Silicon Labs

C8051F060-GQ - 25MHz 8051 MCU with Dual ADCs | SiLabs

MPN: C8051F060-GQ ✓ Aktif
2.7 V to 3.6 V Vdss 100-pin TQFP, 14 mm x 14 mm Package 25 MHz Speed 64 KB Memory
MOQ: 1 |

C8051F060-GQ Ringkasan

The Silicon Labs C8051F060-GQ is an 8-bit C8051F06x mixed-signal microcontroller with a 25 MHz CIP-51 core, 64 KB of flash memory, 4,352 bytes of RAM, 59 digital I/O pins, and two 16-bit 1 Msps ADCs in a 100-pin TQFP package. It combines deterministic 8051-compatible processing with substantial analog measurement capability and CAN connectivity.

A microcontroller is a programmable semiconductor that integrates a CPU core, memory, and peripherals on one device. The C8051F060 belongs to the 8051 family of 8-bit microcontrollers and extends the conventional architecture with the Silicon Labs CIP-51 core. Its mixed-signal system-on-chip position places analog-to-digital conversion, general-purpose I/O, communications, and embedded control functions within a single package.

The headline features of this device include a 25 MHz operating frequency, 64 KB of in-system programmable flash, and 59 general-purpose digital I/O pins. Two separate 16-bit successive-approximation ADCs operate at up to 1 Msps, allowing the MCU to sample multiple analog channels for industrial controls, instrumentation, and embedded measurement systems. The operating-temperature range is -40°C to +85°C, while the 3.3 V supply class supports integration with common industrial and embedded electronics.

The C8051F060-GQ is part of the C8051F06x family, whose devices include four enhanced 8-bit ports and a 3-bit port for a total of 59 general-purpose I/O pins. Its integrated CAN controller supports industrial networking, while the dual ADC architecture reduces the need for external converters when several analog quantities must be measured. The 100-pin TQFP package provides enough pins for mixed analog, digital, and communications routing, although its relatively large footprint demands careful PCB planning.

Typical applications include sensor instrumentation, industrial data acquisition, CAN-connected machine controls, motor and actuator supervision, laboratory measurement equipment, and CAN-based industrial gateways. The combination of two fast ADCs and 59 I/O pins is particularly useful when a controller must capture analog inputs, operate digital sensors, and communicate over a robust industrial bus without relying on several discrete components.

For PCB implementation, reserve the manufacturer-recommended decoupling and analog-layout geometry around the power and ADC pins. Keep analog signal paths short, separate sensitive analog inputs from high-current switching nodes, and provide adequate exposed-board copper beneath the TQFP footprint for heat dissipation. Firmware and peripheral configuration should be validated against the Silicon Labs C8051F06x data sheet before production release.

Pilihan pengganti yang segera untuk C8051F060-GQ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera C8051F060-GQ (sama faktor bentuk dan kaki) — berbeza dalam Package, ADC Resolution, Flash Memory, Microcontroller Type, Processor Core.

Silicon Labs
ADC Resolution: 12 bit
Processor Core: 8051
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 100-pin TQFP, 14 x 14 mm
Flash Memory: 64 KB (64K x 8)
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 100-pin TQFP, 14 x 14 mm
Flash Memory: 64 KB (64K x 8)
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 64-TQFP (10mm x 10mm)
ADC Resolution: 16-bit SAR
Flash Memory: 64KB (64K x 8)
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 100-pin TQFP (14 mm x 14 mm)
ADC Resolution: 16 bit
Microcontroller Type: 8-bit mixed-signal microcontroller
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 100-pin TQFP (14 mm x 14 mm)
ADC Resolution: 16 bit
Microcontroller Type: 8-bit mixed-signal microcontroller
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 100-pin TQFP (14 mm x 14 mm)
ADC Resolution: 16 bit
Flash Memory: 64 KB (64K x 8)
Bandingkan Dengan C8051F060-GQ →
Silicon Labs
Package: 100-pin TQFP (14 mm x 14 mm)
ADC Resolution: 16 bit
Flash Memory: 64 KB (64K x 8)
Bandingkan Dengan C8051F060-GQ →

C8051F062-GQ

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-TQFP (14x14)
Same 25 MHz core, 64 KB flash class, dual 16-bit ADC configuration, and 59 I/O class; device-specific peripheral configuration differs by 0 stated core ratings

📋 Alternatif rujukan (tidak dalam katalog)

C8051F064-GQ

✅ Masuk Drop-In
📦 100-TQFP (14x14)
Same 25 MHz core, 64 KB flash, 16-bit ADC class, and 59 I/O count; device-specific peripheral configuration differs by 0 stated core ratings

📋 Alternatif rujukan (tidak dalam katalog)

C8051F066-GQ

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 100-TQFP (14x14)
Same 25 MHz core, 64 KB flash class, dual 16-bit ADC configuration, and 59 I/O class; device-specific peripheral configuration differs by 0 stated core ratings

📋 Alternatif rujukan (tidak dalam katalog)

C8051F060-GQ Penilaian maksimum & Ciri-ciri Elektrik

Product Type 8-bit mixed-signal microcontroller
Core 8051-compatible CIP-51 core
Maximum CPU Frequency 25 MHz
Flash Memory 64 KB
Program Memory Organization 64K x 8 bits
RAM 4,352 bytes (4,096 + 256 bytes)
General-Purpose Digital I/O 59 pins
ADC Quantity 2
ADC Resolution 16 bits
ADC Sampling Rate Up to 1 Msps per ADC
ADC Type Successive-approximation ADC
Communications CAN
Gambaran Suhu Operasi -40°C to +85°C
Supply Voltage Class 2.7 V to 3.6 V
Kemasan 100-pin TQFP, 14 mm x 14 mm
Jenis Pemasangan Surface mount
In-System Programming Supported
Program Memory Type Flash

Panduan Konfigurasi Pin C8051F060-GQ 100-pin tqfp, 14 mm x 14 mm

Konfigurasi pin untuk C8051F060-GQ (100-pin tqfp, 14 mm x 14 mm pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 100-pin tqfp, 14 mm x 14 mm untuk C8051F060-GQ

Tiada data garisan pin yang diperoleh untuk C8051F060-GQ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

C8051F060-GQ patut untuk 6 aplikasis: Industrial Sensor Acquisition, CAN-Connected Machine Control, Precision Test and Measurement, CAN-Based Industrial Gateway, Motor and Actuator Supervision, Embedded Environmental Monitoring.

🏭

Industrial Sensor Acquisition

The C8051F060-GQ fits multi-channel industrial sensor acquisition because it combines two 16-bit ADCs operating at up to 1 Msps with 59 digital I/O pins. Separate converters can sample related analog inputs without relying on a multiplexed external converter, while the digital ports handle sensors, threshold inputs, and control outputs. Its 25 MHz CIP-51 core provides useful processing bandwidth for calibration, filtering, and converting measurements into protocol data. The -40°C to +85°C range supports industrial equipment when analog traces are properly shielded and the PCB follows the manufacturer grounding and decoupling layout.

🏭

CAN-Connected Machine Control

The C8051F060-GQ is suitable for CAN-connected machine controllers that must execute a control function and exchange diagnostic or process data. Its CAN interface supports network communication, while 59 I/O pins provide substantial capacity for inputs, outputs, interlocks, and actuator drivers. The 25 MHz core allows the firmware to scan I/O, apply control rules, and service communication events without moving basic control into a separate host processor. System designers should define termination, isolation, and grounding for the CAN physical layer while keeping the MCU supply and analog sections away from high-current switching nodes.

⚡

Precision Test and Measurement

The dual 16-bit, 1 Msps ADCs make the C8051F060-GQ useful in compact test and measurement instruments that acquire analog quantities and perform local calculations. Its 64 KB flash provides room for calibration tables, conversion routines, and instrument control logic, while 4,352 bytes of RAM supports acquisition buffers and working variables. The 59-pin digital interface can support range selection, front-panel control, relay logic, and status reporting. For laboratory accuracy, use guarded analog routing, clean references, appropriate input conditioning, and calibration procedures that account for the selected ADC and gain configuration.

🌐

CAN-Based Industrial Gateway

The C8051F060-GQ can serve as the local controller in a CAN-based industrial gateway that reads sensors, manages discrete I/O, and forwards converted data. Its mixed-signal architecture reduces the number of external components required when the gateway also monitors analog equipment. The 25 MHz core is suitable for protocol formatting and supervisory logic, while CAN connectivity supports communication with controllers on the same network. For a reliable gateway, isolate external field wiring where required, use robust power regulation, validate CAN bus timing, and program brownout and watchdog behavior for unattended operation.

🔧

Motor and Actuator Supervision

The C8051F060-GQ fits supervisory controllers for motors and actuators that require both digital command signals and analog feedback. Its 59 I/O pins can accept limit switches, position indicators, interlocks, and fault signals, while the dual 16-bit ADCs can monitor current, temperature, or position-sensor analog outputs. The 25 MHz core supports rapid state-machine updates and protection handling around the 1 Msps conversion capability. Direct power-stage routing remains critical: use suitable gate drivers and protection components, separate switching returns from analog references, and keep the MCU ground strategy consistent with the power converter.

🧩

Embedded Environmental Monitoring

The C8051F060-GQ is appropriate for an embedded environmental-monitoring station that samples multiple analog channels and manages digital probes. Two independent 16-bit ADCs can capture sensor outputs at up to 1 Msps, enabling time-aligned measurements or simultaneous sampling strategies. The 59 I/O pins support rain, temperature, door, power, and alarm inputs, while CAN or serial interfaces can link the station to a larger control network. For reliable field operation, protect external sensor inputs from surges, use filtered supplies, calibrate channels in software, and include watchdog and communications-failure recovery in the firmware design.

What are the key specifications of C8051F060-GQ that engineers should know?
The C8051F060-GQ is a 25 MHz, 8-bit mixed-signal microcontroller with 64 KB of flash, 4,352 bytes of RAM, 59 digital I/O pins, and two 16-bit 1 Msps ADCs. It also includes CAN connectivity and comes in a 100-pin TQFP package. According to the Silicon Labs C8051F06x data sheet, these resources allow the device to combine real-time control, analog measurement, and industrial communication in one component.
Where can I download the C8051F060-GQ datasheet PDF?
The official C8051F06x data sheet is available directly from Silicon Labs at the manufacturer PDF link on this page. It documents the CIP-51 core, flash and RAM organization, ADC architecture, digital ports, CAN interface, electrical characteristics, and package information. Use the manufacturer document for final pin assignment, timing, and electrical-limit decisions rather than a secondary schematic or distributor summary.
What is the operating frequency of C8051F060-GQ?
The C8051F060-GQ operates at up to 25 MHz using its 8051-compatible CIP-51 core. The manufacturer describes it as a high-speed mixed-signal MCU, with the increased clock rate supporting faster control loops and more efficient execution than a conventional 8-bit architecture. Silicon Labs identifies 25 MHz as the maximum CPU frequency for this device.
How much memory does C8051F060-GQ have?
The C8051F060-GQ contains 64 KB of flash program memory and 4,352 bytes of RAM, organized as 4,096 + 256 bytes. The 64K x 8 flash supports in-system programming, while the RAM supports working data, stack operations, and peripheral buffers. These figures are identified in the Silicon Labs C8051F06x family documentation.
What ADC capabilities are built into C8051F060-GQ?
The C8051F060-GQ integrates two separate 16-bit successive-approximation ADCs, each capable of operation up to 1 Msps. These converters support direct analog measurement within the MCU rather than requiring an external ADC for every channel. Silicon Labs specifies the dual-ADC arrangement and 1 Msps maximum conversion rate for the C8051F060/2/4/6 devices.
Does C8051F060-GQ support CAN communication?
Yes, the C8051F060-GQ includes CAN capability for connected industrial and embedded systems. CAN is useful for sensor networks, machine controls, diagnostic interfaces, and gateways where robust messaging and predictable network behavior are important. The product listing identifies the device as an 8051 MCU with CAN, and the manufacturer data sheet defines the controller and electrical characteristics.
How many digital I/O pins does C8051F060-GQ provide?
The C8051F060-GQ provides 59 general-purpose digital I/O pins. Silicon Labs describes four enhanced 8-bit ports and one 3-bit port, combining to produce the 59-pin total. This high I/O count supports multiple digital inputs, outputs, and mixed signal assignments while keeping the main control and measurement functions inside a single MCU.
What package and mounting type does C8051F060-GQ use?
The C8051F060-GQ uses a surface-mount 100-pin TQFP package measuring 14 mm by 14 mm. The TQFP footprint provides the numerous pins needed for 59 digital I/O functions, dual analog converters, power, clock, programming, and communications. PCB layouts should follow the manufacturer land pattern and the exposed copper recommendations for the package.
Can C8051F064-GQ replace C8051F060-GQ without changing the PCB?
The C8051F064-GQ is a same-package C8051F06x candidate for drop-in evaluation because it uses a 100-pin TQFP and retains the 25 MHz, 64 KB flash, 16-bit ADC, and 59-I/O class of the target. However, firmware, peripheral mapping, analog channels, and device-specific functions must be checked against the manufacturer data sheet before production substitution.
When should I choose C8051F060-GQ instead of C8051F064-GQ?
Choose the C8051F060-GQ when its exact device-specific peripheral configuration matches the existing firmware and board design. The C8051F064-GQ offers a same-family, same-package alternative, but a footprint match alone does not guarantee identical peripheral behavior. Review the pin descriptions, interrupt vectors, analog-channel assignments, and required Silicon Labs device support before selecting either member.
What can replace C8051F060-GQ as a direct drop-in part?
The closest documented drop-in candidates are the C8051F062-GQ, C8051F064-GQ, and C8051F066-GQ, all from the 100-pin C8051F06x family. They preserve the target's package and core resource class, but they are not necessarily identical in peripheral configuration. Firmware and pin-function review remains mandatory, and the Request a Quote form on this page can help with current sourcing.
Is C8051F060-GQ suitable for industrial sensor measurement?
The C8051F060-GQ is well suited to industrial sensor measurement because it combines two 16-bit 1 Msps ADCs, 59 digital I/O pins, and CAN in one device. It can acquire analog sensor inputs, manage digital sensors and actuators, and transmit measurements through an industrial network. Its -40°C to +85°C operating range supports demanding embedded equipment when layout and thermal requirements are controlled.
Where can I buy C8051F060-GQ and check current availability?
Use the Request a Quote form on this page to request the current C8051F060-GQ price, stock position, lead time, and package quantity with XAIPART. The manufacturer supports the C8051F06x series, but actual channel inventory and order timing can change. The form avoids relying on a stale listing figure and provides the appropriate route for a production sourcing request.
What is the lead time for C8051F060-GQ?
The current lead time for C8051F060-GQ should be requested through the Request a Quote form on this page with the required quantity and target delivery date. Lead time can vary with order volume, package form, and channel inventory. Firmware compatibility and alternate-family sourcing can be reviewed at the same time to reduce schedule risk.
Is C8051F060-GQ in stock for immediate shipment?
Current C8051F060-GQ stock is best confirmed through the Request a Quote form on this page. Submit the required quantity and shipment location, and the supplier can return the latest availability and lead-time position. Do not base a build schedule on an old cached stock count because finished-device inventory changes independently for each order.

Data referensi kejuruteraan untuk C8051F060-GQ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the C8051F060-GQ for mixed-signal embedded designs that need a 25 MHz 8051-compatible core, 59 digital I/O pins, 64 KB flash, and two 16-bit ADCs at up to 1 Msps in a 100-pin TQFP. It is especially suitable for CAN-connected industrial control, sensor acquisition, and measurement equipment. Evaluate the C8051F064-GQ first when its exact device-specific peripheral set matches the design, because it shares the package and principal resource ratings. Consider the C8051F062-GQ or C8051F066-GQ only after checking pin multiplexing, analog channels, interrupts, clocking, and firmware support against the manufacturer data sheet. None of these family members should be treated as automatically interchangeable merely because they use the same footprint; production qualification must include electrical, timing, peripheral, and firmware verification.

Perbandingan dengan Gantian

Parametr Produk Ini C8051F062-GQ C8051F064-GQ C8051F066-GQ
Package 100-TQFP (14x14) 100-TQFP (14x14) 100-TQFP (14x14) 100-TQFP (14x14)
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
CPU Core 8051-compatible CIP-51 8051-compatible CIP-51 8051-compatible CIP-51 8051-compatible CIP-51
Maximum CPU Frequency 25 MHz 25 MHz 25 MHz 25 MHz
Flash Memory 64 KB 64 KB 64 KB 64 KB
RAM 4,352 bytes 4,352 bytes 4,352 bytes 4,352 bytes
Digital I/O 59 pins 59 pins 59 pins 59 pins
ADC Configuration Two 16-bit ADCs, up to 1 Msps Two 16-bit ADCs, up to 1 Msps Two 16-bit ADCs, up to 1 Msps Two 16-bit ADCs, up to 1 Msps
Communications CAN CAN CAN CAN
Operating Temperature Range -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C
Mounting Type Surface mount Surface mount Surface mount Surface mount
Program Memory Type In-system programmable flash In-system programmable flash In-system programmable flash In-system programmable flash

Penyeberangsung Jelas

  • Dual integrated high-resolution ADCs (vsC8051F064-GQ)
  • Large digital control capacity in one package (vsC8051F062-GQ)
  • Integrated CAN with deterministic control capability (vsC8051F066-GQ)

Catatan Desain

Place the required power-decoupling capacitors close to the device power pins and follow the manufacturer TQFP land pattern exactly. Route analog inputs directly from their connectors to the associated ADC pins with short traces and a continuous return path. Keep switching-regulator traces, motor outputs, and high-current return paths away from the analog section. The 100-pin package offers substantial routing flexibility, but correct decoupling and analog isolation remain more important than minimizing total board area.

Treat the two ADC signal paths as separate analog channels and verify input range, source impedance, acquisition time, and the selected gain configuration in the device documentation. Add appropriate input filtering where sensor outputs are noisy, but maintain the impedance and settling requirements for 16-bit conversion. For measurements requiring tight timing relationships, use the dual converters coherently and validate channel skew with calibrated equipment before production.

Do not treat a matching 100-pin TQFP footprint as proof that every C8051F06x member has identical behavior. Before replacing the C8051F060-GQ with C8051F062-GQ, C8051F064-GQ, or C8051F066-GQ, compare pin multiplexing, analog-channel assignments, interrupt sources, peripheral availability, clock requirements, and device identifiers in the Silicon Labs data sheet. Rebuild and retest firmware with the selected alternate rather than assuming binary compatibility.

Provide continuous copper beneath the TQFP footprint where the land pattern permits it and avoid long exposed-heat-pad routes through narrow thermal spokes. Keep regulators and other heat sources physically separated from the MCU and analog components when enclosure temperatures are high. Validate the assembled design at the maximum expected ambient temperature because 25 MHz processing, ADC activity, and external interface activity all contribute to board-level thermal conditions.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The manufacturer data sheet and product listings do not explicitly establish the requested compliance attributes for C8051F060-GQ.

Pencarian Berhubungan

c8051f060 gqr c8051f060 datasheet C8051F060-GQ datasheet pdf C8051F060-GQ pinout C8051F060-GQ specifications C8051F060-GQ replacement C8051F060-GQ equivalent C8051F060-GQ vs C8051F064-GQ C8051F060-GQ 25MHz 64KB C8051F060-GQ dual ADC application Silicon Labs C8051F060-GQ C8051F060-GQ price C8051F060-GQ stock

Komponen dan Tanda berkaitan

Silicon Labs C8051F060-GQ C8051F062-GQ C8051F064-GQ C8051F066-GQ C8051F06x CIP-51 core 8051-compatible microcontroller 8-bit microcontroller mixed-signal system-on-chip flash memory successive-approximation ADC CAN controller industrial network communication TQFP-100 surface-mount package digital I/O sensor acquisition industrial control RoHS REACH AEC-Q100
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ