LC4256B-5T100I - 5ns 256-Macrocells CPLD | Lattice | Industrial
MPN: LC4256B-5T100I ✗ Akhir HayatLC4256B-5T100I Ringkasan
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that converts fixed logic descriptions into configurable combinational and sequential logic. Structurally, it belongs to the programmable-logic hierarchy alongside FPGAs and is used for glue logic, control sequencing, interface bridging, protocol adaptation, and compact state-machine implementations where predictable timing and nonvolatile configuration support are important.
The LC4256B belongs to Lattice's ispMACH 4000B family and provides 256 macrocells with a 5 ns pin-to-pin delay. Its 64 I/O pins make it suitable for designs requiring multiple parallel data paths or control outputs. In-system programmability allows the configuration to be updated through the device's programming interface without removing the component from the assembled board.
The -5 designation identifies the speed grade, while -100 identifies the 100-pin package and -I identifies the industrial temperature option. The Lattice ispMACH 4000B architecture provides a practical bridge between simple fixed-function glue logic and larger FPGAs. Its deterministic macrocell structure and dedicated I/O resources are useful when a design needs straightforward logic density without the routing complexity of a large FPGA.
Typical uses include industrial control and data-acquisition systems, communications-interface conditioning, test and measurement equipment, embedded peripheral interconnection, and multi-rail control logic. The 64 I/O pins can support parallel bus steering, status and alarm outputs, counter decoding, and handshake logic close to the associated processor or peripheral.
Design planning should focus on signal integrity, programming-interface compatibility, and timing margins. Keep external clock, configuration, and high-speed routing paths short, follow the manufacturer package and power recommendations, and validate every interface against the selected I/O voltage. Because the device is discontinued, production planning should also include an explicit lifecycle assessment and a controlled sourcing strategy.
This product page combines device identity, package and timing information with practical implementation guidance, engineering application context, lifecycle considerations, and same-family drop-in alternatives. These details help designers evaluate the LC4256B-5T100I as a configurable logic element before beginning board layout, programming, and supply-chain qualification.
Pilihan pengganti yang segera untuk LC4256B-5T100I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LC4256B-5T100I (sama faktor bentuk dan kaki) — berbeza dalam Device Type.
LC4256B-4T100I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LC4256B-6T100I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LC4256B-3T100I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LC4256B-5T100C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LC4256B-5TN100I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LC4256B-5T100I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | ispMACH 4000B complex programmable logic device |
| Macrocells | 256 macrocells |
| Logic Elements | 16 logic elements |
| Pin-to-Pin Delay | 5 ns |
| User I/O Pins | 64 I/O pins |
| Internal Supply Voltage | 2.3 V to 2.7 V |
| Supported Interface Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Programmability | In-system programmable |
| Kemasan | 100-pin TQFP |
| Jenis Pemasangan | Surface mount |
| Temperature Grade | Industrial grade |
| Device Series | ispMACH 4000B series |
| Product Status | Discontinued |
Panduan Konfigurasi Pin LC4256B-5T100I 100-pin tqfp
Konfigurasi pin untuk LC4256B-5T100I (100-pin tqfp pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LC4256B-5T100I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LC4256B-5T100I patut untuk 6 aplikasis: Industrial Control and Automation, Data Acquisition Interface Conditioning, Communications Interface Bridging, Test and Measurement Equipment, Embedded Peripheral Interconnection, Programmable Timing and Sequencer.
Industrial Control and Automation
The LC4256B-5T100I fits compact industrial control logic where numerous deterministic I/O points must be combined with a relatively fast programmable-logic core. Its 64 user I/O pins can handle limit-switch inputs, actuator commands, interlocks, status indicators, and encoder or bus handshakes, while the 5 ns pin-to-pin delay supports short combinational decision paths. The industrial suffix is intended for use across the manufacturer's specified industrial temperature range. Designers should assign inputs and outputs by voltage domain, apply the manufacturer's recommended decoupling, and validate timing against the worst-case operating temperature. In-system programmability is particularly useful for production configuration, diagnostics, and field updates because the logic can be revised without replacing the device.
Disebarkan
Data Acquisition Interface Conditioning
The LC4256B-5T100I can provide programmable timing and interface logic between acquisition circuits, processors, and external converters. With 256 macrocells and 64 I/O pins, it can implement capture sequencing, trigger qualification, channel selection, data-valid generation, and test-point multiplexing without changing the PCB when a new acquisition protocol is introduced. The 5 ns timing grade allows short paths for synchronizing control outputs with slower peripherals, although external device timing must still be included in the system budget. Engineers should define setup and hold requirements, use registered outputs for multi-cycle paths, and isolate analog and digital routing. The in-system-programmable architecture also supports configuration changes during diagnostics or calibration cycles.
Disebarkan
Communications Interface Bridging
The LC4256B-5T100I is suitable for protocol adaptation and communications glue logic when a system must translate or qualify signals among processors, transceivers, and test equipment. Its 64 I/O pins can support parallel data buses, command strobes, interrupt lines, flow-control signals, and programmable polarity or delay elements. The 5 ns pin-to-pin delay provides useful margin for short combinational interfaces, but protocol timing must be checked against the slowest participating device. Because the CPLD is in-system programmable, a bridge can be revised for a new baud rate, framing format, or test mode without a board respin. Layout should use short series termination paths where appropriate and separate clock, data, and noisy transceiver supply returns.
Disebarkan
Test and Measurement Equipment
The LC4256B-5T100I can implement sequencing, pattern generation, timing qualification, and instrument-control logic in compact test systems. The 256-macrocell capacity supports parallel state machines, while the 64 I/O pins provide sufficient connections for limit comparison, relay sequencing, status encoding, and synchronization with test fixtures. Its 5 ns pin-to-pin delay is useful in short trigger and strobe paths, while in-system programmability allows different test sequences to be loaded for production or service. Designers should use registered outputs for signals crossing multiple clock domains, preserve margin for probe loading, and avoid relying on unspecified internal timing. Configuration retention and write protection should also be considered so test patterns cannot be unintentionally overwritten.
Disebarkan
Embedded Peripheral Interconnection
The LC4256B-5T100I can act as a configurable interface hub between a host processor and multiple peripheral devices. Typical logic includes chip-select generation, bus arbitration, interrupt combining, level translation, protocol conversion, and peripheral reset sequencing. With 64 I/O pins, the device can support several parallel interfaces without forcing the host to manage every handshake directly. The 5 ns delay supports short control paths, but address decoding and multi-cycle transfers should use registered logic to avoid combinational hazards. Engineers should review the datasheet's I/O and power requirements, ensure unused inputs have defined levels, and keep configuration signals inaccessible to ordinary system buses. The industrial grade is advantageous when the peripheral subsystem operates in an enclosure with variable ambient temperature.
Disebarkan
Programmable Timing and Sequencer
The LC4256B-5T100I can implement deterministic counters, event sequencers, pulse conditioners, delay lines, and multi-channel trigger distribution for embedded systems. Its 256 macrocells provide enough logic for parallel state machines, while 64 I/O pins allow multiple event inputs and synchronized outputs to share a common programmable controller. The 5 ns pin-to-pin grade helps minimize combinational delay in trigger paths, though clock-domain crossings and external propagation delays remain part of the complete timing analysis. Registered outputs, synchronization stages, and reset strategies should be established during architecture review. In-system programmability makes it practical to adapt the sequence after bench validation without changing the board, while the industrial suffix supports operation in equipment with uncontrolled enclosure temperatures.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LC4256B-5T100I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LC4256B-4T100I | LC4256B-6T100I | LC4256B-3T100I | LC4256B-5T100C | LC4256B-5TN100I |
|---|---|---|---|---|---|---|
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | LC4256B |
| Pin-to-Pin Delay | 5 ns | 4 ns | 6 ns | 3 ns | 5 ns | 5 ns |
| Temperature Grade | Industrial grade | Industrial grade | Industrial grade | Industrial grade | Commercial grade | Industrial grade |
Penyeberangsung Jelas
- Industrial temperature designation (vsLC4256B-5T100C)
- Higher timing performance than the slow speed-grade alternative (vsLC4256B-6T100I)
- Lower timing delay than the fast speed-grade alternative (vsLC4256B-4T100I)
Catatan Desain
Assign PCB nets directly from the manufacturer datasheet pin table and preserve the 100-pin TQFP footprint exactly. Keep configuration signals, clock inputs, and reset paths away from high-current switching nodes. For a 5 ns device, route short combinational paths directly and use registered logic for multi-cycle signals. Inspect the assembled board for programming-access clearance, test-point space, and compatible component height before releasing the mechanical drawing.
Decouple each supply connection according to the manufacturer recommendations and keep the return path from the bypass capacitors to the device ground pins as short as practical. Estimate internal consumption as P_D = V_CC × I_CC and include external I/O loading before selecting a regulator. Because this is a discontinued industrial part, also validate power-up, reset, and configuration behavior across the complete temperature range rather than relying only on nominal bench conditions.
Do not treat the -5, -100, and -I suffixes as interchangeable: they identify speed grade, package, and temperature class. A board designed for the industrial -I device should not silently accept the commercial -C version without checking the required ambient range. Likewise, the -4 and -6 speed grades alter timing characteristics even though they use the same package. Verify programming-file compatibility, pin functions, and timing constraints before approving a substitute.
Maklumat Kesediaan
The device is identified as industrial grade and discontinued, but no target-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 qualification is not indicated.