Renesas Electronics

CS82C84AZ - 25MHz CMOS Clock Generator | Renesas

MPN: CS82C84AZ ✓ Aktif
5 V Vdss 20-LCC (J-Lead) Package 25 MHz Speed
MOQ: 1 |

CS82C84AZ Ringkasan

The Renesas Electronics CS82C84AZ is a CMOS clock generator-driver designed for 8086, 8088, 80C86, and 80C88 microprocessor systems. It operates from a 5 V supply, provides a single clock output, and supports operation up to 25 MHz in a 20-LCC J-lead package. The device integrates crystal-controlled oscillator, clock-generation, synchronization, and reset-support functions for legacy microprocessor platforms.

A clock generator-driver is a clock and timing IC that converts a stable frequency reference into the processor clock and coordinates associated synchronous control signals. Within the broader clock and timing hierarchy, the CS82C84AZ belongs to the clock-generator-driver class, supporting the clock and timing requirements of older CMOS and NMOS microprocessor systems. Its principal engineering value is integration: a clock source, divider, driver, and Ready synchronization logic are combined in one package.

The primary operating specifications are a 25 MHz maximum clock frequency, one clock channel, a 5 V supply, and a 20-LCC J-lead package. The manufacturer datasheet identifies the circuit as a high-performance CMOS clock generator-driver intended to service both CMOS and NMOS microprocessors. These characteristics make it relevant to industrial control, embedded legacy processor, test-equipment, and equipment-maintenance designs that retain 8086-family processors.

The CS82C84AZ architecture contains a crystal-controlled oscillator, a divide-by-three counter, clock-driver circuitry, and complete Ready synchronization and reset logic. The clock output is intended for the clock requirements of compatible 8086-family systems, while the synchronization section coordinates the processor's Ready input with system timing events. Designers should review the timing diagrams before selecting oscillator components or clock-divider settings for a specific processor operating mode.

Typical applications include legacy 8086 and 8088 embedded controllers, 80C86 and 80C88 CMOS processor modules, industrial terminal controllers, programmable logic test fixtures, and repair or obsolescence-management programs for vintage x86-compatible equipment. In these systems, the CS82C84AZ serves as the central timing component rather than the processor itself, generating the operating clock and supporting the associated synchronization sequence.

The primary design consideration is package and timing compatibility. The CS82C84AZ uses a 20-LCC J-lead package, so board layout, pin numbering, crystal connection, reset sequencing, and READY timing must match the manufacturer pin description. Decoupling capacitors should be placed close to the supply pins, while crystal and oscillator routing should avoid switching-node and high-current return paths to reduce timing disturbance.

This product overview combines the manufacturer function description with practical system-level guidance, including legacy processor use cases, package constraints, and engineering checks for clock, reset, and synchronization implementation.

Pilihan pengganti yang segera untuk CS82C84AZ — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

CS82C84AZ96

✅ Masuk Drop-In
📦 20-LCC (J-Lead)
Same 25 MHz clock-generator rating and 20-pin PLCC package; 0 MHz frequency difference and 0 output-count difference are identified

📋 Alternatif rujukan (tidak dalam katalog)

CP82C84AZ

✅ Masuk Drop-In
📦 20-LCC (J-Lead)
Same 82C84A clock-generator family and 25 MHz-class timing function; 0 MHz stated frequency difference and 0 output-count difference

📋 Alternatif rujukan (tidak dalam katalog)

84068012A

✅ Masuk Drop-In
📦 20-LCC (J-Lead)
Same legacy 82C84A replacement category and 25 MHz-class clock function; 0 MHz stated frequency difference and 0 output-count difference

📋 Alternatif rujukan (tidak dalam katalog)

CS82C84AZ Spesifikasi

Product Type CMOS clock generator-driver
Frekuensi Klock Maksimum 25 MHz
Number of Clock Outputs 1
Tegangan Pemberi Arus 5 V
Supported Processor Families 80C86, 80C88, 8086, and 8088
Process Technology CMOS
Oscillator Type Crystal-controlled oscillator
Internal Divider Divide-by-3 counter
Synchronization Logic Ready synchronization and reset logic
Kemasan 20-LCC (J-Lead)
Kiraan Pin 20 pins
Jenis Pemasangan Through-hole

Panduan Konfigurasi Pin CS82C84AZ 20-lcc (j-lead)

Konfigurasi pin untuk CS82C84AZ (20-lcc (j-lead) pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 20-lcc (j-lead) untuk CS82C84AZ

Tiada data garisan pin yang diperoleh untuk CS82C84AZ.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

CS82C84AZ patut untuk 6 aplikasis: 8086 Embedded Processor Controller, 8088 Bus-Based Control System, 80C86 CMOS Processor Module, 80C88 Processor Timing Card, Legacy Test Fixture, Obsolete Equipment Repair.

⚡

8086 Embedded Processor Controller

The CS82C84AZ fits an 8086-based embedded controller because the manufacturer identifies the 8086 as a supported processor family. Its 25 MHz clock capability, 5 V supply, crystal-controlled oscillator, and divide-by-three counter provide the central clock reference required by a compatible processor board. The integrated Ready synchronization and reset logic also supports coordinated system startup rather than requiring separate clock and handshake circuitry. For an existing design, verify oscillator values, clock edge requirements, READY timing, and package pin assignments in the manufacturer timing diagrams before committing the layout.

🏭

8088 Bus-Based Control System

The CS82C84AZ is appropriate for an 8088 bus-based control system that requires a central processor clock and coordinated Ready signaling. Its single 25 MHz-class clock output and integrated reset and synchronization functions suit a legacy control architecture, while the 5 V operating requirement matches conventional 8088-era system rails. Because the device also includes a divide-by-three counter, designers must determine whether the target clock source and processor operating mode require division. Review crystal loading, startup behavior, and READY transition timing against the manufacturer circuit and timing diagrams.

🔧

80C86 CMOS Processor Module

The CS82C84AZ is suitable for a 80C86 CMOS processor module because the manufacturer specifically identifies the 80C86 as a supported family. Its CMOS implementation, 5 V supply, and 25 MHz maximum clock rating provide a conventional timing solution for systems retaining the 80C86 architecture. Integrated Ready synchronization allows the processor handshake to be coordinated with the system clock, while reset logic supports repeatable initialization. The implementation must still match the processor's clock period, reset polarity, synchronization requirements, and exact 20-LCC footprint on the assembled board.

🖥️

80C88 Processor Timing Card

The CS82C84AZ can serve as the clock and timing device in an 80C88 processor card or modular legacy controller. The 80C88 is explicitly named by the manufacturer as a supported processor, and the device's 25 MHz capability and integrated Ready/reset functions provide the timing infrastructure required by an 8088-family design. Placement in a separate timing card is especially useful when restoring older equipment or separating oscillator routing from high-current processor buses. Confirm the 20-LCC J-lead footprint, pin numbering, clock edge, oscillator network, and reset sequence before fabrication.

🔧

Legacy Test Fixture

The CS82C84AZ is useful in a legacy processor test fixture that must reproduce the clock, reset, and Ready timing expected by an 8086-family device. Its single 25 MHz-class clock output and integrated synchronization logic allow a fixture to provide a controlled timing environment without duplicating every timing function externally. This application also benefits from the device's established 20-LCC J-lead package, which can simplify repairs in older fixture hardware. The fixture designer should measure startup, clock waveform, READY response, and reset timing using the manufacturer timing diagrams as the acceptance reference.

🧩

Obsolete Equipment Repair

The CS82C84AZ is suitable for repairing or extending vintage equipment built around an 8086, 8088, 80C86, or 80C88 processor. Retaining the original clock-generator function minimizes changes to board routing, oscillator networks, reset sequencing, and READY handshakes. The 20-LCC J-lead package and 25 MHz operating limit make it particularly relevant to service inventory for established platforms. Before installation, compare every lead position against the board schematic and manufacturer pinout, then verify clock frequency and timing after repair to avoid introducing a processor-bus synchronization fault.

Ringkasan Produk Disebarkan

8086 Supported microprocessor family Dipergunakan di: 8086 Embedded Processor Controller, 8088 Bus-Based Control System, Legacy Test Fixture, Obsolete Equipment Repair 8088 Related supported microprocessor family Dipergunakan di: 8086 Embedded Processor Controller, 8088 Bus-Based Control System, Legacy Test Fixture 80C86 Supported CMOS microprocessor family Dipergunakan di: 80C86 CMOS Processor Module, 80C88 Processor Timing Card, Obsolete Equipment Repair 80C88 Related supported CMOS microprocessor family Dipergunakan di: 80C86 CMOS Processor Module, 80C88 Processor Timing Card
What is the CS82C84AZ?
The CS82C84AZ is a CMOS clock generator-driver designed for 8086, 8088, 80C86, and 80C88 microprocessor systems. According to the manufacturer datasheet, it combines a crystal-controlled oscillator, divide-by-three counter, clock-driver circuitry, Ready synchronization, and reset logic. The device operates from 5 V, supports up to 25 MHz, provides one clock output, and is packaged in a 20-LCC J-lead configuration.
What are the key specifications of CS82C84AZ?
The CS82C84AZ is specified as a 25 MHz, single-output CMOS clock generator-driver operating from 5 V in a 20-LCC J-lead package. The manufacturer datasheet identifies a crystal-controlled oscillator and divide-by-three counter within the timing architecture. Its integrated Ready synchronization and reset logic distinguish it from a simple oscillator, making the device suitable for compatible 8086-family clock and control arrangements.
Where can I download the CS82C84AZ datasheet PDF?
The CS82C84AZ datasheet PDF can be accessed through the direct document link on this page. The document identifies the device as a CMOS clock generator-driver for 80C86, 80C88, 8086, and 8088 processors and describes the crystal oscillator, divide-by-three counter, Ready synchronization, and reset logic. Use the manufacturer pin-description and timing diagrams when assigning PCB connections.
Where can I find the CS82C84AZ pinout?
The CS82C84AZ pin assignment is defined in the manufacturer pin-description table and package drawing. The component uses a 20-LCC J-lead package, so its lead numbering and physical orientation must be matched to the board footprint. Before assembly, verify oscillator, clock, reset, and Ready-related connections against the package drawing and timing diagrams, especially when replacing an equivalent legacy clock generator.
Is CS82C84AZ suitable for 8086 and 8088 systems?
Yes, the CS82C84AZ is specifically intended to service 8086 and 8088 microprocessor clock requirements. The manufacturer datasheet also identifies compatibility with the CMOS 80C86 and 80C88 families. Suitability still depends on matching the processor's required clock frequency, oscillator arrangement, reset sequence, Ready timing, and supply voltage to the device specifications.
What can replace the CS82C84AZ?
The closest documented replacement candidates are the CS82C84AZ96, CP82C84AZ, and 84068012A. Each is associated with the same 82C84A clock-generator function and a 25 MHz-class device category, but a replacement should be accepted only after its exact package, lead numbering, oscillator arrangement, timing characteristics, and READY/reset behavior are checked against the original schematic. Confirm the final cross-reference with the manufacturer before production use.
Is CS82C84AZ the same as CS82C84AZ96?
The CS82C84AZ96 is a closely related 82C84A clock-generator-device listing associated with the CS82C84AZ family. Both are identified as 20-pin PLCC clock-generator devices and are commonly compared as alternatives. The suffix can denote a distinct ordering or packaging form, so engineers should confirm the package drawing, temperature grade, clock timing, and procurement status before treating it as a production drop-in replacement.
What is the best Intersil equivalent for CS82C84AZ?
The CP82C84AZ is the most directly documented Intersil-family candidate for the CS82C84AZ because comparison records place the two parts in the same 82C84A clock-generator category. For a true drop-in decision, verify that the replacement uses the same 20-LCC J-lead footprint, preserves pin numbering, and provides equivalent oscillator, clock, reset, and Ready timing. A functional resemblance alone is not sufficient for PCB reuse.
When should I choose CS82C84AZ over a replacement?
Choose the CS82C84AZ when maintaining an existing 8086-family platform where the exact 20-LCC J-lead footprint, clock frequency, oscillator implementation, reset timing, and Ready synchronization are already validated. A candidate replacement is preferable when it provides documented pin-for-pin equivalence and lifecycle continuity, but it adds migration risk unless its timing and package details are verified against the original design.
CS82C84AZ vs CP82C84AZ - which is better for a legacy processor board?
The CS82C84AZ is preferable when its documented 25 MHz rating, 5 V operation, 20-LCC J-lead package, and integrated reset and Ready logic match the original board. The CP82C84AZ may suit a replacement program when exact compatibility can be documented. Neither device should be selected solely from the 82C84A family name; oscillator pins, clock-output timing, synchronization behavior, and package orientation determine whether the board can remain unchanged.
Where can I buy CS82C84AZ online?
Use the Request a Quote form on this page to ask about CS82C84AZ availability, order quantity, and delivery terms for the 20-LCC J-Lead package. The form is the appropriate channel for a quote because inventory and lead time can change. Include the target quantity, permissible manufacturer packaging, and whether obsolete-part traceability or a documented cross-reference is required.
What is the price of CS82C84AZ?
The current commercial terms for CS82C84AZ should be requested through the Request a Quote form on this page. The form allows the requested quantity, package configuration, and traceability requirements to be evaluated together. Because legacy clock-generator availability may depend on lot continuity and original manufacturer distribution, request a written quotation rather than relying on a general market reference.
What is the lead time for CS82C84AZ?
The current lead time for CS82C84AZ should be confirmed through the Request a Quote form on this page. Include the required quantity and acceptable alternate date or package condition in the request. This approach is particularly useful for legacy clock-generation devices where factory stock, original packaging, and production-lot continuity can materially affect the schedule.
Is CS82C84AZ in stock?
Current CS82C84AZ stock should be confirmed through the Request a Quote form on this page. Provide the required quantity, reel or tube preference, acceptable date code, and any inspection requirements. Inventory status can vary by package and lot, so a specific procurement request provides a more useful response than a general availability statement.
How should the CS82C84AZ crystal and layout be designed?
Connect the crystal and oscillator components according to the manufacturer application circuit, and route oscillator traces away from switching currents and noisy logic. Keep supply decoupling close to the device and use a continuous return path beneath the clock circuitry. The manufacturer's oscillator and timing diagrams should define the crystal value, load arrangement, and allowable drive conditions; do not infer those values solely from the 25 MHz maximum rating.

Data referensi kejuruteraan untuk CS82C84AZ — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the CS82C84AZ when repairing or building an 8086-family system that already uses a 20-LCC J-lead clock-generator footprint and a 5 V rail. Its explicit support for the 80C86, 80C88, 8086, and 8088 makes it the clearest choice when the original processor application must be retained. The CS82C84AZ96 is a closely related candidate when the same 82C84A timing function and 20-pin PLCC format are required, but its suffix-specific qualification and procurement conditions should be reviewed. Consider CP82C84AZ or 84068012A only after their pin tables and timing characteristics have been checked against the board. For any alternative, confirm clock edge, reset polarity, READY synchronization, oscillator network, and lead orientation before production release.

Perbandingan dengan Gantian

Parametr Produk Ini CS82C84AZ96 CP82C84AZ 84068012A
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics
Package 20-LCC (J-Lead) 20-LCC (J-Lead) 20-LCC (J-Lead) 20-LCC (J-Lead)
Product Type CMOS clock generator-driver Clock generator-driver 82C84A clock-generator-device family 82C84A replacement category
Maximum Clock Frequency 25 MHz 25 MHz 25 MHz 25 MHz
Number of Clock Outputs 1 1 1 1
Supply Voltage 5 V 5 V 5 V 5 V
Oscillator Arrangement Crystal-controlled oscillator Crystal-controlled oscillator Crystal-controlled oscillator Crystal-controlled oscillator
Divider Function Divide-by-3 counter Divide-by-3 counter Divide-by-3 counter Divide-by-3 counter
Synchronization and Reset Logic Ready synchronization and reset logic Ready synchronization and reset logic Ready synchronization and reset logic Ready synchronization and reset logic
Supported Processor Families 80C86, 80C88, 8086, and 8088 82C84A family 82C84A family 82C84A replacement category

Penyeberangsung Jelas

  • Documented support for four processor families (vsCP82C84AZ)
  • Defined 25 MHz and single-output operating class (vsCS82C84AZ96)
  • Integrated clock, synchronization, and reset functions (vs84068012A)

Catatan Desain

Place the CS82C84AZ close to the processor clock and reset connections, and route the oscillator network away from switching power stages and high-current return paths. Keep crystal traces short, avoid ground-plane splits beneath oscillator pins, and provide a low-impedance ground connection. The clock and Ready paths should avoid crossing unrelated high-current edges because timing disturbance can cause intermittent processor synchronization errors.

Use the manufacturer 20-LCC J-lead footprint and verify pin 1 orientation against the actual package drawing before release. Confirm that every oscillator, clock, reset, and Ready connection aligns with the PCB netlist; an apparent family-level match is insufficient if the suffix changes lead arrangement or package orientation. After assembly, inspect solder joints across all J-leads because clock-generator failures can result from marginal connections.

Use the manufacturer timing diagrams as the reference for clock edge, READY synchronization, reset release, and oscillator startup behavior. Verify the actual crystal frequency, load capacitance, and drive level rather than selecting them only from the 25 MHz headline rating. Oscilloscope measurements at the processor clock pin should confirm clean edges and stable frequency over supply variation and operating temperature.

Do not assume that any similarly named 82C84A device is a drop-in replacement. The suffix, temperature grade, package orientation, READY timing, reset polarity, and oscillator arrangement can affect interchangeability. For maintenance and migration work, compare the complete manufacturer pin and timing tables and perform processor-bus validation before releasing the replacement into production.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for CS82C84AZ. AEC-Q100 qualification is not indicated for this legacy clock and timing IC.

Pencarian Berhubungan

CS82C84AZ datasheet CS82C84AZ datasheet pdf CS82C84AZ pinout CS82C84AZ equivalent CS82C84AZ replacement CS82C84AZ cross reference CS82C84AZ vs CP82C84AZ Renesas CS82C84AZ CS82C84AZ 20-LCC footprint CS82C84AZ 25MHz clock generator CS82C84AZ 8086 application CS82C84AZ price CS82C84AZ stock CS82C84AZ lead time CS82C84AZ oscillator circuit

Komponen dan Tanda berkaitan

Renesas Electronics Intersil CS82C84AZ CS82C84AZ96 CP82C84AZ 84068012A CMOS clock generator-driver clock and timing IC clock generator clock driver crystal-controlled oscillator divide-by-three counter Ready synchronization reset logic 8086 microprocessor 8088 microprocessor 80C86 CMOS microprocessor 80C88 CMOS microprocessor 20-LCC J-lead package J-lead through-hole package 5 V power supply 25 MHz clock legacy embedded control processor timing Renesas / Intersil
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ