Texas Instruments

CD4521BPW - 24-Bit CMOS Frequency Divider | Texas Instruments

MPN: CD4521BPW ✓ Aktif
3 V to 18 V Vdss 20 V Id 16-pin TSSOP (PW) Package
MOQ: 1 |

CD4521BPW Ringkasan

The Texas Instruments CD4521BPW is a CMOS 24-stage frequency divider with one 24-bit counter element, negative-edge triggering, and a maximum count rate of 13 MHz. It operates from 3 V to 18 V and is packaged in a 16-pin thin shrink small-outline package (TSSOP, PW). The divider divides the input clock frequency by two at each of its 24 stages, supporting accurate frequency division for timing and clock-generation circuits.

A frequency divider is a clock-and-timing logic IC that converts an input clock into a lower-frequency output by counting clock cycles. The CD4521B belongs to the broader CMOS logic family and is designed for dependable operation across a broad supply range. Its staged divide-by-two architecture makes it useful when a circuit requires a stable divided clock while retaining a straightforward serial counter implementation.

The principal device characteristics include a 3 V to 18 V supply range, a 13 MHz count rate, one counter element, and a 24-bit counting capacity. According to the Texas Instruments CD4521B datasheet, the device is tested for 20 V quiescent current and includes 5 V, 10 V, and 15 V parametric ratings. Its standardized symmetrical output characteristics support predictable interfacing with other CMOS logic.

The CD4521B is designed in accordance with JEDEC Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices.” The CD4521BPW ordering option uses the 16-lead PW thin shrink small-outline package and is rated for operation from -55 °C to 125 °C. This combination of wide supply range, extended temperature capability, and division depth makes the device applicable beyond conventional laboratory and consumer clock circuits.

Typical uses include divide-by-two clock generation, instrumentation timing, digital frequency measurement, pulse-rate processing, and embedded systems that need a lower-frequency clock derived from a stable oscillator. In a two-terminal oscillator arrangement, the input clock can drive the counter while the final-stage output provides a divided waveform. Designers should observe the required reset behavior and ensure that timing margins remain adequate at the selected supply voltage and clock rate.

For PCB implementation, keep the clock path short and place any required bypass capacitors close to the supply and ground pins. Because the package has 16 leads, land-pattern and fanout errors can prevent reliable assembly. Review the Texas Instruments pin-description table and package drawing before assigning signal names or routing the board.

This product page combines the Texas Instruments datasheet specifications, exact ordering information, drop-in replacement assessment, package guidance, and application-oriented engineering notes to support faster component selection and board-design verification.

Pilihan pengganti yang segera untuk CD4521BPW — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera CD4521BPW (sama faktor bentuk dan kaki) — berbeza dalam Logic Family, Operating Temperature Range.

Texas Instruments
Logic Family: CD4000 CMOS
Operating Temperature Range: -55°C to +125°C
Bandingkan Dengan CD4521BPW →

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

CD4521BPW Spesifikasi

Product Type CMOS 24-stage frequency divider
Logic Family CD4521B CMOS
Counter Elements 1 element
Counter Length 24 bits
Division Ratio Divide-by-2 per stage
Counting Direction Down-counter
Trigger Type Negative edge
Maximum Count Rate 13 MHz
Supply Voltage Range 3 V to 18 V
Gambaran Suhu Operasi -55 °C to 125 °C
Kemasan 16-pin TSSOP (PW)
Package Family TSSOP thin shrink small-outline package
Kiraan Pin 16 pins
Qualification Standard JEDEC Standard No. 13B
Quiescent Current Test Voltage 20 V
Parametric Ratings 5 V, 10 V, and 15 V
Output Characteristics Standardized symmetrical output characteristics
Reset Type Asynchronous
RoHS Classification RoHS3

Panduan Konfigurasi Pin CD4521BPW tssop thin shrink small-outline package

Konfigurasi pin untuk CD4521BPW (tssop thin shrink small-outline package pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai tssop thin shrink small-outline package untuk CD4521BPW

Tiada data garisan pin yang diperoleh untuk CD4521BPW.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

CD4521BPW patut untuk 6 aplikasis: Divide-by-Two Clock Generation, Digital Frequency Measurement, Instrumentation Timing Reference, Pulse-Rate Processing, Embedded System Time Base, Power and Control Sequencing.

⚡

Divide-by-Two Clock Generation

The CD4521BPW suits clock-generation circuits that require a stable frequency divided from a higher-frequency source. Each counter stage divides the clock by two, so selecting an intermediate output provides a practical divide ratio without changing the input oscillator. Its specified 13 MHz maximum count rate and 3 V to 18 V supply range provide useful operating margin. The negative-edge trigger should be included in timing analysis, and the reset path must be initialized to the required state. Because each stage changes the transition period, use the selected output stage’s timing characteristics when setting downstream constraints.

📡

Digital Frequency Measurement

The CD4521BPW can divide a periodic input so downstream measurement logic receives a lower-frequency signal with a defined relationship to the source. The 24-bit counter length provides extensive division capability, while the 13 MHz count rate supports considerably faster inputs than many low-frequency timing circuits. In a measurement front end, preserve edge-to-edge timing margins and account for reset latency. Choose the counter stage that balances the required time-base interval against the maximum input frequency, then compare its period with the acquisition and processing timing of the measurement system.

🖥️

Instrumentation Timing Reference

The CD4521BPW is appropriate for instrumentation and test systems that derive a lower-rate timing signal from a higher-frequency oscillator. Its broad 3 V to 18 V operating range allows operation from multiple rail choices, and the -55 °C to 125 °C rating supports demanding environmental applications. The counter’s 24 stages permit flexible time-base selection. For low-jitter-sensitive instrumentation, route the oscillator and divider input with short traces, maintain a stable supply, and evaluate the selected output stage against the timing-accuracy requirement of the instrument.

🏭

Pulse-Rate Processing

The CD4521BPW can process repetitive pulse rates by converting a faster pulse train into a divided clock used for sampling, counting, or control updates. Negative-edge triggering defines the active transition, and the device’s 13 MHz count-rate specification supports inputs well above kilohertz pulse rates. Select the appropriate divider output to balance resolution against response time. Ensure that pulse amplitude and rise or fall times meet the electrical characteristics in the Texas Instruments CD4521B datasheet, and keep the reset and clock nets away from noisy switching nodes.

🧩

Embedded System Time Base

The CD4521BPW can supply a divided auxiliary clock in an embedded system when the main controller needs a simple, deterministic frequency relationship to another oscillator. The 24-stage divider architecture allows different division ratios to be selected from one input, while the 3 V to 18 V range simplifies interface planning across mixed supply domains. Check logic-level compatibility at the actual supply voltage, verify reset polarity in the circuit design, and avoid using the divider output as a substitute for a precision low-jitter time base when the application requires exceptionally accurate frequency stability.

🔧

Power and Control Sequencing

The CD4521BPW can divide a periodic control or synchronization signal to establish a slower cadence for supervisory logic, sampling intervals, or repeated state updates. Its extended 24-stage division range and negative-edge operation make the timing relationship explicit and repeatable. The supply range of 3 V to 18 V supports both low-voltage and higher-voltage industrial logic environments. In control systems, define a safe reset state, account for startup timing after reset release, and ensure that the divided cadence meets the control loop’s minimum update interval.

Ringkasan Produk Disebarkan

CD4521BPW Texas Instruments Dipergunakan di: Divide-by-Two Clock Generation, Digital Frequency Measurement, Instrumentation Timing Reference, Pulse-Rate Processing, Embedded System Time Base, Power and Control Sequencing CD4521BPWR Tape-and-reel ordering option Dipergunakan di: Divide-by-Two Clock Generation, Digital Frequency Measurement, Instrumentation Timing Reference, Pulse-Rate Processing, Embedded System Time Base, Power and Control Sequencing
What is the Texas Instruments CD4521BPW?
The Texas Instruments CD4521BPW is a CMOS 24-stage frequency divider containing one 24-bit counter with negative-edge triggering. According to the Texas Instruments CD4521B datasheet, it divides the input frequency by two at each stage, operates from 3 V to 18 V, supports count rates up to 13 MHz, and is offered in a 16-pin TSSOP package rated from -55 °C to 125 °C.
What is the operating voltage of CD4521BPW?
The CD4521BPW operates from 3 V to 18 V. The Texas Instruments CD4521B datasheet also identifies 5 V, 10 V, and 15 V parametric ratings, indicating that the device is characterized across several common supply levels. These ratings are important because switching speed and output behavior can vary with supply voltage; use the datasheet curves when establishing clock timing margins.
Where can I download the CD4521BPW datasheet PDF?
The official CD4521BPW datasheet is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/cd4521b.pdf. The document covers the CD4521B family, including the PW and PWR thin shrink small-outline package options, supply ratings, timing characteristics, and package information. Use the manufacturer’s pin-description table and package drawing when assigning the 16 device leads.
Where can I find the CD4521BPW pinout?
The CD4521BPW pinout is documented in the Texas Instruments CD4521B datasheet and the CD4521BPW ordering-information page. The part uses a 16-pin PW TSSOP package, so the PCB land pattern must contain 16 leads. Check the manufacturer’s pin-description table against the specific clock, reset, supply, and output connections before laying out the board.
What are the key specifications of CD4521BPW that engineers should know?
The key CD4521BPW specifications are a 3 V to 18 V supply range, one 24-bit counter element, divide-by-two operation at each of 24 stages, negative-edge triggering, and a maximum count rate of 13 MHz. The Texas Instruments CD4521B datasheet also specifies a -55 °C to 125 °C temperature range and JEDEC Standard No. 13B compatibility for the CD4521B CMOS family.
What can replace CD4521BPW without redesigning the PCB?
A true drop-in replacement for CD4521BPW must use the same 16-pin TSSOP footprint, preserve pin-to-pin signal assignments, and match the 3 V to 18 V supply and 13 MHz count-rate characteristics. The available cross-reference records primarily identify ordering and tape-and-reel variants of the same device rather than independent drop-in products. For that reason, validate the exact ordering suffix and complete datasheet before substituting a part.
Is CD4521BPW the same as CD4521BPWR?
The CD4521BPW and CD4521BPWR are ordering variants of the same Texas Instruments CD4521B 24-stage frequency-divider device and both use a 16-pin TSSOP package. The distinction is primarily how the device is supplied for handling: the PW ordering option is associated with tube packaging, while PWR denotes the tape-and-reel shipping option. Confirm the required packing format before procurement.
Where can I buy CD4521BPW and check current availability?
Use the Request a Quote form on this page to request CD4521BPW availability, current commercial terms, and a shipment quotation for the required quantity and packaging format. The manufacturer lists the CD4521B family as active, and CD4521BPW is identified as a 16-pin PW TSSOP orderable configuration. A quotation request is the appropriate way to confirm stock, lot traceability, and lead time.
What is the price of CD4521BPW?
Use the Request a Quote form on this page for the current CD4521BPW unit price, quantity-break terms, and total order value. Commercial pricing can vary with order quantity, package orientation, inventory, and delivery requirements. Submitting the desired quantity allows XAIPART to return an offer tied to the requested configuration rather than an outdated or incomplete price reference.
What is the lead time for CD4521BPW?
Request the current lead time for CD4521BPW through the Request a Quote form on this page, including your required quantity, tube or reel packaging preference, shipment destination, and target schedule. The Texas Instruments product page identifies CD4521BPW as an active orderable configuration, but a project-specific lead-time commitment depends on order quantity, component availability, and fulfillment conditions.
Is CD4521BPW in stock?
Submit a stock request through the Request a Quote form on this page to obtain current CD4521BPW availability for the required quantity. The component is listed as active by Texas Instruments, with the PW configuration specified as a 16-pin TSSOP device. Because inventory changes continuously, confirm allocation and delivery timing when placing the order rather than relying on a static listing.
When should I choose CD4521BPW over a CD74HC-based divider?
Choose the CD4521BPW when the design benefits from a CMOS frequency divider with 24 stages, a 3 V to 18 V supply range, and a maximum count rate of 13 MHz. A CD74HC-based counter may be considered when operating from a narrower regulated supply or when a different counting architecture is preferred. Verify thresholds, timing, reset behavior, and pin compatibility rather than treating the families as interchangeable.
Is CD4521BPW suitable for industrial timing and instrumentation?
The CD4521BPW is suitable for timing systems that operate within its specified electrical and environmental limits. Its 3 V to 18 V supply range, 13 MHz count rate, and -55 °C to 125 °C rated temperature range provide broad design flexibility. The Texas Instruments CD4521B datasheet confirms JEDEC Standard No. 13B alignment, while the final industrial suitability depends on the complete system environment.
Can CD4521BPW be used as a divide-by-two clock generator?
Yes, the CD4521BPW can implement a divide-by-two output by taking the clock from the appropriate stage of its 24-stage divider chain. The device triggers on the negative edge and is specified for operation up to 13 MHz. Confirm the exact stage-output pin assignments, reset state, and timing requirements in the Texas Instruments pin-description table before constructing the circuit.
What is the best cross-brand equivalent for CD4521BPW?
The best cross-brand equivalent for CD4521BPW must be selected from a documented 16-pin TSSOP device with the same counter length, negative-edge behavior, reset arrangement, 3 V to 18 V supply capability, and adequate count rate. The available cross-reference material does not identify a verified independent substitute. Treat any candidate as a redesign candidate until its manufacturer confirms pin compatibility and timing equivalence.

Data referensi kejuruteraan untuk CD4521BPW — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the CD4521BPW when the design requires a CMOS 24-stage divide-by-two frequency divider in a 16-pin TSSOP package. Its 3 V to 18 V supply range, 13 MHz maximum count rate, negative-edge triggering, and -55 °C to 125 °C temperature rating make it suitable for industrial timing, instrumentation, pulse-rate processing, and auxiliary clock-generation systems. Select the divider stage that provides the required frequency division and then include its propagation delay in the system timing budget. Verify reset behavior, package pin assignments, input edge requirements, and the required tube or reel ordering format before releasing the PCB or purchase order. If the application requires exceptionally low jitter, a modern clocking IC with a lower-noise reference may be more appropriate even though the CD4521BPW offers a simple and widely understood divider architecture.

Catatan Desain

Use the manufacturer’s 16-pin PW package drawing and pin-description table to construct the PCB footprint. Place the clock input and any reset components close to their associated pins, keep the clock trace short, and route it away from switching-regulator and digital-output traces. The CD4521BPW uses a fine-pitch TSSOP package, so inspect solder paste, component placement, and reflow profiles carefully to avoid bridging or insufficient solder.

Account for negative-edge triggering when defining the timing relationship between the input clock and any selected divider output. Review the CD4521B datasheet’s propagation-delay, transition-time, and maximum-count-rate characteristics at the intended supply voltage. Rising and falling edges must meet the input requirements, and the delay from clock edge to divider output must be included in control or acquisition budgets.

Do not treat CD4521BPW and CD4521BPWR as different electrical devices without checking the ordering codes. Both refer to the same 16-pin TSSOP CD4521B frequency divider, with the suffix principally distinguishing the supplied packing format. Confirm whether the assembly process requires a tube or reel configuration. Also verify reset polarity, selected-stage output assignment, and supply voltage before fabrication; these details determine correct startup and timing behavior.

Maklumat Kesediaan

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The distributor product summary identifies the CD4521BPW as RoHS3. The Texas Instruments CD4521B datasheet states compliance with JEDEC Standard No. 13B. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

CD4521BPW datasheet CD4521BPW pinout CD4521BPW datasheet pdf CD4521BPW equivalent CD4521BPW replacement CD4521BPW cross reference CD4521BPW TSSOP-16 pinout CD4521BPW 24-stage frequency divider CD4521BPW 3V 18V 13MHz CD4521BPW vs CD4521BPWR Texas Instruments CD4521BPW CD4521BPW price CD4521BPW stock CD4521BPW clock divider application CD4521BPW footprint

Komponen dan Tanda berkaitan

Texas Instruments CD4521BPW CD4521BPWR CD4521B CMOS frequency divider counter IC 24-stage divider divide-by-2 negative-edge trigger clock and timing logic TSSOP 16-pin TSSOP surface-mount package JEDEC Standard No. 13B RoHS 3 V to 18 V supply voltage 13 MHz count rate asynchronous reset instrumentation timing pulse-rate processing embedded system time base
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ