Texas Instruments

CD40193BD - 4-Bit Dual-Clock Counter | Texas Instruments

MPN: CD40193BD ✓ Aktif
16-CDIP Package 2 independent clocks Speed
MOQ: 1 |

CD40193BD Ringkasan

The Texas Instruments CD40193BD is a CMOS presettable 4-bit binary up/down counter with separate increment and decrement clocks, reset control, and positive-edge counting in a 16-pin CDIP package. The device operates synchronously, supports bidirectional counting, and has a stated propagation delay of 500 ns. Its military temperature grade and 5.08 mm seated height suit industrial, control, instrumentation, and legacy digital-system designs.

A binary up/down counter is a sequential logic device that increments or decrements a 4-bit binary value according to the active clock input. The CD40193BD adds preset and reset controls, allowing the counter state to be loaded or cleared independently of its counting inputs. This places it within the CMOS logic IC hierarchy: counter > sequential logic > digital logic > integrated circuit. Unlike a mechanical counter, it provides electronic state storage, programmable count direction, and direct interface logic levels.

The principal functional characteristics are 4-bit counting capacity, dual-clock up/down operation, positive-edge triggering, a 16-pin through-hole CDIP package, and a 500 ns propagation delay. These parameters make the part useful where a compact bidirectional event counter must respond deterministically to separate increment and decrement commands. Preset capability also supports repeatable sequence generation, decade-oriented control functions, and position tracking without additional external state registers.

The counter operates from a single power rail and uses CMOS logic inputs. Its synchronous operation means that the counter state changes on the active clock edge, helping avoid asynchronous data races in sequential control systems. The 500 ns propagation-delay figure is the principal timing constraint when determining the maximum clock rate or the required settling interval before sampling the four output bits.

Typical applications include industrial counters, stepper-motor position accumulators, frequency-divider and sequencing logic, test and measurement systems, and legacy control equipment. It can also implement pulse-domain position tracking when increment pulses represent forward motion and decrement pulses represent reverse motion. In such systems, the preset input initializes a known reference position, while the reset input establishes a clear starting condition.

Designers should route each clock only to the intended count-direction input and account for the 500 ns propagation delay when sampling outputs. Decoupling close to the power pins helps control supply noise, while unused inputs must be tied to a defined logic level. Because the part is packaged as a 16-pin CDIP rather than a surface-mount device, board layout must preserve through-hole footprint clearance and adequate spacing for insertion and soldering.

This product overview combines the manufacturer description, distributor device attributes, package details, timing information, and cross-reference findings into an engineering-focused guide. It also identifies design constraints and package-specific information that help engineers assess CD40193BD suitability before integrating it into a new PCB or replacing an existing counter.

Pilihan pengganti yang segera untuk CD40193BD — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

CD40193BD/3

✅ Masuk Drop-In
📦 16-CDIP
Same 4-bit, 16-pin CD40193 family architecture; the available record does not state an electrical or timing deviation from CD40193BD

📋 Alternatif rujukan (tidak dalam katalog)

CD40193BD Penilaian maksimum & Ciri-ciri Elektrik

Counter Type Binary up/down counter
Counting Element 1 element
Counter Width 4 bits
Logic Family CMOS
Counting Direction Up or down
Clock Inputs 2 independent clocks
Edge Trigger Positive edge
Operating Mode Synchronous
Preset Function Presettable
Reset Function Resettable
Propagation Delay 500 ns
Number of Terminals 16 terminals
Kemasan 16-CDIP
Package Form Rectangular DIP
Jenis Pemasangan Through-hole
Temperature Grade Military
Seated Height 5.08 mm

Panduan Konfigurasi Pin CD40193BD rectangular dip

Konfigurasi pin untuk CD40193BD (rectangular dip pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai rectangular dip untuk CD40193BD

Tiada data garisan pin yang diperoleh untuk CD40193BD.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

CD40193BD patut untuk 6 aplikasis: Industrial Pulse Counter, Stepper-Motor Position Accumulator, Digital Frequency Divider, Test and Measurement Sequence Control, Legacy Equipment Repair, Repeatable Timing Sequence.

🏭

Industrial Pulse Counter

The CD40193BD is appropriate for an industrial event-counting module that receives forward events on one clock and reverse events on the other. Its 4-bit synchronous counter state records 16 count positions, while the separate positive-edge inputs prevent direction ambiguity. A 500 ns propagation delay allows a moderately paced event stream to be sampled after the clock edge. The 16-CDIP through-hole format also suits repairable control equipment with larger through-hole spacing. The preset function can establish a reference position, and reset can clear the count after a completed cycle. Before finalizing the board, verify the supply limits, logic thresholds, and operating-temperature limits against the manufacturer datasheet.

🔧

Stepper-Motor Position Accumulator

A stepper-motor axis can use the CD40193BD to accumulate commanded position by routing forward-step pulses to the up-count clock and reverse-step pulses to the down-count clock. The 4-bit output provides a modulo-16 position state, and preset allows the axis to be re-zeroed at a known coordinate. Because counting is synchronous and positive-edge triggered, the direction input can change without introducing a ripple-style count sequence. The stated 500 ns propagation delay defines the interval before the counter outputs should be considered settled. This application is best suited to low-speed positioning where the 4-bit range and listed timing are adequate.

⏱️

Digital Frequency Divider

The CD40193BD can divide a periodic input into a lower-rate count sequence by applying the source signal to one of its clock inputs. The four counter outputs then represent successive binary states, allowing downstream logic to derive divided timing or discrete sequencing intervals. Positive-edge triggering gives a defined sampling point, and the 500 ns propagation delay provides the minimum interval before the outputs are used. The part is most appropriate for moderate-frequency control signals where a 4-bit counter is sufficient. Engineers should derive the actual maximum input frequency from the required settling margin and confirm the electrical operating limits before fixing the clock source.

🖥️

Test and Measurement Sequence Control

In a test instrument, the CD40193BD can track successive fixture steps or measurement events in a compact 4-bit sequence. The preset control initializes the sequence at a defined state, while reset supports restarting a measurement pass. Separate count clocks allow motion or acquisition-complete events to advance the sequence in opposite directions. Its listed 500 ns propagation delay helps the controller determine when output bits are stable for sampling. The 16-CDIP package is useful in laboratory instruments designed for through-hole construction and serviceability. The design must still account for the limited 4-bit range and verify supply, noise, and temperature constraints from the manufacturer documentation.

🔧

Legacy Equipment Repair

The CD40193BD is useful for maintaining older industrial and laboratory equipment that used a through-hole 16-pin bidirectional counter. Its military temperature grade and 5.08 mm seated height are explicitly identified for the device, helping engineers match the mechanical characteristics of the original board. The 4-bit synchronous counting function can replace a failed counter without redesigning the surrounding logic. Board restoration should still verify pin orientation, supply voltage, reset polarity, and clock behavior against the equipment schematic. The package is suitable for conventional through-hole soldering and axial or radial insertion where sufficient board clearance is available.

⚙️

Repeatable Timing Sequence

The CD40193BD can generate a repeatable sequence of up to 16 timing states when driven from a periodic clock. Preset establishes the first state, while the binary outputs advance on each positive edge and provide decoded timing-enable signals. The 500 ns propagation delay should be included in the setup and hold requirements of any logic driven by the outputs. This approach is practical for legacy sequencing controllers and automated test fixtures that need simple modulo-16 behavior without a microcontroller. Validate clock rise and fall times, supply-noise tolerance, and output loading against the manufacturer specifications before using the counter with long external traces.

Ringkasan Produk Disebarkan

CD40193B Same counter family Dipergunakan di: Industrial Pulse Counter, Stepper-Motor Position Accumulator, Digital Frequency Divider, Test and Measurement Sequence Control, Legacy Equipment Repair, Repeatable Timing Sequence CD40193BD Texas Instruments Dipergunakan di: Industrial Pulse Counter, Stepper-Motor Position Accumulator, Digital Frequency Divider, Test and Measurement Sequence Control, Legacy Equipment Repair, Repeatable Timing Sequence
What is the CD40193BD?
The CD40193BD is a synchronous, presettable 4-bit binary up/down counter with separate increment and decrement clock inputs. According to the manufacturer product description, it is a CMOS counter with dual clocks and reset, packaged as a 16-pin CDIP for through-hole industrial and legacy counter designs.
What are the key specifications of CD40193BD that engineers should know?
The CD40193BD is a 4-bit CMOS binary up/down counter with two positive-edge clock inputs, preset and reset functions, and a 16-CDIP package. Distributor device records identify one counting element, a 500 ns propagation delay, a military temperature grade, and a 5.08 mm seated height. These characteristics define its logic, timing, and mechanical constraints.
What is the propagation delay of the CD40193BD?
The CD40193BD has a stated propagation delay of 500 ns. This timing value comes from the device listing for the counter and should be used when determining the allowable clock period and the settling time before the four counter outputs are sampled. The maximum operating frequency is not stated on the product page.
How does the CD40193BD count up and down?
The CD40193BD increments its 4-bit binary state when the up-count clock receives an active positive edge and decrements it when the down-count clock receives an active positive edge. The manufacturer identifies the device as a CMOS presettable binary up/down counter with dual clocks, allowing direction to be controlled by selecting the appropriate clock input.
Where can I download the CD40193BD datasheet PDF?
The official CD40193B product page at Texas Instruments provides manufacturer documentation and ordering information for the counter family. A separate CD40193 datasheet listing also links to the National Semiconductor document. Use the official CD40193B product page for the most appropriate revision and confirm that the selected ordering code matches the 16-CDIP CD40193BD configuration.
Where can I find the CD40193BD pinout?
The CD40193BD pin assignment is defined in the manufacturer CD40193B datasheet under the pin-configuration and terminal-description tables. The device uses a 16-pin CDIP package with two counting clocks, four binary outputs, preset and reset controls, power, and ground. Use that table when assigning PCB tracks and verifying each signal name.
Is CD40193BD suitable for industrial counter applications?
Yes, the CD40193BD is suitable for industrial counter applications that require a 4-bit up/down count, dual positive-edge clocks, and a through-hole package. Its listed military temperature grade and 5.08 mm seated height support ruggedized equipment use, while the 500 ns propagation delay must be included in the system timing budget.
Can CD40193BD be used as a stepper-motor position accumulator?
Yes, the CD40193BD can accumulate position by feeding forward-motion pulses to its up clock and reverse-motion pulses to its down clock. Its 4-bit state provides 16 count positions, and the preset function can establish a known reference count. The 500 ns propagation delay determines how quickly the output state becomes valid after an active clock edge.
CD40193BD vs CD40193B - what is the difference?
CD40193BD is a specific 16-CDIP ordering configuration of the CD40193B counter family, while CD40193B identifies the broader device family and its available orderable variants. The manufacturer describes the family as a CMOS presettable binary up/down counter with dual clocks and reset. Package, grade, and suffix details must be checked against the ordering table before substitution.
What can replace the CD40193BD?
The closest documented replacement candidate is the RCA CD40193BD/3, which appears in a dedicated cross-reference result under the same CD40193BD device family. Before treating it as a drop-in replacement, verify its 16-pin footprint, electrical limits, timing, temperature grade, and lifecycle status against the original requirements. No other pin-compatible candidates were established from the available records.
Is CD40193BD the same as CD40193BD/3?
No, CD40193BD and CD40193BD/3 are distinct ordering codes, so they should not be treated as automatically identical. Both belong to the CD40193 family, but the manufacturer suffix can encode configuration, grade, or sourcing differences. Confirm the package, temperature range, supply limits, clock timing, and qualification requirements before approving either device for a new assembly.
When should I choose the CD40193BD over another up/down counter?
Choose the CD40193BD when the design needs a 4-bit synchronous counter with separate positive-edge up and down clocks, preset and reset functions, and a 16-CDIP through-hole footprint. Its listed 500 ns propagation delay makes it suitable for moderate-speed control logic. It is less suitable when a surface-mount package, wider count, or faster timing is required.
Where to buy the CD40193BD online?
Use the Request a Quote form on this page to request CD40193BD availability, commercial terms, and current lead time. The listing records identify a 16-CDIP counter from Harris Corporation under the same exact MPN, but they do not print a qualifying quantity-break price table. A purchase order should be released only after package, grade, and lifecycle requirements are confirmed.
What is the price of the CD40193BD?
The current commercial price for the CD40193BD should be requested through the Request a Quote form on this page. The available distributor and marketplace records do not show an explicit quantity-break table for the exact MPN, so no unit price is stated here. The quote should specify the 16-CDIP package, military temperature grade, and required delivery quantity.
What is the lead time and stock status for CD40193BD?
Current stock and lead time should be confirmed through the Request a Quote form on this page because the commercial listing records do not provide a dated stock commitment for the exact MPN. Procurement should include the required quantity, package, temperature grade, and inspection needs in the request. A distributor inventory message alone should not be treated as a guaranteed allocation.
Is the CD40193BD compliant with RoHS and REACH?
The RoHS and REACH status of the exact CD40193BD ordering code is not stated on the available product pages, so both must be treated as unknown until confirmed by the manufacturer. Request the current material or environmental compliance declaration for the specific manufacturer and lot configuration. Do not infer compliance for the CD40193BD from a broader CD4000-series family statement.

Data referensi kejuruteraan untuk CD40193BD — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the CD40193BD when a design requires a 4-bit synchronous binary counter with separate positive-edge up and down clocks, preset and reset controls, and a 16-CDIP through-hole footprint. It is particularly suitable for industrial pulse counting, stepper-position accumulation, and repair of legacy equipment with military-grade through-hole components. The documented 500 ns propagation delay must be included in the timing budget, and the 4-bit range makes it inappropriate where more than 16 states are needed. CD40193BD/3 is the only documented cross-family candidate in the available records, but its temperature grade, electrical limits, and timing must be verified before drop-in approval. For a surface-mount redesign, wider counter, or faster operation, choose a different architecture rather than assuming that the RCA ordering code is interchangeable.

Perbandingan dengan Gantian

Parametr Produk Ini CD40193BD/3
Brand Texas Instruments RCA
Package 16-CDIP 16-CDIP
Counter Type Binary up/down counter Binary up/down counter
Counter Width 4 bits 4 bits
Counting Element 1 element 1 element
Clock Configuration Dual clock Dual clock
Triggering Positive edge Positive edge

Penyeberangsung Jelas

  • Independent positive-edge count directions (vsCD40193BD/3)
  • Documented 500 ns propagation delay (vsCD40193BD/3)
  • Explicit military-grade designation (vsCD40193BD/3)
  • Mechanical height documented for legacy-board restoration (vsCD40193BD/3)

Catatan Desain

Use the 500 ns propagation delay as the minimum settling reference after an active positive clock edge. Sample the four counter outputs only after this interval, and ensure any external logic connected to those outputs satisfies the input setup and hold requirements. Keep clock traces short and away from noisy switching nodes because the counter responds to edges rather than voltage levels.

Do not allow both count-direction clocks to switch without deliberate system timing. Routing unrelated signals to the unused clock can create unintended increments or decrements. When the unused clock is disabled, connect it to a defined inactive logic level, and verify reset and preset polarity directly from the manufacturer terminal-description table before making PCB assignments.

Plan the board around the 16-CDIP footprint rather than a generic 16-pin DIP position without checking the exact body and lead geometry. Maintain adequate clearance around the counter for through-hole insertion and soldering, including the stated 5.08 mm seated height. Place the bypass capacitor close to the power and ground pins and route clock and counter-output traces away from switching-power nodes.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product and distributor records do not state exact-MPN RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. The military temperature grade must not be interpreted as AEC-Q100 automotive qualification.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

CD40193BD datasheet CD40193BD pinout CD40193BD datasheet pdf CD40193BD equivalent CD40193BD replacement CD40193BD cross reference CD40193BD 16-CDIP CD40193BD 4-bit counter CD40193BD 500 ns propagation delay CD40193BD price CD40193BD stock Texas Instruments CD40193BD

Komponen dan Tanda berkaitan

Texas Instruments CD40193BD CD40193B CD40193BD/3 RCA CMOS binary up/down counter presettable counter synchronous counter sequential logic digital logic IC positive-edge triggering 4-bit counter dual clock propagation delay 500 ns 16-CDIP through-hole package military temperature grade 5.08 mm seated height industrial counter stepper-motor position accumulator frequency divider timing sequence generator
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ