CY8C3665LTI-043 - 67MHz 32KB Flash 8-bit MCU | Infineon
MPN: CY8C3665LTI-043 ✓ AktifCY8C3665LTI-043 Ringkasan
A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller architecture that integrates processing, memory, and configurable peripheral functions. In the product hierarchy, PSoC 3 belongs to the broader family of flash-programmable system-on-chip devices, combining the capabilities of a microcontroller with application-specific analog and digital blocks. This integration can reduce external component count while allowing peripheral behavior to be adapted through firmware and device configuration.
The CY8C3665LTI-043 operates from 0.5 V to 5.5 V and provides 32 KB of flash in a 32K × 8 organization. Its 67 MHz clocking capability and 8051-compatible core support control workloads requiring responsive peripheral handling. The 68-QFN package also provides an exposed pad according to the device description, which supports PCB-level thermal management in compact embedded systems.
The PSoC architecture distinguishes this device from a conventional fixed-function 8-bit MCU by integrating configurable blocks for digital control and analog functions. The exact available block resources, converters, timers, and I/O assignments are determined by the CY8C36 family architecture and individual device configuration. Firmware therefore must account for the pin routing, interrupt behavior, clock settings, and resource allocation associated with the selected configuration.
Typical uses include industrial control modules, compact sensor nodes, low-power embedded instruments, and connected equipment requiring both digital control and analog signal conditioning. The wide 0.5 V to 5.5 V supply range also supports designs that operate across multiple low-voltage rails, although the selected external components and operating conditions must remain within the device's electrical limits.
For PCB implementation, use the manufacturer's land pattern for the 68-QFN package and connect the exposed pad according to the recommended land pattern and thermal guidance. Confirm every signal assignment against the CY8C36 family pin description before routing because configurable PSoC peripherals can assign functions to different physical pins. Decoupling capacitors should be placed close to the relevant supply pins, while programming and debug access must remain unobstructed during manufacturing.
This product page consolidates the key electrical characteristics, package information, sourcing workflow, drop-in comparison, and practical integration considerations for the CY8C3665LTI-043. It also distinguishes verified device facts from parameters that require confirmation in the family datasheet, helping engineers assess the device before beginning firmware and hardware design.
Pilihan pengganti yang segera untuk CY8C3665LTI-043 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CY8C3665LTI-043 (sama faktor bentuk dan kaki) — berbeza dalam CPU Core, Flash Memory, Package, Product Type, Programmable Architecture.
CY8C3665LTI-044
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
CY8C3665LTI-043 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 8-bit PSoC 3 flash-programmable system-on-chip |
| CPU Core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 67 MHz |
| Flash Memory | 32 KB |
| Flash Organization | 32K × 8 bits |
| Tegangan Pemberi Arus Operasi | 0.5 V to 5.5 V |
| Device Family | PSoC 3 CY8C36xx |
| Kemasan | 68-QFN, 8 mm × 8 mm |
| Package Type | QFN |
| Jenis Pemasangan | Surface mount |
| Exposed Pad | Present |
| Programmable Architecture | Configurable analog and digital peripheral blocks |
| Program Memory Type | Flash |
Panduan Konfigurasi Pin CY8C3665LTI-043 qfn
Konfigurasi pin untuk CY8C3665LTI-043 (qfn pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CY8C3665LTI-043.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CY8C3665LTI-043 patut untuk 6 aplikasis: Industrial Sensor Nodes, Compact Control Instruments, Low-Voltage Embedded Systems, Connected Equipment, Automated Test Equipment, Smart IoT Edge Devices.
Industrial Sensor Nodes
The CY8C3665LTI-043 fits compact sensor nodes that combine measurement, local processing, and digital control. Its 8051-compatible 8-bit core operates up to 67 MHz, while configurable analog and digital blocks can support signal conditioning and peripheral routing without relying entirely on fixed external logic. The 32 KB of flash provides storage for application firmware, configuration tables, and calibration data. At the board level, the 68-QFN 8 mm × 8 mm package supports compact layouts, although the exposed-pad land pattern must follow the manufacturer layout. Designers should verify the required I/O count, ADC performance, temperature limits, and power-domain constraints before assigning the sensor interface and communications pins.
Disebarkan
Compact Control Instruments
The CY8C3665LTI-043 is suitable for compact instruments that coordinate front-panel controls, status indicators, sensors, and an embedded serial interface. The 67 MHz operating rate gives the 8051-compatible core more timing margin for routine control tasks than a basic low-speed controller. Its configurable peripheral blocks allow functions to be assigned according to the application rather than fixed entirely by dedicated pins. With 32 KB of flash, the device can hold the main control program and operating parameters. Engineering validation should include a worst-case timing review, peripheral resource mapping, brownout behavior, and a firmware update strategy suitable for field-maintained equipment.
Disebarkan
Low-Voltage Embedded Systems
The CY8C3665LTI-043 can serve as the central controller in low-voltage equipment whose rails fall within the device's 0.5 V to 5.5 V operating range. Its 8-bit architecture and 32 KB flash provide a practical balance for embedded control functions, while the PSoC 3 peripheral architecture allows analog and digital resources to share the device. The controller should be configured only for supply domains supported by the selected device configuration, and signal-generator outputs must be checked against the appropriate voltage limits. Power budgeting should include the MCU, external loads, pull networks, and any attached sensor or communications circuitry rather than considering processor consumption alone.
Disebarkan
Connected Equipment
The CY8C3665LTI-043 can coordinate local control functions in equipment that also communicates with a host or peripheral network. Its 8051-compatible core runs up to 67 MHz and can service protocol handling alongside control tasks, while the configurable PSoC blocks support digital I/O and analog functions on the same board. The 32 KB flash footprint is appropriate for applications with a focused firmware image, but protocol libraries, bootloader, and logging requirements must be included in the memory budget. Pin assignment should reserve the required communication and debug functions early, and the production design should verify programming access, clock accuracy, and system behavior across the intended voltage and temperature conditions.
Disebarkan
Automated Test Equipment
The CY8C3665LTI-043 can support compact automated test equipment that coordinates stimulus, measurement, sequencing, and pass-fail logic. Its configurable analog and digital peripheral blocks make it useful when a design needs both control functions and analog interfacing, while the 67 MHz 8051-compatible core handles deterministic supervisory tasks. The 68-QFN package reduces board area compared with larger leaded devices, enabling denser instrument electronics. Signal integrity and measurement accuracy remain system-level concerns: developers should separate sensitive analog routing from switching activity, confirm converter performance for the selected configuration, and validate timing margins under the maximum test-channel loading.
Disebarkan
Smart IoT Edge Devices
The CY8C3665LTI-043 is appropriate for small IoT edge devices that perform local sensing, filtering, actuator control, or protocol handling instead of relying entirely on a remote service. Its 32 KB of flash supports a focused embedded application, and its configurable analog and digital blocks can consolidate functions around the 8051-compatible core. The wide 0.5 V to 5.5 V operating range can simplify integration with low-energy circuitry. Product engineers should calculate the complete sleep and active power budget, account for radio and sensor loads, and use the peripheral routing capabilities carefully. Firmware updates and recovery behavior also need validation because interrupt timing and peripheral allocation can change the control response during maintenance.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CY8C3665LTI-043 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CY8C3665LTI-044 |
|---|---|---|
| Package | 68-QFN, 8 mm × 8 mm | 44-pin TQFP; package descriptions require confirmation |
| Brand | Infineon Technologies | Infineon Technologies |
| CPU Core | 8051-compatible 8-bit core | 8051-compatible 8-bit core |
| Maximum CPU Frequency | 67 MHz | 67 MHz |
| Flash Memory | 32 KB, 32K × 8 | 32 KB |
| Product Family | PSoC 3 CY8C36xx | PSoC 36xxx |
| Programmable Peripheral Architecture | Configurable analog and digital blocks | PSoC 3 configurable architecture |
| Mounting Type | Surface mount | Surface mount |
Penyeberangsung Jelas
- Compact 68-QFN implementation (vsCY8C3665LTI-044)
- High clock rate for an 8-bit PSoC 3 controller (vsCY8C3665LTI-044)
- 32 KB flash with configurable peripheral resources (vsCY8C3665LTI-044)
Catatan Desain
Use the manufacturer land pattern for the CY8C3665LTI-043 68-QFN package and preserve the exposed-pad geometry and paste mask. Keep decoupling components close to the associated supply pins, and route sensitive analog signals away from fast-changing digital and return-current paths. Confirm the pad numbering and alternate peripheral functions against the family pin table before releasing artwork, because PSoC routing options can change the function of a physical terminal.
Budget the supply system for the MCU and every attached load rather than the controller alone. The device supports a 0.5 V to 5.5 V operating range, but the valid configuration must match the selected supply domains. Check startup, brownout, and power-sequencing requirements for downstream circuits, and verify that external pull networks and sensors do not create sustained current paths between supply domains when the MCU enters a low-power state.
Plan configurable peripheral assignments before committing the PCB. Reserve pins required by communications, programming, debug, and critical interrupts, then review the resulting boot and application behavior. Use the exposed pad for the manufacturer's specified thermal and electrical land-pattern connection. A prototype should be checked for signal integrity, temperature rise, and correct function across the intended supply voltage before the layout is released for volume production.
Do not treat every member of the CY8C36 family as a footprint-compatible substitute. The package-code and ordering suffix can change the physical terminal arrangement, and a related 8051 core or identical 32 KB flash capacity does not by itself prove pin compatibility. Verify the exact orderable MPN, package drawing, pin table, speed grade, temperature grade, and exposed-pad connection before approving a replacement or second-source arrangement.
Maklumat Kesediaan
Compliance declarations are not stated in the cited device information and must be confirmed for the exact orderable MPN.