EP2A25F672I9 - APEX II 900K Gates FPGA | Intel (Altera) | FC-FBGA-672
MPN: EP2A25F672I9 ✗ Akhir HayatEP2A25F672I9 Ringkasan
An FPGA (Field-Programmable Gate Array) is a type of programmable logic device (PLD) containing an array of configurable logic blocks (CLBs), programmable interconnect, and I/O cells that engineers can reconfigure in-circuit to implement custom digital circuits. Within the broader semiconductor taxonomy, FPGAs belong to the programmable logic family, which sits between fixed-function ASICs and software-defined microcontrollers; APEX II specifically targets high-density, multi-million-system-gate designs.
Key specifications of the EP2A25F672I9 include 24,320 logic cells, 900K ASIC-equivalent gates, embedded system blocks (ESBs) for dual-port RAM and ROM, up to 422,400 RAM bits, and four phase-locked loops (PLLs) for clock management. The device also features high-speed LVDS I/O support, dedicated multiplier circuitry, and a multi-voltage I/O standard set including LVCMOS, LVTTL, SSTL, and HSTL. Its 672-pin FC-FBGA package provides the high I/O count and signal-integrity characteristics required by telecommunications and high-performance data-path designs.
Architecturally, the EPEX II device uses a MultiCore architecture combining fine-grain logic elements with embedded memory and a high-bandwidth interconnect fabric. The 0.15 µm metal-layer process supports the high gate count while keeping die area manageable; flip-chip BGA packaging reduces lead inductance and enables the high toggle rates needed at 236 MHz. APEX II introduced the first embedded system blocks for RAM/ROM in an Altera high-density family, replacing earlier distributed-RAM schemes and simplifying synchronous memory inference.
Typical applications for the EP2A25F672I9 include telecommunications backplane interfacing, custom DSP pipelines, high-speed data-acquisition front-ends, networking ASIC prototyping, and industrial motion-control subsystems. Its high gate count and embedded RAM also make it useful for system-on-chip (SoC) prototyping and bridge-chip designs that precede ASIC tape-out.
When designing with this FPGA, pay close attention to power-rail sequencing (1.5 V core and a separate VCCIO bank supply), thermal management through adequate PCB copper area, and signal-integrity on LVDS pairs. Plan configuration mode (e.g., passive serial, JTAG) and decoupling before layout finalization.
This page consolidates distributor pricing, design considerations, and verified pin-compatible alternatives that complement the Intel/Altera APEX II datasheet. It is intended to accelerate component selection and BOM risk assessment for engineering teams evaluating legacy FPGAs.
Pilihan pengganti yang segera untuk EP2A25F672I9 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera EP2A25F672I9 (sama faktor bentuk dan kaki) — berbeza dalam Package, Process Technology, Speed Grade, Operating Temperature, Embedded Memory.
EP2A25F672I8N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672I8
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672I7N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672I7
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672I6
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672C9N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672C9
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →EP2A25F672I9 Penilaian maksimum & Ciri-ciri Elektrik
| Family | APEX II |
| Manufacturer | Intel (formerly Altera) |
| Logic Elements (LEs) | 24,320 |
| System Gates (typical) | 900,000 |
| Maximum Operating Frequency | 236 MHz |
| Process Technology | 0.15 µm CMOS |
| Core Voltage (VCCINT) | 1.5 V |
| Kemasan | 672-pin FC-FBGA |
| Kiraan Pin | 672 |
| Temperature Grade | Industrial (-40 °C to +100 °C) |
| Speed Grade | 9 (fastest APEX II grade) |
| Embedded System Blocks (ESBs) | Yes (dual-port RAM/ROM) |
| Maximum Memory Bits | 422,400 bits |
| PLLs | 4 |
| Jenis Pemasangan | Surface Mount (flip-chip BGA) |
| Peak Reflow Temperature | 220 °C (per distributor listing) |
| Tingkat sensitiviti Air Nama (MSL) | 3 |
| Status RoHS | Unknown (legacy 2000s part; verify lot certificate) |
Panduan Konfigurasi Pin EP2A25F672I9 672-pin fc-fbga
Konfigurasi pin untuk EP2A25F672I9 (672-pin fc-fbga pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk EP2A25F672I9.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
EP2A25F672I9 patut untuk 6 aplikasis: Telecommunications Backplane Interfacing, ASIC Prototyping and Pre-Silicon Validation, High-Speed Data Acquisition Front-Ends, Custom DSP Pipeline Implementation, Industrial Motion Control Subsystems, Networking ASIC Bridge Chip (Pre-Tapeout).
Telecommunications Backplane Interfacing
The EP2A25F672I9 fits telecommunications backplane bridging because its 24,320 LEs and 900K system gates provide headroom for multi-channel framing, serializer/deserializer glue logic, and protocol-state machines on the same die. Its 236 MHz fmax at speed grade 9 and embedded dual-port RAM (ESBs) handle serial-to-parallel conversions and small FIFO buffers commonly used at line-card to switch-fabric boundaries. The 672-pin FC-FBGA package supports the high I/O count needed for parallel backplane buses and LVDS pairs running at hundreds of megabits per second. Engineers should pair the FPGA with external PHY transceivers and budget careful timing for clock-domain crossings between backplane and core logic.
Disebarkan
ASIC Prototyping and Pre-Silicon Validation
The 900K system-gate capacity of the EP2A25F672I9 makes it a credible target for ASIC prototyping where the design-under-test typically maps to 70-90% of an FPGA's available logic. Industrial temperature grading supports validation in chassis that emulate production environments, while 422,400 bits of embedded RAM cover medium-sized register files and FIFO structures common to ASIC prototypes. Speed grade 9 provides timing margin that emulates ASIC performance more accurately than slower grades. Designers use this FPGA in conjunction with partitioning scripts to map ASIC RTL into multiple APEX II devices when logic exceeds one chip's capacity.
Disebarkan
High-Speed Data Acquisition Front-Ends
In data-acquisition front-ends, the EP2A25F672I9 provides the parallel processing fabric required for waveform capture, real-time filtering, and data reduction before host transfer. Its embedded system blocks implement dual-port RAM line buffers, while the four PLLs generate multiple sample-rate clocks from a single reference. Industrial temperature grading allows deployment in field instrumentation, not just controlled labs. The flip-chip BGA package offers the signal-integrity margin needed for low-jitter sampling at high analog bandwidths when paired with high-speed ADCs.
Disebarkan
Custom DSP Pipeline Implementation
The EP2A25F672I9 is well-suited to custom DSP pipelines because its 24,320 LEs can realize hundreds of multiplier-accumulator stages, and embedded memory supports coefficient tables and circular delay-line buffers. At 236 MHz, the fabric supports FIR filter sample rates in the hundreds of MSPS depending on filter length. Industrial temperature grading makes it deployable in outdoor or factory DSP applications such as vibration analysis, condition monitoring, and software-defined radio baseband preprocessing. Designers should pipeline aggressively and use the dedicated ESB blocks to free logic resources for arithmetic.
Disebarkan
Industrial Motion Control Subsystems
Industrial motion control benefits from the EP2A25F672I9 because its high gate count and 672-pin BGA accommodate multi-axis servo loops, encoder decoding, and safety logic in a single device. Industrial temperature grading (-40 °C to +100 °C) is essential for cabinet or machine-mount environments. The embedded dual-port RAM simplifies PID controller tables and trajectory buffers, while PLLs allow precise switching-frequency synthesis for PWM outputs. Engineers should design with adequate decoupling and follow APEX II power-sequencing recommendations to ensure deterministic startup under load.
Disebarkan
Networking ASIC Bridge Chip (Pre-Tapeout)
Before committing a networking ASIC to fabrication, design teams often deploy the EP2A25F672I9 as a bridge chip to emulate packet-processing behavior and validate software stacks against real hardware. The 900K system-gate capacity is sufficient for full L2/L3 forwarding tables, while embedded memory holds route-cache structures. Speed grade 9 delivers realistic timing for backplane interfaces, reducing the risk of late-tapeout surprises. Industrial temperature grading allows validation in commercial-grade chassis as well as outdoor pilot deployments.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk EP2A25F672I9 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | EP2A25F672I8N | EP2A25F672I8 | EP2A25F672I7N | EP2A25F672C9N |
|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | FC-FBGA-672 | FC-FBGA-672 - same | FC-FBGA-672 - same | FC-FBGA-672 - same | FC-FBGA-672 - same |
| Logic Elements (LEs) | 24,320 | 24,320 | 24,320 | 24,320 | 24,320 |
| Speed Grade | 9 (fastest) | 8 | 8 | 7 | 9 |
| Temperature Grade | Industrial (-40 °C to +100 °C) | Industrial | Industrial | Industrial | Commercial (0 °C to +85 °C) |
| Maximum Frequency | 236 MHz | ~225 MHz (grade 8 estimate) | ~225 MHz (grade 8 estimate) | ~210 MHz (grade 7 estimate) | 236 MHz |
| Embedded RAM Bits | 422,400 | 422,400 | 422,400 | 422,400 | 422,400 |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Penyeberangsung Jelas
- Highest speed grade within APEX II 672-pin family (vsEP2A25F672I8N)
- Industrial temperature range (-40 °C to +100 °C) (vsEP2A25F672C9N)
- Full 900K system-gate capacity (vsEP2A15F672I8)
Catatan Desain
The EP2A25F672I9 requires two power rails: a 1.5 V VCCINT for the core and a separate VCCIO for each I/O bank (commonly 3.3 V, 2.5 V, 1.8 V or 1.5 V depending on the I/O standard). Power sequencing must follow Altera APEX II recommendations - VCCINT should rise before or simultaneously with VCCIO, and the device's POR (power-on-reset) circuit must see a monotonic ramp. Bulk decoupling of 100 µF plus 0.1 µF ceramics at each supply pin, and 10 µF near each PLL VCC pin, are mandatory. Decoupling layout is critical because the 236 MHz toggle rate couples high-frequency current into the planes.
Estimated: at 236 MHz toggling across 50% of LEs at typical APEX II utilization, the EP2A25F672I9 can dissipate 2-4 W. The FC-FBGA-672 package's thermal performance depends strongly on PCB copper area and inner-plane stitching. Design at least 4 thermal vias in the BGA thermal pad region and use a continuous ground plane on layer 2 to spread heat. For sealed enclosures, derate junction temperature by ensuring airflow or attach a heatsink with thermal interface material. Industrial-grade parts must keep Tj below 100 °C for full-temperature operation.
The FC-FBGA-672 has a fine pitch (typically 1.27 mm or 1.0 mm ball pitch depending on density code) - follow Altera APEX II package guidelines for escape routing, microvia stack-ups, and BGA pad design. Use 50 Ω controlled impedance for LVDS pairs, and 60-100 Ω differential for high-speed clocks. Match trace lengths within ±150 ps across LVDS data and clock pairs to meet APEX II LVDS timing budgets. Avoid routing signals across power-plane splits, which would inject noise into sensitive PLL supply pins.
Do not assume a Cyclone or newer Altera/Intel FPGA is a drop-in replacement - those families use different packages, different I/O standards, and different configuration schemes. Also, do not confuse APEX II (EP2A prefix) with APEX 20K (EP20K prefix); the architectures are related but differ in embedded memory organization. Verify the configuration mode (passive serial, JTAG, etc.) is supported by your programmer before board bring-up. MSL 3 requires dry-pack handling and floor-life accounting before reflow.
Maklumat Kesediaan
The EP2A25F672I9 is a legacy 2000s-era Altera FPGA whose RoHS/REACH status varies by date code and lot. -N suffixed variants are typically lead-free; non-suffixed variants may be SnPb. Always request a certificate of conformance (CoC) and material declaration from the distributor before procurement.
