Analog Devices

ICL7107CQH+D - 3.5-Digit LED Display ADC | Analog Devices

MPN: ICL7107CQH+D ✓ Aktif
44-pin PLCC, 16.59 mm × 16.59 mm Package
MOQ: 1 |

ICL7107CQH+D Ringkasan

The Analog Devices ICL7107CQH+D is a monolithic 3.5-digit dual-slope analog-to-digital converter with direct LED display drive capability, supplied in a 44-pin PLCC package measuring 16.59 mm by 16.59 mm. Its integrated functions include a polarity driver, digit drivers, segment decoders, voltage reference, and clock circuit, allowing a measurement system to use the same converter for acquisition and seven-segment display control. The ICL7107CQH+D is the leaded, ceramic-package production version of the ICL7107 family.

An ADC converts an analog input voltage into a numeric representation for measurement, display, or control. This device belongs to the display-driver ADC hierarchy: ADC → dual-slope ADC → LED display-driver ADC → integrated analog-to-digital conversion and display interface. Unlike a general-purpose ADC that requires an external display driver, the ICL7107 integrates the circuitry needed to operate a common-anode LED display directly. Its very high input impedance helps isolate the measured source from the conversion network.

The primary feature of the ICL7107CQH+D is its 3.5-digit measurement resolution. This resolution supports applications that require more indication precision than a simple one- or two-digit meter while retaining the simplicity of a dedicated panel-meter converter. Integrated display control reduces the number of external driver ICs and board-level connections. The converter architecture and display functions are provided on one monolithic device, reducing the component count of an integrated instrument panel.

The ICL7106 and ICL7107 share the same fundamental monolithic ADC concept and are specified in the same manufacturer family documentation. The key distinction is the display interface: the ICL7106 directly drives a nonmultiplexed liquid-crystal display, while the ICL7107 directly drives LED displays. This distinction is essential during component selection because exchanging these devices without reconciling the external display configuration can prevent correct operation even when the underlying conversion function is similar.

Typical uses include digital panel meters, laboratory readouts, temperature indicators, laboratory instruments, and other systems that combine a slowly varying analog measurement with a local seven-segment LED readout. The PLCC package provides 44 leads and is suited to through-hole assembly rather than compact surface-mount designs. The ceramic PLCC construction is particularly relevant when equipment uses a rugged through-hole panel-meter module or a design platform standardized around leaded display-driver ICs.

The most important design step is to implement the manufacturer’s typical application circuit, including the specified input, reference, clock, display, and bypass components. Review the pin-description table and display-drive guidance in the Analog Devices data sheet before assigning PCB connections. Because this page consolidates pricing, lifecycle information, application guidance, and related-family distinctions, it helps engineers assess fit before committing the 44-pin PLCC footprint to a new design.

Analog Devices lists the ICL7107 in production on its product page. The ICL7107CQH+D ordering code identifies the 44-pin PLCC version, while the + suffix denotes the manufacturer's lead-free ordering option. For purchasing decisions, use the exact ordering code and request a formal quote through the Request a Quote form on this page.

Pilihan pengganti yang segera untuk ICL7107CQH+D — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera ICL7107CQH+D (sama faktor bentuk dan kaki) — berbeza dalam Package, Mounting Type, Display Output, Function, Terminal Form.

Analog Devices
Package: 44-PLCC, J-lead, 16.59 mm x 16.59 mm
Mounting Type: Surface mount
Display Output: 7-segment LCD driver
Bandingkan Dengan ICL7107CQH+D →
Maxim Integrated
Package: 44-pin MQFP, 10 mm × 10 mm
Mounting Type: Surface mount
Function: 3.5-digit dual-slope ADC with direct LED display drive
Bandingkan Dengan ICL7107CQH+D →

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

ICL7107CQH+D Penilaian maksimum & Ciri-ciri Elektrik

Converter Type Dual-slope analog-to-digital converter
Pemecahkatan 3.5 digits
Display Output Direct LED display drive
Input Channels 1 channel
Integrated Functions Polarity driver, digit drivers, segment decoders, voltage reference, and clock circuit
Kemasan 44-pin PLCC, 16.59 mm × 16.59 mm
Kiraan Pin 44 pins
Jenis Pemasangan Through-hole
Package Family PLCC
Lead-Free Ordering Yes, indicated by + suffix

Panduan Konfigurasi Pin ICL7107CQH+D plcc

Konfigurasi pin untuk ICL7107CQH+D (plcc pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai plcc untuk ICL7107CQH+D

Tiada data garisan pin yang diperoleh untuk ICL7107CQH+D.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ICL7107CQH+D patut untuk 6 aplikasis: Digital Panel Meters, Laboratory Measurement Instruments, Temperature Indicator Readouts, Industrial Process Readouts, Bench Power-Supply Monitoring, Digital Thermometers and Portable Indicators.

📺

Digital Panel Meters

The ICL7107CQH+D is suitable for a digital panel meter that measures an analog voltage and presents the result on a seven-segment LED. Its 3.5-digit conversion format provides more displayed resolution than a basic one- or two-digit indicator, while the integrated digit drivers, segment decoders, and polarity driver reduce the external display-driver count. The converter is installed in a 44-pin PLCC footprint measuring 16.59 mm by 16.59 mm. Implement the input network, reference, clock, bypass, and display connections according to the manufacturer’s typical application circuit so that accuracy and display-drive timing remain consistent.

🧪

Laboratory Measurement Instruments

The ICL7107CQH+D can serve as the central measurement and display device in a laboratory instrument with a local numerical readout. The 3.5-digit dual-slope ADC converts the conditioned input, while the integrated clock and voltage-reference circuitry support a self-contained measurement channel. Direct LED drive simplifies the instrument front panel compared with a design that uses a standalone ADC and separate display driver. Because the converter has very high input impedance, it can help reduce loading of the measured source. Validate the complete analog front end and reference network against the manufacturer data sheet before claiming laboratory-grade accuracy.

🌡️

Temperature Indicator Readouts

A temperature indicator can use the ICL7107CQH+D to convert a conditioned temperature-probe signal into a 3.5-digit LED display. The integrated display functions reduce the number of components between the analog measurement stage and the visible readout, while the dual-slope architecture is appropriate for a slowly changing temperature measurement. The 44-pin PLCC package provides ample connections for the converter, display, reference, and timing functions in a through-hole meter design. Select the display’s common-anode or common-cathode configuration correctly and preserve the manufacturer’s recommended bypass and reference layout to achieve stable readings.

🏭

Industrial Process Readouts

The ICL7107CQH+D fits industrial equipment that must show a process variable locally, such as pressure, load, or supply measurements. A 3.5-digit readout is more informative than a coarse indicator, and integrating the LED drivers within the converter simplifies the display subsystem. The through-hole 44-pin PLCC package is appropriate for equipment platforms designed around leaded components and serviceable meter modules. The analog input must remain within the converter’s specified range, and the display and reference networks must follow the manufacturer’s circuit. Confirm environmental and qualification requirements separately for each finished industrial product.

⚡

Bench Power-Supply Monitoring

The ICL7107CQH+D can provide the local numeric display in a bench power-supply or power-monitor instrument. A conditioned output-voltage or current signal can be converted into a 3.5-digit result, while integrated LED drive eliminates a separate display-driver IC. This arrangement keeps the instrument readout close to the measurement electronics and provides a clear operator display. Use appropriate scaling and input protection so the converter receives only the permitted voltage range. Follow the manufacturer’s reference and bypass recommendations to reduce output instability, and verify the selected LED display polarity and segment connections on the production schematic.

📱

Digital Thermometers and Portable Indicators

The ICL7107CQH+D is appropriate for a standalone digital thermometer or portable indicator that uses an LED readout and a slowly changing sensor signal. Its 3.5-digit result provides useful display resolution, and the integrated digit and segment drivers reduce assembly complexity. The device’s very high input impedance helps when the sensor signal must pass through a high-value or high-impedance network. The 44-pin PLCC package is larger than a modern surface-mount solution, so this choice is most appropriate for through-hole products, educational instruments, or legacy meter platforms where a leaded display converter is already part of the mechanical design.

What is the ICL7107CQH+D?
The ICL7107CQH+D is a monolithic 3.5-digit dual-slope analog-to-digital converter that directly drives an LED display. According to the Analog Devices ICL7107 product page, the device integrates polarity and digit drivers, segment decoders, a voltage reference, and a clock circuit. It is packaged in a 44-pin PLCC measuring 16.59 mm by 16.59 mm, combining measurement conversion and seven-segment display control in one component.
What is the difference between ICL7106 and ICL7107?
The ICL7107 is designed to drive LED displays, whereas the ICL7106 directly drives a nonmultiplexed LCD. Analog Devices describes both as monolithic analog-to-digital converters with high input impedance and integrated display functions. The distinction is functional rather than dimensional: an ICL7106-based circuit cannot be assumed to operate an LED display correctly merely because it uses the same 44-pin PLCC footprint. Choose according to the physical display and its drive requirements.
Where can I download the ICL7107CQH+D datasheet PDF?
The official ICL7107 product page is the appropriate starting point for the manufacturer data sheet and product documentation. Analog Devices identifies the family data sheet as Data Sheet (Rev. 1), and the product page provides access to the documentation, product selection table, and ordering information. Open the datasheet link on the official product page and verify that the downloaded document covers the ICL7107 variants and the 44-pin PLCC package ordering codes.
Where can I find the ICL7107CQH+D pinout?
Use the 44-pin PLCC pin-description table in the Analog Devices ICL7107 manufacturer data sheet to identify every terminal and the exposed package geometry. The ICL7107CQH+D is specified as a 44-pin PLCC with dimensions of 16.59 mm by 16.59 mm. Because no suitable PLCC-44 diagram exists in the package library used by this page, the pin diagram field is set to null rather than presenting an unverifiable drawing. Confirm connector assignments against the manufacturer data sheet before fabrication.
How accurate is the ICL7107CQH+D?
The ICL7107CQH+D provides 3.5-digit measurement resolution in a dedicated dual-slope conversion architecture. The Analog Devices product page confirms the 3.5-digit format and the integrated reference and clock circuitry. Exact accuracy limits such as integral nonlinearity, differential nonlinearity, offset error, and gain error must be taken from the manufacturer data sheet for the selected supply, reference, and operating conditions rather than inferred from the displayed digit count.
Can I use ICL7107CQH+D for a digital panel meter?
Yes, the ICL7107CQH+D is well suited to a digital panel meter that measures an analog quantity and displays it on a seven-segment LED. Its 3.5-digit resolution, direct LED display drive, integrated segment decoder, and integrated digit and polarity drivers reduce the external driver count. The design must still implement the manufacturer’s input, reference, clock, and bypass network and must match the common-anode or common-cathode requirements of the selected display.
What can replace ICL7107CQH+D?
The ICL7107CQH+D can only be replaced safely by a device with the same 44-pin PLCC footprint, compatible terminal assignments, equivalent dual-slope conversion behavior, and a matching LED display interface. The related ICL7106 family member is not a functional drop-in replacement because it drives a nonmultiplexed LCD rather than an LED display. Use the Request a Quote form on this page to ask for an exact-MPN replacement review, including package, pinout, electrical limits, and lifecycle status.
Is ICL7107CQH+D the same as ICL7106CQH-D?
No. ICL7107CQH+D and ICL7106CQH-D are related 44-pin PLCC converters, but their display outputs are different. The ICL7107CQH+D directly drives LED displays, while the ICL7106CQH-D directly drives a nonmultiplexed LCD. The shared package does not make them interchangeable because the external display topology and drive requirements differ. Verify the intended display type and the manufacturer pin descriptions before considering either ordering code.
When should I choose ICL7107CQH+D over ICL7106CQH-D?
Choose ICL7107CQH+D when the instrument uses a seven-segment LED display and the board is standardized around the 44-pin PLCC footprint. Choose ICL7106CQH-D when the meter uses a nonmultiplexed LCD and its drive requirements match that device. Both are monolithic 3.5-digit display converters, so the decisive engineering considerations are the physical display, segment-drive topology, available board area, and qualification of the exact ordering code.
Is ICL7107CQH+D suitable for laboratory test equipment?
The ICL7107CQH+D is suitable for laboratory instruments that require a local numeric LED readout from a slowly varying analog signal. Its 3.5-digit dual-slope ADC, very high input impedance, and integrated display drivers provide a compact measurement-to-display path in a 44-pin PLCC package. For precision instrumentation, evaluate input-referred accuracy, reference stability, conversion time, and front-end protection using the manufacturer data sheet before finalizing the signal chain.
What is the lifecycle status of ICL7107CQH+D?
Analog Devices lists the ICL7107 family as production on its official product page, so the ICL7107CQH+D is treated as an active catalog part. The exact ordering code is a 44-pin PLCC, leaded version. Lifecycle status does not by itself guarantee every quantity remains immediately available, so use the Request a Quote form on this page for current stock, lead time, minimum order quantity, and scheduled delivery information.
Where can I buy ICL7107CQH+D online?
Use the Request a Quote form on this page to request the exact ICL7107CQH+D ordering code, current availability, lead time, and commercial terms. The manufacturer lists the ICL7107 as production, and the part is offered in a 44-pin PLCC package with a + lead-free suffix. Include the target quantity, shipment country, and required delivery date in the request so the supply response can be matched to the assembled product.
What is the price of ICL7107CQH+D?
The current commercial price for ICL7107CQH+D is available through the Request a Quote form on this page. Structured pricing below reflects the latest exact-MPN quantity listing identified for this product, but it is not a permanent quotation. The requested part must match the complete ordering code ICL7107CQH+D, including the 44-pin PLCC package and + suffix, because related ICL7106 and ICL7107 ordering codes may use different prices.
What is the lead time and stock status for ICL7107CQH+D?
Current stock and lead time for ICL7107CQH+D should be requested through the Request a Quote form on this page. Analog Devices identifies the ICL7107 family as production, but production status does not establish a fixed warehouse quantity or delivery interval for every package code and order size. Include the required quantity, target date, and approved-source status in the request to obtain a time-bound supply response.
What are the key specifications of ICL7107CQH+D that engineers should know?
The ICL7107CQH+D is a 3.5-digit, single-channel dual-slope ADC with direct LED display drive in a 44-pin PLCC package measuring 16.59 mm by 16.59 mm. According to the Analog Devices product page, it integrates polarity and digit drivers, segment decoders, a voltage reference, and a clock circuit. Its very high input impedance supports measurement isolation, while the integrated display circuitry reduces the need for separate display-driver ICs.

Data referensi kejuruteraan untuk ICL7107CQH+D — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ICL7107CQH+D for a through-hole instrument that measures an analog signal and displays the result on a seven-segment LED. It is a 3.5-digit dual-slope converter with integrated LED digit and segment drive, clock, voltage reference, and polarity driver in a 44-pin PLCC package. Select the ICL7106CQH-D instead when the instrument uses a nonmultiplexed LCD, because its display output is not functionally interchangeable with the ICL7107. Consider the ICL7116CQH+D only as a related family requiring a fresh comparison of electrical limits, terminal functions, and display timing. For new compact products, verify whether the larger leaded PLCC package fits the mechanical design. For existing ICL7107 meter platforms, retain the exact ordering code unless a replacement has been checked against every pin, the display configuration, supply limits, timing, and qualification requirements.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 44-pin PLCC (16.59 mm × 16.59 mm)
Brand Analog Devices
Converter Architecture Dual-slope ADC
Resolution 3.5 digits
Display Type Direct LED display drive
Input Channels 1 channel
Integrated Clock Yes
Integrated Voltage Reference Yes
Mounting Style Through-hole PLCC
Lifecycle Status Production
Ordering Suffix + lead-free

Penyeberangsung Jelas

  • Integrated LED display control (vsICL7106CQH-D)
  • Measurement resolution in a display-driver converter (vsICL7106CQH-D)
  • Production status from the original manufacturer (vsICL7116CQH+D)

Catatan Desain

Implement the ICL7107CQH+D around the manufacturer’s typical application circuit and assign every one of the 44 PLCC terminals from the official pin-description table. Place the input, reference, clock, and bypass components at the locations shown in the application circuit, and route the seven-segment display outputs away from sensitive analog inputs. The 16.59 mm × 16.59 mm ceramic PLCC footprint requires adequate spacing around the leads for soldering, inspection, and through-hole assembly.

Keep the analog input and reference routing short, with a continuous ground reference beneath the sensitive section where the package and board construction permit. Decouple supply pins at the IC rather than sharing long supply traces among several display-related loads. Because the ICL7107CQH+D combines an analog conversion channel with digital display outputs, route display-driver currents away from the input and reference nodes to reduce coupling into the measured signal.

Do not substitute the ICL7106CQH-D for the ICL7107CQH+D without changing the display interface. The ICL7106 directly drives a nonmultiplexed LCD, while the ICL7107 directly drives an LED display, even though related family members can use the same 44-pin PLCC package. Also verify the display’s common-anode or common-cathode arrangement, segment mapping, and digit-driver polarity against the manufacturer documentation before releasing PCB artwork.

Use the manufacturer’s specified supply range and bypass network for the converter and display subsystem. The ICL7107’s integrated voltage reference and clock simplify the architecture, but they do not remove the need for clean local supply decoupling. Confirm the display current, converter supply requirement, and reference configuration independently, then validate startup and display readability at the minimum and maximum expected supply conditions.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Yes
Bosong halogen
Unknown
Mineral konflik
Unknown

The + suffix indicates the lead-free ordering option. No explicit RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals statement was identified for this exact ordering code.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ICL7107CQH+D datasheet ICL7107CQH+D pinout ICL7107CQH+D datasheet pdf ICL7107CQH+D price ICL7107CQH+D stock Analog Devices ICL7107CQH+D ICL7107CQH+D equivalent ICL7107CQH+D replacement ICL7107CQH+D vs ICL7106CQH-D ICL7107 44-pin PLCC display driver ICL7107CQH+D digital panel meter ICL7107 3.5 digit LED ADC

Komponen dan Tanda berkaitan

Analog Devices ICL7107CQH+D ICL7107 ICL7106CQH-D ICL7116CQH+D ICL7107CQH+TD analog-to-digital converter ADC dual-slope ADC LED display-driver ADC integrated circuit semiconductor 3.5-digit conversion seven-segment LED display segment decoder digit driver polarity driver voltage reference clock circuit high input impedance 44-pin PLCC PLCC lead-free digital panel meter laboratory instrument
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ