CY8C4014LQI-412 - 16MHz 16KB PSoC 4 MCU | Infineon
MPN: CY8C4014LQI-412 ✓ AktifCY8C4014LQI-412 Ringkasan
A PSoC is a programmable system-on-chip that combines a microcontroller core with configurable digital and analog peripherals on one integrated circuit. The CY8C4000 family belongs to the broader embedded-control hierarchy of Arm Cortex-M0 microcontroller, mixed-signal microcontroller, system-on-chip, and semiconductor. Its programmable peripherals can replace combinations of discrete GPIO, timer, counter, PWM, communications, and analog-interface components while conserving board area.
The CY8C4014LQI-412 combines a 16 MHz Arm Cortex-M0 processor with 16 KB of program flash, 2 KB of SRAM, and 20 general-purpose I/Os. The device supports 2.5 V, 3.3 V, and 5 V operating supplies according to the product listing. Its 24-QFN package measures 4 x 4 mm and includes an exposed pad, making the device suitable for compact, space-constrained control boards.
The 32-bit Cortex-M0 architecture provides efficient instruction processing for control tasks, while the PSoC programmable peripheral architecture allows digital functions to be implemented in hardware rather than relying exclusively on CPU software. The 16 KB flash capacity supports embedded firmware and configuration data, while the 2 KB SRAM accommodates working state, stack operations, and peripheral buffers. The 20 GPIOs provide interfaces for sensors, actuators, indicators, and external control signals.
Typical uses include compact industrial controllers, sensor-conditioning equipment, small motor-control systems, building-control nodes, low-cost instrumented products, and consumer devices with embedded user interfaces. Its small package and low pin count are especially useful when the PCB area is more constrained than the available flash or GPIO count.
PCB implementation requires attention to the exposed thermal pad, power and ground distribution, and the manufacturer’s recommended QFN land pattern. Place the decoupling network close to the supply pins, connect the exposed pad according to the package drawing, and verify that the selected PCB footprint matches the 24-QFN 4 x 4 mm geometry. Program the device with a PSoC-compatible development environment and verify peripheral configuration against the datasheet before production.
This page consolidates the manufacturer’s product specifications with package, sourcing, application, and replacement guidance for engineers evaluating the CY8C4014LQI-412. It also distinguishes the verified device configuration from less useful package-only alternatives and emphasizes firmware, footprint, and peripheral-compatibility checks that are essential when selecting a drop-in MCU replacement.
Pilihan pengganti yang segera untuk CY8C4014LQI-412 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera CY8C4014LQI-412 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Product Type, SRAM.
CY8C4014LQI-422
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →CY8C4014LQI-452
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
CY8C4014LQI-462
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
CY8C4014LQI-472
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
CY8C4014LQI-482
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
CY8C4014LQI-412 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 32-bit PSoC 4 mixed-signal microcontroller |
| Processor Core | Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 16 KB (16K x 8) |
| SRAM | 2 KB |
| General-Purpose I/O | 20 GPIOs |
| Supply Voltage Options | 2.5 V, 3.3 V, and 5 V |
| Suhu Operasi | -40°C to +85°C (TA) |
| Kemasan | 24-QFN (4 x 4 mm) |
| Package Type | 24-UFQFN with exposed pad |
| Kiraan Pin | 24 pins |
| Jenis Pemasangan | Surface mount |
| Delivery Package | Tray |
| Architecture | Programmable system-on-chip |
| Data Word Width | 32-bit |
| Status RoHS | Compliant |
Panduan Konfigurasi Pin CY8C4014LQI-412 tray
Konfigurasi pin untuk CY8C4014LQI-412 (tray pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk CY8C4014LQI-412.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
CY8C4014LQI-412 patut untuk 6 aplikasis: Industrial Sensor Controller, Compact Building-Control Node, Low-Cost Data Acquisition Module, Small Motor and Actuator Control, Connected Consumer Control Module, Educational and Rapid-Prototype Platform.
Industrial Sensor Controller
The CY8C4014LQI-412 fits compact industrial sensor-control modules that combine digital sensing, condition monitoring, and local actuator control. Its 16 MHz Arm Cortex-M0 core can execute acquisition sequencing and control logic, while the PSoC programmable peripherals can implement timers, counters, PWM, and communications functions without relying entirely on CPU polling. Twenty GPIOs provide practical connection capacity for sensors, limit switches, status LEDs, and relay or valve drivers. The 16 KB flash limit should be checked against the compiled firmware, and the 2 KB SRAM should be budgeted for stack, variables, and peripheral buffers. The 24-QFN 4 x 4 mm package supports dense boards, but the exposed pad requires a properly filled and connected land pattern.
Disebarkan
Compact Building-Control Node
The CY8C4014LQI-412 is suitable for distributed building-control nodes that monitor room, occupancy, or equipment signals and operate local outputs. The 20 GPIOs support discrete inputs, alarm indicators, and actuator-control signals, while programmable timers and counters can reduce CPU overhead for periodic sampling and debounce handling. Its Cortex-M0 core provides enough performance for supervisory logic, status reporting, and coordinated startup. A 2.5 V, 3.3 V, or 5 V operating option can simplify interface selection, although the complete power tree still requires regulation and filtering. The small 24-QFN footprint helps when the node must fit into a small enclosure, while the -40°C to +85°C ambient rating supports typical indoor and equipment-room environments.
Disebarkan
Low-Cost Data Acquisition Module
The CY8C4014LQI-412 can serve as the control core of a compact data-acquisition module that samples sensors, timestamps events, and forwards summarized information. Its configurable PSoC peripherals can implement counters, timers, PWM, serial interfaces, and programmable digital blocks, reducing the processing burden on the 16 MHz CPU. Sixteen kilobytes of flash is adequate for a focused acquisition application with a small firmware image, while the 2 KB SRAM imposes a clear limit on concurrent buffers and complex processing stacks. Engineers should verify that the required converter and sensor interfaces map to the available peripheral resources, and should avoid designs that require large local logging or high-bandwidth signal capture beyond the device’s 16 KB code and data capacity.
Disebarkan
Small Motor and Actuator Control
The CY8C4014LQI-412 can control small motors and actuators in cost-sensitive equipment where a compact MCU, configurable timing, and PWM resources are more valuable than substantial processing memory. Its programmable timer and counter blocks can generate deterministic control waveforms, while the 20 GPIOs handle limit sensors, direction signals, and fault inputs. The Cortex-M0 core can supervise motion limits, update operating state, and coordinate actuator transitions. Because this is a general-purpose mixed-signal MCU rather than a dedicated motor-driver IC, external transistor or MOSFET stages remain necessary and must be sized for the load. Confirm that the configured PWM frequency, timing resolution, and pin assignments satisfy the mechanical requirements before production release.
Disebarkan
Connected Consumer Control Module
The CY8C4014LQI-412 fits small consumer-control modules that combine local buttons, indicators, sensors, and a serial communications link in a space-constrained enclosure. Programmable PSoC peripherals allow GPIO, counters, timers, and serial functions to be assigned according to the final product configuration, while the Cortex-M0 core runs user-interface logic and device-state management. The 24-QFN 4 x 4 mm package and 20 GPIOs are useful for wearable-adjacent accessories and compact home devices, although 16 KB of flash and 2 KB of SRAM limit application complexity. Firmware size, stack depth, and any display or wireless-control buffering must therefore be reviewed early. The 3.3 V option aligns with many low-voltage digital interfaces, subject to the complete power-budget analysis.
Disebarkan
Educational and Rapid-Prototype Platform
The CY8C4014LQI-412 is well suited to embedded-systems education and rapid prototyping because it integrates a recognizable Arm Cortex-M0 core with PSoC programmable peripherals in a small 24-QFN package. Students can learn GPIO control, timers, counters, PWM generation, serial communication, and basic mixed-signal signal routing while keeping the hardware compact. The 16 MHz clock and 16 KB flash make the device approachable for focused demonstrations, although production-like networking, large data storage, and graphic interfaces may exceed its memory budget. A prototype board should preserve the manufacturer’s exposed-pad and decoupling recommendations so that firmware behavior is not confused by unstable supply voltage or poor signal integrity.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk CY8C4014LQI-412 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | CY8C4014LQI-422 | CY8C4014LQI-452 | CY8C4014LQI-462 | CY8C4014LQI-472 | CY8C4014LQI-482 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) |
Penyeberangsung Jelas
- Compact programmable mixed-signal integration (vsCY8C4014LQI-422)
- 20 GPIO connections within a 24-QFN footprint (vsCY8C4014LQI-452)
- Three listed supply-voltage options (vsCY8C4014LQI-462)
- Industrial ambient-temperature operation (vsCY8C4014LQI-472)
Catatan Desain
Use the manufacturer’s 24-QFN land pattern and verify the exposed-pad geometry before releasing artwork. Place input and bulk decoupling capacitors adjacent to the appropriate supply and ground pins, provide a low-impedance ground plane, and fill or connect the exposed thermal pad as specified by the package drawing. The exposed pad is part of both thermal management and electrical grounding, so a nominally correct pad array with an incorrectly connected center pad can cause instability or excessive heating.
Design the 2.5 V, 3.3 V, or 5 V supply path around the exact operating mode and peripheral configuration used in firmware. PSoC peripherals and I/O activity can change dynamic current, so the regulator should have adequate margin for the worst-case enabled state rather than only the reset state. Keep sensitive analog and digital return paths coordinated, use local high-frequency bypass capacitors, and measure supply ripple and startup behavior on the assembled board.
Assign peripherals to pins before finalizing the PCB because programmable I/O assignments can alter the optimal placement of communication, timer, and analog-capable pins. Preserve the exposed-pad thermal and ground path, avoid routing high-current outputs beneath sensitive analog inputs, and maintain consistent return paths for communications interfaces. Compare the programmed pin map with the package pin table during design review, especially when reusing a footprint from another board revision.
Do not treat CY8C4014LQI-412 and CY8C4014LQI-412T as interchangeable order codes: the former is identified with tray packaging in the verified listing, while the latter is the tape-and-reel ordering variant. Likewise, do not approve a same-family suffix solely because its QFN dimensions match. Confirm clock grade, temperature grade, memory, qualification, peripheral resources, pin table, exposed-pad connection, and firmware configuration before substitution.
Keep clock, programming, and communication traces short and route them away from switching nodes and motor-drive stages. PSoC external inputs may be sensitive to ringing, coupling, and threshold violations even when the MCU operates at a modest 16 MHz. Use series termination where driver edges are fast, provide a continuous ground reference under high-speed routes, and validate signal integrity with an oscilloscope at the device pins rather than relying only on source-end measurements.
Maklumat Kesediaan
RoHS compliance is identified in the component and assembly listing. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification details were not confirmed.