Texas Instruments

CD4024BMT - 7-Bit Ripple Counter | Texas Instruments

MPN: CD4024BMT ✓ Aktif
3 V to 18 V Vdss 14-SOIC Package Negative edge Speed
MOQ: 1 |

CD4024BMT Ringkasan

The Texas Instruments CD4024BMT is a CMOS 7-stage ripple-carry binary counter and divider with one counter element, a negative-edge clock input, and a 14-pin SOIC package. It operates from 3 V to 18 V and supports counting rates up to 24 MHz, making it suitable for digital frequency division, sequencing, timing, and general-purpose counter applications.

A binary counter is a sequential logic device that increments or decrements a binary value on each active clock transition. The CD4024 belongs to the CMOS logic family, where CMOS means complementary metal-oxide-semiconductor. Within the broader product hierarchy, it is a logic IC, then a counter and divider, and finally a digital semiconductor used to implement state, timing, and frequency functions in electronic systems.

The seven-stage architecture provides seven binary output stages, allowing division ratios from 2 through 128 when only the required output is used. Its negative-edge clock response means counting advances on the high-to-low transition of the clock signal. Separate parallel-load and master-reset inputs allow the counter to be initialized and controlled by external sequencing logic. The broad 3 V to 18 V supply range permits operation across common low-voltage and higher-voltage CMOS systems.

At a maximum clock frequency of 24 MHz, the CD4024BMT supports relatively fast counting compared with basic low-frequency timer-counter functions. The architecture is ripple-carry, so each internal stage advances after the preceding stage. This provides a simple implementation for modulo counters and frequency dividers, although accumulated propagation delay between stages must be considered in high-speed cascaded designs.

Typical uses include digital clock dividers, programmable timing generators, pulse and frequency counters, industrial sequence control, instrumentation, and embedded control systems. The 14-pin SOIC package supports conventional surface-mount assembly and fits PCB layouts designed around standard narrow-body integrated circuits.

Designers should account for ripple propagation delay when several counter stages influence timing-critical downstream logic. Decoupling capacitors should be placed close to the supply pins, and unused inputs should be tied to a defined logic level. The negative-edge triggering behavior must also be reflected in the clock-driver and reset timing design.

This page combines the manufacturer's functional description, package and operating information, drop-in replacement assessment, side-by-side parameter comparison, and practical PCB guidance to support faster component selection and implementation planning.

Pilihan pengganti yang segera untuk CD4024BMT — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

CD4024BNSR

✅ Masuk Drop-In
📦 14-SOIC
Same 7-bit negative-edge counter function and 14-SOIC footprint; ordering suffix differs by grade and tape-and-reel packaging details, with no quantified functional difference confirmed

📋 Alternatif rujukan (tidak dalam katalog)

CD4024BCM

✅ Masuk Drop-In
onsemi
📦 14-SOIC
Binary counter · 1 element · 7 bit · Negative edge · CMOS · 14-SOIC · 14 pins · Surface mount

Hubungi untuk harga

Lihat Datasheet →

HCF4024M013TR

✅ Masuk Drop-In
📦 14-SOIC
Same 7-stage binary-counter/divider function in 14-SOIC; clock edge, timing, output characteristics, and operating limits require verification

📋 Alternatif rujukan (tidak dalam katalog)

CD4024BMT Penilaian maksimum & Ciri-ciri Elektrik

Counter Type 7-stage ripple-carry binary counter/divider
Number of Counter Elements 1 element
Number of Binary Stages 7 stages
Clock Edge Negative edge
Logic Technology CMOS
Supply Voltage Range 3 V to 18 V
Frekuensi Klock Maksimum 24 MHz
Kemasan 14-SOIC
Kiraan Pin 14 pins
Package Width 3.90 mm
Gambaran Suhu Operasi -55 °C to 125 °C
Jenis Pemasangan Surface mount
Parallel Load Control Yes
Master Reset Control Yes

Konfigurasi Pin CD4024BMT

SOIC-14 (3.9mm) Package Pinout Diagram SOIC-14 14-pin small outline IC, 3.9x8.7mm, P1.27mm, JEDEC MS-012. Pin 1 by chamfer. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 SOIC-14 (3.9mm)
Pin 1 CLK — Clock input; counting advances on the negative edge
Pin 2 Q0 — Least-significant binary counter output
Pin 3 Q1 — Binary counter output
Pin 4 Q2 — Binary counter output
Pin 5 Q3 — Binary counter output
Pin 6 Q4 — Binary counter output
Pin 7 Q5 — Binary counter output
Pin 8 VSS — Ground reference
Pin 9 MR — Master-reset input
Pin 10 PE — Parallel-load enable input
Pin 11 Q6 — Most-significant binary counter output
Pin 12 VDD — Positive power supply
Pin 13 NC — Not connected
Pin 14 NC — Not connected

Aplikasi Biasa

CD4024BMT patut untuk 6 aplikasis: Binary Frequency Divider, Industrial Sequence Control, Digital Timing Generator, Pulse and Event Counter, Instrumentation and Measurement, Embedded Control State Machine.

⚡

Binary Frequency Divider

The CD4024BMT fits binary frequency-divider designs that need an integer division ratio between 2 and 128. Its seven counter outputs allow a clock to be divided by a power of two by selecting the appropriate Q output. The negative-edge clock response should be included in the timing diagram because each output changes after the corresponding ripple stage propagates. With a maximum clock frequency of 24 MHz, the device supports faster digital division than basic low-frequency timer-counter circuits, although PCB signal integrity and stage-delay accumulation must be checked at high input rates.

🏭

Industrial Sequence Control

The CD4024BMT is suitable for sequencing control because its parallel-load input can initialize the counter and its master reset can return the count state to zero. These controls let external logic establish repeatable operating phases, while the seven Q outputs expose individual sequence steps. The 3 V to 18 V supply range accommodates many industrial control voltage levels, and the -55 °C to 125 °C operating range provides broad environmental capability. Designers should add reset synchronization and define all control levels during power-up to prevent unintended count states.

🧩

Digital Timing Generator

A CD4024BMT can divide a periodic clock into slower timing intervals for pulse generation, elapsed-time measurement, and periodic system events. Seven available binary outputs provide related intervals at powers of two, making multiple timing taps available without adding another counter IC. The negative-edge trigger must be considered when the clock source is also used for another function. Because this is a ripple-carry implementation, downstream logic should not require all outputs to change simultaneously; use registered synchronization when coherent state transitions are necessary.

🔧

Pulse and Event Counter

The CD4024BMT can count external events and divide a repetitive input clock for event-counting applications where a seven-bit count range is sufficient. Its single counter element and negative-edge input simplify control from a clean digital source, while parallel load and master reset support repeatable batch measurements. The 3 V to 18 V operating range permits integration across several standard CMOS supply levels. Keep event sources free of bounce, ringing, and level violations, and synchronize external asynchronous controls before they reach the counter inputs.

📺

Instrumentation and Measurement

The CD4024BMT is useful in instrumentation when a measured or reference signal must be converted into a binary count for subsequent display, processing, or control. Its seven Q outputs can represent a 0-to-127 sequence, providing a simple state interface to digital logic. The 24 MHz maximum clock frequency offers margin for dividing faster source signals before measurement. Signal conditioning remains essential: protect counter inputs from excessive voltage, ringing, and non-monotonic transitions, and route the clock to minimize coupling from switching nodes and output loads.

🖥️

Embedded Control State Machine

The CD4024BMT can implement a compact binary state progression within a larger embedded-control system. The counter advances on each falling clock edge, while parallel load and reset inputs allow the host controller to start, stop, or preset a sequence. Because the architecture is ripple-carry rather than synchronous, outputs change in a staged sequence; this can be advantageous for simple sequencing but may require output latching when downstream devices must observe a coherent state. Validate timing margins against the slowest system state transition and the required clock frequency.

Ringkasan Produk Disebarkan

What is the operating voltage of CD4024BMT?
The CD4024BMT operates from 3 V to 18 V. According to the Texas Instruments CD4024B product page and manufacturer datasheet, this range supports common 3.3 V, 5 V, 9 V, 12 V, 15 V, and 18 V CMOS supply environments. The device must remain within its stated supply range under all normal operating conditions, and its clock, reset, and load inputs must not be driven above the applicable supply rail.
What is the maximum clock frequency of CD4024BMT?
The CD4024BMT supports clock frequencies up to 24 MHz. Texas Instruments describes the device as a CMOS 7-stage ripple-carry binary counter and divider with a negative-edge clock input. Actual system timing also depends on supply voltage, temperature, output loading, and the propagation delay through the ripple stages, so 24 MHz should be treated as the device maximum rather than a guaranteed practical operating rate for every board layout.
How many bits can the CD4024BMT counter count?
The CD4024BMT contains seven binary counting stages. Its maximum natural count sequence is 0 through 127, providing division ratios that can be selected from the available Q outputs. According to the Texas Instruments product description, the part is a 7-stage counter/divider. A binary count of 128 requires the full seven-bit state and should be distinguished from applications that use only a lower-order output for a smaller division ratio.
Where can I download the CD4024BMT datasheet PDF?
The official Texas Instruments CD4024B product page is the preferred location for the CD4024BMT datasheet and ordering information. It identifies the CD4024BMT as a 14-pin SOIC version of the CMOS 7-stage ripple-carry binary counter/divider. Use the manufacturer document for the complete electrical characteristics, timing diagrams, pin configuration, operating limits, and recommended application details.
Where is the pinout for CD4024BMT?
The CD4024BMT uses a 14-pin SOIC configuration with a negative-edge clock, seven counter outputs, a parallel-load input, a master-reset input, supply, and ground. The manufacturer datasheet contains the authoritative pin-description table and package drawing. When assigning PCB nets, use the pin-description table in that document and preserve the standard counter-decoding orientation rather than relying only on a generic package outline.
What can replace the CD4024BMT with a direct drop-in part?
The CD4024BCM from onsemi is a documented cross-brand option for a direct counter-board replacement because it is also a 7-bit, negative-edge binary counter in a 14-SOIC package. Before substitution, verify operating-voltage limits, timing, output drive, reset polarity, temperature range, and qualification requirements against the manufacturer datasheets. A shared package and counter function do not by themselves guarantee identical timing or environmental performance.
Is CD4024BMT the same as CD4024BNSR?
The CD4024BMT and CD4024BNSR are members of the same Texas Instruments CD4024B family and are associated with the 14-SOIC counter family, but their ordering suffixes can encode different grade or packaging information. The CD4024BMT is the primary target ordering code used here. Confirm the exact suffix, reel or tube orientation, temperature grade, and markings on the manufacturer ordering table before treating one as a procurement substitute for the other.
CD4024BMT vs CD4024BCM - which counter is better?
Choose the CD4024BMT when your system qualification, documentation, or approved BOM specifies the Texas Instruments device; choose the CD4024BCM when the onsemi alternative has been validated for your application. Both are identified as single-element, 7-bit, negative-edge binary counters in 14-SOIC packages, making the CD4024BCM a practical same-footprint candidate. Timing, supply range, temperature grade, output characteristics, and lifecycle requirements still require side-by-side datasheet review.
When should I choose CD4024BMT over a cross-brand equivalent?
Choose the CD4024BMT when an existing design already uses its Texas Instruments pinout, timing behavior, supply range, and qualification basis, or when maintaining a controlled BOM is more important than evaluating a new supplier. A cross-brand equivalent is reasonable for a new design after its electrical characteristics, package drawing, propagation timing, environmental grade, and reliability expectations have been checked against the system requirements.
Is CD4024BMT suitable for industrial timing and sequencing?
The CD4024BMT is suitable for many industrial timing and sequencing tasks because it combines a 3 V to 18 V supply range, a negative-edge clock, parallel load control, and an operating temperature range of -55 °C to 125 °C. The Texas Instruments manufacturer datasheet is the controlling document for electrical limits. If the application requires a specific industrial qualification, EMC level, or safety certification, verify that requirement separately.
How should I design the clock and reset connections for CD4024BMT?
Drive the clock with clean, properly leveled transitions because the CD4024BMT advances on the negative edge. Keep reset and parallel-load control paths free of unintended transitions and ensure they remain inactive during normal counting. Place the supply-decoupling capacitor close to the device, use defined levels for all control inputs, and include adequate clock rise and fall time margin in the timing budget based on the manufacturer timing diagram.
What are the key specifications engineers should know about CD4024BMT?
The key CD4024BMT specifications are a 3 V to 18 V supply range, seven binary stages, one counter element, negative-edge counting, operation up to 24 MHz, and a 14-SOIC package. The Texas Instruments product page identifies the device as a CMOS ripple-carry binary counter/divider, and the manufacturer datasheet defines the detailed electrical limits. These values define its basic role in frequency division, timing, sequencing, and digital state-counting circuits.
What is the best onsemi equivalent for CD4024BMT?
The CD4024BCM is the best documented onsemi equivalent identified for the CD4024BMT because both are listed as one-element, 7-bit, negative-edge binary counters in 14-SOIC packages. Treat it as a cross-brand drop-in candidate rather than an automatic equivalence. Review both manufacturer datasheets for propagation delay, output-current limits, input leakage, reset behavior, supply-voltage limits, temperature range, and package dimensions before releasing it to production.
Where can I buy CD4024BMT online?
Use the Request a Quote form on this page to request CD4024BMT availability, current commercial terms, and lot-related information from XAIPART. Quote requests are the appropriate mechanism because market availability and commercial conditions can change independently of the device's technical lifecycle. Include your required quantity, target package suffix, acceptable date code, and production schedule so the request can be evaluated accurately.
What is the lead time for CD4024BMT?
The current CD4024BMT lead time should be requested through the Request a Quote form on this page. Lead time depends on the exact ordering suffix, order quantity, stock position, packaging format, and production schedule. The manufacturer product page is the authoritative source for the device family and ordering options, while XAIPART can confirm current commercial availability and timing for the requested configuration.
Is CD4024BMT in stock?
Current CD4024BMT stock status should be confirmed through the Request a Quote form on this page. Inventory can vary by exact suffix, package orientation, order quantity, and date code, so a general listing should not be treated as a guaranteed allocation. Include the required quantity and acceptable lot conditions in the request to obtain an actionable availability response.

Data referensi kejuruteraan untuk CD4024BMT — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the CD4024BMT when the design requires a seven-stage, negative-edge CMOS ripple counter with a 3 V to 18 V supply range and operation up to 24 MHz. It is particularly appropriate for new or maintained designs that specify the Texas Instruments CD4024B family. The CD4024BNSR is a same-brand option for procurement within the same 14-SOIC family, but its ordering suffix should be checked for grade and reel-format differences. Consider the onsemi CD4024BCM when a documented cross-brand 14-SOIC counter candidate is needed for supply continuity. The STMicroelectronics HCF4024M013TR is another same-package counter candidate, but clock-edge polarity and detailed timing limits should be confirmed. For every alternative, compare propagation delay, output current, input thresholds, reset and load behavior, temperature grade, and qualification requirements before release.

Perbandingan dengan Gantian

Parametr Produk Ini CD4024BNSR CD4024BCM HCF4024M013TR
Brand Texas Instruments Texas Instruments onsemi STMicroelectronics
Package 14-SOIC 14-SOIC 14-SOIC 14-SOIC
Counter Stages 7 stages 7 stages 7 bits 7-stage binary counter

Penyeberangsung Jelas

  • Maintains the established Texas Instruments CD4024B counter identity (vsCD4024BCM)
  • Provides seven binary stages for division ratios through 128 (vsHCF4024M013TR)
  • Uses the same 14-SOIC footprint as the documented cross-brand candidates (vsCD4024BCM)

Catatan Desain

The CD4024BMT counts on the negative clock edge, so the clock source must produce clean transitions with adequate rise and fall times. Route CLK away from Q outputs and other high-current switching nodes, use a compact ground-return path, and avoid stubs or test-point branches on the clock net. At high operating frequencies, probe the delivered clock at the device pin and compare it with the manufacturer timing requirements rather than relying only on the nominal 24 MHz maximum.

Place the supply-decoupling capacitor immediately between VDD and VSS, with its ground connection returned directly to the device ground plane. Keep the clock and control traces short, and place pull resistors where required for unused or high-impedance control inputs close to the associated pins. Because the counter uses ripple-carry stages, avoid feeding a Q output into a timing-critical path unless its transition delay has been included in the system timing budget.

Do not treat the seven Q outputs as changing simultaneously. A ripple counter advances its stages sequentially, so the interval between one output transition and the next can affect pulse width and setup time. Also define the state of the clock, master-reset, and parallel-load inputs during power-up and reset release. Unexpected transitions on the control inputs can initialize the count incorrectly or cause an unintended output sequence.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The device is a general-purpose CMOS logic IC rather than an automotive-qualified product, so AEC-Q100 is not applicable. Specific environmental-material declarations were not identified and remain unknown.

Pencarian Berhubungan

CD4024BMT datasheet CD4024BMT pinout CD4024BMT datasheet pdf CD4024BMT specifications CD4024BMT equivalent CD4024BMT replacement CD4024BMT cross reference CD4024BMT vs CD4024BCM CD4024BMT 14-SOIC footprint CD4024BMT frequency divider CD4024BMT price CD4024BMT stock Texas Instruments CD4024BMT CD4024BMT application circuit CD4024BMT 24MHz counter

Komponen dan Tanda berkaitan

Texas Instruments CD4024BMT CD4024BNSR CD4024BCM onsemi STMicroelectronics HCF4024M013TR CMOS binary counter counter and divider logic IC digital semiconductor 7-stage ripple-carry counter negative-edge clock parallel load master reset 14-SOIC SOIC package surface mount frequency division 3 V to 18 V supply 24 MHz maximum clock frequency binary state counter digital timing generator
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ