CY8C3665LTI-004 - 67MHz 32KB Flash PSoC 3 | Cypress
MPN: CY8C3665LTI-004 ✓ AktifCY8C3665LTI-004 Ringkasan
A PSoC 3 is a programmable system-on-chip, a semiconductor category that combines an embedded microcontroller core with configurable analog, digital, memory, and connectivity resources. In the system hierarchy, the CY8C3665LTI-004 belongs to the microcontroller, embedded processor, and mixed-signal system-on-chip families rather than to a general-purpose fixed-function logic device.
The CY8C3665LTI-004 provides an 8-bit 8051 processor operating at 67 MHz, with 32 KB organized as 32K x 8 flash memory. Its programmable architecture can support embedded control, analog measurement, digital logic, and signal-processing functions in one device. The 48-QFN surface-mount package reduces board area, while the exposed pad supports thermal performance when the PCB provides suitable copper area.
The PSoC architecture combines CPU execution with configurable blocks that can be assigned to functions such as analog-to-digital conversion, digital-to-digital conversion, timers, serial communications, and programmable logic. This integration reduces the number of discrete components required for many control designs. Exact converter resolution, I/O count, voltage limits, and power characteristics should be confirmed in the manufacturer datasheet for the selected operating configuration.
Typical uses include industrial sensor nodes, compact motor-control systems, building automation interfaces, consumer accessories, and low-power embedded monitoring equipment. The same 8051-based PSoC 3 platform is especially useful when a design benefits from configurable peripherals without adding a separate analog or digital IC.
PCB implementation should follow the manufacturer pin and thermal-pad guidance for the 48-QFN package. Keep sensitive analog signals away from fast-switching nodes, provide continuous ground-plane return paths, and place decoupling capacitors close to the supply pins. Verify exposed-pad solder requirements and the assembled PCB land pattern before releasing a production design.
This page organizes the verified device identity, package details, programmer compatibility, replacement considerations, and engineering guidance into one procurement-focused resource. Use the manufacturer datasheet for the authoritative pin-description table, electrical limits, memory map, and configuration guidance.
Pilihan pengganti yang segera untuk CY8C3665LTI-004 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CY8C3665LTI-004 (sama faktor bentuk dan kaki) — berbeza dalam CPU Core, Flash Memory, Package, Product Type, Programmable Architecture.
CY8C3665LTI-043
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →CY8C3665LTI-004 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Programmable System-on-Chip (PSoC 3) |
| CPU Core | 8051, 8-bit |
| Maximum CPU Frequency | 67 MHz |
| Flash Memory | 32 KB (32K x 8) |
| Programmable Architecture | Configurable digital and analog blocks |
| Kemasan | 48-QFN (7 x 7 mm) |
| Thermal Pad | Exposed pad |
| Jenis Pemasangan | Surface mount |
| Product Series | PSoC 3, CY8C36 family |
| Nonvolatile Subsystem | Flash |
| Programming Interface | ISP-SWD |
Panduan Konfigurasi Pin CY8C3665LTI-004 48-qfn (7 x 7 mm)
Konfigurasi pin untuk CY8C3665LTI-004 (48-qfn (7 x 7 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CY8C3665LTI-004.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CY8C3665LTI-004 patut untuk 6 aplikasis: Industrial Sensor and Control Nodes, Programmable Analog Measurement Systems, Compact Motor and Actuator Control, Building Automation Interfaces, Low-Power Embedded Monitoring, Programmable Digital Logic and Interface Hub.
Industrial Sensor and Control Nodes
The CY8C3665LTI-004 fits compact sensor nodes because its 8-bit 67 MHz 8051 core provides control processing while PSoC 3 configurable blocks consolidate analog and digital functions. A designer can place sensing, signal conditioning, timing, and control logic in one device instead of distributing them across a microcontroller and several dedicated ICs. The 32 KB of flash supports firmware storage for protocol handling, calibration, and operating logic. The 48-QFN package helps reduce board area in distributed industrial equipment, although temperature grade, operating voltage, and isolation requirements must be verified before deployment.
Disebarkan
Programmable Analog Measurement Systems
The CY8C3665LTI-004 is appropriate for programmable measurement systems because PSoC 3 combines an 8051 execution core with configurable analog resources in the same package. This architecture can implement acquisition, filtering, thresholding, and control functions without relying entirely on fixed peripheral arrangements. The 67 MHz clock supports responsive control-loop execution, while 32 KB of flash accommodates firmware for calibration and signal processing. Exact ADC resolution, input limits, sampling characteristics, and analog block assignments should be confirmed in the manufacturer datasheet before setting measurement accuracy requirements.
Disebarkan
Compact Motor and Actuator Control
The CY8C3665LTI-004 can serve as the central controller in compact actuator designs where board area is constrained. Its 8-bit 67 MHz processor can execute motion sequencing and supervisory logic, while configurable digital blocks can implement timing or dedicated functions. The 32 KB flash capacity provides room for control code and parameter storage. The 48-QFN package is advantageous in dense control boards, but designers must verify the required I/O count, timer resources, operating voltage, and thermal performance against the manufacturer documentation.
Disebarkan
Building Automation Interfaces
The CY8C3665LTI-004 is suitable for building-automation interface modules that combine sensing, logic, communications, and local control in a compact assembly. The programmable PSoC architecture allows one device to replace several fixed-function components, while the 8051 core at 67 MHz supports protocol and control tasks. Its 32 KB flash provides space for embedded application firmware. Before selecting it for HVAC, access, or lighting equipment, confirm the required communication peripherals, environmental ratings, supply range, and long-term availability for the exact ordering code.
Disebarkan
Low-Power Embedded Monitoring
The CY8C3665LTI-004 can support low-power monitoring products that periodically acquire information, evaluate thresholds, and communicate results. The programmable architecture allows designers to configure only the digital and analog resources needed for a given measurement rather than assigning fixed functions. The 8-bit processor provides adequate control capability, and 32 KB of flash accommodates firmware and configuration data. Actual sleep currents, wake-up timing, and power-management modes should be taken from the manufacturer datasheet because operating mode and clock configuration materially affect energy consumption.
Disebarkan
Programmable Digital Logic and Interface Hub
The CY8C3665LTI-004 is useful when a product needs programmable digital logic in addition to conventional microcontroller control. PSoC 3 configurable blocks can consolidate protocol handling, timing, state-machine logic, and interface functions, reducing external component count. The 67 MHz 8051 core can manage higher-level protocols, and 32 KB of flash provides firmware storage for configuration and field behavior. Use the family datasheet to validate available GPIO, serial interfaces, timing blocks, package pin assignments, and operating limits for the intended implementation.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CY8C3665LTI-004 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CY8C3665LTI-043 |
|---|---|---|
| Brand | Cypress Semiconductor | Cypress Semiconductor |
| Package | 48-QFN (7 x 7 mm) | 48-QFN (7 x 7 mm) |
| Product Type | PSoC 3 programmable system-on-chip | PSoC 3 programmable system-on-chip |
| CPU Core | 8051, 8-bit | 8051, 8-bit |
| Maximum CPU Frequency | 67 MHz | 67 MHz |
| Flash Memory | 32 KB (32K x 8) | 32 KB (32K x 8) |
| Programmable Architecture | Configurable digital and analog blocks | Configurable digital and analog blocks |
| Mounting Type | Surface mount | Surface mount |
Penyeberangsung Jelas
- Maintains the same core frequency and flash configuration as the closest identified family alternative (vsCY8C3665LTI-043)
- Uses the same compact 48-QFN package class (vsCY8C3665LTI-043)
- Combines programmable analog and digital resources with a 67 MHz CPU (vsCY8C3665LTI-043)
Catatan Desain
Implement the exposed-pad land pattern exactly as specified in the manufacturer package drawing, including thermal vias, paste geometry, and the surrounding ground connection. The 48-QFN package is compact, so small placement errors can affect solderability or expose individual pads. Validate the assembly process with the selected PCB fabricator and inspect the exposed pad for adequate void control after reflow.
Separate sensitive analog routing from switching nodes and high-current paths, then return both through a continuous ground plane. Place decoupling capacitance at the device supply pins with very short traces to limit loop area. Because PSoC 3 combines configurable analog and digital resources, successful board design depends on assigning resources deliberately rather than treating every peripheral as an independent fixed-function block.
Do not assume that a related CY8C3665 ordering suffix is automatically interchangeable. Confirm pin names, exposed-pad connections, programming signals, operating voltage, temperature grade, and qualification suffix against the manufacturer ordering information. The 48-QFN footprint is small, and programmer compatibility must be checked for the exact device rather than inferred only from its 8051 core.
Maklumat Kesediaan
The available product and datasheet records do not provide explicit compliance declarations for the exact MPN. The PSoC 3 CY8C36 family also provides an optional 12-bit ADC function, but the final converter specification and enabled peripheral resources must be confirmed for the exact device configuration.