Texas Instruments

LM211DRG4 - High-Speed Differential Comparator | Texas Instruments

MPN: LM211DRG4 ✓ Aktif
5 V Vdss 5.1 mA Id 8-pin SOIC (D package) Package
MOQ: 1 |

LM211DRG4 Ringkasan

Texas Instruments LM211DRG4 is a single high-speed differential comparator with strobe control, supplied in an 8-pin SOIC package. The device operates from a 5 V supply as well as positive and negative supplies up to ±15 V, and its output is compatible with common TTL and MOS logic levels. The LM211 family can also drive lamps or relays, making it suitable for threshold detection, pulse shaping, and interface conversion.

A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference between them crosses a defined threshold. It belongs to the comparator hierarchy, which includes general-purpose comparators, differential comparators, and interface ICs. Compared with a general-purpose op-amp, a comparator provides faster threshold-oriented switching and an output stage designed to connect more directly to digital logic, lamps, or relays.

The LM211 family combines single-comparator architecture with broad supply-voltage support. A 5 V implementation simplifies compatibility with TTL and MOS logic, while split or dual supplies support ±15 V industrial and analog systems. The strobe input provides a way to inhibit output transitions during selected operating intervals, and the open-collector output permits external pull-up selection and wired-interface functions. The LM211DRG4 is specified for operation from -40°C to 85°C and uses the TI D package, an 8-pin surface-mount SOIC.

The open-collector output is important because it allows the output voltage, rise time, and sink current to be adapted with an external pull-up resistor. It can directly support compatible logic families when the pull-up voltage and resistor are selected correctly. However, an open-collector output cannot source current independently, so the external pull-up is required in normal operation. Designers should also account for the propagation interval around the strobe control when timing system-level events.

Typical uses include zero-crossing detection, overvoltage and undervoltage monitoring, industrial control interfaces, relay or lamp drivers, and signal conditioning where a logic-level indication is required. The comparator can operate from 5 V in a logic-control board or from higher positive and negative rails when the monitored signals exceed single-supply limits. Its wide supply range allows one device family to serve multiple industrial and instrumentation architectures.

For robust layouts, keep the input traces short, place the output pull-up close to the comparator, and provide adequate ground-return paths. Do not allow floating input nodes during power transitions; use input bias resistors when necessary. Review the manufacturer datasheet for input common-mode limits, output sink-current limits, supply-current behavior, and absolute maximum ratings before operating the LM211DRG4 near its supply limits.

This page combines the exact LM211DRG4 ordering information with package, pinout, application, replacement, and design guidance. It also identifies same-footprint alternatives for design review while keeping separate the device's verified electrical limits and the practical conditions that determine whether it is suitable for a particular system.

Pilihan pengganti yang segera untuk LM211DRG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM211DRG4 (sama faktor bentuk dan kaki) — berbeza dalam Comparator Type, Logic Compatibility, Output Drive Capability, Package, Input Configuration.

onsemi
Comparator Type: Single high-speed voltage comparator
Logic Compatibility: DTL, MOS, RTL, and TTL
Package: 8-pin SOIC
Bandingkan Dengan LM211DRG4 →
Texas Instruments
Comparator Type: Single high-speed differential comparator
Logic Compatibility: DTL, MOS, RTL, and TTL
Output Drive Capability: Lamp or relay switching
Bandingkan Dengan LM211DRG4 →

LM211DR

✅ Masuk Drop-In
Texas Instruments
📦 SOIC-8
Single high-speed differential comparator · 115 ns · 3.5 V to 30 V · 5 V · ±15 V · Open-collector / open-emitter · DTL, MOS, RTL, and TTL · Differential

Hubungi untuk harga

Lihat Datasheet →

LM211DG

✅ Masuk Drop-In
onsemi
📦 SOIC-8
Single high-speed voltage comparator · 1 channel · 200 ns · 5 V to 30 V · ±15 V · Open-collector · DTL, MOS, RTL, and TTL · Inputs can be isolated from system ground

Hubungi untuk harga

Lihat Datasheet →

LM211DG4

✅ Masuk Drop-In
📦 SOIC-8
Same 8-pin SOIC footprint and LM211-family comparator architecture; ordering and qualification attributes may differ by 0% in core function.

📋 Alternatif rujukan (tidak dalam katalog)

LM211QDRG4

✅ Masuk Drop-In
📦 SOIC-8
Same SOIC-8 LM211-family footprint and function; qualification and suffix-specific temperature requirements differ while the cited comparator core is equivalent.

📋 Alternatif rujukan (tidak dalam katalog)

LM211QDREP

✅ Masuk Drop-In
📦 SOIC-8
Same 8-pin SOIC LM211-family architecture and pin arrangement; qualification and suffix-specific environmental ratings differ while the comparator function remains equivalent.

📋 Alternatif rujukan (tidak dalam katalog)

LM211DRG4 Penilaian maksimum & Ciri-ciri Elektrik

Comparator Type Single high-speed differential comparator with strobe
Number of Channels 1 channel
Single-Supply Operation 5 V
Positive and Negative Supply Support Up to ±15 V
Arus Pemberi Arus 5.1 mA
Logic Compatibility TTL and MOS output-level compatible
Output Architecture Open-collector
Output Drive Capability Capable of driving lamps or relays
Input Configuration Differential inputs: inverting and non-inverting
Strobe Control Yes
Gambaran Suhu Operasi -40°C to 85°C
Kemasan 8-pin SOIC (D package)
Package Type SOIC-8 surface-mount package
Bilangan Pin 8 pins

Konfigurasi Pin LM211DRG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT — Open-collector comparator output
Pin 2 -IN — Inverting input
Pin 3 +IN — Non-inverting input
Pin 4 GND — Ground connection
Pin 5 GND — Ground connection
Pin 6 STROBE — Output strobe control input
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected (per datasheet)

Aplikasi Biasa

LM211DRG4 patut untuk 6 aplikasis: Industrial Overvoltage Detection, TTL Logic Interface, Relay Driver Circuit, Zero-Crossing Detector, Power Supply Fault Monitor, Lamp Drive and Status Control.

🏭

Industrial Overvoltage Detection

The LM211DRG4 fits threshold-based overvoltage detection because it compares a monitored voltage against a reference and changes state when the differential input crosses the decision point. Its 5 V single-supply operation is convenient for logic-controlled industrial equipment, while its open-collector output can operate a relay, alarm, or status input through an external pull-up network. The 8-pin SOIC package supports compact PCB placement, and the -40°C to 85°C rating covers a broad range of industrial enclosure environments. Designers should verify the input common-mode range and output sink-current limits against the monitored circuit before implementation.

🔧

TTL Logic Interface

The LM211DRG4 is appropriate for a TTL interface because TI specifies that the LM211 output levels are compatible with most TTL and MOS circuits. A 5 V supply allows the device to sit directly in a 5 V logic system, while the open-collector output provides a flexible pull-up arrangement. Use a resistor network to establish the required high level and control the transition rate into the receiving gate. The single-channel architecture makes it useful for one isolated threshold or handshake signal rather than a full differential receiver.

⚡

Relay Driver Circuit

The LM211DRG4 can serve as the decision element in a relay-driver circuit because TI identifies the LM211 family as capable of driving lamps or relays. The comparator converts a voltage comparison into an open-collector switching event, which can control a pull-up and relay-driver transistor stage. This separation allows the comparator to operate from a low-voltage logic rail while the relay coil uses a separate supply. Confirm coil current, flyback protection, output sink rating, and isolation requirements during schematic design.

📡

Zero-Crossing Detector

The LM211DRG4 is suitable for a zero-crossing detector when a rapid output transition is needed around a reference crossing. Its high-speed differential-comparator architecture compares the input signal with a threshold, and the open-collector output can pull down a logic node through an external pull-up. The single 5 V supply simplifies digital-system integration, while the -40°C to 85°C operating range supports industrial and instrumentation environments. Keep feedback and input routing short to prevent oscillation or false transitions near the crossing point.

🔋

Power Supply Fault Monitor

The LM211DRG4 can monitor a power rail by comparing a scaled rail voltage with a reference and generating a fault indication when the difference crosses the selected threshold. The open-collector output provides a convenient way to combine an alarm signal with other open-collector nodes, subject to the pull-up design and sink-current limit. Its wide supply support allows operation in both 5 V control systems and higher positive or negative analog rails. Input attenuation, fault-response polarity, and startup behavior must be evaluated for the target power architecture.

💡

Lamp Drive and Status Control

The LM211DRG4 can drive a lamp or produce a status indication because the LM211 family is explicitly described as capable of driving lamps and relays. Its open-collector output works with an appropriate pull-up and, when necessary, an external driver stage. This makes it useful for threshold-activated annunciators, panel indicators, and process-equipment status lamps. The 8-pin SOIC package simplifies board assembly, but the selected lamp or transistor must remain within the comparator's output and thermal limits.

Ringkasan Produk Disebarkan

LM211DR Texas Instruments Dipergunakan di: Industrial Overvoltage Detection, TTL Logic Interface, Zero-Crossing Detector, Lamp Drive and Status Control LM211DG onsemi Dipergunakan di: Industrial Overvoltage Detection, Zero-Crossing Detector LM211QDRG4 Qualified LM211-family option Dipergunakan di: TTL Logic Interface, Power Supply Fault Monitor LM211DG4 LM211-family relay-control option Dipergunakan di: Relay Driver Circuit, Power Supply Fault Monitor LM211QDREP LM211-family qualified control option Dipergunakan di: Relay Driver Circuit, Lamp Drive and Status Control
What is the LM211DRG4?
The LM211DRG4 is a Texas Instruments single high-speed differential comparator with an open-collector output and strobe control, packaged in an 8-pin SOIC. According to the TI LM211 product page, the LM111, LM211, and LM311 devices operate from a wide range of supply voltages, including 5 V and ±15 V, and their outputs are compatible with common TTL and MOS circuits. The LM211DRG4 is the surface-mount SOIC ordering option with an operating-temperature range of -40°C to 85°C.
What is the operating voltage of LM211DRG4?
The LM211DRG4 supports a 5 V supply as well as positive and negative supplies up to ±15 V. The TI LM211 product page specifically describes operation from 5 V logic supplies and ±15 V operational-amplifier rails. This broad range permits the comparator to be used in both single-supply digital systems and dual-supply analog instrumentation, subject to the manufacturer datasheet limits for input common-mode voltage, supply current, and absolute maximum ratings.
Where can I download the LM211DRG4 datasheet PDF?
The official LM211DRG4 documentation is available through Texas Instruments at https://www.ti.com/product/LM211, with the exact orderable part listed at https://www.ti.com/product/LM211/part-details/LM211DRG4. Use the manufacturer's datasheet for the complete pin-description table, electrical characteristics, absolute maximum ratings, application information, and recommended operating conditions. The product listing identifies the device as an 8-pin SOIC differential comparator with strobes.
Where can I find the LM211DRG4 pinout?
The LM211DRG4 pinout is the standard 8-pin differential-comparator arrangement used by the LM211 family: pin 1 is OUT, pins 2 and 3 are the inverting and non-inverting inputs, pins 4 and 5 are ground connections, pin 6 is STROBE, pin 7 is the positive supply, and pin 8 is NC. The exact orderable-device page at https://www.ti.com/product/LM211/part-details/LM211DRG4 identifies the D-package configuration. Use the manufacturer pin-description table when assigning PCB nets.
What are the key specifications of LM211DRG4?
The LM211DRG4 is a one-channel, high-speed differential comparator in an 8-pin SOIC package, with a 5.1 mA supply-current rating, 5 V single-supply operation, support for ±15 V supplies, open-collector output, and a -40°C to 85°C operating range. According to the TI LM211 product page, output levels are compatible with common TTL and MOS circuits, and the device can drive lamps or relays. Exact input thresholds and timing limits should be taken from the manufacturer datasheet.
Can LM211DRG4 drive TTL and MOS logic?
Yes, the LM211DRG4 output levels are compatible with most TTL and MOS circuits when the external pull-up and output network are designed for the particular load. TI states that the LM111, LM211, and LM311 output levels are compatible with most TTL and MOS circuits and that the devices can drive lamps or relays. Because the LM211 output is open-collector, an appropriate pull-up resistor is required to establish the inactive output level.
What is the difference between LM211DRG4 and LM211DR?
The LM211DRG4 and LM211DR use the same SOIC-8 comparator footprint and are functionally compatible parts in the LM211 family. The comparison information identifies both as 8-pin, single-channel SOIC devices with consistent terminals and performance characteristics. Ordering codes distinguish the delivery or qualification configuration rather than changing the core comparator function. Confirm the suffix-specific temperature, packaging, and qualification requirements in the manufacturer part details before substitution.
Is LM211DRG4 the same as LM211DG4?
The LM211DRG4 and LM211DG4 are both TI LM211-family differential comparators in an 8-pin SOIC package, but their ordering suffixes identify different catalog configurations. The LM211DRG4 is identified by TI as the D-package orderable part, while LM211DG4 is listed in the comparison material as an SOIC-8 alternative with the same pin count and terminal arrangement. Review package dimensions, temperature grade, qualification, and production status for the exact suffix before treating them as interchangeable.
When should I choose LM211DRG4 over LM211QDRG4?
Choose LM211DRG4 for a standard-temperature SOIC implementation unless the design requires the qualification or environmental attributes associated with LM211QDRG4. The LM211QDRG4 is a TI part-detail option for the same LM211 family and 8-pin SOIC class, while LM211DRG4 is specified from -40°C to 85°C. The Q-prefixed option should be selected when its automotive qualification and associated temperature requirements match the system.
What is the best drop-in replacement for LM211DRG4?
LM211DR is the closest listed drop-in choice because it retains the SOIC-8 footprint, one-channel differential-comparator function, and matching terminal arrangement. LM211DG, LM211DG4, LM211QDRG4, and LM211QDREP are additional LM211-family SOIC options identified in the cross-reference material. Verify suffix-specific temperature range, qualification, supply-current limits, and lifecycle status before production use. Use the Request a Quote form on this page for availability and current sourcing support.
Can LM211DG replace LM211DRG4 without changing the PCB?
Yes, LM211DG is listed as an 8-pin SOIC comparator with the same functional and terminal arrangement as LM211DRG4, so it is a drop-in candidate on the same PCB footprint. The comparison material identifies 8 pins, surface mounting, and SOIC-8 construction for both devices. Confirm the exact operating-temperature grade, qualification, and manufacturer ordering details before approving the substitution, especially for production or automotive requirements.
Is LM211DRG4 suitable for relay and lamp drive?
The LM211DRG4 is suitable for relay and lamp drive when the output network and supply limits are designed correctly. TI states that the LM111, LM211, and LM311 devices can drive lamps or relays, and their outputs are compatible with common TTL and MOS logic. The open-collector stage requires a suitable pull-up and must remain within the comparator's specified sink-current, voltage, and thermal limits.
How should an LM211DRG4 open-collector output be connected?
Connect the LM211DRG4 open-collector output through a suitable pull-up resistor to the voltage required by the receiving logic or load. The resistor establishes the high output level and limits current during the comparator's low-output state. Select the pull-up to satisfy the logic-family thresholds, output rise-time requirements, and maximum sink current. Do not omit the pull-up because an open-collector output cannot independently source the high-state current.
How does the LM211DRG4 strobe input affect operation?
The LM211DRG4 strobe input provides control over whether the comparator can change its output state. Its logic behavior and timing must be observed when sequencing a system because the output can be inhibited during the strobe condition. According to the TI product description, the LM211 is a differential comparator with strobes. Use the manufacturer timing characteristics to determine setup and hold requirements around a controlled sampling or switching event.
Where can I buy LM211DRG4 and check its price and lead time?
Use the Request a Quote form on this page to request the current LM211DRG4 unit price, stock position, lead time, and order quantity. The commercial listing confirms that LM211DRG4 is available in an 8-pin SOIC package, while current market conditions can change by region, quantity, and date. XAIPART can confirm the exact orderable suffix and supply status before you commit the component to a production BOM.
Is LM211DRG4 compliant with RoHS and REACH?
RoHS and REACH status must be confirmed for the exact LM211DRG4 ordering configuration before treating it as compliant. Cross-reference pages for the LM211 family discuss RoHS and REACH attributes, but the available product information does not state their final values. Request the manufacturer compliance declaration or material declaration for the exact MPN. If automotive qualification is required, review the separate LM211QDRG4 option and its AEC-Q100 documentation.

Data referensi kejuruteraan untuk LM211DRG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM211DRG4 when the design requires a TI single differential comparator in an 8-pin SOIC package, 5 V operation or support for positive and negative supplies, open-collector logic interfacing, and a standard -40°C to 85°C temperature range. LM211DR is the closest listed functional alternative because it shares the SOIC-8 footprint, one-channel architecture, and cited 5.1 mA supply-current rating. LM211DG and LM211DG4 also preserve the 8-pin surface-mount layout and are useful for catalog or sourcing consolidation. Select LM211QDRG4 or LM211QDREP when the system requires the qualification attributes associated with those Q-prefixed configurations rather than the standard LM211DRG4 grade. In every case, confirm the exact suffix-specific temperature rating, lifecycle status, electrical limits, and qualification documentation. Because the output is open-collector, the external pull-up, load current, rise time, and protection network remain central to a successful replacement rather than package compatibility alone.

Perbandingan dengan Gantian

Parametr Produk Ini LM211DR LM211DG LM211DG4 LM211QDRG4 LM211QDREP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package SOIC-8 SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same SOIC-8 - same
Comparator Type Single differential comparator with strobe Single differential comparator Single differential comparator Single differential comparator Single differential comparator Single differential comparator
Number of Channels 1 channel 1 channel 1 channel 1 channel 1 channel 1 channel
Number of Pins 8 pins 8 pins 8 pins 8 pins 8 pins 8 pins
Mounting Style Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount
Qualification Class Standard grade Standard grade Standard grade Standard grade Q-prefixed qualification option Q-prefixed qualification option

Penyeberangsung Jelas

  • Exact family-level drop-in option without changing the SOIC-8 footprint (vsLM211DR)
  • Direct PCB reuse with the LM211 DG ordering configuration (vsLM211DG)
  • Qualified LM211-family option available for stricter design requirements (vsLM211QDRG4)
  • Seven-pin-equivalent functional scale is unnecessary because the full LM211 footprint remains available (vsLM211QDREP)

Catatan Desain

Do not treat the open-collector output as a push-pull logic output. Install an external pull-up resistor to establish the inactive high level, and select its value so the output remains within the sink-current limit while meeting the receiving logic's rise-time requirement. Check the maximum output voltage, output current, and operating-temperature limits in the manufacturer datasheet before connecting a relay, lamp, or TTL load.

Keep the two input nets short and route them away from the output and pull-up node to reduce feedback from output transients. Provide a low-impedance ground return for both GND pins and place the output pull-up close to the comparator. If either input can become unpowered or floating during startup, add suitable bias resistors or redesign the interface so the differential input remains in a defined state.

Use separate supply-decoupling paths for the comparator and any relay or lamp load so switching transients do not disturb the logic rail. Decouple the LM211 supply close to pins 7 and the ground pins with a high-frequency capacitor and a suitable bulk reservoir. Because the device supports 5 V and positive or negative rails up to ±15 V, verify the actual supply configuration and common-mode limits for both input signals.

Account for the strobe input when defining valid output states. A system that treats OUT as always reflecting the instantaneous input comparison can behave incorrectly during strobe intervals. Review the truth table and timing characteristics in the manufacturer datasheet, and design external logic so downstream circuitry interprets the inhibited state correctly. This is especially important in pulsed sensing, latching, and sampled-measurement systems.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The cross-reference material discusses RoHS and REACH attributes but does not provide final compliance values for LM211DRG4. The standard LM211DRG4 orderable part is not identified as an automotive-qualified option; use the LM211QDRG4 documentation for an automotive-qualified family configuration.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LM211DRG4 datasheet LM211DRG4 pinout LM211DRG4 datasheet pdf LM211DRG4 equivalent LM211DRG4 replacement LM211DRG4 price LM211DRG4 stock Texas Instruments LM211DRG4 LM211DRG4 SOIC-8 pinout LM211DRG4 vs LM211DR LM211DRG4 relay driver LM211DRG4 open collector output

Komponen dan Tanda berkaitan

Texas Instruments LM211DRG4 LM211DR LM211DG LM211DG4 LM211QDRG4 LM211QDREP LM111 LM311 differential comparator comparator interface IC semiconductor open-collector output strobe control supply voltage TTL MOS logic SOIC-8 surface mount SMD relay driver lamp driver overvoltage detection zero-crossing detector
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ