Silicon Labs

EFM32TG822F32-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs

MPN: EFM32TG822F32-D-QFP48 ✓ Aktif
1.98 V to 3.8 V Vdss 0.6 µA Id 48-pin TQFP (7 mm x 7 mm) Package 32 MHz Speed 32 KB Memory
MOQ: 1 |

EFM32TG822F32-D-QFP48 Ringkasan

The Silicon Labs EFM32TG822F32-D-QFP48 is a 32-bit ARM Cortex-M3 Tiny Gecko microcontroller operating up to 32 MHz, with 32 KB of Flash memory, 4 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package measuring 7 mm by 7 mm.

A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and I/O within one compact device. The EFM32TG belongs to the Tiny Gecko family of 32-bit microcontrollers, a low-power product line within the broader ARM Cortex-M microcontroller and embedded-processor hierarchy. Its architecture combines conventional CPU execution with energy-conscious peripherals and low-power operating modes for embedded control, sensing, communications, and portable products.

The device provides a 32-bit ARM Cortex-M3 processor with a maximum clock frequency of 32 MHz. Its 32 KB Flash memory supports firmware storage, while 4 KB of RAM provides working memory for application data and stack operations. The peripheral set includes two 16-bit timers, 37 digital I/O pins, AES capability, and an LCD-oriented variant within the Tiny Gecko family, making the MCU suitable for compact control systems that require more processing capability than an 8-bit microcontroller.

Silicon Labs emphasizes low-power operation in the EFM32TG platform. The published device literature identifies consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. These figures support duty-cycled designs in which the processor spends most of its operating time sleeping and wakes only to acquire measurements, update an interface, or perform control actions. Fast wake-up behavior can further reduce the energy cost of periodic sensing.

Typical uses include battery-powered sensor nodes, industrial condition-monitoring devices, compact instrumentation, low-power control panels, connected peripheral equipment, and embedded products with LCD or small user interfaces. The 32 MHz processor supports responsive control and protocol handling, while the autonomous low-energy approach reduces the need to keep the core active continuously.

PCB implementation should follow the manufacturer’s QFP-48 land pattern and pin-description tables. Confirm decoupling, programming access, oscillator routing, reset behavior, and exposed analog functions against the datasheet before layout. Firmware development should use the compatible EFM32 software tooling and device support package rather than assuming that a generic Cortex-M board definition maps every peripheral identically.

This page consolidates the confirmed 32 MHz performance, memory configuration, package details, low-power characteristics, sourcing information, replacement analysis, and practical design considerations into a focused engineering reference for EFM32TG822F32-D-QFP48 evaluation.

Pilihan pengganti yang segera untuk EFM32TG822F32-D-QFP48 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera EFM32TG822F32-D-QFP48 (sama faktor bentuk dan kaki) — berbeza dalam Package, Digital I/O Pins, Flash Memory, Product Type, Supply Voltage Range.

Silicon Labs
Package: 48-TQFP (7 x 7 mm)
Digital I/O Pins: 37
Flash Memory: 16 kB
Bandingkan Dengan EFM32TG822F32-D-QFP48 →
Silicon Labs
Package: 48-pin TQFP, 7 x 7 mm
Digital I/O Pins: 37
Product Type: ARM Cortex-M3 Microcontroller
Bandingkan Dengan EFM32TG822F32-D-QFP48 →
Silicon Labs
Package: 48-TQFP, 7 x 7 mm
Supply Voltage Range: 1.85 V to 3.8 V
Bandingkan Dengan EFM32TG822F32-D-QFP48 →

EFM32TG822F32-QFP48

✅ Masuk Drop-In
Silicon Labs
📦 48-TQFP (7 mm x 7 mm)
ARM Cortex-M3 Microcontroller · ARM Cortex-M3 · 32 MHz · 32-bit · 32 KB · 4 KB · 37 · 2 x 16-bit

Hubungi untuk harga

Lihat Datasheet →

EFM32TG822F32-QFP48T

✅ Masuk Drop-In
Silicon Labs
📦 48-TQFP (7 mm x 7 mm)
32-bit ARM Cortex-M3 microcontroller · 32 MHz · 32 kB · 4 kB · 37 pins · 2 x 16-bit timers · 1.85 V to 3.8 V · 0.6 uA minimum

Hubungi untuk harga

Lihat Datasheet →

EFM32TG822F32-D-QFP48 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M3 microcontroller
Product Family EFM32 Tiny Gecko
Processor Core ARM Cortex-M3
CPU Architecture 32-bit
Maximum CPU Frequency 32 MHz
Flash Memory 32 KB
RAM Memory 4 KB
Digital I/O Pins 37 pins
Timers 2 x 16-bit timers
Supply Voltage Range 1.98 V to 3.8 V
Stop Mode Current 0.6 µA
Run Mode Current 150 µA/MHz
Security Feature AES hardware acceleration
Kemasan 48-pin TQFP (7 mm x 7 mm)
Jenis Pemasangan Surface mount
Configurable Peripheral I/O Locations Up to 68

Panduan Konfigurasi Pin EFM32TG822F32-D-QFP48 48-pin tqfp (7 mm x 7 mm)

Konfigurasi pin untuk EFM32TG822F32-D-QFP48 (48-pin tqfp (7 mm x 7 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 48-pin tqfp (7 mm x 7 mm) untuk EFM32TG822F32-D-QFP48

Tiada data garisan pin yang diperoleh untuk EFM32TG822F32-D-QFP48.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

EFM32TG822F32-D-QFP48 patut untuk 6 aplikasis: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Compact LCD Control Panels, Low-Power Connected Peripherals, Portable Test and Measurement, Energy-Sensitive Embedded Products.

🧩

Battery-Powered Sensor Nodes

The EFM32TG822F32-D-QFP48 fits battery-powered sensor nodes that periodically acquire measurements and then return to a low-power state. Its 32 MHz ARM Cortex-M3 core provides enough processing capability for filtering, local calculations, and protocol handling, while the 4 KB RAM supports short control tasks. Published power figures of 0.6 µA in Stop mode and 150 µA/MHz in Run mode make duty-cycled operation practical. Configure peripherals for intermittent sensing and use the EFM32 low-energy tools to reduce wake-up and processing overhead.

🏭

Industrial Condition Monitoring

The EFM32TG822F32-D-QFP48 is suitable for industrial condition-monitoring modules that combine digital sensors with local threshold logic and communications. The 37 digital I/O pins support discrete inputs, status indicators, and peripheral control, while two 16-bit timers can support periodic sampling or timing functions. A 32 MHz Cortex-M3 core can preprocess vibration, temperature, or flow-related signals without requiring a host processor. Its low-power modes are valuable in installations where the monitor spends long intervals between events.

📺

Compact LCD Control Panels

The EFM32TG822F32-D-QFP48 supports compact LCD-oriented control panels and human-interface modules where a 32-bit core is useful without requiring a high-performance application processor. Its 32 KB Flash stores firmware and interface resources, while 4 KB RAM supports display updates and input state. The 37 digital I/O pins leave room for segment or button signals, depending on the selected LCD interface configuration. Design the firmware around the EFM32 display peripherals and verify timing and multiplexing requirements in the manufacturer datasheet.

🌐

Low-Power Connected Peripherals

The EFM32TG822F32-D-QFP48 can serve as the embedded controller in a low-power connected peripheral, such as a compact asset tracker, environmental monitor, or maintenance sensor. The 32-bit Cortex-M3 processor can execute communication stacks and application logic, and AES hardware acceleration supports security-sensitive data handling. Stop-mode operation helps reduce energy use between transmissions, while fast wake-up supports responsive user or network events. The 1.98 V to 3.8 V operating range should be reconciled with the radio and power-supply design.

🔧

Portable Test and Measurement

The EFM32TG822F32-D-QFP48 is appropriate for portable test and measurement products that combine sampling control, local display, and data logging. Two 16-bit timers provide useful timing resources for measurement sequencing or input capture, while 37 digital I/O pins support instrument controls. Its low-power architecture favors handheld or field instruments that operate for extended periods away from mains power. Confirm analog measurement requirements separately, since the available device information does not establish a universal set of precision-converter specifications for every variant.

⚡

Energy-Sensitive Embedded Products

The EFM32TG822F32-D-QFP48 suits energy-sensitive embedded products that combine simple control, event processing, and low standby demand. The 32 MHz processor provides ample responsiveness for control tasks and communication handling, while 4 KB RAM and 32 KB Flash target compact firmware rather than resource-heavy applications. Stop and Run current figures enable power-budget calculations when the processor duty cycle is known. Firmware should keep the core asleep whenever the peripheral set can operate independently, then wake it for short processing bursts.

What are the key specifications of EFM32TG822F32-D-QFP48 that engineers should know?
The EFM32TG822F32-D-QFP48 combines a 32 MHz ARM Cortex-M3 processor, 32 KB of Flash memory, 4 KB of RAM, and 37 digital I/O pins in a 48-pin TQFP package. According to the manufacturer product page and EFM32TG datasheet, it also includes two 16-bit timers and AES hardware acceleration. Its operating supply range is 1.98 V to 3.8 V, while published low-power figures reach 0.6 µA in Stop mode and 150 µA/MHz in Run mode.
Where can I download the EFM32TG822F32-D-QFP48 datasheet PDF?
The EFM32TG822F32-D-QFP48 datasheet PDF is available through the linked manufacturer-device documentation and the EFM32TG family datasheet PDF. The document defines the Cortex-M3 device characteristics, memory map, peripherals, electrical limits, package information, and pin descriptions. For design work, use the manufacturer’s EFM32TG datasheet together with the device-specific documentation and software support package, since the shared family document contains information for more than one device variant.
Where can I find the EFM32TG822F32-D-QFP48 pinout?
The EFM32TG822F32-D-QFP48 pinout is defined in the manufacturer EFM32TG family datasheet’s QFP-48 pin-description table. The package contains 48 positions, of which 37 provide digital I/O according to the manufacturer product page. Use the datasheet table for the exact multiplexed functions, power pins, ground pins, analog inputs, debug signals, and programming pins rather than inferring pin functions from a generic QFP footprint.
What is the EFM32TG822F32-D-QFP48 used for in low-power products?
The EFM32TG822F32-D-QFP48 is used in low-power products that require a 32-bit processor, local memory, and flexible digital I/O without the power burden of a continuously active general-purpose system. Its 32 MHz Cortex-M3 core supports responsive control, while the platform’s 0.6 µA Stop-mode figure and 150 µA/MHz Run-mode figure suit battery-powered sensor nodes, condition-monitoring equipment, compact instruments, and duty-cycled peripheral controllers.
Is the EFM32TG822F32-D-QFP48 suitable for industrial control applications?
The EFM32TG822F32-D-QFP48 is suitable for compact control applications when its 1.98 V to 3.8 V operating range and industrial temperature requirement are met by the selected device variant. Its 32 MHz Cortex-M3 core, two 16-bit timers, 37 digital I/O pins, and 4 KB RAM support event handling, timing, and embedded control. The manufacturer lists the part for energy-sensitive applications, including industrial and connected embedded products.
What is the difference between EFM32TG822F32-D-QFP48 and EFM32TG822F32-QFP48?
Both identifiers refer to the same EFM32TG822F32 device configuration with a 32 MHz Cortex-M3 core, 32 KB Flash, and 4 KB RAM, while the “-D” suffix identifies the ordering code used in the target listing. The manufacturer product page presents EFM32TG822F32-QFP48 as the base device. Verify the suffix, temperature grade, packing option, and marking against the manufacturer’s ordering-information table before treating either code as a procurement substitute.
Can EFM32TG822F32-QFP48 replace EFM32TG822F32-D-QFP48?
EFM32TG822F32-QFP48 is the closest documented same-brand alternative because the manufacturer page identifies the same 32 MHz, 32 KB Flash, 4 KB RAM device configuration in the QFP-48 package. Compatibility still depends on the ordering suffix, temperature grade, packing method, and pin configuration. Confirm those fields in the manufacturer ordering table and do not substitute solely because the product description and family name match.
When should I choose EFM32TG822F32-D-QFP48 over another 32-bit microcontroller?
Choose the EFM32TG822F32-D-QFP48 when the design benefits from an ARM Cortex-M3 core, 32 KB Flash, 4 KB RAM, 37 digital I/O pins, and the EFM32 platform’s low-power operating modes. It is especially suitable for compact battery-powered monitoring and control products that can benefit from Stop-mode operation and hardware AES. Select a different MCU when the design requires more Flash, significantly more RAM, a different peripheral mix, or a package that matches an existing board.
What can replace EFM32TG822F32-D-QFP48?
The strongest documented replacement is the Silicon Labs EFM32TG822F32-QFP48, which retains the same core speed, Flash capacity, RAM capacity, and QFP-48 device family. Its ordering details must still be checked for temperature and packing differences. No cross-manufacturer drop-in replacement was established with the same package, pin assignment, memory configuration, and peripheral behavior, so unverified MCU substitutions are not recommended for an existing PCB.
Is EFM32TG822F32-D-QFP48 the same as EFM32TG822F32-QFP48T?
The two entries are closely related EFM32TG822F32 QFP-48 orderable variants, but they are not interchangeable solely by name. EFM32TG822F32-QFP48T is listed as a distinct DigiKey ordering entry, and the trailing “T” commonly identifies the manufacturer’s specified packing option. Confirm the manufacturer ordering table, reel or tube configuration, temperature grade, and marking before using one ordering code in place of the other.
Where can I buy EFM32TG822F32-D-QFP48 online?
Use the Request a Quote form on this page to request EFM32TG822F32-D-QFP48 availability, current pricing, and lead time for the required quantity and packaging. The form provides a single channel for a sourcing response without relying on potentially stale listing prices. Include the exact 48-pin TQFP ordering code and state whether tape-and-reel or another manufacturer-approved packing format is required.
What is the price of EFM32TG822F32-D-QFP48?
Current EFM32TG822F32-D-QFP48 pricing is not displayed as a static value on this page because component prices and availability change with quantity and market conditions. Submit the Request a Quote form with your required quantity, packaging, and target delivery region. The quote response should confirm the exact MPN, current unit price, extended price, and any minimum-order or lead-time conditions.
What is the lead time for EFM32TG822F32-D-QFP48?
The current lead time for EFM32TG822F32-D-QFP48 should be requested through the Request a Quote form on this page. Include the required quantity, reel format, manufacturing location, and requested delivery date so the supplier can confirm whether the exact ordering code is available. A lead-time estimate without those commercial parameters would not reliably represent the manufacturer’s current supply status.
Is EFM32TG822F32-D-QFP48 in stock?
Stock status changes rapidly for this microcontroller, so use the Request a Quote form on this page to confirm availability for the exact EFM32TG822F32-D-QFP48 ordering code. Specify the quantity and packaging format when requesting an allocation. Avoid treating a marketplace indication as a guaranteed allocation for a multi-roll production build.
Does the EFM32TG822F32-D-QFP48 meet RoHS and REACH requirements?
The EFM32TG822F32-D-QFP48’s current RoHS and REACH status must be confirmed from the manufacturer’s current material or compliance declaration for the exact ordering code. The manufacturer product page and device documentation identify the EFM32TG822F32-QFP48 family, but the available product information does not explicitly state each regional substance declaration. Request the current compliance documentation before claiming suitability for a regulated production release.

Data referensi kejuruteraan untuk EFM32TG822F32-D-QFP48 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the EFM32TG822F32-D-QFP48 when an embedded design needs a 32 MHz ARM Cortex-M3 core, 32 KB Flash, 4 KB RAM, 37 digital I/O pins, and low-power operating modes in a 48-pin TQFP package. It is a strong fit for battery-powered sensing, condition monitoring, compact LCD interfaces, and portable instrumentation. Choose EFM32TG822F32-QFP48 when the base manufacturer ordering code satisfies the required temperature and packing rules. Choose EFM32TG822F32-QFP48T when its documented packing format matches the assembly process. Neither alternative changes the core speed or memory capacity. Do not select another MCU solely by processor frequency: verify the complete pin assignment, peripheral set, package dimensions, programming interface, and supply range before approving a board-level replacement.

Perbandingan dengan Gantian

Parametr Produk Ini EFM32TG822F32-QFP48 EFM32TG822F32-QFP48T
Manufacturer Silicon Labs Silicon Labs Silicon Labs
Package 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm) 48-TQFP (7 mm x 7 mm)
Processor Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 32 KB
RAM Memory 4 KB 4 KB 4 KB
Digital I/O Pins 37 pins 37 pins 37 pins
Timers 2 x 16-bit timers 2 x 16-bit timers 2 x 16-bit timers

Penyeberangsung Jelas

  • 32-bit processing in a compact energy-focused MCU (vsEFM32TG822F32-QFP48)
  • Same QFP-48 mechanical footprint (vsEFM32TG822F32-QFP48T)
  • Low-power operating characteristics (vsEFM32TG822F32-QFP48)

Catatan Desain

Build the power budget around the processor duty cycle because the 150 µA/MHz Run-mode figure and 0.6 µA Stop-mode figure represent different operating states. Calculate average current from the time spent executing code, handling wake events, and sleeping. Keep the 1.98 V to 3.8 V supply range visible in the regulator design, and use the manufacturer’s recommended decoupling configuration to prevent supply transients from disturbing Cortex-M3 execution.

Use the manufacturer QFP-48 land pattern and assign every connection from the datasheet pin-description table. Place supply and ground connections according to the recommended decoupling arrangement, route sensitive analog and oscillator inputs away from fast digital nets, and preserve the documented programming and debug access. The 37 digital I/O count does not imply that every package position is a general-purpose GPIO, so pin multiplexing must be checked before schematic capture.

Do not treat EFM32TG822F32-QFP48 and EFM32TG822F32-QFP48T as identical procurement records without checking the ordering-information table. The trailing suffix can identify a distinct packing configuration, and the target’s additional “-D” code must also be reconciled with temperature grade, package, and marking. Firmware projects should import the correct Silicon Labs device support package because peripheral availability and pin definitions can vary across closely related EFM32 devices.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product information does not explicitly state the substance-compliance declarations for this exact ordering code. AEC-Q100 is not applicable because the device is not presented as an automotive-qualified part.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

efm32tg822f32 d qfp48 EFM32TG822F32-D-QFP48 datasheet EFM32TG822F32-D-QFP48 pinout EFM32TG822F32-D-QFP48 price EFM32TG822F32-D-QFP48 stock EFM32TG822F32-D-QFP48 equivalent EFM32TG822F32-D-QFP48 replacement EFM32TG822F32-D-QFP48 footprint EFM32TG822F32-D-QFP48 vs EFM32TG822F32-QFP48 Silicon Labs EFM32TG822F32-D-QFP48 EFM32TG822F32 32MHz Cortex-M3 EFM32TG822F32-D-QFP48 application circuit

Komponen dan Tanda berkaitan

Silicon Labs EFM32TG822F32-D-QFP48 EFM32TG822F32-QFP48 EFM32TG822F32-QFP48T EFM32TG Tiny Gecko ARM Cortex-M3 microcontroller MCU 32-bit microcontroller embedded processor low-power microcontroller semiconductor 32 KB Flash memory 4 KB RAM 37 digital I/O pins 16-bit timer AES hardware acceleration Stop mode Run mode 48-pin TQFP TQFP-48 surface mount SMD package 1.98 V to 3.8 V battery-powered sensor nodes industrial condition monitoring LCD control panel embedded control
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ