LC4064C-75T48I - 64-Macrocell 7.5 ns CPLD | Lattice Semiconductor
MPN: LC4064C-75T48I ✗ 停產LC4064C-75T48I 概覽
A CPLD, or complex programmable logic device, is a semiconductor that combines programmable AND/OR logic structures with configuration memory. Within the product hierarchy, a CPLD is a programmable logic device, a digital semiconductor, and an alternative to a small FPGA for fixed or moderately changing glue-logic designs. The ispMACH 4000C family is intended to consolidate control logic, interface adaptation, state machines, and signal routing into one reconfigurable device.
The LC4064C-75T48I provides four logic elements or blocks, 64 macrocells, and 32 I/O positions in a 48-TQFP package. Its 7.5 ns speed grade supports systems requiring predictable combinational and registered logic performance. In-system programming allows a board to be configured or updated without removing the device, while the industrial temperature rating supports factory automation, industrial control, communications, and embedded equipment.
The C-series architecture provides 64 macrocells organized into four logic blocks, enabling moderately complex control functions in a non-volatile programmable logic device. Because the LC4064C family is a legacy CPLD, new designs should also consider device availability, programmer support, and migration options. The exact I/O standard, input thresholds, output drive, input rise/fall time, and configuration architecture should be confirmed in the manufacturer datasheet before final schematic and signal-integrity review.
Typical uses include industrial interface controllers, encoder and pulse-processing logic, protocol bridging, control-plane routing, test-fixture sequencing, and embedded peripheral arbitration. The 32 available I/O pins are useful for moderate external connectivity, while the four logic blocks allow several related functions to be consolidated into a single programmable component. Its 48-TQFP package also provides a practical option for automated assembly and inspection.
A critical design task is verifying every board-level electrical assumption against the exact datasheet, including mixed-voltage I/O behavior, power-supply sequencing, and programming signals. Place decoupling capacitors close to the supply pins, route programming and configuration signals away from high-speed switching nodes, and observe all absolute maximum and recommended operating conditions. PCB migration is only valid after checking the land pattern, pin functions, and power architecture.
This page organizes lifecycle, package, electrical, application, and replacement information for engineering review. It also highlights same-footprint Lattice alternatives and their speed-grade or temperature-grade differences, helping teams evaluate whether a board can remain unchanged or requires qualification and layout review.
直接替換替代品,適用於 LC4064C-75T48I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
LC4064ZC-75T48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064C-75TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064B-75T48I
✅ 直接替換聯絡詢價
查看資料表 →LC4064ZC-75TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064ZC-5TN48I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4064C-75T48C
✅ 直接替換聯絡詢價
查看資料表 →LC4064C-75T48I 最大額定值與電氣特性
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000C |
| Macrocell Count | 64 macrocells |
| Logic Element or Block Count | 4 logic blocks |
| Propagation Delay | 7.5 ns |
| User Input/Output Pins | 32 I/O pins |
| 封裝 | 48-TQFP, 7 mm x 7 mm |
| 安裝類型 | Surface mount |
| Programming Method | In-system programmable |
| Minimum Operating Supply Voltage | 1.65 V |
| 工作溫度範圍 | -40°C to +105°C |
| Logic Technology | Programmable high-density PLD |
| Configuration Memory | Non-volatile programmable configuration |
| Component Type | IC CPLD |
LC4064C-75T48I 48-tqfp, 7 mm x 7 mm 腳位配置指南
LC4064C-75T48I(48-tqfp, 7 mm x 7 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4064C-75T48I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4064C-75T48I 適用於 6 應用s: Industrial Control Logic, Protocol and Interface Bridging, Encoder and Pulse Processing, Test and Fixture Sequencing, Embedded Peripheral Arbitration, Communications Front-End Control.
Industrial Control Logic
The LC4064C-75T48I fits compact industrial control boards that combine state-machine logic, interlocks, signal routing, and peripheral arbitration in one programmable device. Its 64 macrocells across four logic blocks provide enough structural capacity for multiple fixed control functions, while the 7.5 ns propagation-delay grade supports deterministic combinational decisions. The -40°C to +105°C industrial rating is appropriate for factory equipment exposed to temperature variation. Place the 48-TQFP device near the controlled interfaces, keep programming traces away from switching power nodes, and validate every I/O threshold against the field-sensor and actuator levels.
推薦
Protocol and Interface Bridging
The LC4064C-75T48I can implement protocol conversion, command decoding, bus arbitration, and data-routing logic when a small embedded controller lacks dedicated interface resources. Its 32 user I/O pins allow connection to multiple digital devices, while the four logic blocks divide related state machines and combinational functions into manageable sections. The 7.5 ns speed grade is useful when system timing must be checked against external bus timing rather than left to software. Validate voltage levels, setup and hold requirements, input rise and fall limits, and output drive in the manufacturer datasheet before connecting to production equipment buses.
推薦
Encoder and Pulse Processing
The LC4064C-75T48I is appropriate for encoder qualification, pulse counting, direction decoding, capture logic, and synchronization in motion-control or measurement equipment. Its four logic blocks can host parallel counter, decoder, and output-control functions, while the 7.5 ns propagation delay supports short combinational paths between captured pulse signals. The 32 I/O pins are useful for quadrature, index, capture, and status connections. Place input buffering and isolation close to the connector, maintain signal return paths, and confirm whether external filtering or synchronization is required for the encoder's frequency and noise environment.
推薦
Test and Fixture Sequencing
The LC4064C-75T48I can implement repeatable test sequences, fixture muxing, relay-control timing, pass/fail branching, and instrumentation routing in a production tester. The 64-macrocell capacity supports several related fixed functions, and the in-system programming interface allows configuration updates without removing the device from the fixture controller. Its 7.5 ns propagation delay helps implement deterministic selection logic around tester switches and programmable instruments. Keep programming and test I/O paths separated where possible, use controlled impedance for high-speed test points, and verify that all configuration inputs remain in valid states during power transitions.
推薦
Embedded Peripheral Arbitration
The LC4064C-75T48I is useful for arbitration among memory, communications ports, status indicators, and legacy peripherals in an embedded system. Four logic blocks can implement request prioritization, mutually exclusive enables, interrupt qualification, and address decoding with a 7.5 ns propagation-delay grade. The 48-TQFP package provides a manageable surface-mount footprint, and the 32 I/O pins cover moderate bus and control connectivity. Confirm whether the design requires 3.3 V, 2.5 V, or 1.8 V interfacing, and use the manufacturer datasheet to verify powered-down behavior, output leakage, and contention limits before routing shared signals.
推薦
Communications Front-End Control
The LC4064C-75T48I can handle modem-control signaling, line-interface selection, command parsing, routing, and status logic in communications equipment. Its 32 I/O pins and four logic blocks allow parallel or multiplexed control functions to be consolidated, while the 7.5 ns propagation-delay class supports short deterministic control paths. The industrial temperature range supports equipment deployed outside controlled room environments. Keep sensitive communications traces away from programming and switching nodes, use the pin table to identify dedicated configuration functions, and confirm that every external driver remains within the device's absolute maximum and recommended operating limits.
推薦
推薦產品摘要
工程參考資料,適用於 LC4064C-75T48I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4064ZC-75T48I | LC4064C-75TN48I | LC4064B-75T48I | LC4064ZC-75TN48I | LC4064ZC-5TN48I | LC4064C-75T48C |
|---|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) | 48-TQFP (7 mm x 7 mm) |
| Device Family | ispMACH 4000C | ispMACH 4000Z | ispMACH 4000C | ispMACH 4000B | ispMACH 4000Z | ispMACH 4000Z | ispMACH 4000C |
| Performance Level | 7.5 ns propagation-delay grade | 168 MHz listed performance | 7.5 ns speed grade | 7.5 ns ordering speed grade | 168 MHz listed performance | 5 ns ordering designation | 7.5 ns speed grade |
| Temperature Grade | Industrial, -40°C to +105°C | Industrial suffix I | Industrial suffix I | Industrial suffix I | Industrial suffix I | Industrial suffix I | Commercial suffix C |
主要差異化特點
- Matches the original industrial C-series timing grade (對比LC4064C-75T48C)
- Preserves the original ispMACH 4000C family architecture (對比LC4064B-75T48I)
- Uses the established 7.5 ns ordering designation (對比LC4064ZC-5TN48I)
- Retains the industrial-temperature suffix (對比LC4064ZC-75TN48I)
設計說明
Treat the 48-TQFP land pattern as a migration opportunity, not automatic compatibility. Before replacing LC4064C-75T48I with any alternative, compare power pins, configuration pins, user I/O positions, exposed pad or thermal-pad requirements, and the manufacturer land-pattern drawing. Route programming signals away from switching inductors and high-current return paths, and provide local supply decoupling at the device pins. A footprint match alone does not protect against timing, voltage, or configuration incompatibility.
Review all external interfaces against the manufacturer’s input thresholds, output drive, input rise and fall time, and capacitive-load limits. The 7.5 ns propagation-delay grade does not by itself guarantee a safe external interface: board capacitance, connector length, source impedance, and simultaneous switching can still create overshoot or ringing. Use short traces, controlled return paths, suitable termination, and series damping where rise and fall times are too fast for the connected load.
Do not substitute a commercial-temperature LC4064C-75T48C for the industrial LC4064C-75T48I in equipment whose ambient temperature can exceed the commercial range. Conversely, do not assume the LC4064ZC parts are interchangeable merely because they have a 48-TQFP package and 64 macrocells. Confirm device family, supply voltage, timing table, configuration protocol, and programmer support. For maintenance programs, qualify each proposed alternate as a separate controlled part number.
Separate configuration and user-I/O routing where possible, especially on boards containing clocked or switching peripherals. Keep the device’s supply return compact, place bypassing capacitors according to the datasheet layout guidance, and avoid routing sensitive inputs beneath the package unless the multilayer stack-up and reference plane are controlled. Document test access for configuration pins so board diagnostics can distinguish a logic failure from a configuration or programming-interface failure.
合規資訊
The manufacturer lifecycle information identifies LC4064C as discontinued. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation for the exact manufacturing lot and condition.