CS8130-CS - Multi-Standard IR Transceiver 115kbps | Cirrus Logic
MPN: CS8130-CS ✗ Akhir HayatCS8130-CS Ringkasan
An infrared transceiver is an optoelectronic interface IC that combines an infrared emitter driver and a photodiode receiver in one device, converting between electrical serial data and modulated IR light. It sits at the top of a hierarchy running from transceiver IC, to interface IC, to mixed-signal semiconductor, and it forms the physical layer of wireless short-range links such as those defined by the IrDA (Infrared Data Association) standard.
Key features include an on-chip high-gain PIN diode receiver amplifier that removes the need for an external preamplifier, and an integrated decoder compatible with IrDA, HP-SIR (Hewlett-Packard Serial Infrared), 500 kHz Amplitude Shift Keying (ASK), and TV remote control protocols. The receive channel also contains a data pulse stretcher, which widens narrow received pulses so standard UARTs can reliably sample them.
Architecturally, the CS8130 integrates the full optical front end and protocol decoding on a single die. The high-gain PIN amplifier directly drives the demodulator chain, improving noise immunity over discrete photodiode-plus-op-amp designs. Because all four major IR modulation standards are decoded on-chip, a single design can communicate with PDAs, printers, laptops, and consumer remote controls without hardware changes.
Typical applications include IrDA serial ports on embedded systems and industrial equipment, short-range wireless data exchange between handheld instruments, IR remote-control repeaters and extenders, and set-top box or appliance front panels that must accept both data links and TV remote commands.
A key design consideration is that the 2.7V to 5.5V supply range allows direct operation from a 3.0V or 5.0V rail, but the transmit LED drive current setting and optical alignment must follow the manufacturer datasheet guidance to achieve the specified link distance.
This page adds value beyond the datasheet by synthesizing distributor availability, drop-in replacement strategy for this discontinued part, and practical design notes in one place.
Pilihan pengganti yang segera untuk CS8130-CS — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
CS8130-CSZ
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CS8130-CS Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Multi-Standard Infrared Transceiver |
| Kadar Data | 115.2 kbps |
| Supply Voltage Range | 2.7 V to 5.5 V |
| Supported IR Standards | IrDA, HP-SIR, 500 kHz ASK, TV Remote |
| Receiver Amplifier | On-chip high-gain PIN diode amplifier |
| Decoder | IrDA / HP-SIR / ASK / TV remote compatible |
| Data Pulse Stretcher | On-chip |
| Kemasan | SSOP-20 |
| Package Dimensions | 5.30 mm x 6.40 mm |
| Jenis Pemasangan | Surface Mount |
| Suhu Operasi | 0C to +70C |
| Logic Family Compatibility | CMOS/TTL digital input levels (logic 0 = 0V, logic 1 = V+) |
Panduan Konfigurasi Pin CS8130-CS 5.30 mm x 6.40 mm
Konfigurasi pin untuk CS8130-CS (5.30 mm x 6.40 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CS8130-CS.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CS8130-CS patut untuk 6 aplikasis: IrDA Serial Port on Embedded Systems, Handheld Instrument Data Exchange, IR Remote Control Receivers and Repeaters, Set-Top Box and Appliance Front Panels, Industrial Equipment Configuration Ports, Legacy Production Repair and Sustaining Engineering.
IrDA Serial Port on Embedded Systems
The CS8130-CS serves as a complete IrDA SIR physical layer for embedded boards that need a cable-free serial port. Its 115.2 kbps maximum data rate matches the IrDA SIR maximum, and the on-chip data pulse stretcher widens received pulses so a standard UART can sample them directly, eliminating external timing logic. The 2.7V to 5.5V supply range connects directly to 3.3V or 5V microcontroller rails, including popular 8051, ARM, and PIC families. In the circuit, the transceiver sits between the microcontroller UART TXD/RXD pins and the IR window, with the transmit LED and current-setting resistor per the datasheet application circuit. Because IrDA decoding happens on-chip, firmware only handles plain byte streams, and the same PCB design communicates with laptops, printers, and PDAs without protocol changes.
Disebarkan
Handheld Instrument Data Exchange
Portable test instruments, meters, and data loggers use the CS8130-CS to offload logged data to a laptop or PDA over a short IR link. The high-gain on-chip PIN diode amplifier removes the need for a discrete photodiode preamplifier stage, saving board area and quiescent budget in battery-powered enclosures, while the integrated multi-standard decoder accepts IrDA or HP-SIR framing from the host device. The SSOP-20 package (5.30 mm x 6.40 mm footprint) fits behind a small IR window on a handheld enclosure face. Operation from a single 2.7V to 5.5V rail means the transceiver can share the instrument's existing logic supply. Designers should place the device close to the enclosure window and follow the datasheet LED drive recommendations to achieve the specified link distance at 115.2 kbps.
Disebarkan
IR Remote Control Receivers and Repeaters
Because the CS8130-CS decoder is TV remote compatible and handles 500 kHz ASK modulation, one chip can implement remote-control reception, IR repeaters, and extenders. In a repeater, the receive chain demodulates the incoming carrier from a handheld remote and the transmit driver re-emits it toward equipment hidden inside a cabinet. The on-chip PIN amplifier provides the gain a discrete carrier-detection receiver would otherwise need, improving noise immunity in electrically noisy entertainment or appliance environments. The 0C to +70C rating covers indoor consumer and light-industrial conditions. Designers select the remote mode via the datasheet mode-selection logic and keep the transmit LED current-setting components close to the device. The single-chip approach reduces bill-of-material count versus separate receiver and driver ICs.
Disebarkan
Set-Top Box and Appliance Front Panels
Set-top boxes, white-goods controllers, and HVAC panels benefit from the CS8130-CS dual role: it accepts TV remote commands for user control while supporting an IrDA data link for service diagnostics and firmware setup. The multi-standard decoder (IrDA, HP-SIR, 500 kHz ASK, TV remote) means the manufacturer can serve both functions from one component and one IR window, cutting cost and panel complexity. Its 2.7V to 5.5V supply range matches typical 5V appliance logic, and the SSOP-20 surface-mount package suits automated assembly. During manufacturing test, an IR probe can read status through the same window. Designers should follow the datasheet decoupling guidance on the V+ pin to keep the high-gain receive amplifier stable in the presence of switching loads elsewhere on the board.
Disebarkan
Industrial Equipment Configuration Ports
Industrial drives, gateways, and controllers use the CS8130-CS as a sealed configuration port: technicians commission or read diagnostics through an IR window without opening the enclosure or exposing connectors to dust and moisture. The 115.2 kbps rate is sufficient for parameter files and log dumps, and the pulse stretcher guarantees reliable UART sampling of IrDA data. Because the decoder also handles HP-SIR and ASK, legacy service tools continue to work with new hardware. The 0C to +70C commercial rating fits control-room and panel environments; for extended-temperature cabinets, thermal derating should be checked against the datasheet. Place the IC close to the panel window and use the datasheet application circuit for the LED drive to maintain link margin across the enclosure wall thickness.
Disebarkan
Legacy Production Repair and Sustaining Engineering
Many shipped products still specify the CS8130-CS in their bills of material, and sustaining engineers need the exact part for board repairs and low-volume production of legacy lines. The CS8130-CSZ (identical die, lead-free finish, same SSOP-20 footprint) is the preferred drop-in where RoHS compliance permits, while original CS-finish lots serve exact historical replacements. Because the device is discontinued, procurement should consolidate requirements and request quotes early to secure remaining stock before it is exhausted. Design teams planning long-term availability should qualify a modern IrDA transceiver footprint as a parallel redesign path while continuing to repair installed base boards with authentic CS8130-family parts rather than unverified substitutes.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CS8130-CS — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CS8130-CSZ |
|---|---|---|
| Package | SSOP-20 | SSOP-20 - same |
| Brand | Cirrus Logic | Cirrus Logic |
| Data Rate | 115.2 kbps | 115.2 kbps |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V |
| Supported IR Standards | IrDA, HP-SIR, 500 kHz ASK, TV Remote | IrDA, HP-SIR, 500 kHz ASK, TV Remote |
| Operating Temperature | 0C to +70C | 0C to +70C |
| Lifecycle Status | Obsolete (remaining stock) | Obsolete (remaining stock) |
Penyeberangsung Jelas
- Four IR standards decoded on-chip (vsCS8130-CSZ)
- Integrated PIN diode amplifier (vsCS8130-CSZ)
- Wide single-supply range for legacy logic (vsCS8130-CSZ)
Catatan Desain
Decouple the V+ pin with a ceramic capacitor placed within a few millimeters of pin 1 as close as the SSOP-20 footprint allows, per the manufacturer datasheet power supply recommendations. The receive channel contains a high-gain PIN diode amplifier, so a shared, noisy supply rail can inject ripple directly into the receiver front end and corrupt demodulation of weak 500 kHz ASK carriers. Use a solid ground plane under the transceiver and keep switching loads (LED indicators, relays, switching regulators) away from the IR receiver window and its traces.
The CS8130-CS integrates the data pulse stretcher specifically so a standard UART can sample received IrDA pulses. Do not add external pulse-shaping or retrigger circuits between the transceiver output and the microcontroller UART; they can double-count stretched pulses and cause framing errors. Route the serial data line short and, on boards with long runs to the MCU, keep it away from transmit LED drive loops, whose fast current edges couple into the receive path. Verify mode selection logic (IrDA vs HP-SIR vs ASK) is driven from static MCU GPIOs, not from pins that float during reset.
The CS8130-CS is rated 0C to +70C; do not specify it for outdoor or extended-temperature industrial cabinets without derating analysis, and do not substitute generic database 'equivalents' (for example power-management ICs that aggregator sites list under this part number) - they are unrelated silicon in different packages. Obsolete-part lots also carry counterfeit risk: purchase only from inspected, traceable stock and confirm date codes and pin-1 marking against the manufacturer datasheet before assembly. Keep transmit LED drive components exactly per the datasheet application circuit to preserve rated link distance.
Maklumat Kesediaan
The CS (standard finish) suffix predates lead-free conversions; the CSZ suffix denotes the lead-free finish variant. Consult the manufacturer product page or request confirmation when ordering for compliance-sensitive builds.