CD4521BPW - 24-Bit CMOS Frequency Divider | Texas Instruments
MPN: CD4521BPW ✓ AktifCD4521BPW Genel Bakış
A frequency divider is a clock-and-timing logic IC that converts an input clock into a lower-frequency output by counting clock cycles. The CD4521B belongs to the broader CMOS logic family and is designed for dependable operation across a broad supply range. Its staged divide-by-two architecture makes it useful when a circuit requires a stable divided clock while retaining a straightforward serial counter implementation.
The principal device characteristics include a 3 V to 18 V supply range, a 13 MHz count rate, one counter element, and a 24-bit counting capacity. According to the Texas Instruments CD4521B datasheet, the device is tested for 20 V quiescent current and includes 5 V, 10 V, and 15 V parametric ratings. Its standardized symmetrical output characteristics support predictable interfacing with other CMOS logic.
The CD4521B is designed in accordance with JEDEC Standard No. 13B, “Standard Specifications for Description of ‘B’ Series CMOS Devices.” The CD4521BPW ordering option uses the 16-lead PW thin shrink small-outline package and is rated for operation from -55 °C to 125 °C. This combination of wide supply range, extended temperature capability, and division depth makes the device applicable beyond conventional laboratory and consumer clock circuits.
Typical uses include divide-by-two clock generation, instrumentation timing, digital frequency measurement, pulse-rate processing, and embedded systems that need a lower-frequency clock derived from a stable oscillator. In a two-terminal oscillator arrangement, the input clock can drive the counter while the final-stage output provides a divided waveform. Designers should observe the required reset behavior and ensure that timing margins remain adequate at the selected supply voltage and clock rate.
For PCB implementation, keep the clock path short and place any required bypass capacitors close to the supply and ground pins. Because the package has 16 leads, land-pattern and fanout errors can prevent reliable assembly. Review the Texas Instruments pin-description table and package drawing before assigning signal names or routing the board.
This product page combines the Texas Instruments datasheet specifications, exact ordering information, drop-in replacement assessment, package guidance, and application-oriented engineering notes to support faster component selection and board-design verification.
Drop-in alternatifler için CD4521BPW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller CD4521BPW (aynı form faktörü ve ayağa oturma) — farklı olan Logic Family, Operating Temperature Range.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinCD4521BPW Özellikler
| Product Type | CMOS 24-stage frequency divider |
| Logic Family | CD4521B CMOS |
| Counter Elements | 1 element |
| Counter Length | 24 bits |
| Division Ratio | Divide-by-2 per stage |
| Counting Direction | Down-counter |
| Trigger Type | Negative edge |
| Maximum Count Rate | 13 MHz |
| Supply Voltage Range | 3 V to 18 V |
| İşletim Sıcaklığı Aralığı | -55 °C to 125 °C |
| Paket | 16-pin TSSOP (PW) |
| Package Family | TSSOP thin shrink small-outline package |
| Pin Sayısı | 16 pins |
| Qualification Standard | JEDEC Standard No. 13B |
| Quiescent Current Test Voltage | 20 V |
| Parametric Ratings | 5 V, 10 V, and 15 V |
| Output Characteristics | Standardized symmetrical output characteristics |
| Reset Type | Asynchronous |
| RoHS Classification | RoHS3 |
CD4521BPW tssop thin shrink small-outline package Pin Yapısı Kılavuzu
CD4521BPW (tssop thin shrink small-outline package paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: CD4521BPW.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
CD4521BPW için uygundur 6 uygulamas: Divide-by-Two Clock Generation, Digital Frequency Measurement, Instrumentation Timing Reference, Pulse-Rate Processing, Embedded System Time Base, Power and Control Sequencing.
Divide-by-Two Clock Generation
The CD4521BPW suits clock-generation circuits that require a stable frequency divided from a higher-frequency source. Each counter stage divides the clock by two, so selecting an intermediate output provides a practical divide ratio without changing the input oscillator. Its specified 13 MHz maximum count rate and 3 V to 18 V supply range provide useful operating margin. The negative-edge trigger should be included in timing analysis, and the reset path must be initialized to the required state. Because each stage changes the transition period, use the selected output stage’s timing characteristics when setting downstream constraints.
Önerilen
Digital Frequency Measurement
The CD4521BPW can divide a periodic input so downstream measurement logic receives a lower-frequency signal with a defined relationship to the source. The 24-bit counter length provides extensive division capability, while the 13 MHz count rate supports considerably faster inputs than many low-frequency timing circuits. In a measurement front end, preserve edge-to-edge timing margins and account for reset latency. Choose the counter stage that balances the required time-base interval against the maximum input frequency, then compare its period with the acquisition and processing timing of the measurement system.
Önerilen
Instrumentation Timing Reference
The CD4521BPW is appropriate for instrumentation and test systems that derive a lower-rate timing signal from a higher-frequency oscillator. Its broad 3 V to 18 V operating range allows operation from multiple rail choices, and the -55 °C to 125 °C rating supports demanding environmental applications. The counter’s 24 stages permit flexible time-base selection. For low-jitter-sensitive instrumentation, route the oscillator and divider input with short traces, maintain a stable supply, and evaluate the selected output stage against the timing-accuracy requirement of the instrument.
Önerilen
Pulse-Rate Processing
The CD4521BPW can process repetitive pulse rates by converting a faster pulse train into a divided clock used for sampling, counting, or control updates. Negative-edge triggering defines the active transition, and the device’s 13 MHz count-rate specification supports inputs well above kilohertz pulse rates. Select the appropriate divider output to balance resolution against response time. Ensure that pulse amplitude and rise or fall times meet the electrical characteristics in the Texas Instruments CD4521B datasheet, and keep the reset and clock nets away from noisy switching nodes.
Önerilen
Embedded System Time Base
The CD4521BPW can supply a divided auxiliary clock in an embedded system when the main controller needs a simple, deterministic frequency relationship to another oscillator. The 24-stage divider architecture allows different division ratios to be selected from one input, while the 3 V to 18 V range simplifies interface planning across mixed supply domains. Check logic-level compatibility at the actual supply voltage, verify reset polarity in the circuit design, and avoid using the divider output as a substitute for a precision low-jitter time base when the application requires exceptionally accurate frequency stability.
Önerilen
Power and Control Sequencing
The CD4521BPW can divide a periodic control or synchronization signal to establish a slower cadence for supervisory logic, sampling intervals, or repeated state updates. Its extended 24-stage division range and negative-edge operation make the timing relationship explicit and repeatable. The supply range of 3 V to 18 V supports both low-voltage and higher-voltage industrial logic environments. In control systems, define a safe reset state, account for startup timing after reset release, and ensure that the divided cadence meets the control loop’s minimum update interval.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: CD4521BPW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Tasarım Notları
Use the manufacturer’s 16-pin PW package drawing and pin-description table to construct the PCB footprint. Place the clock input and any reset components close to their associated pins, keep the clock trace short, and route it away from switching-regulator and digital-output traces. The CD4521BPW uses a fine-pitch TSSOP package, so inspect solder paste, component placement, and reflow profiles carefully to avoid bridging or insufficient solder.
Account for negative-edge triggering when defining the timing relationship between the input clock and any selected divider output. Review the CD4521B datasheet’s propagation-delay, transition-time, and maximum-count-rate characteristics at the intended supply voltage. Rising and falling edges must meet the input requirements, and the delay from clock edge to divider output must be included in control or acquisition budgets.
Do not treat CD4521BPW and CD4521BPWR as different electrical devices without checking the ordering codes. Both refer to the same 16-pin TSSOP CD4521B frequency divider, with the suffix principally distinguishing the supplied packing format. Confirm whether the assembly process requires a tube or reel configuration. Also verify reset polarity, selected-stage output assignment, and supply voltage before fabrication; these details determine correct startup and timing behavior.
Uyumluluk Bilgisi
The distributor product summary identifies the CD4521BPW as RoHS3. The Texas Instruments CD4521B datasheet states compliance with JEDEC Standard No. 13B. No separate REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified.