EFM32TG822F32-D-QFP48 - 32MHz Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG822F32-D-QFP48 ✓ 啟用中EFM32TG822F32-D-QFP48 概覽
A microcontroller is a programmable integrated circuit that combines a processor core, memory, peripherals, and I/O within one compact device. The EFM32TG belongs to the Tiny Gecko family of 32-bit microcontrollers, a low-power product line within the broader ARM Cortex-M microcontroller and embedded-processor hierarchy. Its architecture combines conventional CPU execution with energy-conscious peripherals and low-power operating modes for embedded control, sensing, communications, and portable products.
The device provides a 32-bit ARM Cortex-M3 processor with a maximum clock frequency of 32 MHz. Its 32 KB Flash memory supports firmware storage, while 4 KB of RAM provides working memory for application data and stack operations. The peripheral set includes two 16-bit timers, 37 digital I/O pins, AES capability, and an LCD-oriented variant within the Tiny Gecko family, making the MCU suitable for compact control systems that require more processing capability than an 8-bit microcontroller.
Silicon Labs emphasizes low-power operation in the EFM32TG platform. The published device literature identifies consumption as low as 0.6 µA in Stop mode and 150 µA/MHz in Run mode. These figures support duty-cycled designs in which the processor spends most of its operating time sleeping and wakes only to acquire measurements, update an interface, or perform control actions. Fast wake-up behavior can further reduce the energy cost of periodic sensing.
Typical uses include battery-powered sensor nodes, industrial condition-monitoring devices, compact instrumentation, low-power control panels, connected peripheral equipment, and embedded products with LCD or small user interfaces. The 32 MHz processor supports responsive control and protocol handling, while the autonomous low-energy approach reduces the need to keep the core active continuously.
PCB implementation should follow the manufacturer’s QFP-48 land pattern and pin-description tables. Confirm decoupling, programming access, oscillator routing, reset behavior, and exposed analog functions against the datasheet before layout. Firmware development should use the compatible EFM32 software tooling and device support package rather than assuming that a generic Cortex-M board definition maps every peripheral identically.
This page consolidates the confirmed 32 MHz performance, memory configuration, package details, low-power characteristics, sourcing information, replacement analysis, and practical design considerations into a focused engineering reference for EFM32TG822F32-D-QFP48 evaluation.
直接替換替代品,適用於 EFM32TG822F32-D-QFP48 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: EFM32TG822F32-D-QFP48 (相同外形與佔位) — 差異在於 Package, Digital I/O Pins, Flash Memory, Product Type, Supply Voltage Range.
EFM32TG822F32-QFP48
✅ 直接替換聯絡詢價
查看資料表 →EFM32TG822F32-QFP48T
✅ 直接替換聯絡詢價
查看資料表 →EFM32TG822F32-D-QFP48 最大額定值與電氣特性
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Product Family | EFM32 Tiny Gecko |
| Processor Core | ARM Cortex-M3 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 32 MHz |
| Flash Memory | 32 KB |
| RAM Memory | 4 KB |
| Digital I/O Pins | 37 pins |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Stop Mode Current | 0.6 µA |
| Run Mode Current | 150 µA/MHz |
| Security Feature | AES hardware acceleration |
| 封裝 | 48-pin TQFP (7 mm x 7 mm) |
| 安裝類型 | Surface mount |
| Configurable Peripheral I/O Locations | Up to 68 |
EFM32TG822F32-D-QFP48 48-pin tqfp (7 mm x 7 mm) 腳位配置指南
EFM32TG822F32-D-QFP48(48-pin tqfp (7 mm x 7 mm) 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: EFM32TG822F32-D-QFP48.
請參閱 資料表 以查看完整腳位配置。
典型應用
EFM32TG822F32-D-QFP48 適用於 6 應用s: Battery-Powered Sensor Nodes, Industrial Condition Monitoring, Compact LCD Control Panels, Low-Power Connected Peripherals, Portable Test and Measurement, Energy-Sensitive Embedded Products.
Battery-Powered Sensor Nodes
The EFM32TG822F32-D-QFP48 fits battery-powered sensor nodes that periodically acquire measurements and then return to a low-power state. Its 32 MHz ARM Cortex-M3 core provides enough processing capability for filtering, local calculations, and protocol handling, while the 4 KB RAM supports short control tasks. Published power figures of 0.6 µA in Stop mode and 150 µA/MHz in Run mode make duty-cycled operation practical. Configure peripherals for intermittent sensing and use the EFM32 low-energy tools to reduce wake-up and processing overhead.
Industrial Condition Monitoring
The EFM32TG822F32-D-QFP48 is suitable for industrial condition-monitoring modules that combine digital sensors with local threshold logic and communications. The 37 digital I/O pins support discrete inputs, status indicators, and peripheral control, while two 16-bit timers can support periodic sampling or timing functions. A 32 MHz Cortex-M3 core can preprocess vibration, temperature, or flow-related signals without requiring a host processor. Its low-power modes are valuable in installations where the monitor spends long intervals between events.
Compact LCD Control Panels
The EFM32TG822F32-D-QFP48 supports compact LCD-oriented control panels and human-interface modules where a 32-bit core is useful without requiring a high-performance application processor. Its 32 KB Flash stores firmware and interface resources, while 4 KB RAM supports display updates and input state. The 37 digital I/O pins leave room for segment or button signals, depending on the selected LCD interface configuration. Design the firmware around the EFM32 display peripherals and verify timing and multiplexing requirements in the manufacturer datasheet.
Low-Power Connected Peripherals
The EFM32TG822F32-D-QFP48 can serve as the embedded controller in a low-power connected peripheral, such as a compact asset tracker, environmental monitor, or maintenance sensor. The 32-bit Cortex-M3 processor can execute communication stacks and application logic, and AES hardware acceleration supports security-sensitive data handling. Stop-mode operation helps reduce energy use between transmissions, while fast wake-up supports responsive user or network events. The 1.98 V to 3.8 V operating range should be reconciled with the radio and power-supply design.
Portable Test and Measurement
The EFM32TG822F32-D-QFP48 is appropriate for portable test and measurement products that combine sampling control, local display, and data logging. Two 16-bit timers provide useful timing resources for measurement sequencing or input capture, while 37 digital I/O pins support instrument controls. Its low-power architecture favors handheld or field instruments that operate for extended periods away from mains power. Confirm analog measurement requirements separately, since the available device information does not establish a universal set of precision-converter specifications for every variant.
Energy-Sensitive Embedded Products
The EFM32TG822F32-D-QFP48 suits energy-sensitive embedded products that combine simple control, event processing, and low standby demand. The 32 MHz processor provides ample responsiveness for control tasks and communication handling, while 4 KB RAM and 32 KB Flash target compact firmware rather than resource-heavy applications. Stop and Run current figures enable power-budget calculations when the processor duty cycle is known. Firmware should keep the core asleep whenever the peripheral set can operate independently, then wake it for short processing bursts.
工程參考資料,適用於 EFM32TG822F32-D-QFP48 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | EFM32TG822F32-QFP48 | EFM32TG822F32-QFP48T |
|---|---|---|---|
| Manufacturer | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) |
| Processor Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 KB | 32 KB | 32 KB |
| RAM Memory | 4 KB | 4 KB | 4 KB |
| Digital I/O Pins | 37 pins | 37 pins | 37 pins |
| Timers | 2 x 16-bit timers | 2 x 16-bit timers | 2 x 16-bit timers |
主要差異化特點
- 32-bit processing in a compact energy-focused MCU (對比EFM32TG822F32-QFP48)
- Same QFP-48 mechanical footprint (對比EFM32TG822F32-QFP48T)
- Low-power operating characteristics (對比EFM32TG822F32-QFP48)
設計說明
Build the power budget around the processor duty cycle because the 150 µA/MHz Run-mode figure and 0.6 µA Stop-mode figure represent different operating states. Calculate average current from the time spent executing code, handling wake events, and sleeping. Keep the 1.98 V to 3.8 V supply range visible in the regulator design, and use the manufacturer’s recommended decoupling configuration to prevent supply transients from disturbing Cortex-M3 execution.
Use the manufacturer QFP-48 land pattern and assign every connection from the datasheet pin-description table. Place supply and ground connections according to the recommended decoupling arrangement, route sensitive analog and oscillator inputs away from fast digital nets, and preserve the documented programming and debug access. The 37 digital I/O count does not imply that every package position is a general-purpose GPIO, so pin multiplexing must be checked before schematic capture.
Do not treat EFM32TG822F32-QFP48 and EFM32TG822F32-QFP48T as identical procurement records without checking the ordering-information table. The trailing suffix can identify a distinct packing configuration, and the target’s additional “-D” code must also be reconciled with temperature grade, package, and marking. Firmware projects should import the correct Silicon Labs device support package because peripheral availability and pin definitions can vary across closely related EFM32 devices.
合規資訊
The available product information does not explicitly state the substance-compliance declarations for this exact ordering code. AEC-Q100 is not applicable because the device is not presented as an automotive-qualified part.