CD4024BCM - 7-Bit Binary Counter | onsemi | SOIC-14
MPN: CD4024BCM ✓ AktifCD4024BCM Ringkasan
A binary counter is a sequential digital circuit that stores and advances a count represented in binary form. Within the logic-IC hierarchy, the CD4024 belongs to the counter and divider class, combines CMOS switching characteristics with ripple-carry binary counting, and serves as a fundamental building block for digital state machines, event counters, programmable timing modules, and low-frequency divider chains.
The principal identified features are one independent 7-bit counting element, negative-edge clock triggering, binary counter operation, and a 14-SOIC package. Negative-edge operation means the count advances on the falling clock transition rather than the rising transition, making the device useful when a system derives its timing reference from the falling edge of a periodic waveform. The single-element organization also allows cascading multiple packages when a wider count range or additional divided outputs are required.
The counter architecture supports straightforward chaining because its parallel binary outputs can feed the clock input of a following stage. Cascading increases the available count range and permits division of an input clock by a greater power of two when each stage supplies one additional binary bit. Designers should pay close attention to clock-edge requirements, propagation delay through the ripple-carry path, reset timing, and the voltage levels presented to the inputs when combining this part with other CMOS logic families.
Typical applications include digital frequency division, pulse-counting modules, programmable sequencing controllers, industrial timer interfaces, clock-generation blocks, and embedded automation logic. The device is particularly appropriate when a compact seven-bit counter is needed without the complexity of a microcontroller. In such systems, external gating can define the counted interval, while the parallel outputs expose the count for display, control, or comparison with another digital subsystem.
The principal design consideration is ensuring that every clock, reset, and data input remains within the electrical limits specified by the manufacturer. Layout should minimize clock-node capacitance and keep high-current switching loops away from counter output traces to reduce coupling into the least-significant count bit. Power-supply decoupling close to the package and deliberate grounding are important when the output is used to control nearby analog, communication, or timing circuitry.
This product page combines the exact CD4024BCM identity with package-specific guidance, application-oriented counter examples, drop-in replacement options, and engineering selection criteria. It is intended to help engineers identify the correct counter, verify pin and package compatibility, and integrate the device without overlooking edge-triggering, reset, timing, or layout requirements.
Pilihan pengganti yang segera untuk CD4024BCM — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CD4024BCM (sama faktor bentuk dan kaki) — berbeza dalam Logic Family, Counter Type, Package, Mounting Type, Clock Edge.
CD4024BM
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →CD4024BMTE4
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD4024BCMX
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD4024BE
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →HEF4024BT
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CD4024BCM Penilaian maksimum & Ciri-ciri Elektrik
| Counter Type | Binary counter |
| Number of Counter Elements | 1 element |
| Counter Length | 7 bit |
| Clock Edge | Negative edge |
| Logic Family | CMOS |
| Kemasan | 14-SOIC |
| Total Pin Count | 14 pins |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin CD4024BCM 14-soic
Konfigurasi pin untuk CD4024BCM (14-soic pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CD4024BCM.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CD4024BCM patut untuk 6 aplikasis: Digital Frequency Divider, Industrial Event Counter, Programmable Sequence Controller, Pulse and Repetition Counter, Clock and Timing Generator, Retrofit and Legacy Counter Logic.
Digital Frequency Divider
The CD4024BCM is well suited to a digital frequency-divider stage because it provides seven binary outputs and advances on the negative edge of the clock. A 7-bit counter divides its input frequency by 128 at the most significant output, while additional stages can be cascaded for higher powers of two. Each package adds seven count bits, and the parallel outputs can drive downstream comparators or timing-control logic. The main design constraint is clock-to-output propagation delay: the usable input frequency must remain within the timing limits published in the onsemi CD4024BCM datasheet, particularly when several ripple-carry stages are chained.
Disebarkan
Industrial Event Counter
The onsemi CD4024BCM can count filtered events in an industrial control module while avoiding a dedicated microcontroller for a basic counting function. Its seven parallel outputs represent the accumulated event count in binary, allowing a controller to compare the result against thresholds or decode discrete count ranges. Negative-edge clocking makes it straightforward to define the counting edge when a sensor or conditioning circuit produces a clean pulse. Because the counter is a ripple-carry CMOS device, the input pulse width, reset release timing, and maximum clock rate must satisfy the manufacturer timing requirements.
Disebarkan
Programmable Sequence Controller
A CD4024BCM-based sequence controller uses the seven counter outputs to generate repeatable states for a multi-step process. The count advances on the negative edge of a system clock, and external decode logic can activate outputs or set the next timing interval when a particular binary state is reached. The device is useful for short, fixed sequences in appliance controls, test fixtures, and automated machinery where a small number of states is sufficient. Design the reset and clock paths carefully so noise or an uncontrolled input transition cannot cause unintended state advancement.
Disebarkan
Pulse and Repetition Counter
The CD4024BCM can act as a pulse and repetition counter in timing, test, or repetitive-cycle logic. A conditioned pulse train drives the clock input, and the seven outputs retain the current count until reset or rollover. This arrangement is useful when a system must determine whether a pulse sequence has reached a programmed threshold without converting every event into a software operation. The counter should be clocked by a signal that remains within the specified voltage and timing limits; slow input edges or excessive input capacitance can cause unreliable count advancement in a CMOS circuit.
Disebarkan
Clock and Timing Generator
The CD4024BCM can divide a master clock into lower-rate binary timing signals for digital control logic. Each of its seven outputs corresponds to a successively lower frequency, and cascading packages extends the division range. The negative-edge trigger provides a defined sampling transition for timing-state logic, while the parallel outputs simplify clock distribution through decoding or gating. At higher frequencies, account for cumulative propagation delay and the timing relationship between the clock and count outputs. At low frequencies, supply noise and slow input transitions become more important, so clean clock generation and local decoupling are essential.
Disebarkan
Retrofit and Legacy Counter Logic
The CD4024BCM is useful when maintaining or reproducing older equipment that used a discrete seven-bit binary counter rather than a programmable controller. Its 14-SOIC package permits direct assembly on compatible boards, and the familiar seven-bit negative-edge architecture simplifies restoration of digital timing and sequencing blocks. A replacement such as the CD4024BCMX can be considered where the footprint remains compatible, but the original design's supply voltage, clock rate, reset polarity, and environmental limits must be checked against the replacement manufacturer datasheet before substitution.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CD4024BCM — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CD4024BM | CD4024BMTE4 | CD4024BCMX | CD4024BE | HEF4024BT |
|---|---|---|---|---|---|---|
| Package | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC | 14-SOIC |
| Brand | onsemi | onsemi | onsemi | STMicroelectronics | Texas Instruments | NXP |
| Counter Type | Binary counter | Binary counter | Binary counter | Binary counter | Binary counter | Binary counter |
| Counter Elements | 1 element | 1 element | 1 element | 1 element | 1 element | 1 element |
| Counter Length | 7 bit | 7 bit | 7 bit | 7 bit | 7 bit | 7 bit |
| Clock Edge | Negative edge | Negative edge | Negative edge | Negative edge | Negative edge | Negative edge |
| Logic Family | CMOS | CMOS | CMOS | CMOS | CMOS | CMOS |
Penyeberangsung Jelas
- Maintains a compact seven-bit counter in a standard surface-mount package (vsCD4024BCMX)
- Uses a defined negative-edge counting transition (vsHEF4024BT)
- Offers an onsemi-family path for maintaining the original qualification basis (vsCD4024BE)
Catatan Desain
Do not assume that every CD4024-family ordering code has identical electrical ratings. The CD4024BCM is identified as a 7-bit negative-edge counter in a 14-SOIC, but supply voltage, clock-rate, temperature, and reset timing limits must be checked for the exact replacement. Confirm that reset polarity and active levels agree before substituting a part on an existing board.
Keep the clock node physically short and use a clean edge to avoid double counting caused by ringing, slow transitions, or repeated crossing of the threshold. The negative-edge trigger means that a spurious transition near the active edge can advance the count incorrectly. When a slow or noisy source drives the input, add appropriate conditioning before the counter and evaluate the resulting rise and fall times against the manufacturer's timing requirements.
Place the device close to the logic that consumes its count outputs, and keep the ground and supply paths short. A local bypass capacitor helps control supply noise on the switching edges. Route clock and reset nets away from noisy motors, relays, and high-current switching nodes to reduce false transitions and coupling into the least-significant count bit.
Use the manufacturer-specified supply range for the entire counter chain. Cascaded CD4024BCM stages operate from the same rail, so the rail must remain within both the absolute-maximum and recommended operating limits. Check the cumulative current requirement of all attached logic and ensure that clock transitions do not produce supply excursions large enough to disturb nearby counters or control circuitry.
Maklumat Kesediaan
Compliance declarations were not present in the manufacturer or distributor page text for this exact ordering code. The part is a commercial CMOS logic IC rather than an automotive-qualified device, but qualification status should not be inferred solely from that product classification.