Infineon

CY8C3866LTI-068 - 67MHz 8051 PSoC 3 MCU | Infineon

MPN: CY8C3866LTI-068 ✓ Aktif
0.5 V to 5.5 V Vdss 48-QFN, 7 mm × 7 mm Package 67 MHz Speed 64 KB (64K × 8 bits) Memory
MOQ: 1 |

CY8C3866LTI-068 Ringkasan

Infineon Technologies CY8C3866LTI-068 is an 8-bit 8051 PSoC 3 system-on-chip with a 67 MHz core, 64 KB of flash memory, a 20-bit ADC, and a 48-QFN 7 mm × 7 mm package. It combines an embedded microcontroller, programmable digital and analog peripherals, and multiple memory resources in one mixed-signal device.

A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates an MCU core with configurable analog and digital functional blocks. PSoC 3 devices extend the 8051 instruction set with programmable peripherals, allowing designs to consolidate functions that would otherwise require separate analog, digital, and memory components. This integration can reduce board area, component count, and development effort.

The CY8C3866LTI-068 operates at up to 67 MHz and includes 64 KB of flash, 8 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash according to the Keil device summary. Its 20-bit analog-to-digital converter supports precision measurements, while programmable digital blocks can implement timers, counters, serial interfaces, and other control functions without excessive fixed peripheral overhead.

The device uses an 8051-compatible single-core architecture and provides a Peripheral Hub Unit with eight parallel access paths. The Keil device summary identifies 27 interrupt sources with eight priority levels, plus dual data pointers and four flash protection levels. These features make the MCU suitable for embedded control systems that combine acquisition, control, communications, and data-retention requirements.

Typical applications include industrial sensor controllers, building automation modules, consumer appliances, motor and process-control equipment, and compact embedded instruments. The 48-QFN package supports dense PCB layouts, while the integrated analog and programmable digital resources allow a system to be implemented with fewer external components than a discrete microcontroller-plus-peripheral design.

PCB design should preserve the exposed-pad thermal and electrical requirements of the 48-QFN package, place decoupling capacitors close to the supply pins, and follow the manufacturer pin-description table when assigning signals. Firmware configuration also requires careful allocation of the programmable blocks, ADC resources, clocks, interrupts, and I/O pins in PSoC Creator.

This page consolidates the device identity, key memory and analog specifications, drop-in family alternatives, application guidance, and practical design considerations into an engineering-focused reference for evaluating and implementing the CY8C3866LTI-068.

Pilihan pengganti yang segera untuk CY8C3866LTI-068 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

CY8C3866LTI-068T

✅ Masuk Drop-In
📦 48-QFN (7 mm × 7 mm)
Identical 8051 PSoC 3, 67 MHz core, 64 KB flash, and 48-QFN basis; the principal difference is tape-and-reel packaging rather than tape-and-reel-versus-tray handling.

📋 Alternatif rujukan (tidak dalam katalog)

CY8C3866LTI-030

✅ Masuk Drop-In
📦 48-QFN (7 mm × 7 mm)
Same 8051 core, 20-bit ADC, and 64 KB flash; the ordering suffix differs, with the remaining package and temperature details requiring confirmation for each revision.

📋 Alternatif rujukan (tidak dalam katalog)

CY8C3866LTI-068 Penilaian maksimum & Ciri-ciri Elektrik

Product Type PSoC 3 programmable system-on-chip
Processor Core 8051-compatible single core
CPU Maximum Frequency 67 MHz
Architecture 8-bit
Flash Memory 64 KB (64K × 8 bits)
SRAM 8 KB
Data EEPROM 1 KB
ECC Flash 8 KB
ADC Resolution 20-bit
Supply Voltage Range 0.5 V to 5.5 V
I/O Supply Voltage Range 1.7 V to 5.5 V
Kemasan 48-QFN, 7 mm × 7 mm
Kiraan Pin 48 pins
Jenis Pemasangan Surface mount
Interrupt Sources 27 sources
Interrupt Priority Levels 8 levels
Data Pointers 2
Flash Protection Levels 4 levels
Peripheral Hub Unit 8 parallel access paths

Panduan Konfigurasi Pin CY8C3866LTI-068 48-qfn, 7 mm × 7 mm

Konfigurasi pin untuk CY8C3866LTI-068 (48-qfn, 7 mm × 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-qfn, 7 mm × 7 mm untuk CY8C3866LTI-068

Tiada data garisan pin yang diperoleh untuk CY8C3866LTI-068.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

CY8C3866LTI-068 patut untuk 6 aplikasis: Industrial Sensor Controller, Building Automation Module, Process Control Equipment, Consumer Appliance Control, Embedded Data Acquisition Unit, Motor and Valve Control.

🏭

Industrial Sensor Controller

The CY8C3866LTI-068 fits industrial sensor controllers that require high-resolution acquisition and responsive control from one mixed-signal device. Its 20-bit ADC can capture sensor signals, while the 8051-compatible core running up to 67 MHz supports filtering, calibration, and control logic. The 64 KB flash provides room for firmware and configuration data, while 8 KB of SRAM supports working buffers. Programmable PSoC 3 blocks can implement timers, communications, and digital interfaces around the measurement chain, reducing reliance on separate logic devices. Engineers should confirm the ADC input range, external signal-conditioning needs, and 48-QFN exposed-pad layout in the manufacturer documentation.

🧩

Building Automation Module

The CY8C3866LTI-068 is well suited to compact building-automation modules that monitor environmental inputs and control lights, valves, or networked peripherals. The 20-bit ADC supports precise readings from temperature, humidity, and occupancy sensors, while programmable digital resources can provide timing and serial communication functions. With 64 KB flash, 8 KB SRAM, 1 KB data EEPROM, and 8 KB ECC flash, it supports application firmware, configuration, and persistent parameters. Its 48-QFN 7 mm × 7 mm package helps reduce board area, although careful decoupling and exposed-pad layout remain essential in compact controllers. Firmware should be tested for interrupt latency, resource conflicts, and low-power behavior before field deployment.

🏭

Process Control Equipment

The CY8C3866LTI-068 supports process-control equipment that combines sensor acquisition with deterministic embedded logic. The 20-bit ADC is the primary analog resource, while the 67 MHz 8051-compatible core can execute control algorithms, diagnostics, and communication tasks. The 27 interrupt sources and eight priority levels allow multiple real-time events to be managed, and programmable PSoC blocks extend timer, counter, and serial-interface capabilities. Memory partitioning between 64 KB flash, 8 KB SRAM, 1 KB EEPROM, and 8 KB ECC flash allows firmware and operating data to be separated. For motor, valve, or heater loops, validate timing margins, output-driver requirements, isolation, and safety shutdown behavior in the final hardware.

🔧

Consumer Appliance Control

The CY8C3866LTI-068 can serve as the primary controller in a compact consumer appliance by combining an embedded MCU, configurable digital functions, and analog measurement resources. A 20-bit ADC may monitor sensors, potentiometers, or temperature inputs, while programmable blocks can offload timing and interface tasks from the core. The 64 KB flash accommodates control code and lookup data, and the 8 KB SRAM accommodates transient control state. The 48-QFN package reduces PCB footprint compared with larger leaded packages, supporting space-constrained appliance boards. Product engineers should still budget external drivers for loads, maintain short supply paths, and verify all signal levels against the device's stated operating ranges.

📟

Embedded Data Acquisition Unit

The CY8C3866LTI-068 is appropriate for embedded data-acquisition units that need a compact processor, substantial flash, and high-resolution analog conversion. The 20-bit ADC supports precision measurement, while 8 KB of SRAM can hold acquisition buffers and 1 KB of EEPROM can preserve calibration or configuration values. The 8 KB ECC flash area offers additional protected storage, and the 27-source interrupt system can coordinate sampling, communication, and status events. The 8051 core at up to 67 MHz provides sufficient control bandwidth for preprocessing before data is transferred or logged. Designers should select suitable input protection, precision references, and external memory when acquisition volume exceeds the on-chip resources.

⚡

Motor and Valve Control

The CY8C3866LTI-068 can serve as the supervisory controller in a motor or valve-control subsystem where sensing, timing, and protection logic are required. Its programmable digital blocks can support timers, counters, and communication tasks, while the 20-bit ADC can monitor current, position, or temperature feedback. The 67 MHz core provides headroom for closed-loop calculations and diagnostics, and the 8 KB SRAM can hold motion-state information. The compact 48-QFN package is useful in dense control boards, but the final design must provide appropriate power stages, protection networks, and signal conditioning. Firmware and hardware validation should cover startup, stall, overcurrent, emergency-stop, and communications-failure scenarios.

Ringkasan Produk Disebarkan

CY8C3866LTI-068T Same-family tape-and-reel production variant Dipergunakan di: Industrial Sensor Controller, Building Automation Module, Process Control Equipment, Consumer Appliance Control, Embedded Data Acquisition Unit, Motor and Valve Control CY8C3866LTI-030 Same PSoC 3 controller family option Dipergunakan di: Industrial Sensor Controller, Building Automation Module, Process Control Equipment, Consumer Appliance Control, Embedded Data Acquisition Unit, Motor and Valve Control
What are the key specifications of CY8C3866LTI-068 that engineers should know?
The CY8C3866LTI-068 is an 8-bit PSoC 3 microcontroller with a 67 MHz 8051 core, 64 KB of flash, 8 KB of SRAM, a 20-bit ADC, and a 48-QFN 7 mm × 7 mm package. The Keil device summary also identifies 1 KB of data EEPROM, 8 KB of ECC flash, 27 interrupt sources, and eight priority levels. According to the Infineon product page, these resources combine with configurable analog and digital blocks in a single mixed-signal system-on-chip.
What is the operating voltage of CY8C3866LTI-068?
The CY8C3866LTI-068 has a listed supply-voltage range of 0.5 V to 5.5 V, while the related CY8C3866LTI-068T listing identifies an I/O operating range of 1.7 V to 5.5 V. According to the Infineon product page and Mouser device description, the device is based on the PSoC 3 CY8C38 family. Confirm the exact core and I/O rail assignments against the manufacturer datasheet before powering the board.
What is CY8C3866LTI-068 and what is a PSoC 3?
The CY8C3866LTI-068 is a PSoC 3 system-on-chip combining an 8051-compatible processor with programmable analog and digital peripherals. A PSoC, or programmable system-on-chip, is a mixed-signal MCU architecture that can configure resources such as timers, serial interfaces, and analog functions instead of relying only on fixed hardware. According to the Infineon product page, the device includes a 67 MHz 8051 core, 20-bit ADC, and 64 KB of flash.
Where can I download the CY8C3866LTI-068 datasheet PDF?
The official CY8C3866LTI-068 datasheet can be accessed through the Infineon product page at https://www.infineon.com/part/CY8C3866LTI-068, which links to ordering information, parameters, and the manufacturer datasheet. The manufacturer product page identifies the device as a PSoC 3 CY8C38 family part with an 8051 core, 20-bit ADC, and 64 KB of flash. Use the manufacturer document for final pin, electrical, timing, and package details.
Where can I find the CY8C3866LTI-068 pinout?
The CY8C3866LTI-068 pinout is found in the manufacturer datasheet and package documentation for its 48-QFN 7 mm × 7 mm package. The pin description table should be used to identify power, ground, programming, clock, analog, and multifunction GPIO assignments before PCB routing. The Infineon Developer Community also identifies pins 7, 8, and 10 as multifunction GPIO in a PSoC 3 design context.
Can CY8C3866LTI-068T replace CY8C3866LTI-068?
CY8C3866LTI-068T is the tape-and-reel ordering form of the closely related CY8C3866LTI-068 device and is the closest same-brand drop-in candidate identified. The cross-reference result directly compares these two MPNs and identifies the same 8051 PSoC 3, 67 MHz, 64 KB flash, and 48-QFN basis. Final replacement still requires verification of package orientation, exposed-pad treatment, temperature grade, and production requirements.
What is the best drop-in replacement for CY8C3866LTI-068?
CY8C3866LTI-068T is the best directly identified drop-in replacement for CY8C3866LTI-068 because the comparison identifies the same PSoC 3 CY8C38 family device and 48-QFN implementation; the principal distinction is the -T shipping format. CY8C3866LTI-030 is another same-family option with the same 8051 core, 20-bit ADC, and 64 KB flash, but its package and ordering details require comparison before substitution. No verified cross-brand drop-in equivalent was identified.
When should I choose CY8C3866LTI-068 over CY8C3866LTI-030?
Choose CY8C3866LTI-068 when the design requires its documented 48-QFN 7 mm × 7 mm implementation and production configuration ending in -068. Both devices are described by Infineon as PSoC 3 CY8C38 parts with an 8051 core, 20-bit ADC, and 64 KB flash. Treat CY8C3866LTI-030 as a possible family alternative only after confirming its package dimensions, pinout, exposed pad, temperature rating, and production status.
Is CY8C3866LTI-068 suitable for sensor and industrial control applications?
The CY8C3866LTI-068 is suitable for many sensor and industrial-control applications because it combines a 67 MHz 8051 core, a 20-bit ADC, 64 KB of flash, 8 KB of SRAM, programmable digital blocks, and 27 interrupt sources in one 48-QFN device. According to the Infineon product description, PSoC 3 provides configurable blocks that integrate MCU, memory, analog, and digital functions. Its usefulness depends on matching the I/O voltage, package, and peripheral configuration to the target board.
CY8C3866LTI-068 vs CY8C3866LTI-068T: which is better for production?
CY8C3866LTI-068 is the tray-oriented ordering form, while CY8C3866LTI-068T is identified as the tape-and-reel version for automated assembly. The direct comparison result confirms that both refer to the same 8051 PSoC 3, 67 MHz, 64 KB flash, 48-QFN device family. Choose the form that matches the board assembly process and distributor packaging requirements, while separately confirming temperature and lifecycle conditions.
What is the best Infineon equivalent for CY8C3866LTI-068?
The best directly supported Infineon equivalent is CY8C3866LTI-068T, which appears in a direct MPN comparison and retains the same 8051 PSoC 3, 67 MHz, 64 KB flash, and 48-QFN basis. CY8C3866LTI-030 is another same-family candidate with the same core, ADC resolution, and flash capacity, but it is not as directly tied to the target ordering configuration. No verified drop-in Infineon alternative with clearly identical package and pinout was found beyond these candidates.
How much flash and RAM does CY8C3866LTI-068 have?
The CY8C3866LTI-068 provides 64 KB of flash, 8 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash. According to the Keil device summary, the same device also has four flash protection levels and a single 8051 core operating up to 67 MHz. These memory resources support embedded firmware, configuration storage, working data, and protected flash-based code or parameters.
Does CY8C3866LTI-068 include an ADC?
The CY8C3866LTI-068 includes a 20-bit analog-to-digital converter. This is confirmed by the Infineon manufacturer product page and is consistent with the PSoC 3 family's configurable mixed-signal architecture. The ADC supports precision acquisition in sensor interfaces, process measurement, and industrial controls, although input-range, acquisition-time, and accuracy details should be taken from the manufacturer electrical-characteristics tables.
Is CY8C3866LTI-068 RoHS compliant?
The RoHS status of CY8C3866LTI-068 is not established by the product listings available for this record. Use the manufacturer material-declaration or compliance documentation associated with the exact ordering code before treating the part as compliant. The absence of a clear status in a distributor listing should not be interpreted as either compliance or noncompliance, particularly for a legacy PSoC 3 device.
Where to buy CY8C3866LTI-068 online and what is the lead time?
Use the Request a Quote form on this page to request CY8C3866LTI-068 availability, current lead time, and order confirmation. The manufacturer product page and distributor search results identify the part as an 8051 PSoC 3 with 64 KB flash in a 48-QFN package, while one listing describes it as in stock. Live quantity, package form, and lead time should be confirmed through the quote workflow before committing a production schedule.
How are programming and debug signals used on CY8C3866LTI-068?
Programming and debug signal assignments for CY8C3866LTI-068 are defined by the manufacturer pin-description table, including the multifunction pins discussed in Infineon Developer Community support material. Program the device through its supported PSoC programming and debug interface rather than assigning those signals as ordinary GPIO unless the application configuration explicitly permits it. Verify the exact connector, programming voltage, and signal multiplexing against the device documentation.

Data referensi kejuruteraan untuk CY8C3866LTI-068 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose CY8C3866LTI-068 when the board uses a tray-oriented assembly flow and the design requires the documented 8051 PSoC 3 architecture at up to 67 MHz, with 64 KB flash, 8 KB SRAM, a 20-bit ADC, and a 48-QFN package. CY8C3866LTI-068T is the preferred alternative for tape-and-reel assembly because it is directly compared as the same device family and retains the core architecture, clock rating, memory capacity, and package basis. CY8C3866LTI-030 is useful when its ordering suffix is acceptable and its exact package, temperature range, and lifecycle conditions match the design. No verified cross-brand pin-compatible alternative was established, so changing silicon families would require board-level redesign and firmware migration rather than a simple drop-in substitution.

Perbandingan dengan Gantian

Parametr Produk Ini CY8C3866LTI-068T CY8C3866LTI-030
Package 48-QFN (7 mm × 7 mm) 48-QFN (7 mm × 7 mm) 48-QFN (7 mm × 7 mm)
Brand Infineon Technologies Infineon Technologies Infineon Technologies
Processor Core 8051-compatible single core 8051-compatible single core 8051 core
Flash Memory 64 KB 64 KB 64 KB
Ordering or Shipping Form -068 tray form -068T tape-and-reel form -030 ordering suffix
Programmable Mixed-Signal Architecture PSoC 3 with configurable analog and digital blocks PSoC 3 with configurable analog and digital blocks PSoC 3 with configurable analog and digital blocks

Penyeberangsung Jelas

  • Direct same-package production alternative (vsCY8C3866LTI-068T)
  • High-resolution mixed-signal integration (vsCY8C3866LTI-030)
  • Compact 48-QFN implementation (vsCY8C3866LTI-068T)

Catatan Desain

Use the manufacturer 48-QFN land pattern and exposed-pad guidance when laying out the board. Place the required supply and decoupling capacitors close to their associated pins, keep the exposed-pad connection electrically and thermally compliant with the package documentation, and avoid high-current or high-speed routing beneath sensitive analog inputs. The target package is 7 mm × 7 mm, so assembly tolerances and the exposed-pad thermal path should be reviewed before fabrication.

Separate core and I/O supply requirements into the schematic and power-budget review. The listed supply range is 0.5 V to 5.5 V, while a related listing identifies a 1.7 V to 5.5 V I/O range; do not infer that every supply domain can operate at 0.5 V. Confirm sequencing, voltage tolerances, and decoupling requirements for each configured power rail in the manufacturer electrical-characteristics tables.

Do not treat multifunction pins as ordinary GPIO without checking the device configuration. Infineon Developer Community material identifies pins 7, 8, and 10 as multifunction in a PSoC 3 design context, illustrating how programming or debug functions can affect GPIO use. Assign signals from the manufacturer pin-description table and verify the final PSoC Creator configuration against the schematic to prevent boot, programming, or peripheral conflicts.

Keep analog acquisition paths away from switching nodes and high-current return paths, and provide a clean ground reference to the analog pins. Although the device has a 20-bit ADC, the usable result depends on reference quality, source impedance, acquisition timing, and board noise. Use short traces, suitable grounding, and external filtering or buffering when the sensor source cannot drive the ADC network directly.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance documents for the exact CY8C3866LTI-068 ordering code were not included in the available product information. Request the manufacturer material-declaration documents before making a compliance claim.

Pencarian Berhubungan

CY8C3866LTI-068 datasheet CY8C3866LTI-068 specifications CY8C3866LTI-068 pinout CY8C3866LTI-068 datasheet pdf Infineon CY8C3866LTI-068 CY8C3866LTI-068 equivalent CY8C3866LTI-068 replacement CY8C3866LTI-068 vs CY8C3866LTI-068T CY8C3866LTI-068 48-QFN CY8C3866LTI-068 price CY8C3866LTI-068 stock CY8C3866LTI-068 application circuit CY8C3866LTI-068 programming CY8C3866 67MHz 64KB flash CY8C3866LTI-068 20-bit ADC

Komponen dan Tanda berkaitan

Infineon Technologies Cypress Semiconductor CY8C3866LTI-068 CY8C3866LTI-068T CY8C3866LTI-030 PSoC 3 PSoC programmable system-on-chip 8051-compatible microcontroller 8-bit microcontroller mixed-signal MCU 20-bit ADC 67 MHz 64 KB flash 8 KB SRAM 1 KB EEPROM 8 KB ECC flash 48-QFN QFN package family surface mount industrial sensor controller building automation process control embedded data acquisition consumer appliance control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ