EP20K160EQC240-2X - APEX 20KE FPGA 160K Gates 240-PQFP | Intel
MPN: EP20K160EQC240-2X ✗ Akhir HayatEP20K160EQC240-2X Ringkasan
What is a FPGA? A Field Programmable Gate Array is a type of programmable logic device (PLD) that allows designers to configure digital logic blocks and interconnect after manufacturing. FPGAs sit in the broader hierarchy of programmable logic devices: PLD -> CPLD -> FPGA -> SoC FPGA. They are widely used to implement custom digital signal processing, glue logic, bus interfaces, and high-speed parallel processing pipelines that would otherwise require discrete logic ICs or ASICs.
The EP20K160EQC240-2X features the APEX MultiCore architecture combining look-up table (LUT)-based logic with embedded array blocks (EABs) for memory and arithmetic functions. It provides up to 271 user I/Os, 4 phase-locked loops, 345,600 bits of embedded memory, and supports in-system programmability via the IEEE 1149.1 JTAG interface. The -2 speed grade indicates a mid-tier performance classification within the APEX 20KE product line.
Typical applications include telecommunications backplane interfacing, custom DSP pipelines, industrial control glue logic, and legacy system prototyping. The 240-pin PQFP package enables socketed or hand-soldered assembly, which is preferred for prototype boards and legacy through-hole-friendly designs where BGA rework capability is limited.
When designing with this part, note that 1.8 V core and I/O voltages require level-shifters when interfacing to 3.3 V or 5 V logic families. The MultiCore architecture also requires Quartus II (or MAX+PLUS II for legacy flows) for place-and-route, and configuration bitstream generation from Verilog or VHDL source.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the original manufacturer datasheet. Engineers migrating designs from older Altera tools should review the Quartus II device support notes before recompiling existing APEX 20KE projects.
Pilihan pengganti yang segera untuk EP20K160EQC240-2X — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera EP20K160EQC240-2X (sama faktor bentuk dan kaki) — berbeza dalam Package, Mounting Type, Operating Temperature, Speed Grade, User I/Os.
EP20K160EQC240-2
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP20K160EQC240-2N
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
EP20K160EQC240-2XN
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
EP20K160EQC240-1X
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP20K100EQC240-2X
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP20K160EQC240-2X Penilaian maksimum & Ciri-ciri Elektrik
| Series | APEX-20KE |
| Logic Elements | 6,400 |
| System Gates | 160,000 |
| Embedded Memory Bits | 345,600 |
| Maximum Internal Frequency | 350 MHz |
| Propagation Delay (Tpd) | 1.93 ns |
| Number of I/Os | 175 (Mouser) / 271 (datasheet summary) |
| Number of PLLs | 4 |
| Core Process Technology | 0.22 um CMOS |
| Core Voltage | 1.71 V to 1.89 V (1.8 V nominal) |
| I/O Voltage | Multi-voltage (3.3 V / 2.5 V / 1.8 V compatible) |
| Kemasan | 240-BQFP (PQFP-240, 32x32 mm) |
| Speed Grade | -2 |
| Jenis Pemasangan | Surface Mount (PQFP, gull-wing leads) |
| Suhu Operasi | 0 C to 85 C (Commercial) |
| Programming Interface | IEEE 1149.1 JTAG + Altera ByteBlaster |
| Logic Family | CMOS |
Panduan Konfigurasi Pin EP20K160EQC240-2X 240-bqfp (pqfp-240, 32x32 mm)
Konfigurasi pin untuk EP20K160EQC240-2X (240-bqfp (pqfp-240, 32x32 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk EP20K160EQC240-2X.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
EP20K160EQC240-2X patut untuk 6 aplikasis: Telecommunications Backplane Glue Logic, Industrial Control and Factory Automation, Custom DSP Pipeline Implementation, Legacy ASIC Replacement and Prototype Bring-up, Test and Measurement Instrumentation, Aerospace and Defense Legacy Avionics.
Telecommunications Backplane Glue Logic
The EP20K160EQC240-2X is well suited to legacy telecom backplane interfacing where it implements custom bus-bridges between E1/T1 framers, SONET framer ASICs, and backplane serializers. Its 175 user I/Os (per the Mouser listing) provide ample fan-out for 16-32 bit parallel buses, while the 4 PLLs enable jitter-cleaned clock distribution to multiple daughter cards. The 240-PQFP package allows socketed assembly for field-replaceable units common in central-office equipment. Compared to ASIC replacement, the APEX 20KE permits last-minute protocol upgrades without respinning masks.
Disebarkan
Industrial Control and Factory Automation
In factory-automation controllers, the EP20K160EQC240-2X implements deterministic state machines, PWM generators, and motion-control glue logic between microcontrollers and power-stage drivers. The 1.8 V core voltage with multi-voltage I/O lets the FPGA directly interface 2.5 V and 3.3 V ASICs while interfacing 5 V opto-isolators through external level shifters. With 345,600 embedded memory bits, it absorbs real-time lookup tables for cam profiles and PID gains. The commercial 0-85 C temperature range covers most factory-floor cabinets, and the 240-PQFP package is hand-solderable for prototype maintenance.
Disebarkan
Custom DSP Pipeline Implementation
The APEX 20KE's embedded array blocks (EABs) make the EP20K160EQC240-2X effective for custom DSP pipelines such as FIR filters, FFT pre/post-processors, and baseband demodulators. Each EAB can be configured as 256x8, 512x4, 1024x2, or 2048x1 ROM/RAM, allowing coefficient storage to be tightly integrated with multiplier logic. Internal clock rates up to 350 MHz support sample rates above 100 MSPS in moderate-complexity filters. For designers modernizing legacy DSP code, the -2 speed grade provides predictable timing closure under MAX+PLUS II timing-driven compilation.
Disebarkan
Legacy ASIC Replacement and Prototype Bring-up
The EP20K160EQC240-2X is a frequent choice for ASIC-replacement designs where a custom mask-spin is no longer economically justified. With 160,000 system gates and 6,400 logic elements, it can replicate mid-complexity ASICs (typical gate-array ASICs in the 80K-150K usable gate range) while preserving the existing PCB footprint through the 240-PQFP package. Engineers migrating from Altera Classic or MAX series PLDs benefit from APEX 20KE's upward-compatible Quartus II toolchain, and the 240-pin BQFP allows low-cost PCB layout conversion from prior 240-pin QFP designs.
Disebarkan
Test and Measurement Instrumentation
In bench-top test equipment, the EP20K160EQC240-2X implements custom stimulus generators, protocol analyzers, and timing-measurement logic. The 4 PLLs allow precise multi-rate clocking required for parallel-serial bus monitoring (I2C, SPI, UART, proprietary buses), while 175 user I/Os enable simultaneous capture of 16+ digital channels. Embedded memory supports deep capture buffers, reducing off-chip SRAM requirements. The BQFP-240 package is convenient for low-volume instrumentation where hand-rework of prototypes is preferred over BGA rework.
Disebarkan
Aerospace and Defense Legacy Avionics
Although the EP20K160EQC240-2X is commercial-grade (0-85 C), it is widely used in support roles for legacy avionics and defense test rigs where a previously-validated design is being reproduced or maintained. The 240-PQFP package's gull-wing leads deliver strong mechanical-thermal performance under vibration, and the abundant 345,600-bit embedded memory allows implementation of mission-specific lookup tables without external memory. Per MIL-HDBK-454 general design guidelines, designers of fielded equipment often select this part for its mature Quartus II tool support and long-term Rochester Electronics inventory availability.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk EP20K160EQC240-2X — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | EP20K160EQC240-2 | EP20K160EQC240-2N | EP20K160EQC240-2XN | EP20K160EQC240-1X | EP20K100EQC240-2X |
|---|---|---|---|---|---|---|
| Package | 240-BQFP (PQFP-240, 32x32 mm) | 240-BQFP (PQFP-240) - same | 240-BQFP (PQFP-240) - same | 240-BQFP (PQFP-240) - same | 240-BQFP (PQFP-240) - same | 240-BQFP (PQFP-240) - same |
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| System Gates | 160,000 | 160,000 | 160,000 | 160,000 | 160,000 | 100,000 |
| Logic Elements | 6,400 | 6,400 | 6,400 | 6,400 | 6,400 | 4,160 |
| Speed Grade | -2 | -2 | -2 | -2 | -1 (slower) | -2 |
| Propagation Delay (Tpd) | 1.93 ns | 1.93 ns | 1.93 ns | 1.93 ns | 2.5 ns (approx -1 grade) | 1.93 ns |
| Embedded Memory Bits | 345,600 | 345,600 | 345,600 | 345,600 | 345,600 | 212,992 |
| Core Voltage | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V | 1.8 V |
| Approx Unit Price (1 pc) | $34.83 | Similar, ~$34 | Similar, ~$34 | Similar, ~$34 | Often lower (older speed grade) | Often lower (smaller die) |
Penyeberangsung Jelas
- Same 240-BQFP footprint across APEX 20KE family (vsEP20K160EQC208-3N)
- Higher logic density at same package (vsEP20K100EQC240-2X)
- -2 speed grade over -1 grade (vsEP20K160EQC240-1X)
Catatan Desain
The EP20K160EQC240-2X requires a clean 1.8 V core supply with at least 1.71 V to 1.89 V tolerance per the APEX 20KE datasheet. Multi-voltage I/O banks allow 1.8 V / 2.5 V / 3.3 V on different banks, but each bank needs its own VCCIO rail. Estimated: at 50% toggle rate and 25 C ambient, Icc core is approximately 250-400 mA - verify with PowerPlay Early Power Estimator in Quartus II before finalizing the regulator (a TPS7A4701 1-A LDO is sufficient but operates near dropout on a 2.5 V intermediate rail). Decouple every VCC pin with a 0.1 uF X7R ceramic plus a 10 uF bulk capacitor within 5 mm of the package.
The 240-PQFP package has limited thermal dissipation. Estimated: at typical operating power of ~1 W the junction-to-ambient temperature rise on a 4-layer 2oz copper PCB is approximately 25-35 C (theta_JA approx 25-35 C/W for BQFP-240 with copper pour). Avoid placing the device near heat-dissipating components; if the application runs at sustained high toggle rates, add a small clip-on heatsink or copper spreader on the top side.
Pin 1 location on the 240-BQFP follows the JEDEC PQFP convention: pin 1 at the dot/marker, counter-clockwise numbering. Use at least 6 ground vias in the thermal pad region below the package (BQFP-240 PQFP has no center pad but still benefits from a continuous top-layer ground pour). Route all clock inputs with 50 ohm controlled-impedance traces and avoid running signal traces under the device body. JTAG pins (TCK, TMS, TDI, TDO) require 4.7 kohm pull-ups on TCK and TMS to avoid spurious configuration.
Common pitfalls include: (1) selecting the wrong Quartus version - Quartus Prime 14.0 and later do not include the APEX 20KE device library, so Quartus II 13.0sp1 is the final supporting release; (2) omitting the configuration PROM (EPC2/EPC4/EPC8) on first power-up leaves the FPGA in undefined state until configuration; (3) confusing the -1 and -2 speed grades results in timing closure failures at rated clock rates - always verify timing reports in Quartus TimeQuest after compilation; (4) mixing 3.3 V and 5 V signals without level shifters on multi-voltage I/O banks can permanently damage the device.
Maklumat Kesediaan
RoHS/lead-free status for EP20K160EQC240-2X marked [DATA_NEEDED: RoHS / lead-free status]; the -2X suffix on Altera APEX parts conventionally indicates Pb-free finish but explicit certification document was not present in verified web data. Not AEC-Q100 qualified - this is a commercial-grade (0-85 C) FPGA not intended for automotive safety-critical applications.
