CY8C3445AXI-107 - 50MHz 32KB Flash MCU | Infineon
MPN: CY8C3445AXI-107 ✓ AktifCY8C3445AXI-107 Ringkasan
A PSoC 3 microcontroller is a mixed-signal embedded controller that integrates an 8051 CPU, programmable analog blocks, digital peripherals, and configurable I/O into one device. This programmable architecture allows product designers to consolidate functions that might otherwise require separate analog, digital, and communication components, reducing board area and simplifying firmware development.
The CY8C3445AXI-107 provides a 50 MHz operating speed, 32 KB of flash organized as 32K x 8, and 4 KB of SRAM. Flash supports up to 100,000 write cycles and 20 years of data retention. Up to 8 KB of flash can be used for ECC or configuration storage, while the family also supports up to 2 KB of EEPROM with 1 million write cycles.
The single-cycle 8051 core executes multiply and divide instructions, making the device suitable for control loops, human-machine interfaces, and compact embedded systems. Its programmable mixed-signal architecture is particularly useful when a product requires both digital control and analog functions such as touch sensing, signal conditioning, or programmable threshold detection.
Typical uses include industrial control panels, building automation modules, motor-control subsystems, low-cost capacitive-sensing products, compact instrumentation, and energy-management controllers. The 50 MHz processing rate supports responsive multitasking and time-critical peripheral control, while the 100-pin package exposes a broad set of GPIO and analog resources.
PCB implementation should preserve short analog routing, provide clean grounding around sensitive inputs, and follow the manufacturer’s decoupling and pin-multiplexing guidance. Confirm the exact peripheral assignments, package dimensions, and exposed-pin requirements against the manufacturer datasheet before releasing a new layout.
This product record combines the core device specifications, package identity, current sourcing options, drop-in family alternatives, and application-oriented design guidance. It also highlights differences among suffix variants so engineers can distinguish speed, packaging, and ordering options before selecting a replacement.
Pilihan pengganti yang segera untuk CY8C3445AXI-107 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CY8C3445AXI-107 (sama faktor bentuk dan kaki) — berbeza dalam Product Type.
CY8C3445AXE-107
✅ Masuk Drop-InHubungi untuk harga
CY8C3445AXA-107
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CY8C3445AXI-104
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CY8C3445AXI-107 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit PSoC 3 mixed-signal microcontroller |
| CPU Architecture | 8051 single-cycle core |
| Maximum CPU Frequency | 50 MHz |
| Flash Program Memory | 32 KB (32K x 8) |
| SRAM Memory | 4 KB |
| Maximum Family Flash Capacity | 64 KB |
| ECC or Configuration Storage | Up to 8 KB flash |
| EEPROM Memory | Up to 2 KB |
| Flash Write Endurance | 100,000 write cycles |
| Flash Data Retention | 20 years |
| EEPROM Write Endurance | 1,000,000 cycles |
| Arithmetic Instructions | Multiply and divide supported |
| Package Type | 100-pin LQFP |
| Package Body Size | 14 x 14 mm |
| Jenis Pemasangan | Surface mount |
Panduan Konfigurasi Pin CY8C3445AXI-107 14 x 14 mm
Konfigurasi pin untuk CY8C3445AXI-107 (14 x 14 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CY8C3445AXI-107.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CY8C3445AXI-107 patut untuk 6 aplikasis: Industrial Control Panel, Capacitive-Touch Interface, Motor Control Subsystem, Building Automation Module, Compact Instrumentation, Energy Management Controller.
Industrial Control Panel
The CY8C3445AXI-107 fits an industrial control panel that coordinates buttons, indicators, sensors, communications, and configurable control logic. Its 50 MHz single-cycle 8051 core provides responsive task scheduling, while 32 KB of flash and 4 KB of SRAM support embedded firmware, interface state, and control tables. The 100-pin package offers extensive peripheral access for panel wiring. Engineers should map indicator drive, input conditioning, and external interface functions through the manufacturer pin table, provide local supply decoupling, and verify worst-case electrical conditions for the intended industrial environment.
Disebarkan
Capacitive-Touch Interface
The CY8C3445AXI-107 is suitable for a capacitive-touch user interface because the PSoC 3 family combines programmable analog functions with a 50 MHz 8051 controller. The MCU can evaluate touch inputs, update display indicators, and enforce debounce or product-specific gestures without requiring a separate analog controller. Its 4 KB SRAM supports short-lived touch results and interface buffers, while 32 KB flash accommodates firmware and calibration constants. Validate touch-channel performance, electrode geometry, acquisition timing, and electromagnetic immunity with the manufacturer’s application guidance before production.
Disebarkan
Motor Control Subsystem
The CY8C3445AXI-107 can serve as the supervisory controller in a compact motor-control subsystem that handles position commands, interlocks, speed thresholds, and fault reporting. A 50 MHz single-cycle 8051 core supports deterministic timing, and the programmable analog resources can assist with sensing and threshold functions when the system uses compatible external drive circuitry. The 32 KB flash capacity is suitable for control algorithms and parameter sets, while 4 KB of SRAM accommodates active state. Keep high-current switching paths separated from sensitive analog routing and verify timing against the selected power stage.
Disebarkan
Building Automation Module
The CY8C3445AXI-107 fits a building-automation node that combines environmental sensing, configurable digital inputs, relay-control logic, and status communication. Its mixed-signal PSoC architecture allows analog measurement functions to coexist with an 8-bit control processor, reducing the need for separate signal-conditioning devices. The 50 MHz operating rate supports responsive control logic, and the 32 KB flash and 4 KB SRAM provide practical application memory. Define input thresholds, isolation boundaries, debounce timing, and low-power behavior, then confirm thermal and regulatory requirements for the deployed enclosure.
Disebarkan
Compact Instrumentation
The CY8C3445AXI-107 is appropriate for compact instrumentation that acquires sensor data, applies configuration, and presents measurements through a local interface. Its programmable analog and digital architecture supports measurement-oriented designs where component consolidation is valuable. The 50 MHz CPU handles acquisition sequencing and control, while 32 KB of flash stores firmware and calibration data and 4 KB of SRAM holds working samples and state. Use careful grounding and short analog traces, validate accuracy across the intended input range, and confirm that the selected external front end works with the device’s analog capabilities.
Disebarkan
Energy Management Controller
The CY8C3445AXI-107 can coordinate an energy-management subsystem that monitors operating conditions, controls relays or power stages, and records system status. Its 32 KB flash provides room for algorithms and configuration, while 4 KB of SRAM supports counters, schedules, and acquisition buffers. The 50 MHz processing rate allows fast execution of supervisory logic without requiring a larger processor in modest systems. For practical implementation, separate measurement paths from switching-node energy, apply appropriate filtering, and validate average and peak power dissipation in the final enclosure and operating environment.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CY8C3445AXI-107 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CY8C3445AXE-107 | CY8C3445AXA-107 | CY8C3445AXI-104 |
|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin 14 x 14 mm package | 100-pin 14 x 14 mm package | 100-pin LQFP family package |
| CPU Architecture | Single-cycle 8051 | 8051 PSoC 3 | 8051 PSoC 3 | 8-bit 8051 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz | 50 MHz |
| Flash Program Memory | 32 KB (32K x 8) | 32 KB (32K x 8) | 32 KB (32K x 8) | 32 KB |
| Product Family | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34xx | PSoC 3 CY8C34 Family |
Penyeberangsung Jelas
- High-performance 8-bit control with substantial memory (vsCY8C3445AXI-104)
- Same documented core configuration in an alternate ordering code (vsCY8C3445AXE-107)
- Pin-compatible family sourcing option (vsCY8C3445AXA-107)
Catatan Desain
Place all required supply bypass capacitors close to their associated power pins and follow the manufacturer’s recommended values and placement. Keep analog inputs and references on short, quiet traces, and avoid routing them beneath switching or high-current outputs. The 100-pin LQFP footprint also requires careful fanout planning so programming signals, communications, and analog inputs can reach their intended pins without long serpentine routes.
Separate quiet analog ground paths from switching and return-current paths where the board stack-up permits. Use a continuous ground reference beneath sensitive analog circuitry and keep capacitive-touch electrodes away from high-voltage switching nodes and fast digital edges. Validate the final layout for crosstalk, touch sensitivity, and analog settling because small routing differences can affect mixed-signal performance.
Do not assume that every CY8C3445 suffix is interchangeable without checking the ordering-code table. The AXI, AXA, AXE, and -104 codes can encode differences that affect the approved configuration, even when the core frequency, flash size, and physical package format appear identical. Before substitution, compare the exact pin table, temperature range, qualification status, firmware target, and production notices.
Budget the MCU supply for normal operation, startup, peripheral loading, and the selected I/O configuration rather than using only the idle-state estimate. Confirm that every rail meets its specified operating range at the relevant pins, including transients caused by attached sensors or communications. Decoupling must be placed directly at the package pins so switching energy does not create voltage excursions on the same supply domain.
Treat clocked outputs, communications, and programmable peripheral signals as potential sources of coupling into sensitive analog channels. Maintain practical return paths, avoid unnecessary stubs, and observe signal rise-time and loading limits from the manufacturer datasheet. For touch electrodes or sensor inputs, compare the PCB construction, guard structures, acquisition settings, and calibration procedure with the manufacturer’s recommended design pattern.
Maklumat Kesediaan
No specific compliance declarations for the exact ordering code are included in the product records.