LC4256B-5T100I - 5ns 256-Macrocells CPLD | Lattice | Industrial
MPN: LC4256B-5T100I ✗ 停產LC4256B-5T100I 概覽
A CPLD, or complex programmable logic device, is a user-programmable semiconductor that converts fixed logic descriptions into configurable combinational and sequential logic. Structurally, it belongs to the programmable-logic hierarchy alongside FPGAs and is used for glue logic, control sequencing, interface bridging, protocol adaptation, and compact state-machine implementations where predictable timing and nonvolatile configuration support are important.
The LC4256B belongs to Lattice's ispMACH 4000B family and provides 256 macrocells with a 5 ns pin-to-pin delay. Its 64 I/O pins make it suitable for designs requiring multiple parallel data paths or control outputs. In-system programmability allows the configuration to be updated through the device's programming interface without removing the component from the assembled board.
The -5 designation identifies the speed grade, while -100 identifies the 100-pin package and -I identifies the industrial temperature option. The Lattice ispMACH 4000B architecture provides a practical bridge between simple fixed-function glue logic and larger FPGAs. Its deterministic macrocell structure and dedicated I/O resources are useful when a design needs straightforward logic density without the routing complexity of a large FPGA.
Typical uses include industrial control and data-acquisition systems, communications-interface conditioning, test and measurement equipment, embedded peripheral interconnection, and multi-rail control logic. The 64 I/O pins can support parallel bus steering, status and alarm outputs, counter decoding, and handshake logic close to the associated processor or peripheral.
Design planning should focus on signal integrity, programming-interface compatibility, and timing margins. Keep external clock, configuration, and high-speed routing paths short, follow the manufacturer package and power recommendations, and validate every interface against the selected I/O voltage. Because the device is discontinued, production planning should also include an explicit lifecycle assessment and a controlled sourcing strategy.
This product page combines device identity, package and timing information with practical implementation guidance, engineering application context, lifecycle considerations, and same-family drop-in alternatives. These details help designers evaluate the LC4256B-5T100I as a configurable logic element before beginning board layout, programming, and supply-chain qualification.
直接替換替代品,適用於 LC4256B-5T100I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LC4256B-5T100I (相同外形與佔位) — 差異在於 Device Type.
LC4256B-4T100I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LC4256B-6T100I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LC4256B-3T100I
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LC4256B-5T100C
✅ 直接替換聯絡詢價
查看資料表 →LC4256B-5TN100I
✅ 直接替換📋 參考替代品(不在目錄中)
LC4256B-5T100I 最大額定值與電氣特性
| Device Type | ispMACH 4000B complex programmable logic device |
| Macrocells | 256 macrocells |
| Logic Elements | 16 logic elements |
| Pin-to-Pin Delay | 5 ns |
| User I/O Pins | 64 I/O pins |
| Internal Supply Voltage | 2.3 V to 2.7 V |
| Supported Interface Voltages | 3.3 V, 2.5 V, and 1.8 V |
| Programmability | In-system programmable |
| 封裝 | 100-pin TQFP |
| 安裝類型 | Surface mount |
| Temperature Grade | Industrial grade |
| Device Series | ispMACH 4000B series |
| Product Status | Discontinued |
LC4256B-5T100I 100-pin tqfp 腳位配置指南
LC4256B-5T100I(100-pin tqfp 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。
無詳細腳位定義資料: LC4256B-5T100I.
請參閱 資料表 以查看完整腳位配置。
典型應用
LC4256B-5T100I 適用於 6 應用s: Industrial Control and Automation, Data Acquisition Interface Conditioning, Communications Interface Bridging, Test and Measurement Equipment, Embedded Peripheral Interconnection, Programmable Timing and Sequencer.
Industrial Control and Automation
The LC4256B-5T100I fits compact industrial control logic where numerous deterministic I/O points must be combined with a relatively fast programmable-logic core. Its 64 user I/O pins can handle limit-switch inputs, actuator commands, interlocks, status indicators, and encoder or bus handshakes, while the 5 ns pin-to-pin delay supports short combinational decision paths. The industrial suffix is intended for use across the manufacturer's specified industrial temperature range. Designers should assign inputs and outputs by voltage domain, apply the manufacturer's recommended decoupling, and validate timing against the worst-case operating temperature. In-system programmability is particularly useful for production configuration, diagnostics, and field updates because the logic can be revised without replacing the device.
推薦
Data Acquisition Interface Conditioning
The LC4256B-5T100I can provide programmable timing and interface logic between acquisition circuits, processors, and external converters. With 256 macrocells and 64 I/O pins, it can implement capture sequencing, trigger qualification, channel selection, data-valid generation, and test-point multiplexing without changing the PCB when a new acquisition protocol is introduced. The 5 ns timing grade allows short paths for synchronizing control outputs with slower peripherals, although external device timing must still be included in the system budget. Engineers should define setup and hold requirements, use registered outputs for multi-cycle paths, and isolate analog and digital routing. The in-system-programmable architecture also supports configuration changes during diagnostics or calibration cycles.
推薦
Communications Interface Bridging
The LC4256B-5T100I is suitable for protocol adaptation and communications glue logic when a system must translate or qualify signals among processors, transceivers, and test equipment. Its 64 I/O pins can support parallel data buses, command strobes, interrupt lines, flow-control signals, and programmable polarity or delay elements. The 5 ns pin-to-pin delay provides useful margin for short combinational interfaces, but protocol timing must be checked against the slowest participating device. Because the CPLD is in-system programmable, a bridge can be revised for a new baud rate, framing format, or test mode without a board respin. Layout should use short series termination paths where appropriate and separate clock, data, and noisy transceiver supply returns.
推薦
Test and Measurement Equipment
The LC4256B-5T100I can implement sequencing, pattern generation, timing qualification, and instrument-control logic in compact test systems. The 256-macrocell capacity supports parallel state machines, while the 64 I/O pins provide sufficient connections for limit comparison, relay sequencing, status encoding, and synchronization with test fixtures. Its 5 ns pin-to-pin delay is useful in short trigger and strobe paths, while in-system programmability allows different test sequences to be loaded for production or service. Designers should use registered outputs for signals crossing multiple clock domains, preserve margin for probe loading, and avoid relying on unspecified internal timing. Configuration retention and write protection should also be considered so test patterns cannot be unintentionally overwritten.
推薦
Embedded Peripheral Interconnection
The LC4256B-5T100I can act as a configurable interface hub between a host processor and multiple peripheral devices. Typical logic includes chip-select generation, bus arbitration, interrupt combining, level translation, protocol conversion, and peripheral reset sequencing. With 64 I/O pins, the device can support several parallel interfaces without forcing the host to manage every handshake directly. The 5 ns delay supports short control paths, but address decoding and multi-cycle transfers should use registered logic to avoid combinational hazards. Engineers should review the datasheet's I/O and power requirements, ensure unused inputs have defined levels, and keep configuration signals inaccessible to ordinary system buses. The industrial grade is advantageous when the peripheral subsystem operates in an enclosure with variable ambient temperature.
推薦
Programmable Timing and Sequencer
The LC4256B-5T100I can implement deterministic counters, event sequencers, pulse conditioners, delay lines, and multi-channel trigger distribution for embedded systems. Its 256 macrocells provide enough logic for parallel state machines, while 64 I/O pins allow multiple event inputs and synchronized outputs to share a common programmable controller. The 5 ns pin-to-pin grade helps minimize combinational delay in trigger paths, though clock-domain crossings and external propagation delays remain part of the complete timing analysis. Registered outputs, synchronization stages, and reset strategies should be established during architecture review. In-system programmability makes it practical to adapt the sequence after bench validation without changing the board, while the industrial suffix supports operation in equipment with uncontrolled enclosure temperatures.
推薦
推薦產品摘要
工程參考資料,適用於 LC4256B-5T100I — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LC4256B-4T100I | LC4256B-6T100I | LC4256B-3T100I | LC4256B-5T100C | LC4256B-5TN100I |
|---|---|---|---|---|---|---|
| Package | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 | TQFP-100 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Family | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | ispMACH 4000B | LC4256B |
| Pin-to-Pin Delay | 5 ns | 4 ns | 6 ns | 3 ns | 5 ns | 5 ns |
| Temperature Grade | Industrial grade | Industrial grade | Industrial grade | Industrial grade | Commercial grade | Industrial grade |
主要差異化特點
- Industrial temperature designation (對比LC4256B-5T100C)
- Higher timing performance than the slow speed-grade alternative (對比LC4256B-6T100I)
- Lower timing delay than the fast speed-grade alternative (對比LC4256B-4T100I)
設計說明
Assign PCB nets directly from the manufacturer datasheet pin table and preserve the 100-pin TQFP footprint exactly. Keep configuration signals, clock inputs, and reset paths away from high-current switching nodes. For a 5 ns device, route short combinational paths directly and use registered logic for multi-cycle signals. Inspect the assembled board for programming-access clearance, test-point space, and compatible component height before releasing the mechanical drawing.
Decouple each supply connection according to the manufacturer recommendations and keep the return path from the bypass capacitors to the device ground pins as short as practical. Estimate internal consumption as P_D = V_CC × I_CC and include external I/O loading before selecting a regulator. Because this is a discontinued industrial part, also validate power-up, reset, and configuration behavior across the complete temperature range rather than relying only on nominal bench conditions.
Do not treat the -5, -100, and -I suffixes as interchangeable: they identify speed grade, package, and temperature class. A board designed for the industrial -I device should not silently accept the commercial -C version without checking the required ambient range. Likewise, the -4 and -6 speed grades alter timing characteristics even though they use the same package. Verify programming-file compatibility, pin functions, and timing constraints before approving a substitute.
合規資訊
The device is identified as industrial grade and discontinued, but no target-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was identified. AEC-Q100 qualification is not indicated.