Renesas Electronics

ISL81487IP - 5V RS-485/RS-422 Half-Duplex Transceiver | Renesas

MPN: ISL81487IP ✓ Aktif
5 V Vdss RS-485 and RS-422 Rds(on) 8-PDIP Package
MOQ: 1 |

ISL81487IP Ringkasan

Renesas Electronics ISL81487IP is a 5 V, half-duplex RS-485/RS-422 interface transceiver with one driver and one receiver, a fractional 1/8 unit-load design, low power consumption, and an 8-PDIP package. The device supports both high-speed operation and slew-rate-limited communication, making it suitable for balanced industrial data links.

An RS-485/RS-422 transceiver is an interface IC that converts between single-ended logic signals and differential, balanced bus signals. A differential receiver rejects common-mode noise, while the balanced driver improves signal integrity and interoperability over cables and long printed-circuit-board traces. In the signal-chain hierarchy, this component is a line transceiver, an interface IC, and part of a broader industrial communication and data-conversion system.

The ISL81487IP combines a 5 V supply with a 1/8 unit-load receiver characteristic. Fractional unit loading permits more receiving nodes on the same bus than a full-unit-load receiver, which is valuable in multi-drop RS-485 networks. Its BiCMOS implementation combines low power use with high input impedance, while the balanced differential interface supports both RS-485 and RS-422 point-to-point or multidrop communication.

The family supports two operating profiles: a high-speed profile for data-transfer links and a slew-rate-limited profile for reduced electromagnetic interference and improved control of bus-edge transitions. This flexibility allows the same physical interface concept to address factory automation, instrumentation, and industrial control networks. Package-level ESD protection is specified for the related ISL81487E family at ±15 kV HBM without latch-up.

Typical uses include isolated and non-isolated industrial RS-485 buses, RS-422 links between controllers and peripherals, data acquisition systems, barcode or identification equipment, and embedded control modules. The 1/8 unit-load characteristic is particularly useful where the bus contains multiple receivers, while the through-hole 8-PDIP format supports prototype boards, legacy control equipment, and repair assemblies.

When connecting the ISL81487IP to a multidrop bus, use a termination strategy appropriate for the cable length, topology, and baud rate. Keep the differential pair routed with continuous return-path reference, avoid unnecessary stubs, and place interface-protection components close to the connector. The driver enable and receiver enable functions must also be controlled correctly when the same transceiver supports half-duplex operation.

This product record combines the manufacturer family information with practical interface guidance, verified drop-in candidates, and a parameter-by-parameter comparison. It is designed to help engineers confirm package compatibility, bus loading, ESD capability, and replacement suitability before incorporating the ISL81487IP into an RS-485 or RS-422 design.

Pilihan pengganti yang segera untuk ISL81487IP — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

ISL81487EIP

✅ Masuk Drop-In
📦 8-PDIP
Same 5 V supply, 1/8 unit load, and RS-485/RS-422 function; the E-family option adds an explicit slew-rate-limited profile and ±15 kV HBM ESD protection while changing data rate by 0 V and unit load by 0.

📋 Alternatif rujukan (tidak dalam katalog)

ISL81487LIP

✅ Masuk Drop-In
📦 8-PDIP
Same 5 V and 1/8-unit-load RS-485/RS-422 family in an 8-pin DIP; supply and unit-load differences are 0 V and 0, with operating-speed option requiring confirmation.

📋 Alternatif rujukan (tidak dalam katalog)

ISL81487LIPZ

✅ Masuk Drop-In
📦 8-PDIP
Same 5 V, 1/8-unit-load RS-485/RS-422 family and 8-pin leaded package; supply and unit-load differences are 0 V and 0, while the L-family speed profile may differ.

📋 Alternatif rujukan (tidak dalam katalog)

ISL81487EIPZ

✅ Masuk Drop-In
📦 8-PDIP
Same 5 V and 1/8-unit-load interface in the 8-pin leaded family; supply and unit-load differences are 0 V and 0, with explicit ±15 kV HBM ESD protection in the E-family option.

📋 Alternatif rujukan (tidak dalam katalog)

ST485EBN

✅ Masuk Drop-In
📦 8-PDIP
Same 5 V, half-duplex RS-485/RS-422 and ±15 kV HBM ESD class; supply and ESD-rating differences are 0 V and 0 kV, with enable timing and maximum data rate requiring final verification.

📋 Alternatif rujukan (tidak dalam katalog)

ISL81487IP Spesifikasi

Product Type Single RS-485/RS-422 transceiver
Configuration 1 driver / 1 receiver, half-duplex
Tegangan Pemberi Arus 5 V
Receiver Unit Load 1/8 unit load
Interface Standards RS-485 and RS-422
Process Technology BiCMOS
Operating Mode High-speed or slew-rate limited
Kemasan 8-PDIP
Jenis Pemasangan Through-hole
ESD Protection ±15 kV HBM for the related ISL81487E family
Latch-Up Resistance Protected without latch-up for the related ISL81487E family
Minimum Load Specification 10% tolerance specified for the related ISL81487E family

Panduan Konfigurasi Pin ISL81487IP 8-pdip

Konfigurasi pin untuk ISL81487IP (8-pdip pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 8-pdip untuk ISL81487IP

Tiada data garisan pin yang diperoleh untuk ISL81487IP.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

ISL81487IP patut untuk 6 aplikasis: Industrial RS-485 Control Bus, RS-422 Point-to-Point Data Link, Data Acquisition and Instrumentation, Embedded Controller Communication Port, Building Automation and Environmental Monitoring, Legacy Equipment and Communication Repair.

🏭

Industrial RS-485 Control Bus

The ISL81487IP fits industrial control buses because it combines a 5 V supply with a 1/8 unit-load receiver, allowing more receiving nodes to share the same differential pair than a one-unit-load design would permit. It is installed between a host controller and RS-485 peripherals, with the driver enabled only while transmitting. The balanced interface helps reject common-mode noise encountered around motors, relays, and factory automation equipment. Confirm the final baud rate against the family data rate, use termination only at the intended cable endpoints, and preserve a continuous ground reference along the bus.

🌐

RS-422 Point-to-Point Data Link

The ISL81487IP can form one side of an RS-422 point-to-point link between a controller and a remote peripheral. The one-driver, one-receiver, half-duplex arrangement supports command and response traffic while the 5 V operation aligns with conventional industrial logic supplies. Its balanced differential signaling reduces susceptibility to common-mode noise relative to single-ended communication. Choose a differential pair with controlled impedance, keep the driver disabled during receive intervals, and validate cable length against the required data rate and the manufacturer's propagation-delay characteristics.

🔧

Data Acquisition and Instrumentation

The ISL81487IP is appropriate for laboratory and industrial data-acquisition equipment that must transfer measurements across a longer balanced cable rather than relying on a short point-to-point logic connection. The receiver's 1/8 unit-load characteristic supports shared buses with multiple instrument nodes, while the half-duplex architecture limits the number of physical conductors. Place the transceiver close to the external connector, provide surge and ESD protection at the interface boundary, and use the family’s slew-rate-limited or high-speed profile according to the cable length and measured channel requirements.

🖥️

Embedded Controller Communication Port

The ISL81487IP can add a wired balanced communication port to an embedded controller that already operates from a 5 V rail. The transceiver converts the controller's logic-level transmit and receive signals to a differential bus, simplifying integration with RS-485 remote I/O or RS-422 peripherals. Its through-hole 8-PDIP package also supports educational, prototype, repair, and legacy automation boards. The design must interlock driver and receiver enables properly, and firmware should account for the half-duplex turnaround delay and the propagation delay specified for the selected family variant.

🧩

Building Automation and Environmental Monitoring

The ISL81487IP is suitable for building-automation panels and environmental-monitoring nodes where sensors, controllers, or monitoring stations communicate over a wired balanced network. Its 1/8 unit-load receiver can reduce bus loading when multiple distributed nodes are present, and the 5 V supply supports low-power embedded equipment. Route the differential pair away from switching power stages and high-current relays, use a proper common reference within the RS-485 application constraints, and include connector-level surge protection for cables that leave the enclosure.

🔧

Legacy Equipment and Communication Repair

The ISL81487IP through-hole package makes it useful for repairing or extending legacy RS-485 and RS-422 equipment that uses an 8-pin DIP transceiver. The one-driver, one-receiver configuration matches the common half-duplex bus architecture found in older industrial controllers, converters, and interface adapters. Before installation, compare the replacement's enable polarity and timing with the failed device, inspect the board for compromised copper and damaged isolation components, and verify the bus's termination and biasing arrangement. If the original assembly used a different speed-control profile, confirm propagation delay and maximum data rate before energizing the circuit.

Ringkasan Produk Disebarkan

ISL81487EIP Same-family RS-485/RS-422 transceiver alternative Dipergunakan di: Industrial RS-485 Control Bus, RS-422 Point-to-Point Data Link, Embedded Controller Communication Port, Legacy Equipment and Communication Repair ISL81487LIP Low-power family transceiver alternative Dipergunakan di: Industrial RS-485 Control Bus, Data Acquisition and Instrumentation, Building Automation and Environmental Monitoring, Legacy Equipment and Communication Repair ST485EBN Cross-brand half-duplex interface transceiver Dipergunakan di: RS-422 Point-to-Point Data Link, Building Automation and Environmental Monitoring ISL81487LIPZ Same-family leaded-package alternative Dipergunakan di: Data Acquisition and Instrumentation, Legacy Equipment and Communication Repair ISL81487EIPZ ESD-protected same-family option Dipergunakan di: Embedded Controller Communication Port
What is the operating voltage of ISL81487IP?
The ISL81487IP operates from a single 5 V supply. According to the Renesas manufacturer datasheet for the ISL81487 family, the device is a 5 V BiCMOS RS-485/RS-422 transceiver. This supply arrangement suits industrial control systems that already provide a regulated 5 V rail and simplifies the power design compared with dual-supply interface circuits.
What type of interface is ISL81487IP?
The ISL81487IP is a one-driver, one-receiver, half-duplex RS-485/RS-422 transceiver in an 8-PDIP package. The Renesas manufacturer datasheet identifies it as a fractional-load BiCMOS device. It converts logic-level signals to balanced differential bus signals and reverses that process when receiving, supporting both RS-422 links and multidrop RS-485 networks.
What is the receiver unit load of ISL81487IP?
The ISL81487IP has a receiver unit-load rating of 1/8 unit load. According to the Renesas manufacturer datasheet, the fractional loading allows more receivers to share a bus than a conventional one-unit-load receiver. Actual node count still depends on cable length, topology, baud rate, termination, and the characteristics of every connected receiver.
Where can I download the ISL81487IP datasheet PDF?
The ISL81487IP datasheet can be downloaded through the Renesas ISL81487 family document page at https://www.renesas.com/en/document/dst/isl8487e-isl81487l-isl81487e-datasheet. The manufacturer document covers the ISL8487E, ISL81487L, and ISL81487E family members. Use its pin-description and electrical tables when assigning connector, termination, and supply connections.
Where can I find the ISL81487IP pinout?
The ISL81487IP pin assignment is shown in the pin-description table of the Renesas manufacturer datasheet for the ISL81487 family. The device uses an 8-PDIP through-hole outline with standard counterclockwise numbering. Confirm the exact RE, DE, driver-output, receiver-input, supply, and ground connections before building or repairing a board.
What can replace ISL81487IP on the same 8-pin PCB?
The ISL81487EIP is the closest same-package replacement identified because it is also offered as an 8-pin DIP RS-485/RS-422 transceiver with the same 5 V and fractional-load device family. Other family members may differ in speed-control or temperature options, so verify the driver enable behavior, receiver enable polarity, propagation delay, and transceiver mode before production use.
Is ISL81487IP suitable for multidrop RS-485 networks?
Yes, the ISL81487IP is suitable for multidrop RS-485 networks because it uses a fractional 1/8 unit-load receiver. The Renesas manufacturer datasheet identifies the device as meeting both RS-485 and RS-422 requirements. For a multidrop bus, use only one driver active at a time and implement termination consistent with the physical topology.
How does ISL81487IP differ from ISL81487EIP?
Both devices belong to the same 5 V, fractional-load RS-485/RS-422 family and are available in an 8-pin through-hole format. The manufacturer information identifies the E-family member as providing an explicitly slew-rate-limited operating option and ±15 kV HBM ESD protection. Confirm the exact ISL81487IP speed and ESD ratings in its ordering information before treating the two as equivalent.
When should I choose ISL81487IP over a lower-speed slew-rate-limited transceiver?
Choose ISL81487IP when an RS-485 or RS-422 design requires the family's high-speed operating option rather than a deliberately slew-rate-limited interface. Slew-rate limiting can reduce edge-related EMI and ringing on slower buses, while a high-speed profile is preferable when link timing and throughput are the priority. Final selection depends on the required baud rate and channel qualification.
What is the best STMicroelectronics equivalent for ISL81487IP?
The ST485EBN is the cross-brand candidate identified for comparison because the manufacturer cross-reference material associates it with the same low-power, half-duplex RS-485/RS-422 transceiver class and ±15 kV HBM ESD protection. Confirm its 8-PDIP footprint, pin mapping, enable logic, data rate, and supply-current limits against the ISL81487IP before approving it as a drop-in replacement.
Where can I buy ISL81487IP and check its current lead time?
Use the Request a Quote form on this XAIPART product page to request ISL81487IP availability, current lead time, and order handling. The part is listed by authorized distribution channels as an 8-PDIP RS-422/RS-485 transceiver, but actual inventory and delivery timing can change. The quote form is the appropriate route for a current sourcing response.
What is the price of ISL81487IP?
Use the Request a Quote form on this page for the current ISL81487IP unit price and quantity breaks. Commercial terms and availability can vary with order quantity, date, and supply status, so a static figure should not be used for budgeting or purchasing. Submit the required quantity, target date, and shipment location with the request.
Is ISL81487IP in stock?
Current ISL81487IP stock should be confirmed through the Request a Quote form on this page. Distributor listings identify the device as an orderable 8-PDIP transceiver, but inventory quantities can change rapidly and may differ by package code. Provide your required quantity and delivery schedule so the current supply position can be checked.
How should the ISL81487IP be terminated on an RS-485 bus?
Terminate the RS-485 differential pair at the physical ends of the cable when long runs, high noise, or high baud rates make reflections likely. The Renesas manufacturer application guidance for the ISL81487 family should be used with the board's cable length and topology. Do not terminate every node, and keep the termination close to the bus connector.
What are the key specifications of ISL81487IP that engineers should know?
The principal ISL81487IP specifications are a 5 V supply, one-driver and one-receiver half-duplex configuration, 1/8 unit-load receiver, RS-485 and RS-422 support, and an 8-PDIP package. The manufacturer also describes the family as low-power BiCMOS with high-speed or slew-rate-limited operation. Use the family datasheet for maximum data rate, propagation delay, and exact ESD limits.

Data referensi kejuruteraan untuk ISL81487IP — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the ISL81487IP when a design requires a 5 V, half-duplex RS-485/RS-422 interface with a fractional 1/8 unit-load receiver and an 8-PDIP footprint. Select ISL81487EIP or ISL81487EIPZ when the same family configuration is wanted with an explicitly identified ±15 kV HBM ESD-protected option and a slew-rate-limited profile. Use ISL81487LIP or ISL81487LIPZ when its documented speed-control profile better matches a low-power or EMI-sensitive design. Consider ST485EBN as a cross-brand option after confirming enable polarity, propagation delay, maximum data rate, and exact pin mapping. In every case, compare the transceiver mode, receiver thresholds, bus loading, ESD rating, operating temperature, and cable-endpoint termination with the system requirements before releasing the replacement.

Perbandingan dengan Gantian

Parametr Produk Ini ISL81487EIP ISL81487LIP ISL81487LIPZ ISL81487EIPZ ST485EBN
Package 8-PDIP 8-PDIP 8-PDIP 8-PDIP 8-PDIP 8-PDIP
Brand Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics Renesas Electronics STMicroelectronics
Supply Voltage 5 V 5 V 5 V 5 V 5 V 5 V
Receiver Unit Load 1/8 unit load 1/8 unit load 1/8 unit load 1/8 unit load 1/8 unit load 1/8 unit load
Transceiver Configuration 1 driver / 1 receiver, half-duplex 1 driver / 1 receiver, half-duplex 1 driver / 1 receiver, half-duplex 1 driver / 1 receiver, half-duplex 1 driver / 1 receiver, half-duplex 1 driver / 1 receiver, half-duplex
Supported Interfaces RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422 RS-485 and RS-422

Penyeberangsung Jelas

  • Maintains the same core bus-loading characteristic (vsST485EBN)
  • Same-package family replacement with explicit ESD option (vsISL81487EIP)
  • Supports both high-speed and slew-rate-limited communication (vsISL81487LIP)

Catatan Desain

Route the differential pair as a continuous impedance-controlled pair from the transceiver to the connector, and keep it away from switching regulators, relays, and high-current return paths. The balanced receiver reduces susceptibility to common-mode noise, but common-mode range and ground-reference limitations still apply. Confirm that the board’s ground topology satisfies the RS-485 application guidance before finalizing the interface return conductor.

Do not enable the driver and receiver paths simultaneously when they share the same bus pins in half-duplex mode. Firmware or hardware should interleave driver enable and receiver enable around the transmission turnaround interval. Also avoid placing termination resistors at every node; use them only at the physical endpoints of the cable and according to the selected baud rate, cable length, and topology.

Choose the high-speed or slew-rate-limited operating profile according to channel length and EMI requirements. A slower controlled edge can reduce ringing and radiated emissions, while a high-speed profile supports greater throughput. Validate the selected family member with the longest intended cable, realistic termination, industrial noise levels, and the system’s required bit rate before releasing the design.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The interface IC is not presented as an automotive-qualified AEC-Q100 product. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or the orderable part documentation.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

ISL81487IP datasheet ISL81487IP pinout ISL81487IP datasheet pdf ISL81487IP equivalent ISL81487IP replacement ISL81487IP cross reference ISL81487IP price ISL81487IP stock Renesas ISL81487IP ISL81487IP 8-PDIP pinout ISL81487IP RS-485 application circuit ISL81487IP vs ISL81487EIP

Komponen dan Tanda berkaitan

Renesas Electronics ISL81487IP ISL81487EIP ISL81487LIP ISL81487LIPZ ISL81487EIPZ ST485EBN RS-485 RS-422 RS-485/RS-422 transceiver half-duplex transceiver differential receiver balanced differential signaling BiCMOS 1/8 unit load 5 V transceiver 8-PDIP DIP package family through-hole package surface mount ESD protection ±15 kV HBM industrial control bus data acquisition building automation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ