Microchip Technology

KSZ8863MLLI-TR - 3-Port 10/100 Managed Ethernet Switch | Microchip (Tape & Reel)

MPN: KSZ8863MLLI-TR ✓ Aktif
48-LQFP, 7 mm x 7 mm Package
MOQ: 1 |

KSZ8863MLLI-TR Ringkasan

The Microchip Technology KSZ8863MLLI-TR is a highly integrated, three-port managed Ethernet switch with 10/100 Mbps support, I2C and SPI host interfaces, one MII interface, and fiber support in a 48-pin LQFP package measuring 7 mm by 7 mm. It is designed for compact, cost-sensitive, and power-efficient networking systems.

An Ethernet switch is a semiconductor that connects multiple local network nodes and manages traffic between network ports. This device belongs to the managed Ethernet switch hierarchy, where integrated PHYs, a switching fabric, and host-register control support small embedded networks without requiring a discrete Ethernet switch design. The KSZ8863 family combines copper and fiber connectivity options in a small package.

Three integrated 10/100 Mbps ports support low-port-count network designs, while auto-negotiation follows Clause 28 of the IEEE 802.3u specification. That protocol lets connected devices select a common operating mode. I2C and SPI interfaces provide host access to device functions, while the MII interface supports connection to an external network controller. Advanced power management is specifically identified as a family feature for reducing system power consumption.

The KSZ8863MLLI-TR is one of three internal-bonding configurations designated MLL, FLL, and RLL. Microchip states that these configurations are not interchangeable because their internal bonding differs and the mode cannot be changed through an external pin or register setting. The selected configuration therefore remains a manufacturing and design-selection decision rather than a runtime configuration option.

Typical uses include industrial Ethernet control, embedded gateways, industrial equipment networking, compact network switches, and systems that need a managed three-port Ethernet switch with copper or fiber uplink support. The 48-LQFP construction is suitable for conventional surface-mount PCB assembly rather than the very smallest leadless packages.

Designers should treat the MLL suffix as functionally significant, preserve the manufacturer's recommended decoupling and clock circuitry, and route high-speed Ethernet and MII signals with controlled impedance. Before layout release, use the manufacturer pin-description table and application schematic to assign all 48 pins, especially power, ground, reset, management, PHY, and media-interface signals.

This page organizes the KSZ8863MLLI-TR's verified switching, interface, packaging, and compliance characteristics, clarifies why the MLL, FLL, and RLL variants cannot be substituted, and provides practical application guidance for engineers designing compact managed Ethernet equipment.

Pilihan pengganti yang segera untuk KSZ8863MLLI-TR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Tiada pilihan pengganti yang segera untuk produk ini.

Minta Alternatif

KSZ8863MLLI-TR Penilaian maksimum & Ciri-ciri Elektrik

Number of Ports 3 ports
Ethernet Data Rate 10/100 Mbps
Device Type Managed Ethernet switch with integrated PHYs
Host Interface I2C and SPI
Media Interface 1 MII interface
Fiber Support Supported
Kemasan 48-LQFP, 7 mm x 7 mm
Jenis Pemasangan Surface mount
Auto-Negotiation Standard IEEE 802.3u, Clause 28
Auto-Negotiation Function Selects the best common operating mode with the link partner
Power Management Advanced power management
Power Consumption Low-power design
Maximum Data Rate per Port 100 Mbps

Panduan Konfigurasi Pin KSZ8863MLLI-TR 48-lqfp, 7 mm x 7 mm

Konfigurasi pin untuk KSZ8863MLLI-TR (48-lqfp, 7 mm x 7 mm pakai). Penomeran pin, fungsi, dan garis bentuk koneksi ditakrifkan dalam dokumen pengeluar. Rujuk dokumen untuk kebentuk dan pedoman pengasman.

Garis bentuk pengecah pakai 48-lqfp, 7 mm x 7 mm untuk KSZ8863MLLI-TR

Tiada data garisan pin yang diperoleh untuk KSZ8863MLLI-TR.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

KSZ8863MLLI-TR patut untuk 6 aplikasis: Industrial Ethernet Controller, Embedded Network Gateway, Compact Managed Network Switch, Industrial Equipment Networking, Network Interface Expansion, Low-Power IoT Edge Node.

🏭

Industrial Ethernet Controller

The KSZ8863MLLI-TR fits compact industrial controllers that need three managed 10/100 Mbps Ethernet connections in one package. A controller can use the integrated PHYs for copper links, I2C or SPI for host configuration, and the MII interface when connection to an appropriate controller block is required. The three-port architecture avoids the space and power burden of a larger switch platform while supporting Clause 28 auto-negotiation. Because the KSZ8863MLLI-TR also offers fiber support, the same design can address longer-reach or noise-isolated links when the board implementation supports fiber.

🌐

Embedded Network Gateway

Embedded gateways benefit from the KSZ8863MLLI-TR because three managed 10/100 Mbps ports can connect local devices through integrated PHYs while a host configures the switch through I2C or SPI. The device is positioned for cost-sensitive, power-efficient switch systems, making it suitable for gateways with a small port count rather than a large enterprise topology. Its 48-LQFP package also provides a practical surface-mount assembly option for compact embedded boards. The MLL bonding option must remain fixed because Microchip states that the MLL, FLL, and RLL modes cannot be changed externally.

🖥️

Compact Managed Network Switch

The KSZ8863MLLI-TR can serve as the core switching element in a compact managed Ethernet switch for equipment networks, branch nodes, or specialized control cabinets. Three 10/100 Mbps ports provide a useful low-port-count topology for local traffic, while I2C and SPI allow a supervising controller to access management functions. Clause 28 auto-negotiation supports operation with compatible link partners without manual speed selection. The manufacturer identifies advanced power management as a family feature, which is important in systems where many small network nodes operate continuously.

⚙️

Industrial Equipment Networking

For industrial equipment networking, the KSZ8863MLLI-TR combines three managed 10/100 Mbps ports with host-control interfaces in a single device. This can simplify boards that need several local Ethernet connections for sensors, motion subsystems, service interfaces, or supervisory controls. Copper ports can support standard network links, while fiber support can be considered where electrical isolation or longer-distance communication is beneficial. Designers should verify the exact operating-temperature limits and supply range for the target machine environment before releasing the production design.

🔧

Network Interface Expansion

The KSZ8863MLLI-TR is useful when an embedded controller has insufficient network-port capacity and the system needs a small, managed Ethernet expansion. I2C or SPI host access provides a route for configuration, while the MII interface allows a compatible external controller path to be integrated with the switch function. Auto-negotiation across the 10/100 Mbps ports helps simplify link establishment across equipment with different supported rates. The design should reserve all pins defined for the MLL configuration and use the manufacturer reference schematic to preserve the intended internal bonding and signal behavior.

🧩

Low-Power IoT Edge Node

A low-power IoT edge node can use the KSZ8863MLLI-TR when it needs three managed 10/100 Mbps connections without adopting a large switch ASIC. The family's power-efficient design target supports compact equipment that bridges sensors, local controllers, and upstream network services. I2C or SPI management allows a low-power host processor to configure port behavior, and Clause 28 auto-negotiation simplifies interoperability with 10/100 Mbps link partners. For battery- or power-limited deployments, engineers should evaluate the complete board power budget because the managed switch must operate alongside the processor, PHYs, magnetics, and external components.

What is the KSZ8863MLLI-TR?
The KSZ8863MLLI-TR is a Microchip Technology managed Ethernet switch with three 10/100 Mbps ports, integrated PHYs, I2C and SPI host interfaces, one MII interface, and fiber support. It is packaged in a 48-LQFP measuring 7 mm by 7 mm. According to the Microchip KSZ8863 product page, the device targets compact, cost-sensitive, and power-efficient 10/100 Mbps switch systems.
How many Ethernet ports does the KSZ8863MLLI-TR have?
The KSZ8863MLLI-TR has three Ethernet switch ports operating at 10/100 Mbps. The manufacturer describes the KSZ8863 family as a highly integrated three-port switch with integrated PHYs. This makes it suitable for equipment that needs a small managed Ethernet segment, such as an industrial controller, embedded gateway, or compact network appliance, without implementing a larger external switching platform.
What interfaces are available on the KSZ8863MLLI-TR?
The KSZ8863MLLI-TR provides I2C and SPI interfaces for host control and one MII interface for an appropriate external MAC or controller connection. According to the DigiKey product listing, the device combines an Ethernet switch, integrated 10/100 Base-T/TX PHYs, and I2C/SPI control in one 48-LQFP package. These interfaces support both managed configuration and structured network-port connectivity.
Where can I download the KSZ8863MLLI-TR datasheet PDF?
The official KSZ8863MLLI-TR datasheet PDF is available from Microchip Technology at the product-datasheet link on this page. It is titled KSZ8863MLL/FLL/RLL Integrated 3-Port 10/100 Managed Switch with PHYs. The document also covers the other family configurations, so use the MLL-specific pin and internal-bonding information when designing a board that must match KSZ8863MLLI-TR exactly.
Can KSZ8863FLLI or KSZ8863RLLI replace KSZ8863MLLI-TR?
No. Microchip explicitly states that the MLL, FLL, and RLL versions are not interchangeable because they use different internal bonding, and the operating mode cannot be changed through an external pin or register setting. Although the versions belong to the same KSZ8863 family and can share a package family, FLL and RLL are not pin-compatible drop-in replacements for the MLL configuration.
What is the best drop-in replacement for KSZ8863MLLI-TR?
No verified drop-in replacement for KSZ8863MLLI-TR is identified. The closest suffix variants, KSZ8863FLLI and KSZ8863RLLI, are expressly not interchangeable because their internal bonding differs. A replacement should therefore be treated as a redesign unless the manufacturer confirms identical pin functions, PHY arrangement, management registers, clocking, and internal-bonding configuration for the proposed part.
Is KSZ8863MLLI-TR suitable for industrial Ethernet equipment?
The KSZ8863MLLI-TR is architecturally suitable for industrial Ethernet equipment requiring three managed 10/100 Mbps ports in a compact surface-mount package. Its advanced power management, auto-negotiation, host-control interfaces, and fiber support make it relevant to controllers and gateways with constrained board space. The exact temperature range, supply limits, and qualification status must be checked before release for a specific industrial environment.
KSZ8863MLLI-TR vs KSZ8863MLL - are they the same part?
KSZ8863MLLI-TR and KSZ8863MLL identify the same MLL device configuration, but the final suffix can encode orderable packaging or delivery information. Microchip's family documentation covers KSZ8863MLL, KSZ8863FLL, and KSZ8863RLL, while the I suffix is used in the complete ordering designation KSZ8863MLLI-TR. Confirm the package marking and orderable suffix on the manufacturer's product page before procurement.
When should I choose KSZ8863MLLI-TR over another Ethernet switch?
Choose the KSZ8863MLLI-TR when a design needs exactly three managed 10/100 Mbps ports, I2C and SPI host control, one MII interface, integrated PHYs, and optional fiber connectivity in a 7 mm by 7 mm LQFP. It is less suitable when a project requires different port counts, higher line rates, a smaller leadless footprint, or a proven drop-in alternative. Those requirements should be compared against the manufacturer's electrical limits and pin map.
How does the KSZ8863MLLI-TR support auto-negotiation?
The KSZ8863MLLI-TR conforms to the auto-negotiation protocol defined in Clause 28 of the IEEE 802.3u specification. According to the manufacturer datasheet, auto-negotiation allows unshielded twisted-pair link partners to select the best common mode of operation. This supports automatic establishment of 10/100 Mbps operation while reducing the configuration burden on the host system.
What can replace the KSZ8863MLLI-TR?
A verified pin-to-pin replacement cannot be named without risking an incompatible design. KSZ8863FLLI and KSZ8863RLLI share the broader product family but are not substitutes because their internal bonding and operating mode differ. The manufacturer should be consulted for an approved MLL equivalent, or the product should be redesigned around a different switch after checking port count, PHY type, MII implementation, management interface, clocking, and package pins.
Is KSZ8863MLLI-TR the same as KSZ8863FLLI?
No. Although KSZ8863MLLI-TR and KSZ8863FLLI are members of the same three-port managed-switch family, Microchip states that MLL, FLL, and RLL are not interchangeable. Their internal bonding differs, and the mode cannot be selected by an external pin or writable register. Installing the FLL variant in an MLL design may therefore prevent correct operation despite the similar package and product description.
What are the key specifications of KSZ8863MLLI-TR that engineers should know?
The KSZ8863MLLI-TR combines three 10/100 Mbps managed Ethernet ports, I2C and SPI host interfaces, one MII interface, integrated PHYs, and fiber support in a 48-LQFP package measuring 7 mm by 7 mm. According to Microchip, it supports Clause 28 auto-negotiation and advanced power management. The MLL internal-bonding configuration is critical because it cannot be changed through pins or registers.
Where can I find the KSZ8863MLLI-TR pinout?
Use the pin-description table in the official Microchip KSZ8863MLL/FLL/RLL datasheet PDF for the authoritative 48-pin assignment. The manufacturer package is a 7 mm by 7 mm LQFP, but the MLL, FLL, and RLL bonding options affect internal implementation. Assign PCB power, ground, management, PHY, MII, clock, reset, and fiber-related pins from the MLL pin table rather than inferring them from a family diagram.
Where to buy KSZ8863MLLI-TR online?
Use the Request a Quote form on this page to ask for KSZ8863MLLI-TR availability, order quantities, lead time, and shipment details. The Request a Quote workflow gives buyers a direct path for current sourcing without relying on potentially stale listing text. Specify the complete KSZ8863MLLI-TR designation, quantity, and reel or tray preference when submitting the request.
What is the price of KSZ8863MLLI-TR?
Current KSZ8863MLLI-TR pricing is obtained through the Request a Quote form on this page. Quote-based handling allows the order quantity, package preference, supply status, and current component availability to be checked together. Use the form rather than relying on an old listing value, and request the required production quantity and date needed by the project.
What is the lead time for KSZ8863MLLI-TR?
Request the current KSZ8863MLLI-TR lead time through the Request a Quote form on this page. Include the required quantity, target delivery date, and acceptable packaging format so the sourcing response can reflect the actual order. The manufacturer lists the device as an active family member, but a project-specific manufacturing and allocation schedule is still required for planning.

Data referensi kejuruteraan untuk KSZ8863MLLI-TR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

The KSZ8863MLLI-TR is appropriate when a new design needs exactly three managed 10/100 Mbps ports, integrated PHYs, I2C and SPI host control, one MII interface, and fiber support in a 48-LQFP package. It is particularly useful in compact industrial controllers, embedded gateways, and low-port-count managed switches where board space and power efficiency matter. Do not select it when a true drop-in supply-chain alternative is required: Microchip states that the closely related FLL and RLL configurations are not interchangeable because their internal bonding differs and cannot be changed through pins or registers. For higher port counts, faster Ethernet, or a smaller leadless package, a different device family is necessary. Before final release, verify the exact MLL pinout, supply range, temperature range, external clock or crystal requirements, reference decoupling, and PCB layout against the current manufacturer documentation.

Perbandingan dengan Gantian

Parametr Produk Ini
Package 48-LQFP, 7 mm x 7 mm
Brand Microchip Technology
Number of Ethernet Ports 3 ports
Maximum Data Rate 10/100 Mbps
Host Interfaces I2C and SPI
Media Interface 1 MII interface
Fiber Support Supported
Auto-Negotiation IEEE 802.3u, Clause 28
Internal-Bonding Configuration MLL; not interchangeable with FLL or RLL

Catatan Desain

Place the manufacturer's recommended power, decoupling, crystal or clock, and reset components exactly as shown in the official KSZ8863MLL/FLL/RLL reference schematic. Route Ethernet pairs as controlled-impedance differential links, minimize stub branches, and provide a continuous return path beneath each pair. Keep switching nodes and high-current supply paths away from MII and management signals to reduce coupling into sensitive timing and communication circuits.

Treat the MLL suffix as a functional selection constraint. Microchip states that MLL, FLL, and RLL use different internal bonding and cannot be changed through an external pin or register setting. Do not create a footprint that accepts all three suffix variants without manufacturer approval; assign the complete ordering code and verify the MLL-specific pin table before releasing Gerber files or approving a substitute.

Separate the MII interface from noisy power stages and preserve the manufacturer's recommended clock topology and impedance. MII timing margins can be affected by excessive loading, incorrect series termination, and long branch routes. Review rise-time and settling behavior with the intended host controller, and verify that power sequencing and reset release meet the device requirements before enabling management traffic.

Budget the complete Ethernet subsystem rather than the switch IC alone. Include PHY power, regulator losses, magnetics or fiber components, and controller power in the thermal design. Although the KSZ8863 family emphasizes low power consumption and advanced power management, the enclosure temperature, copper area, and load condition determine the final junction and board temperature. Confirm supply tolerance and operating-temperature limits in the manufacturer data.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was identified for the exact MPN. Confirm compliance with Microchip's current product documentation before production release.

Pencarian Berhubungan

KSZ8863MLLI-TR datasheet KSZ8863MLLI-TR datasheet pdf KSZ8863MLLI-TR pinout KSZ8863MLLI-TR specifications KSZ8863MLLI-TR equivalent KSZ8863MLLI-TR replacement KSZ8863MLLI-TR cross reference KSZ8863MLLI-TR footprint KSZ8863MLLI-TR application circuit KSZ8863MLLI-TR price KSZ8863MLLI-TR stock Microchip KSZ8863MLLI-TR KSZ8863MLLI-TR vs KSZ8863FLLI KSZ8863MLLI-TR vs KSZ8863RLLI

Komponen dan Tanda berkaitan

Microchip Technology KSZ8863MLLI-TR KSZ8863MLL KSZ8863FLLI KSZ8863RLLI managed Ethernet switch Ethernet switch Ethernet interface IC integrated PHY 10/100 Mbps Ethernet Media Independent Interface MII I2C SPI auto-negotiation IEEE 802.3u Clause 28 fiber support advanced power management 48-LQFP LQFP package family surface-mount technology industrial Ethernet embedded gateway compact managed switch
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ