LFE2-6SE-5T144C - 6K LUT ECP2 FPGA | Lattice Semiconductor
MPN: LFE2-6SE-5T144C ✓ AktifLFE2-6SE-5T144C Ringkasan
An FPGA is a reconfigurable semiconductor whose logic, routing, and digital signal-processing resources can be programmed after manufacture. In the product hierarchy, the LFE2-6SE-5T144C is a programmable logic device, an FPGA, and specifically a member of the Lattice ECP2 family. Unlike a fixed-function application-specific integrated circuit, an FPGA allows parallel interface logic, control sequences, and DSP operations to be consolidated into one device while retaining field-updatable configurations.
The ECP2 architecture provides 6K LUTs, 90 I/O, and S-Series DSP resources in the 144-LQFP configuration. The 1.2 V operating voltage identifies the device as a modern FPGA intended for integration with contemporary digital logic, while the -5 designation denotes the listed speed grade. The 144-pin LQFP package provides substantially more I/O than a small FPGA package and is practical for parallel buses, memory interfaces, control logic, and external data acquisition functions.
Technical selection must account for both architecture and board constraints. ECP2 devices share a programmable platform, but ordering suffixes can distinguish speed grade, temperature grade, and package-related ordering options. Because FPGA configuration determines the implemented logic, designers should verify the exact device pinout, configuration interface, supported I/O standards, clocking resources, and power requirements in the LatticeECP2/M Family Data Sheet before committing the PCB footprint.
Typical uses include industrial control modules, sensor and measurement interfaces, communication protocol bridges, audio or control DSP, and general-purpose embedded logic. The 90-I/O count is especially useful when several buses or discrete digital interfaces must be consolidated. The S-Series DSP resources can accelerate multiply-accumulate-oriented operations, although final throughput depends on the selected clock, routing, and logic architecture.
PCB implementation requires careful attention to the 144-LQFP footprint, 1.2 V supply quality, decoupling, configuration access, and I/O assignment. Place bypass capacitors close to the supply pins, preserve a continuous return path, and follow the manufacturer's pin and layout guidance for the selected ECP2 package. Designers should also account for unused pins and configuration behavior in their board-level validation.
This page organizes the published Lattice ECP2 specifications, same-package ordering alternatives, application guidance, and practical implementation notes. It supports design triage for the LFE2-6SE-5T144C by connecting resource counts, package capacity, speed-grade differences, and replacement constraints while directing final electrical and pin-level decisions to the manufacturer documentation.
Pilihan pengganti yang segera untuk LFE2-6SE-5T144C — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LFE2-6SE-5T144C (sama faktor bentuk dan kaki) — berbeza dalam Package, Speed Grade, Core Supply Voltage, DSP Capability, Device Type.
LFE2-6SE-6T144C
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LFE2-6SE-6TN144C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif rujukan (tidak dalam katalog)
LFE2-6SE-6T144I
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LFE2-6SE-6TN144I
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LFE2-6SE-7T144C
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LFE2-6SE-7TN144C
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LFE2-6SE-5T144C Penilaian maksimum & Ciri-ciri Elektrik
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Cell Count | 6,000 cells |
| Look-Up Table Count | 6K LUTs |
| User I/O Count | 90 I/O |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -5 |
| DSP Capability | S-Series DSP |
| Kemasan | 144-LQFP |
| Package Pin Count | 144 pins |
| Package Body Size | 20 mm x 20 mm |
| Package Pitch | 0.5 mm |
| Jenis Pemasangan | Surface mount |
| Configuration Memory | 8.4 kB |
Panduan Konfigurasi Pin LFE2-6SE-5T144C 0.5 mm
Konfigurasi pin untuk LFE2-6SE-5T144C (0.5 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LFE2-6SE-5T144C.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LFE2-6SE-5T144C patut untuk 6 aplikasis: Industrial Control and Automation, Sensor and Measurement Interfaces, Communication Protocol Bridging, Embedded Audio and Control DSP, Programmable Test and Measurement, Automotive and Robust Embedded Logic.
Industrial Control and Automation
The LFE2-6SE-5T144C fits compact industrial control modules that coordinate sensors, actuators, interlocks, and machine-state logic. Its 6K LUTs provide substantial programmable logic for sequencing and protocol handling, while 90 I/O support parallel field connections without requiring a larger programmable-logic package. The 1.2 V core supports modern digital implementation, and the -5 speed grade provides additional timing margin when control logic must meet short industrial timing requirements. Engineers should partition real-time functions carefully, validate I/O standards against the field environment, and retain an external configuration path for maintenance and firmware updates.
Disebarkan
Sensor and Measurement Interfaces
The LFE2-6SE-5T144C is suitable for sensor hubs that collect parallel digital measurements, perform sampling control, and format data for an upstream processor. Its 90 user I/O offer practical connectivity for multi-channel acquisition, trigger, and control signals, while 6K LUTs support channel multiplexing, filtering, calibration state, and data packing. The S-Series DSP capability can assist arithmetic pipelines where multiply-accumulate processing is useful. Because analog front-end accuracy is not determined by the FPGA, engineers should keep sensitive analog paths separate, use the ECP2 I/O standards appropriately, and verify timing closure for the selected sampling architecture.
Disebarkan
Communication Protocol Bridging
The LFE2-6SE-5T144C can bridge parallel and serial interfaces in embedded communication equipment by combining bus logic, buffering, framing, and control in one ECP2 device. Its 90 I/O allow several legacy parallel interfaces to coexist, while 6K LUTs support state machines and protocol conversion. The S-Series DSP resources may also assist filtering or line-rate arithmetic in specialized endpoints. Implementation should use the manufacturer's supported I/O and clocking resources, constrain timing-critical paths, and verify protocol timing with representative traffic rather than relying only on functional simulation.
Disebarkan
Embedded Audio and Control DSP
The LFE2-6SE-5T144C is appropriate for audio-adjacent control and signal-processing functions that require deterministic arithmetic alongside extensive digital I/O. Its S-Series DSP capability supports multiplier-oriented operations, while 6K LUTs accommodate filters, control state, and sample-rate conversion logic. The 90-I/O count is useful for parallel codecs, control lines, clocks, and status signals. Engineers should assess whether the DSP resources meet the required sample rate and channel count, use vendor synthesis guidance for multiplier mapping, and add external memory or a companion codec when the internal resources cannot sustain the target workload.
Disebarkan
Programmable Test and Measurement
The LFE2-6SE-5T144C can implement a configurable measurement, pattern-generation, or interface-control front end in compact instrumentation. Its 6K LUTs can host acquisition control, sequencing, and data preparation, while 90 I/O provide connections to sensors, test points, and peripheral converters. The -5 speed grade can help meet timing margins in pipelined acquisition paths, although system bandwidth still depends on the selected I/O, memory interface, and clock architecture. For accurate instruments, isolate analog paths from switching logic, define deterministic acquisition timing, and validate stimulus patterns across temperature and voltage corners.
Disebarkan
Automotive and Robust Embedded Logic
The LFE2-6SE-5T144C can be evaluated for embedded logic in systems requiring a moderate number of parallel I/O and programmable control functions. The ECP2 resource set supports state machines, diagnostics, communication handling, and local signal processing, while the 144-LQFP package simplifies assembly for moderate pin counts. Automotive use must be based on the exact device's qualification and temperature documentation rather than inferred from the FPGA architecture. If the required environment exceeds the standard grade, evaluate the N or I ordering option, confirm AEC-Q100 status for the exact MPN, and complete environmental, EMC, and functional-safety analysis separately.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LFE2-6SE-5T144C — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LFE2-6SE-6T144C | LFE2-6SE-6TN144C | LFE2-6SE-6T144I | LFE2-6SE-6TN144I | LFE2-6SE-7T144C | LFE2-6SE-7TN144C |
|---|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 144-LQFP | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same | 144-LQFP - same |
| Device Family | ECP2 FPGA | ECP2 FPGA | ECP2 FPGA | ECP2 FPGA | ECP2 FPGA | ECP2 FPGA | ECP2 FPGA |
| LUT Count | 6K LUTs | 6K LUTs | 6K LUTs | 6K LUTs | 6K LUTs | 6K LUTs | 6K LUTs |
| User I/O Count | 90 I/O | 90 I/O | 90 I/O | 90 I/O | 90 I/O | 90 I/O | 90 I/O |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -5 | -6 | -6 | -6 | -6 | -7 | -7 |
| DSP Capability | S-Series DSP | S-Series DSP | S-Series DSP | S-Series DSP | S-Series DSP | S-Series DSP | S-Series DSP |
| Special Feature | Standard temperature ordering | Standard temperature ordering | N temperature-grade ordering | I temperature-grade ordering | N and I temperature-grade ordering | Standard temperature ordering | N temperature-grade ordering |
Penyeberangsung Jelas
- Higher listed speed grade than the -6 alternatives (vsLFE2-6SE-6T144C)
- Retains standard-temperature ordering at the -5 speed grade (vsLFE2-6SE-6T144I)
- Matches the resource density of the same-package ECP2 alternatives (vsLFE2-6SE-6TN144I)
- Provides more timing margin than the -7 alternative (vsLFE2-6SE-7T144C)
Catatan Desain
The ECP2 core operates from 1.2 V, so board design must provide a low-noise supply with adequate decoupling at the package. Follow the LatticeECP2/M Family Data Sheet for the required core and auxiliary supply values, permissible tolerances, ramp limits, and sequencing. Place the specified bulk and high-frequency capacitors close to their associated pins, minimize loop area, and keep return-current paths continuous. Validate startup and shutdown behavior in hardware because a usable steady-state voltage alone does not confirm correct configuration sequencing.
Use the manufacturer 144-LQFP land pattern and verify pin-1 orientation against the component drawing before releasing PCB artwork. The 144-pin package has a 0.5 mm pitch, making solder mask, pad-to-pad, and assembly-process checks important. Maintain the package's recommended courtyard, route configuration and clock signals away from noisy switching nodes, and provide accessible test points for configuration, reset, and key clock signals. A footprint audit against the exact LFE2-6SE-5T144C drawing is mandatory.
Clock quality directly affects ECP2 timing margin and DSP performance. Route clocks from the selected clock source to the appropriate dedicated clock pins using short, symmetric paths, provide uninterrupted reference planes, and keep switching outputs and high-current paths away from clock nets. Apply device-specific input thresholds and I/O standards during constraint definition. Because the -5 speed grade provides less timing slack than faster grade options, complete post-layout static timing analysis and test the design across expected voltage and temperature corners.
Do not treat an ECP2 suffix change as automatically interchangeable. The alternatives in this comparison alter speed grade, temperature grade, or both, and a faster or slower grade can change timing closure rather than only the ordering label. Before substitution, confirm the exact package drawing, pinout, core voltage, configuration method, supported I/O standards, and environmental requirements. Re-run synthesis, place-and-route, and timing analysis for the selected MPN and perform hardware validation before releasing a new production order.
Maklumat Kesediaan
The exact LFE2-6SE-5T144C product listing identifies a lead-free 144-LQFP package, but formal RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 declarations for the exact MPN are not stated. The standard-temperature ordering is not represented as AEC-Q100 qualified; confirm qualification using the exact automotive-grade ordering code and current manufacturer documentation.