LC4064C-75T48I - 64-Macrocell 7.5 ns CPLD | Lattice Semiconductor
MPN: LC4064C-75T48I ✗ Akhir HayatLC4064C-75T48I Ringkasan
A CPLD, or complex programmable logic device, is a semiconductor that combines programmable AND/OR logic structures with configuration memory. Within the product hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a small FPGA for fixed or moderately changing glue-logic designs. The ispMACH 4000C family is intended to consolidate control logic, interface adaptation, state machines, and signal routing into one reconfigurable device.
The LC4064C-75T48I provides four logic elements or blocks, 64 macrocells, and 32 I/O positions in a 48-TQFP package. Its 7.5 ns speed grade supports systems requiring predictable combinational and registered logic performance. In-system programming allows a board to be configured or updated without removing the device, while the industrial temperature rating supports factory automation, industrial control, communications, and embedded equipment.
The C-series architecture provides 64 macrocells organized into four logic blocks, enabling moderately complex control functions in a non-volatile programmable logic device. Because the LC4064C family is a legacy CPLD, new designs should also consider device availability, programmer support, and migration options. The exact I/O standard, input thresholds, output drive, input rise/fall time, and configuration architecture should be confirmed in the manufacturer datasheet before final schematic and signal-integrity review.
Typical uses include industrial interface controllers, encoder and pulse-processing logic, protocol bridging, control-plane routing, test-fixture sequencing, and embedded peripheral arbitration. The 32 available I/O pins are useful for moderate external connectivity, while the four logic blocks allow several related functions to be consolidated into a single programmable component. Its 48-TQFP package also provides a practical option for automated assembly and inspection.
A critical design task is verifying every board-level electrical assumption against the exact datasheet, including mixed-voltage I/O behavior, power-supply sequencing, and programming signals. Place decoupling capacitors close to the supply pins, route programming and configuration signals away from high-speed switching nodes, and observe all absolute maximum and recommended operating conditions. PCB migration is only valid after checking the land pattern, pin functions, and power architecture.
This page organizes lifecycle, package, electrical, application, and replacement information for engineering review. It also highlights same-footprint Lattice alternatives and their speed-grade or temperature-grade differences, helping teams evaluate whether a board can remain unchanged or requires qualification and layout review.
Pilihan pengganti yang segera untuk LC4064C-75T48I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
LC4064ZC-75T48I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LC4064C-75TN48I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LC4064B-75T48I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LC4064ZC-75TN48I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LC4064ZC-5TN48I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LC4064C-75T48C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LC4064C-75T48I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C |
| Macrocell Count | 64 macrocells |
| Logic Element or Block Count | 4 logic blocks |
| Propagation Delay | 7.5 ns |
| User Input/Output Pins | 32 I/O pins |
| Kemasan | 48-TQFP, 7 mm x 7 mm |
| Jenis Pemasangan | Surface mount |
| Programming Method | In-system programmable |
| Minimum Operating Supply Voltage | 1.65 V |
| Gambaran Suhu Operasi | -40°C to +105°C |
| Logic Technology | Programmable high-density PLD |
| Configuration Memory | Non-volatile programmable configuration |
| Component Type | IC CPLD |
Panduan Konfigurasi Pin LC4064C-75T48I 48-tqfp, 7 mm x 7 mm
Konfigurasi pin untuk LC4064C-75T48I (48-tqfp, 7 mm x 7 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LC4064C-75T48I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LC4064C-75T48I patut untuk 6 aplikasis: Industrial Control Logic, Protocol and Interface Bridging, Encoder and Pulse Processing, Test and Fixture Sequencing, Embedded Peripheral Arbitration, Communications Front-End Control.
Industrial Control Logic
The LC4064C-75T48I fits compact industrial control boards that combine state-machine logic, interlocks, signal routing, and peripheral arbitration in one programmable device. Its 64 macrocells across four logic blocks provide enough structural capacity for multiple fixed control functions, while the 7.5 ns propagation-delay grade supports deterministic combinational decisions. The -40°C to +105°C industrial rating is appropriate for factory equipment exposed to temperature variation. Place the 48-TQFP device near the controlled interfaces, keep programming traces away from switching power nodes, and validate every I/O threshold against the field-sensor and actuator levels.
Disebarkan
Protocol and Interface Bridging
The LC4064C-75T48I can implement protocol conversion, command decoding, bus arbitration, and data-routing logic when a small embedded controller lacks dedicated interface resources. Its 32 user I/O pins allow connection to multiple digital devices, while the four logic blocks divide related state machines and combinational functions into manageable sections. The 7.5 ns speed grade is useful when system timing must be checked against external bus timing rather than left to software. Validate voltage levels, setup and hold requirements, input rise and fall limits, and output drive in the manufacturer datasheet before connecting to production equipment buses.
Disebarkan
Encoder and Pulse Processing
The LC4064C-75T48I is appropriate for encoder qualification, pulse counting, direction decoding, capture logic, and synchronization in motion-control or measurement equipment. Its four logic blocks can host parallel counter, decoder, and output-control functions, while the 7.5 ns propagation delay supports short combinational paths between captured pulse signals. The 32 I/O pins are useful for quadrature, index, capture, and status connections. Place input buffering and isolation close to the connector, maintain signal return paths, and confirm whether external filtering or synchronization is required for the encoder's frequency and noise environment.
Disebarkan
Test and Fixture Sequencing
The LC4064C-75T48I can implement repeatable test sequences, fixture muxing, relay-control timing, pass/fail branching, and instrumentation routing in a production tester. The 64-macrocell capacity supports several related fixed functions, and the in-system programming interface allows configuration updates without removing the device from the fixture controller. Its 7.5 ns propagation delay helps implement deterministic selection logic around tester switches and programmable instruments. Keep programming and test I/O paths separated where possible, use controlled impedance for high-speed test points, and verify that all configuration inputs remain in valid states during power transitions.
Disebarkan
Embedded Peripheral Arbitration
The LC4064C-75T48I is useful for arbitration among memory, communications ports, status indicators, and legacy peripherals in an embedded system. Four logic blocks can implement request prioritization, mutually exclusive enables, interrupt qualification, and address decoding with a 7.5 ns propagation-delay grade. The 48-TQFP package provides a manageable surface-mount footprint, and the 32 I/O pins cover moderate bus and control connectivity. Confirm whether the design requires 3.3 V, 2.5 V, or 1.8 V interfacing, and use the manufacturer datasheet to verify powered-down behavior, output leakage, and contention limits before routing shared signals.
Disebarkan
Communications Front-End Control
The LC4064C-75T48I can handle modem-control signaling, line-interface selection, command parsing, routing, and status logic in communications equipment. Its 32 I/O pins and four logic blocks allow parallel or multiplexed control functions to be consolidated, while the 7.5 ns propagation-delay class supports short deterministic control paths. The industrial temperature range supports equipment deployed outside controlled room environments. Keep sensitive communications traces away from programming and switching nodes, use the pin table to identify dedicated configuration functions, and confirm that every external driver remains within the device's absolute maximum and recommended operating limits.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LC4064C-75T48I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LC4064ZC-75T48I | LC4064C-75TN48I | LC4064B-75T48I | LC4064ZC-75TN48I | LC4064ZC-5TN48I | LC4064C-75T48C |
|---|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) |
| Device Family | ispMACH 4000C | ispMACH 4000Z | ispMACH 4000C | ispMACH 4000B | ispMACH 4000Z | ispMACH 4000Z | ispMACH 4000C |
| Performance Level | 7.5 ns propagation-delay grade | 168 MHz listed performance | 7.5 ns speed grade | 7.5 ns ordering speed grade | 168 MHz listed performance | 5 ns ordering designation | 7.5 ns speed grade |
| Temperature Grade | Industrial, -40°C to +105°C | Industrial suffix I | Industrial suffix I | Industrial suffix I | Industrial suffix I | Industrial suffix I | Commercial suffix C |
Penyeberangsung Jelas
- Matches the original industrial C-series timing grade (vsLC4064C-75T48C)
- Preserves the original ispMACH 4000C family architecture (vsLC4064B-75T48I)
- Uses the established 7.5 ns ordering designation (vsLC4064ZC-5TN48I)
- Retains the industrial-temperature suffix (vsLC4064ZC-75TN48I)
Catatan Desain
Treat the 48-TQFP land pattern as a migration opportunity, not automatic compatibility. Before replacing LC4064C-75T48I with any alternative, compare power pins, configuration pins, user I/O positions, exposed pad or thermal-pad requirements, and the manufacturer land-pattern drawing. Route programming signals away from switching inductors and high-current return paths, and provide local supply decoupling at the device pins. A footprint match alone does not protect against timing, voltage, or configuration incompatibility.
Review all external interfaces against the manufacturer’s input thresholds, output drive, input rise and fall time, and capacitive-load limits. The 7.5 ns propagation-delay grade does not by itself guarantee a safe external interface: board capacitance, connector length, source impedance, and simultaneous switching can still create overshoot or ringing. Use short traces, controlled return paths, suitable termination, and series damping where rise and fall times are too fast for the connected load.
Do not substitute a commercial-temperature LC4064C-75T48C for the industrial LC4064C-75T48I in equipment whose ambient temperature can exceed the commercial range. Conversely, do not assume the LC4064ZC parts are interchangeable merely because they have a 48-TQFP package and 64 macrocells. Confirm device family, supply voltage, timing table, configuration protocol, and programmer support. For maintenance programs, qualify each proposed alternate as a separate controlled part number.
Separate configuration and user-I/O routing where possible, especially on boards containing clocked or switching peripherals. Keep the device’s supply return compact, place bypassing capacitors according to the datasheet layout guidance, and avoid routing sensitive inputs beneath the package unless the multilayer stack-up and reference plane are controlled. Document test access for configuration pins so board diagnostics can distinguish a logic failure from a configuration or programming-interface failure.
Maklumat Kesediaan
The manufacturer lifecycle information identifies LC4064C as discontinued. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact manufacturing lot and condition.