with integrated transmit and receive functions.
A key design consideration is that transceiver qualification depends on the complete channel: connector and PCB losses, launch and receive equalization, clocking, isolation, and the data protocol all affect usable margin. Do not infer a connector, trace impedance, supply voltage, or pinout from catalog labels alone. Validate the Broadcom reference design and preserve its recommended layer stack, component placement, and high-speed routing topology.
This page organizes the confirmed Broadcom product identity, dual multirate 10 Gbps positioning, interface-IC classification, sourcing path, and engineering selection questions. It also distinguishes documented capabilities from parameters that require confirmation from the manufacturer datasheet, helping designers plan a safe evaluation and prototype sequence.
Bộ thay thế dễ dàng lắp đặt cho BCM8302AIFBG — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Không có bộ thay thế dễ dàng lắp đặt sẵn có cho sản phẩm này.
Yêu cầu các bộ thay thếBCM8302AIFBG Tỷ lệ tối đa & tính chất điện
| Manufacturer | Broadcom Limited |
| Device Type | Dual multirate interface driver, receiver, and transceiver |
| Maximum Stated Data Rate | 10 Gbps |
| Additional Catalog Data Rate | 8.5 Gbps |
| Number of Interface Channels | 2 channels |
| Signal Functions | Driver and receiver functions |
| Product Category | Interface ICs |
| Catalog Classification | Drivers, receivers, and transceivers |
Hướng dẫn cấu hình chân BCM8302AIFBG standard
Cấu hình chân cho BCM8302AIFBG (standard gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho BCM8302AIFBG.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
BCM8302AIFBG phù hợp cho 6 Áp dụngs: 10 Gbps Point-to-Point Data Links, High-Speed Backplane Interfaces, Network Interface Equipment, Storage Controller Connections, Industrial Control Data Paths, Board-to-Board Processor Links.
10 Gbps Point-to-Point Data Links
BCM8302AIFBG is a candidate for point-to-point links requiring data rates up to 10 Gbps because Broadcom identifies it as a dual multirate transceiver with integrated driver and receiver functions. Place the device according to the manufacturer reference circuit and connect it to the protocol controller or serializer appropriate to the supported physical layer. The key design consideration is channel margin: PCB loss, connector behavior, return loss, jitter, and equalization must be validated together rather than treating the 10 Gbps catalog rating as a guaranteed end-to-end reach.
High-Speed Backplane Interfaces
The BCM8302AIFBG can be evaluated for high-speed backplane links operating in the 10 Gbps class, where transmit and receive functions are needed close to the connector or routing region. Its dual multirate architecture may allow two related point-to-point channels to be implemented with one component, depending on the supported channel modes in the datasheet. Preserve the reference layer stack and controlled-impedance topology, and verify insertion loss, crosstalk, skew, jitter, and BER across the populated backplane configuration.
Network Interface Equipment
BCM8302AIFBG is suitable for preliminary evaluation in network-interface and switching equipment that requires high-speed serial physical-layer links. The 10 Gbps operating capability aligns with high-throughput equipment links, while the 8.5 Gbps catalog capability may support a related multirate operating mode. Determine the exact supported rates, encoding, equalization, clocking scheme, and power rails from the Broadcom datasheet before selecting the surrounding PHY, connector, magnetics, clock, or controller components.
Storage Controller Connections
BCM8302AIFBG may be considered for high-speed storage-controller connections when the channel architecture is compatible with its transmit and receive functions. A 10 Gbps-class link can reduce serialization overhead compared with slower parallel interconnects, but the complete system still requires agreement on protocol timing, lane width, reference clock, error handling, and power management. Validate the transceiver against the controller reference design and include realistic connector and PCB losses in the channel simulation before production release.
Industrial Control Data Paths
BCM8302AIFBG can be assessed for industrial control and instrumentation systems needing a compact, high-speed communication path. Its dual multirate interface may assist designers building concurrent data and status channels, subject to the channel modes and thermal requirements in the datasheet. Industrial deployment also requires review of operating-temperature limits, power-supply tolerance, isolation strategy, grounding, and system availability. Use the manufacturer qualification information rather than assuming industrial suitability from the interface description.
Board-to-Board Processor Links
BCM8302AIFBG is a candidate for board-to-board links between a processor or controller and an accelerator in systems operating at up to 10 Gbps. Integrating transmitter and receiver functions may simplify routing compared with discrete driver and receiver arrangements, provided the supported electrical layer and protocol match. Keep the device close to the connector or compliant escape region, preserve reference-controlled return paths, and assess connector and PCB loss before estimating achievable distance or BER.
Dữ liệu tham khảo kỹ thuật cho BCM8302AIFBG — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| Brand | Broadcom |
| Maximum Stated Data Rate | 10 Gbps |
| Additional Catalog Data Rate | 8.5 Gbps |
| Interface Channels | 2 channels |
| Driver Functions | Integrated driver function |
| Receiver Functions | Integrated receiver function |
| Product Category | Interface ICs |
Ghi chú thiết kế
Use the Broadcom BCM8302AIFBG reference layout as the starting point for the high-speed channel. Preserve controlled-impedance routing, minimize impedance discontinuities, provide a continuous return path, and avoid unnecessary stubs. Place the transceiver and decoupling network close to the transmitter and receiver connection points. Do not add branch routes or test-point geometry without checking their effect on return loss, insertion loss, crosstalk, jitter, and the resulting eye margin.
Evaluate the complete channel from the BCM8302AIFBG output through PCB traces, connectors, and the receiving endpoint. Model frequency-dependent insertion loss, return loss, skew, crosstalk, and jitter at the intended data rate, including worst-case PVT conditions. Confirm the supported equalization or preset configuration in the manufacturer datasheet. A 10 Gbps catalog rating describes device capability but does not by itself guarantee a specified distance, connector count, or BER for every physical channel.
Before schematic capture, obtain the BCM8302AIFBG supply-voltage, current, sequencing, reference-clock, and decoupling requirements from the Broadcom datasheet. Implement local high-frequency bypass connections with the specified capacitance and placement, and provide clean return paths for every supply connection. Confirm startup behavior and voltage tolerances against the system power architecture; do not infer rail values from the interface category or the Broadcom product family name.
Thông tin tuân thủ
No definitive environmental or automotive qualification statements are present in the product listings. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and AEC-Q100 status against the manufacturer datasheet or product documentation for the exact ordering code.