LFE2-6SE-6T144I - 6K LUT ECP2 FPGA | Lattice Semiconductor
MPN: LFE2-6SE-6T144I ✓ AktifLFE2-6SE-6T144I Ringkasan
An FPGA is a semiconductor whose internal logic, interconnects, and peripheral blocks are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device, a complement to the ASIC category, and a reconfigurable implementation of digital logic. ECP2 devices provide a practical platform for control logic, interface bridging, signal conditioning, embedded protocol handling, and modest parallel-processing tasks where software-only execution would be less deterministic or less flexible.
The LFE2-6SE-6T144I combines 6,000 LUTs with 90 user I/O in its 144-LQFP configuration. Its S-Series designation identifies the ECP2 feature family with DSP-oriented capabilities, while the -6 suffix identifies the device speed grade. The 1.2 V core supply supports low-voltage digital implementation, and the 144-LQFP package exposes more I/O than smaller FPGA packages while remaining compatible with standard surface-mount assembly methods.
Compared with an application-specific integrated circuit, this FPGA permits design changes to be implemented through programmable logic rather than a new silicon fabrication run. That flexibility is useful for product variants, field upgrades, and prototypes. Compared with a microcontroller, the FPGA can execute multiple finite-state-machine, filtering, serial-bridge, or data-formatting operations in parallel, provided the design fits its 6,000-LUT resource budget.
Typical uses include industrial control modules, serial protocol bridges, instrumentation signal paths, embedded video-control functions, communication front ends, and general-purpose digital logic. Selection should begin with the required number and type of I/O, estimated LUT and routing demand, supported serial interfaces, clocking plan, and operating environment. Engineers should also verify configuration memory requirements and pin assignments in the Lattice device documentation before layout release.
A critical design consideration is complete pin and power planning. Place all decoupling capacitors next to the appropriate supply pins, route configuration and serial signals away from sensitive analog paths, and verify every external pin connection against the package-specific pin table. The 144-LQFP footprint is mechanically standardized, but footprint similarity alone does not guarantee that another ECP2 device has equivalent logic resources, serial interfaces, or configuration behavior.
This product record combines distributor specifications, package identification, comparison parameters, and practical implementation guidance. It helps engineers identify whether the LFE2-6SE-6T144I matches an ECP2 design requirement and provides a disciplined basis for evaluating same-family drop-in candidates before schematic capture and PCB layout begin.
Pilihan pengganti yang segera untuk LFE2-6SE-6T144I — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LFE2-6SE-6T144I (sama faktor bentuk dan kaki) — berbeza dalam Device Type, DSP Capability, Package, Speed Grade, Package Body Size.
LFE2-6SE-6TN144I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LFE2-6E-6T144I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LFE2-6E-6TN144I
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LFE2-6SE-5TN144I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LFE2-6E-5TN144C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LFE2-6SE-6T144I Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | ECP2 Field Programmable Gate Array (FPGA) |
| Logic Cells | 6,000 cells |
| Look-Up Tables | 6K LUTs |
| User I/O | 90 I/O |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -6 |
| Temperature Grade Code | I |
| DSP Capability | S-Series DSP |
| Kemasan | 144-LQFP |
| Package Pin Count | 144 pins |
| Package Body Size | 20 x 20 mm |
| Gaya Pemasangan | Surface Mount |
| Lead-Free Status | Lead-free package |
Panduan Konfigurasi Pin LFE2-6SE-6T144I 20 x 20 mm
Konfigurasi pin untuk LFE2-6SE-6T144I (20 x 20 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LFE2-6SE-6T144I.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LFE2-6SE-6T144I patut untuk 6 aplikasis: Industrial Control and Automation, Serial Protocol Bridging, Instrumentation Signal Conditioning, Communication Front-End, Embedded Video Control, Programmable Logic Consolidation.
Industrial Control and Automation
The LFE2-6SE-6T144I fits compact industrial-control logic where a controller must coordinate sensors, actuators, interlocks, and communication interfaces. Its 6,000 logic cells provide parallel resources for state machines, timing blocks, and protocol translation, while 90 user I/O allow direct connection to discrete inputs and outputs. The S-Series DSP features can assist with sampled signal conditioning, and the -6 grade supports performance-oriented control designs. Before committing to the device, verify the grade-I temperature limits, external interface standards, isolation requirements, and worst-case LUT utilization.
Disebarkan
Serial Protocol Bridging
The LFE2-6SE-6T144I can bridge incompatible serial streams by running each interface endpoint in parallel with independent state machines and data alignment logic. Its 6K LUT capacity is suitable for moderate protocol-conversion workloads, while 90 I/O provide ample connections for multiple data buses, control signals, and clock domains. The S-Series designation can support DSP-assisted filtering where the selected serial waveform includes sampled data. Firmware and pin planning must preserve the clock, configuration, and serial-interface requirements listed in the ECP2 documentation.
Disebarkan
Instrumentation Signal Conditioning
The LFE2-6SE-6T144I is appropriate for programmable front-end logic that must condition multiple digital sensor streams before passing them to a processor. Its 90 user I/O can accommodate parallel sensor channels, trigger lines, status signals, and communication interfaces, while the 6K LUT budget supports filters, calibration tables, and control state machines. The S-Series DSP capability offers a path to modest fixed-point processing tasks. Confirm the exact DSP block count, maximum frequency, supported I/O standards, and timing closure before assigning the device to a precision measurement path.
Disebarkan
Communication Front-End
The LFE2-6SE-6T144I can implement a programmable communication front end when a design requires deterministic parallel processing, multiple clock-related interfaces, or logic not conveniently handled by a microcontroller. The 6K LUT device supports concurrent framing, filtering, buffering, and supervisory functions, while its 90 user I/O allow direct interface to transceivers and support logic. S-Series DSP features may assist waveform manipulation where applicable. The system designer must verify serial-interface availability, clocking limits, configuration architecture, and board-level signal integrity before using it as the front-end controller.
Disebarkan
Embedded Video Control
The LFE2-6SE-6T144I is suitable for auxiliary video-control functions such as timing generation, synchronization, format coordination, and interface control rather than primary image processing. The 6K LUT capacity and 90 I/O allow several control paths to operate in parallel, while S-Series DSP features may support selected signal operations. Because the device is not characterized here as a high-resolution video processor, designers should validate bandwidth, external memory interface requirements, clock domains, and timing margins. The 144-LQFP package also provides enough pins for parallel control and data-routing functions.
Disebarkan
Programmable Logic Consolidation
The LFE2-6SE-6T144I can consolidate several small CPLD-like tasks into one programmable device when the combined design fits 6,000 logic cells. Engineers can implement timers, counters, glue logic, bus arbitration, lookup functions, and interface adapters in one 144-LQFP component, reducing board partitioning compared with several small programmable devices. The 90 I/O count supports broader connections than compact FPGA packages. Consolidation should be based on post-route resource estimates rather than LUT count alone, with attention to routing, clock domains, embedded memory, configuration space, and thermal behavior.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LFE2-6SE-6T144I — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LFE2-6SE-6TN144I | LFE2-6E-6T144I | LFE2-6E-6TN144I | LFE2-6SE-5TN144I | LFE2-6E-5TN144C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP | 144-LQFP |
| Speed Grade | -6 | -6 | -6 | -6 | -5 | -5 |
| FPGA Family | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 |
| DSP Feature | S-Series DSP | S-Series DSP | Standard ECP2 configuration | Standard ECP2 configuration | DSP | DSP |
Penyeberangsung Jelas
- Retains the -6 performance grade (vsLFE2-6SE-5TN144I)
- Includes the S-Series DSP feature designation (vsLFE2-6E-6T144I)
- Combines 6K LUTs with 90 user I/O (vsLFE2-6E-5TN144C)
- Uses a larger LQFP package for parallel connectivity (vsLFE2-6SE-5TN144I)
Catatan Desain
Build the power tree from the ECP2 device documentation rather than from package pin labels alone. Separate the 1.2 V core supply from other required supply domains, place local decoupling capacitors at the associated package pins, and provide adequate bulk capacitance near the regulator. Validate startup current, configuration-current behavior, and power-source impedance with worst-case FPGA state and I/O activity included.
Use the package-specific 144-LQFP land pattern and verify it against the current manufacturer drawing before release. Route configuration pins and clock inputs away from high-current switching nodes, provide unobstructed access for programming or configuration, and check pin assignments in the design tool against the package-specific pinout. A correct schematic symbol is insufficient if the physical package orientation or exposed supply requirements differ.
Do not select a candidate solely because it uses a 144-pin package. Confirm that the LUT count, S-Series DSP resources, serial interfaces, embedded memories, speed grade, temperature grade, and configuration method are equivalent. A lower -5 speed device requires timing closure at the lower grade, while a standard -6 E device may remove DSP resources needed by the original design.
Plan clock distribution and high-speed serial routing before assigning the remaining I/O. Keep clocks short, use matched topology where the interface standard requires it, provide series damping according to the edge-rate analysis, and keep configuration or debug activity from disturbing sensitive inputs. Validate timing with realistic routing and I/O loading rather than only block-level synthesis estimates.
Maklumat Kesediaan
The product listing identifies a lead-free package. RoHS, REACH, halogen-free, and conflict-minerals status were not stated in the product information and require confirmation from Lattice Semiconductor. AEC-Q100 is not applicable because this is an FPGA rather than an automotive-qualified device.