CS82C84AZ - 25MHz CMOS Clock Generator | Renesas
料号: CS82C84AZ ✓ 量产中CS82C84AZ 概述
A clock generator-driver is a clock and timing IC that converts a stable frequency reference into the processor clock and coordinates associated synchronous control signals. Within the broader clock and timing hierarchy, the CS82C84AZ belongs to the clock-generator-driver class, supporting the clock and timing requirements of older CMOS and NMOS microprocessor systems. Its principal engineering value is integration: a clock source, divider, driver, and Ready synchronization logic are combined in one package.
The primary operating specifications are a 25 MHz maximum clock frequency, one clock channel, a 5 V supply, and a 20-LCC J-lead package. The manufacturer datasheet identifies the circuit as a high-performance CMOS clock generator-driver intended to service both CMOS and NMOS microprocessors. These characteristics make it relevant to industrial control, embedded legacy processor, test-equipment, and equipment-maintenance designs that retain 8086-family processors.
The CS82C84AZ architecture contains a crystal-controlled oscillator, a divide-by-three counter, clock-driver circuitry, and complete Ready synchronization and reset logic. The clock output is intended for the clock requirements of compatible 8086-family systems, while the synchronization section coordinates the processor's Ready input with system timing events. Designers should review the timing diagrams before selecting oscillator components or clock-divider settings for a specific processor operating mode.
Typical applications include legacy 8086 and 8088 embedded controllers, 80C86 and 80C88 CMOS processor modules, industrial terminal controllers, programmable logic test fixtures, and repair or obsolescence-management programs for vintage x86-compatible equipment. In these systems, the CS82C84AZ serves as the central timing component rather than the processor itself, generating the operating clock and supporting the associated synchronization sequence.
The primary design consideration is package and timing compatibility. The CS82C84AZ uses a 20-LCC J-lead package, so board layout, pin numbering, crystal connection, reset sequencing, and READY timing must match the manufacturer pin description. Decoupling capacitors should be placed close to the supply pins, while crystal and oscillator routing should avoid switching-node and high-current return paths to reduce timing disturbance.
This product overview combines the manufacturer function description with practical system-level guidance, including legacy processor use cases, package constraints, and engineering checks for clock, reset, and synchronization implementation.
直接替换替代料: CS82C84AZ ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
CS82C84AZ96
✅ 直接替换📋 参考替代料(不在目录中)
CP82C84AZ
✅ 直接替换📋 参考替代料(不在目录中)
84068012A
✅ 直接替换📋 参考替代料(不在目录中)
CS82C84AZ 规格参数
| Product Type | CMOS clock generator-driver |
| 最大时钟频率 | 25 MHz |
| Number of Clock Outputs | 1 |
| 电源电压 | 5 V |
| Supported Processor Families | 80C86, 80C88, 8086, and 8088 |
| Process Technology | CMOS |
| Oscillator Type | Crystal-controlled oscillator |
| Internal Divider | Divide-by-3 counter |
| Synchronization Logic | Ready synchronization and reset logic |
| 封装 | 20-LCC (J-Lead) |
| 引脚数量 | 20 pins |
| 安装类型 | Through-hole |
CS82C84AZ 20-lcc (j-lead) 引脚配置指南
CS82C84AZ(20-lcc (j-lead) 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: CS82C84AZ.
请参阅 数据手册 以查看完整引脚配置。
典型应用
CS82C84AZ 适用于 6 应用s: 8086 Embedded Processor Controller, 8088 Bus-Based Control System, 80C86 CMOS Processor Module, 80C88 Processor Timing Card, Legacy Test Fixture, Obsolete Equipment Repair.
8086 Embedded Processor Controller
The CS82C84AZ fits an 8086-based embedded controller because the manufacturer identifies the 8086 as a supported processor family. Its 25 MHz clock capability, 5 V supply, crystal-controlled oscillator, and divide-by-three counter provide the central clock reference required by a compatible processor board. The integrated Ready synchronization and reset logic also supports coordinated system startup rather than requiring separate clock and handshake circuitry. For an existing design, verify oscillator values, clock edge requirements, READY timing, and package pin assignments in the manufacturer timing diagrams before committing the layout.
推荐
8088 Bus-Based Control System
The CS82C84AZ is appropriate for an 8088 bus-based control system that requires a central processor clock and coordinated Ready signaling. Its single 25 MHz-class clock output and integrated reset and synchronization functions suit a legacy control architecture, while the 5 V operating requirement matches conventional 8088-era system rails. Because the device also includes a divide-by-three counter, designers must determine whether the target clock source and processor operating mode require division. Review crystal loading, startup behavior, and READY transition timing against the manufacturer circuit and timing diagrams.
推荐
80C86 CMOS Processor Module
The CS82C84AZ is suitable for a 80C86 CMOS processor module because the manufacturer specifically identifies the 80C86 as a supported family. Its CMOS implementation, 5 V supply, and 25 MHz maximum clock rating provide a conventional timing solution for systems retaining the 80C86 architecture. Integrated Ready synchronization allows the processor handshake to be coordinated with the system clock, while reset logic supports repeatable initialization. The implementation must still match the processor's clock period, reset polarity, synchronization requirements, and exact 20-LCC footprint on the assembled board.
推荐
80C88 Processor Timing Card
The CS82C84AZ can serve as the clock and timing device in an 80C88 processor card or modular legacy controller. The 80C88 is explicitly named by the manufacturer as a supported processor, and the device's 25 MHz capability and integrated Ready/reset functions provide the timing infrastructure required by an 8088-family design. Placement in a separate timing card is especially useful when restoring older equipment or separating oscillator routing from high-current processor buses. Confirm the 20-LCC J-lead footprint, pin numbering, clock edge, oscillator network, and reset sequence before fabrication.
推荐
Legacy Test Fixture
The CS82C84AZ is useful in a legacy processor test fixture that must reproduce the clock, reset, and Ready timing expected by an 8086-family device. Its single 25 MHz-class clock output and integrated synchronization logic allow a fixture to provide a controlled timing environment without duplicating every timing function externally. This application also benefits from the device's established 20-LCC J-lead package, which can simplify repairs in older fixture hardware. The fixture designer should measure startup, clock waveform, READY response, and reset timing using the manufacturer timing diagrams as the acceptance reference.
推荐
Obsolete Equipment Repair
The CS82C84AZ is suitable for repairing or extending vintage equipment built around an 8086, 8088, 80C86, or 80C88 processor. Retaining the original clock-generator function minimizes changes to board routing, oscillator networks, reset sequencing, and READY handshakes. The 20-LCC J-lead package and 25 MHz operating limit make it particularly relevant to service inventory for established platforms. Before installation, compare every lead position against the board schematic and manufacturer pinout, then verify clock frequency and timing after repair to avoid introducing a processor-bus synchronization fault.
推荐
推荐产品汇总
工程参考数据: CS82C84AZ ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | CS82C84AZ96 | CP82C84AZ | 84068012A |
|---|---|---|---|---|
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-LCC (J-Lead) | 20-LCC (J-Lead) | 20-LCC (J-Lead) | 20-LCC (J-Lead) |
| Product Type | CMOS clock generator-driver | Clock generator-driver | 82C84A clock-generator-device family | 82C84A replacement category |
| Maximum Clock Frequency | 25 MHz | 25 MHz | 25 MHz | 25 MHz |
| Number of Clock Outputs | 1 | 1 | 1 | 1 |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
| Oscillator Arrangement | Crystal-controlled oscillator | Crystal-controlled oscillator | Crystal-controlled oscillator | Crystal-controlled oscillator |
| Divider Function | Divide-by-3 counter | Divide-by-3 counter | Divide-by-3 counter | Divide-by-3 counter |
| Synchronization and Reset Logic | Ready synchronization and reset logic | Ready synchronization and reset logic | Ready synchronization and reset logic | Ready synchronization and reset logic |
| Supported Processor Families | 80C86, 80C88, 8086, and 8088 | 82C84A family | 82C84A family | 82C84A replacement category |
关键差异点
- Documented support for four processor families (对比 CP82C84AZ)
- Defined 25 MHz and single-output operating class (对比 CS82C84AZ96)
- Integrated clock, synchronization, and reset functions (对比 84068012A)
设计说明
Place the CS82C84AZ close to the processor clock and reset connections, and route the oscillator network away from switching power stages and high-current return paths. Keep crystal traces short, avoid ground-plane splits beneath oscillator pins, and provide a low-impedance ground connection. The clock and Ready paths should avoid crossing unrelated high-current edges because timing disturbance can cause intermittent processor synchronization errors.
Use the manufacturer 20-LCC J-lead footprint and verify pin 1 orientation against the actual package drawing before release. Confirm that every oscillator, clock, reset, and Ready connection aligns with the PCB netlist; an apparent family-level match is insufficient if the suffix changes lead arrangement or package orientation. After assembly, inspect solder joints across all J-leads because clock-generator failures can result from marginal connections.
Use the manufacturer timing diagrams as the reference for clock edge, READY synchronization, reset release, and oscillator startup behavior. Verify the actual crystal frequency, load capacitance, and drive level rather than selecting them only from the 25 MHz headline rating. Oscilloscope measurements at the processor clock pin should confirm clean edges and stable frequency over supply variation and operating temperature.
Do not assume that any similarly named 82C84A device is a drop-in replacement. The suffix, temperature grade, package orientation, READY timing, reset polarity, and oscillator arrangement can affect interchangeability. For maintenance and migration work, compare the complete manufacturer pin and timing tables and perform processor-bus validation before releasing the replacement into production.
合规信息
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals status is stated for CS82C84AZ. AEC-Q100 qualification is not indicated for this legacy clock and timing IC.