Infineon

CY8C4014LQI-412 - 16MHz 16KB PSoC 4 MCU | Infineon

Артикул: CY8C4014LQI-412 ✓ Активен
2.5 V, 3.3 V, and 5 V Vdss 24-QFN (4 x 4 mm) Package 16 MHz Speed 16 KB (16K x 8) Memory
MOQ: 1 |

CY8C4014LQI-412 Обзор

Infineon Technologies CY8C4014LQI-412 is a 32-bit Arm Cortex-M0 PSoC 4 system-on-chip microcontroller operating up to 16 MHz, with 16 KB of flash memory, 2 KB of SRAM, 20 GPIOs, and a 24-QFN 4 x 4 mm package.

A PSoC is a programmable system-on-chip that combines a microcontroller core with configurable digital and analog peripherals on one integrated circuit. The CY8C4000 family belongs to the broader embedded-control hierarchy of Arm Cortex-M0 microcontroller, mixed-signal microcontroller, system-on-chip, and semiconductor. Its programmable peripherals can replace combinations of discrete GPIO, timer, counter, PWM, communications, and analog-interface components while conserving board area.

The CY8C4014LQI-412 combines a 16 MHz Arm Cortex-M0 processor with 16 KB of program flash, 2 KB of SRAM, and 20 general-purpose I/Os. The device supports 2.5 V, 3.3 V, and 5 V operating supplies according to the product listing. Its 24-QFN package measures 4 x 4 mm and includes an exposed pad, making the device suitable for compact, space-constrained control boards.

The 32-bit Cortex-M0 architecture provides efficient instruction processing for control tasks, while the PSoC programmable peripheral architecture allows digital functions to be implemented in hardware rather than relying exclusively on CPU software. The 16 KB flash capacity supports embedded firmware and configuration data, while the 2 KB SRAM accommodates working state, stack operations, and peripheral buffers. The 20 GPIOs provide interfaces for sensors, actuators, indicators, and external control signals.

Typical uses include compact industrial controllers, sensor-conditioning equipment, small motor-control systems, building-control nodes, low-cost instrumented products, and consumer devices with embedded user interfaces. Its small package and low pin count are especially useful when the PCB area is more constrained than the available flash or GPIO count.

PCB implementation requires attention to the exposed thermal pad, power and ground distribution, and the manufacturer’s recommended QFN land pattern. Place the decoupling network close to the supply pins, connect the exposed pad according to the package drawing, and verify that the selected PCB footprint matches the 24-QFN 4 x 4 mm geometry. Program the device with a PSoC-compatible development environment and verify peripheral configuration against the datasheet before production.

This page consolidates the manufacturer’s product specifications with package, sourcing, application, and replacement guidance for engineers evaluating the CY8C4014LQI-412. It also distinguishes the verified device configuration from less useful package-only alternatives and emphasizes firmware, footprint, and peripheral-compatibility checks that are essential when selecting a drop-in MCU replacement.

Аналоги без доработки для CY8C4014LQI-412 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с CY8C4014LQI-412 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Product Type, SRAM.

Infineon
Flash Memory: 16 kByte
Product Type: PSoC 4 programmable system-on-chip microcontroller
SRAM: 2 kByte
Сравнить с CY8C4014LQI-412 →

CY8C4014LQI-422

✅ Прямая замена ⚠️ Характеристики не проверены
Infineon
📦 24-QFN (4 x 4 mm)
PSoC 4 programmable system-on-chip microcontroller · PSoC 4000 / CY8C4000 · 32-bit Arm Cortex-M0 · 16 MHz · 16 kByte · 16K x 8 bits · 2 kByte · 20 pins

Уточнить цену

Открыть даташит →

CY8C4014LQI-452

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-QFN (4 x 4 mm)
Same CY8C4014 family and 24-QFN footprint; suffix-dependent device characteristics require manufacturer verification

📋 Справочный аналог (нет в каталоге)

CY8C4014LQI-462

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-QFN (4 x 4 mm)
Same CY8C4014 family and 24-QFN footprint; suffix-dependent speed or qualification parameters require verification

📋 Справочный аналог (нет в каталоге)

CY8C4014LQI-472

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-QFN (4 x 4 mm)
Same CY8C4014 family and 24-QFN footprint; confirm ordering-code attributes before substitution

📋 Справочный аналог (нет в каталоге)

CY8C4014LQI-482

✅ Прямая замена ⚠️ Характеристики не проверены
📦 24-QFN (4 x 4 mm)
Same CY8C4014 family and 24-QFN footprint; manufacturer ordering documentation controls the exact suffix differences

📋 Справочный аналог (нет в каталоге)

CY8C4014LQI-412 Максимальные параметры и электрические характеристики

Product Type 32-bit PSoC 4 mixed-signal microcontroller
Processor Core Arm Cortex-M0
Maximum CPU Frequency 16 MHz
Flash Memory 16 KB (16K x 8)
SRAM 2 KB
General-Purpose I/O 20 GPIOs
Supply Voltage Options 2.5 V, 3.3 V, and 5 V
Рабочая температура -40°C to +85°C (TA)
Корпус 24-QFN (4 x 4 mm)
Package Type 24-UFQFN with exposed pad
Число выводов 24 pins
Тип монтажа Surface mount
Delivery Package Tray
Architecture Programmable system-on-chip
Data Word Width 32-bit
Статус RoHS Compliant

Руководство по цоколевке CY8C4014LQI-412 в корпусе tray

Цоколевка для CY8C4014LQI-412 (корпус tray). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса tray для CY8C4014LQI-412

Нет подробных данных о распиновке для CY8C4014LQI-412.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

CY8C4014LQI-412 подходит для 6 применениеs: Industrial Sensor Controller, Compact Building-Control Node, Low-Cost Data Acquisition Module, Small Motor and Actuator Control, Connected Consumer Control Module, Educational and Rapid-Prototype Platform.

🏭

Industrial Sensor Controller

The CY8C4014LQI-412 fits compact industrial sensor-control modules that combine digital sensing, condition monitoring, and local actuator control. Its 16 MHz Arm Cortex-M0 core can execute acquisition sequencing and control logic, while the PSoC programmable peripherals can implement timers, counters, PWM, and communications functions without relying entirely on CPU polling. Twenty GPIOs provide practical connection capacity for sensors, limit switches, status LEDs, and relay or valve drivers. The 16 KB flash limit should be checked against the compiled firmware, and the 2 KB SRAM should be budgeted for stack, variables, and peripheral buffers. The 24-QFN 4 x 4 mm package supports dense boards, but the exposed pad requires a properly filled and connected land pattern.

🏠

Compact Building-Control Node

The CY8C4014LQI-412 is suitable for distributed building-control nodes that monitor room, occupancy, or equipment signals and operate local outputs. The 20 GPIOs support discrete inputs, alarm indicators, and actuator-control signals, while programmable timers and counters can reduce CPU overhead for periodic sampling and debounce handling. Its Cortex-M0 core provides enough performance for supervisory logic, status reporting, and coordinated startup. A 2.5 V, 3.3 V, or 5 V operating option can simplify interface selection, although the complete power tree still requires regulation and filtering. The small 24-QFN footprint helps when the node must fit into a small enclosure, while the -40°C to +85°C ambient rating supports typical indoor and equipment-room environments.

📊

Low-Cost Data Acquisition Module

The CY8C4014LQI-412 can serve as the control core of a compact data-acquisition module that samples sensors, timestamps events, and forwards summarized information. Its configurable PSoC peripherals can implement counters, timers, PWM, serial interfaces, and programmable digital blocks, reducing the processing burden on the 16 MHz CPU. Sixteen kilobytes of flash is adequate for a focused acquisition application with a small firmware image, while the 2 KB SRAM imposes a clear limit on concurrent buffers and complex processing stacks. Engineers should verify that the required converter and sensor interfaces map to the available peripheral resources, and should avoid designs that require large local logging or high-bandwidth signal capture beyond the device’s 16 KB code and data capacity.

⚡

Small Motor and Actuator Control

The CY8C4014LQI-412 can control small motors and actuators in cost-sensitive equipment where a compact MCU, configurable timing, and PWM resources are more valuable than substantial processing memory. Its programmable timer and counter blocks can generate deterministic control waveforms, while the 20 GPIOs handle limit sensors, direction signals, and fault inputs. The Cortex-M0 core can supervise motion limits, update operating state, and coordinate actuator transitions. Because this is a general-purpose mixed-signal MCU rather than a dedicated motor-driver IC, external transistor or MOSFET stages remain necessary and must be sized for the load. Confirm that the configured PWM frequency, timing resolution, and pin assignments satisfy the mechanical requirements before production release.

📱

Connected Consumer Control Module

The CY8C4014LQI-412 fits small consumer-control modules that combine local buttons, indicators, sensors, and a serial communications link in a space-constrained enclosure. Programmable PSoC peripherals allow GPIO, counters, timers, and serial functions to be assigned according to the final product configuration, while the Cortex-M0 core runs user-interface logic and device-state management. The 24-QFN 4 x 4 mm package and 20 GPIOs are useful for wearable-adjacent accessories and compact home devices, although 16 KB of flash and 2 KB of SRAM limit application complexity. Firmware size, stack depth, and any display or wireless-control buffering must therefore be reviewed early. The 3.3 V option aligns with many low-voltage digital interfaces, subject to the complete power-budget analysis.

🧩

Educational and Rapid-Prototype Platform

The CY8C4014LQI-412 is well suited to embedded-systems education and rapid prototyping because it integrates a recognizable Arm Cortex-M0 core with PSoC programmable peripherals in a small 24-QFN package. Students can learn GPIO control, timers, counters, PWM generation, serial communication, and basic mixed-signal signal routing while keeping the hardware compact. The 16 MHz clock and 16 KB flash make the device approachable for focused demonstrations, although production-like networking, large data storage, and graphic interfaces may exceed its memory budget. A prototype board should preserve the manufacturer’s exposed-pad and decoupling recommendations so that firmware behavior is not confused by unstable supply voltage or poor signal integrity.

What are the key specifications of CY8C4014LQI-412 that engineers should know?
The CY8C4014LQI-412 is a 32-bit Arm Cortex-M0 PSoC 4 microcontroller with a 16 MHz maximum clock, 16 KB of flash, 2 KB of SRAM, and 20 GPIOs in a 24-QFN 4 x 4 mm package. According to the Infineon product page, the device belongs to the CY8C4000 family and supports compact embedded control applications. The listed supply-voltage options are 2.5 V, 3.3 V, and 5 V, while the industrial operating range is -40°C to +85°C. Its combination of programmable peripherals, integrated SRAM, and a compact exposed-pad package makes footprint and firmware configuration the two most important compatibility checks when evaluating it for a new design.
Where can I download the CY8C4014LQI-412 datasheet PDF?
The official CY8C4014LQI-412 documentation is available through the Infineon product page and the manufacturer datasheet linked from that page. The device is also cataloged by Cypress Semiconductor, its original manufacturer. Use the pin-description table, electrical characteristics, package drawing, and ordering-information sections to confirm the 24-QFN footprint, exposed-pad connection, supply limits, and temperature grade. The manufacturer datasheet is the controlling document for programming, clocking, peripherals, and PCB implementation; distributor-hosted copies should be treated as secondary references.
Where can I find the CY8C4014LQI-412 pinout?
The CY8C4014LQI-412 pinout is published in the manufacturer datasheet as a 24-QFN package pin-description table and land-pattern drawing. The verified package is 24-UFQFN, 4 x 4 mm, with an exposed pad. Use the pin table to assign supply, ground, programming, reset, and general-purpose I/O functions because peripheral routing is programmable within the PSoC architecture. The exposed pad normally forms part of the board-level ground and thermal design and must be connected according to the package drawing rather than treated as an unused pin.
What is CY8C4014LQI-412 used for?
The CY8C4014LQI-412 is used for compact embedded-control systems that benefit from programmable peripherals and a small package. Typical uses include industrial sensor controllers, compact instrument interfaces, building-control nodes, low-power consumer products, and small actuator-control boards. Its 16 MHz Arm Cortex-M0 core handles firmware and supervisory logic, while 20 GPIOs connect digital sensors, indicators, and actuators. The 16 KB flash and 2 KB SRAM make it most appropriate for tightly scoped embedded workloads rather than gateway-class applications requiring substantial local data storage.
How much flash and SRAM does the CY8C4014LQI-412 have?
The CY8C4014LQI-412 provides 16 KB of flash memory and 2 KB of SRAM. The Infineon product page identifies the device as a CY8C4000 PSoC with 16 kByte of flash and 2 kByte of SRAM, and distributor technical listings repeat the 16K x 8 flash organization. Flash is intended primarily for firmware and nonvolatile configuration data, while SRAM supports stack, variables, and active peripheral buffers. Size the final firmware against the 16 KB limit and avoid designs requiring larger buffers or extensive runtime libraries.
Is the CY8C4014LQI-412 suitable for industrial temperature applications?
The CY8C4014LQI-412 is suitable for industrial-temperature designs within its specified -40°C to +85°C ambient range. The CY8C4000 family designation and industrial ordering code support use in industrial control, instrumentation, and building-automation equipment. Temperature suitability should still be evaluated at the system level because regulator dissipation, enclosure temperature, and nearby heat sources can raise the PCB temperature above ambient. The manufacturer package and electrical specifications remain the basis for the final thermal assessment.
Where can I buy CY8C4014LQI-412 online?
The CY8C4014LQI-412 can be requested through the Request a Quote form on this product page. Enter the exact ordering code CY8C4014LQI-412 to avoid confusing it with the tape-and-reel suffix CY8C4014LQI-412T. The request should specify the required quantity, tray packaging requirement, and intended shipment destination. The form is the appropriate route for current commercial availability, lot-related sourcing conditions, and a quotation tied to the exact MPN.
What is the price of CY8C4014LQI-412?
The current commercial price for CY8C4014LQI-412 should be obtained through the Request a Quote form on this page. The form accepts the exact MPN and requested quantity, allowing the quotation to reflect the correct package and order configuration without confusing it with the -412T tape-and-reel ordering code. For production planning, request the quantity break, current lead time, and any date-code or traceability requirements at the same time.
What is the lead time for CY8C4014LQI-412?
The current lead time for CY8C4014LQI-412 should be confirmed through the Request a Quote form on this page. Include your requested quantity, approved vendor list, target date, and whether tray packaging is required. Lead time can vary with order quantity, inventory position, and supply-chain conditions, so a schedule should be based on the supplier’s response for the exact ordering code rather than on generic catalog assumptions. Planning for CY8C4014LQI-412T is not equivalent because it is a different packaging suffix.
Is CY8C4014LQI-412 in stock?
Current stock for CY8C4014LQI-412 should be checked through the Request a Quote form on this page. State the required quantity and packaging format so the response can identify the exact -412 tray ordering code rather than a tape-and-reel variant. Verified product listings show active manufacturer and distributor catalog references, but a catalog listing alone does not confirm current inventory. The quotation response is the appropriate source for allocation, lead time, and lot traceability.
CY8C4014LQI-412 vs CY8C4014LQI-422 - which is better for a new design?
CY8C4014LQI-422 is the relevant same-family candidate to compare against CY8C4014LQI-412, but the correct choice depends on its documented ordering parameters. Both belong to the CY8C4014 PSoC 4000 family and should be evaluated for the same 24-QFN footprint and required peripheral configuration. According to the Infineon product documentation, the ordering code controls device-specific characteristics, so compare clock, memory, temperature, package, and qualification details rather than assuming the final three digits are interchangeable. A drop-in decision also requires reviewing the firmware configuration, pin table, and exposed-pad layout.
What is the difference between CY8C4014LQI-412 and CY8C4014LQI-422?
CY8C4014LQI-412 and CY8C4014LQI-422 are closely related CY8C4014 PSoC 4 devices, but the suffix must be decoded from the manufacturer ordering documentation before interchange is approved. The verified CY8C4014LQI-412 configuration is a 16 MHz Arm Cortex-M0 device with 16 KB flash, 2 KB SRAM, 20 GPIOs, and a 24-QFN package. Review the CY8C4014LQI-422 datasheet for any changed speed grade, temperature grade, qualification, or ordering attributes. Both the footprint and firmware-supported configuration must match before treating either part as a direct replacement.
When should I choose CY8C4014LQI-412 over another PSoC 4 microcontroller?
Choose CY8C4014LQI-412 when the design requires the documented combination of a 16 MHz Arm Cortex-M0 core, 16 KB flash, 2 KB SRAM, 20 GPIOs, and a 24-QFN 4 x 4 mm footprint. It is particularly suitable for compact control boards whose firmware fits within 16 KB and whose analog, timer, counter, or PWM requirements can be assigned through the PSoC peripheral architecture. Select a different family member when greater memory, more GPIO, a larger package, a different temperature range, or another qualification grade is required. Footprint matching alone is insufficient because firmware and peripheral capabilities must also be verified.
Is CY8C4014LQI-412 suitable for a compact sensor-control board?
The CY8C4014LQI-412 is suitable for a compact sensor-control board that operates from a 2.5 V, 3.3 V, or 5 V supply and fits within a 24-QFN 4 x 4 mm footprint. Its 20 GPIOs can connect digital sensors, switches, status indicators, and actuator drivers, while the Cortex-M0 processor runs control firmware and the PSoC peripherals implement timing and signal functions. The principal constraint is the 16 KB flash limit, which should be checked against the compiled firmware size. Analog sensor conditioning requirements should also be matched to the device’s documented peripheral resources.
What can replace CY8C4014LQI-412?
A true replacement for CY8C4014LQI-412 must match the 24-QFN footprint, exposed-pad arrangement, pin functions, supply range, clock rating, memory capacity, temperature grade, and required PSoC peripheral resources. Same-family ordering variants are the safest candidates because firmware and board changes are less likely, but every suffix must be checked against the manufacturer ordering table. Cross-brand devices should be treated as redesign candidates unless the manufacturer explicitly documents pin-to-pin compatibility. The -412T version differs only in delivery format and is not a distinct board-level substitute.
Is CY8C4014LQI-412 the same as CY8C4014LQI-412T?
No. CY8C4014LQI-412 and CY8C4014LQI-412T refer to different ordering formats for the PSoC 4 device family: the listed -412 part uses tray packaging, while the -412T ordering code is associated with tape-and-reel packaging. Their shared electrical family does not make them identical MPNs, and automated purchasing should not substitute one suffix for the other. If a PCB design requires the same device functionality and exposed-pad footprint, both may be assembly-compatible, but the exact order code must match the requested manufacturing and packing method.
What is the best Infineon equivalent for CY8C4014LQI-412?
The closest Infineon alternatives are same-family CY8C4014 ordering variants that retain the 24-QFN package and match the required electrical configuration. No cross-brand MCU should be called a drop-in equivalent without an explicit pin-compatibility statement because peripheral mappings, programming models, and exposed-pad assignments can differ even when the package dimensions match. Use the manufacturer ordering table to compare suffix attributes, then verify the pin description table and device configuration in the PSoC development environment. For production continuity, exact MPN continuity is preferable to an undocumented cross-brand substitution.

Справочные инженерные данные для CY8C4014LQI-412 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose CY8C4014LQI-412 for a compact control design that fits within 16 KB of flash and 2 KB of SRAM, needs up to 20 GPIOs, and benefits from configurable PSoC peripherals in a 24-QFN 4 x 4 mm footprint. Its 16 MHz Cortex-M0 core and listed 2.5 V, 3.3 V, or 5 V operation are suitable for embedded industrial, building-control, sensor-node, and actuator-control products. The same-family alternatives may offer a better fit when their suffix provides a required clock, temperature, qualification, or ordering option, but each must be checked against the manufacturer ordering table. Do not select a variant solely because its package name matches. Avoid generic cross-brand substitutions unless pin assignments, peripheral resources, memory, firmware model, and exposed-pad construction are explicitly compatible. The -412T ordering code is reserved for tape-and-reel procurement and is not included as a distinct drop-in alternative.

Сравнение с аналогами

Параметр Этот товар CY8C4014LQI-422 CY8C4014LQI-452 CY8C4014LQI-462 CY8C4014LQI-472 CY8C4014LQI-482
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm) 24-QFN (4 x 4 mm)

Ключевые отличия

  • Compact programmable mixed-signal integration (против CY8C4014LQI-422)
  • 20 GPIO connections within a 24-QFN footprint (против CY8C4014LQI-452)
  • Three listed supply-voltage options (против CY8C4014LQI-462)
  • Industrial ambient-temperature operation (против CY8C4014LQI-472)

Заметки по проектированию

Use the manufacturer’s 24-QFN land pattern and verify the exposed-pad geometry before releasing artwork. Place input and bulk decoupling capacitors adjacent to the appropriate supply and ground pins, provide a low-impedance ground plane, and fill or connect the exposed thermal pad as specified by the package drawing. The exposed pad is part of both thermal management and electrical grounding, so a nominally correct pad array with an incorrectly connected center pad can cause instability or excessive heating.

Design the 2.5 V, 3.3 V, or 5 V supply path around the exact operating mode and peripheral configuration used in firmware. PSoC peripherals and I/O activity can change dynamic current, so the regulator should have adequate margin for the worst-case enabled state rather than only the reset state. Keep sensitive analog and digital return paths coordinated, use local high-frequency bypass capacitors, and measure supply ripple and startup behavior on the assembled board.

Assign peripherals to pins before finalizing the PCB because programmable I/O assignments can alter the optimal placement of communication, timer, and analog-capable pins. Preserve the exposed-pad thermal and ground path, avoid routing high-current outputs beneath sensitive analog inputs, and maintain consistent return paths for communications interfaces. Compare the programmed pin map with the package pin table during design review, especially when reusing a footprint from another board revision.

Do not treat CY8C4014LQI-412 and CY8C4014LQI-412T as interchangeable order codes: the former is identified with tray packaging in the verified listing, while the latter is the tape-and-reel ordering variant. Likewise, do not approve a same-family suffix solely because its QFN dimensions match. Confirm clock grade, temperature grade, memory, qualification, peripheral resources, pin table, exposed-pad connection, and firmware configuration before substitution.

Keep clock, programming, and communication traces short and route them away from switching nodes and motor-drive stages. PSoC external inputs may be sensitive to ringing, coupling, and threshold violations even when the MCU operates at a modest 16 MHz. Use series termination where driver edges are fast, provide a continuous ground reference under high-speed routes, and validate signal integrity with an oscilloscope at the device pins rather than relying only on source-end measurements.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

RoHS compliance is identified in the component and assembly listing. REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification details were not confirmed.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

CY8C4014LQI-412 CY8C4014LQI-412 datasheet cy8c4014lqi 422 datasheet CY8C4014LQI datasheet pdf CY8C4014LQI-412 pinout CY8C4014LQI-412 footprint CY8C4014LQI-412 equivalent CY8C4014LQI-412 replacement CY8C4014LQI-412 price CY8C4014LQI-412 stock Infineon CY8C4014LQI-412 CY8C4014 24-QFN pinout CY8C4014LQI-412 sensor controller CY8C4014LQI-412 vs CY8C4014LQI-422

Связанные компоненты & термины

Infineon Technologies Cypress Semiconductor CY8C4014LQI-412 CY8C4014LQI-422 CY8C4014LQI-452 CY8C4014LQI-462 CY8C4014LQI-472 CY8C4014LQI-482 Arm Cortex-M0 PSoC 4 PSoC 4000 microcontroller mixed-signal microcontroller system-on-chip embedded control programmable peripheral 24-QFN 24-UFQFN QFN family surface-mount package 16 KB flash 2 KB SRAM 20 GPIO industrial sensor controller
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ