Texas Instruments

LM211QDG4 - 115ns Differential Comparator | Texas Instruments

MPN: LM211QDG4 ✓ Aktif
3.5 V to 30 V Vdss 8-pin SOIC (D) Package
MOQ: 1 |

LM211QDG4 Ringkasan

Texas Instruments LM211QDG4 is a single, high-speed differential comparator with strobe, operating from 3.5 V to 30 V or from split ±15 V supplies in an 8-pin SOIC package. Its principal switching characteristics include a 115 ns propagation delay, and its open-collector output is compatible with TTL and MOS logic. The device is supplied in a tube as LM211QDG4.

A voltage comparator is an analog semiconductor that compares two input voltages and changes its output state when the differential input crosses a selected threshold. The LM211 belongs to the comparator hierarchy within analog integrated circuits, where it bridges analog sensing and digital logic. Unlike a general-purpose operational amplifier, its primary purpose is fast binary decision-making rather than linear signal amplification.

The LM211QDG4 accepts a wide supply range, allowing operation from a single 5 V logic rail or from higher single-ended and split-supply systems. Its open-collector output can sink current for driving lamps, relays, and logic-compatible interfaces. The differential inputs permit either inverting or non-inverting threshold configurations, while the strobe control provides a way to disable output-state changes during selected operating intervals.

At 115 ns propagation delay, the LM211 is intended for systems that need faster threshold decisions than general-purpose slow comparators. Its output architecture requires an external pull-up arrangement for conventional open-collector operation. Designers must also account for input common-mode range, output pull-up voltage, and external pull-up current when connecting the device to a particular logic family.

Typical uses include industrial control and monitoring, relay or lamp drive, threshold detection, sensor conditioning interfaces, and mixed analog-to-digital signal chains. The LM211 can also be used in pulse-width and timing-related circuits when comparator response time is important. For systems using differential sensing, the two input pins and the output pull-up network form the core of the interface.

A careful design should preserve input-to-output isolation, route comparator inputs away from high-current switching paths, and select a pull-up resistor that balances rise time with output-current demand. The strobe pin should be driven from a defined logic state rather than left floating, and the power rails must satisfy the device's common-mode and supply requirements.

This product page organizes the electrical characteristics, package details, verified drop-in alternatives, application guidance, and selection trade-offs into a single engineering reference for evaluating the LM211QDG4.

Pilihan pengganti yang segera untuk LM211QDG4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM211QDG4 (sama faktor bentuk dan kaki) — berbeza dalam Output Load Capability, Output Type.

Texas Instruments
Output Load Capability: Lamp and relay driving
Output Type: Open-collector and open-emitter
Bandingkan Dengan LM211QDG4 →

LM211DG4

✅ Masuk Drop-In
📦 8-pin SOIC (D)
Same 8-SOIC LM211 comparator architecture and 3.5 V to 30 V supply class; the non-Q ordering designation differs, producing approximately 0% change in the cited core voltage and package ratings.

📋 Alternatif rujukan (tidak dalam katalog)

LM211QD

✅ Masuk Drop-In
Texas Instruments
📦 8-pin SOIC (D)
Single differential comparator with strobe · 115 ns · 3.5 V to 30 V · 1 channel · Open-collector and open-emitter · 300 nA · 70 nA · Yes

Hubungi untuk harga

Lihat Datasheet →

LM211QDRG4

✅ Masuk Drop-In
📦 8-pin SOIC (D)
Same 8-SOIC LM211 architecture, 3.5 V to 30 V supply range, and 115 ns response class; delivery and ordering codes differ, with approximately 0% change in the cited core voltage, timing, and package ratings.

📋 Alternatif rujukan (tidak dalam katalog)

LM211QDG4 Penilaian maksimum & Ciri-ciri Elektrik

Comparator Type Single differential comparator with strobe
Supply Voltage Range 3.5 V to 30 V
Split Supply Operation ±15 V
Propagation Delay 115 ns
Jenis Output Open-collector
Logic Compatibility TTL and MOS compatible
Input Configuration Differential
Strobe Control Yes
Kemasan 8-pin SOIC (D)
Package Body Width 3.90 mm (0.154 in)
Jenis Pemasangan Surface mount
Automotive Qualification AEC-Q100
Output Load Capability Lamp or relay drive

Konfigurasi Pin LM211QDG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 OUT E — Open-collector output emitter
Pin 2 IN− — Inverting input
Pin 3 IN+ — Non-inverting input
Pin 4 V− — Negative supply or ground connection
Pin 5 STROBE — Output strobe control
Pin 6 OUT C — Open-collector output collector
Pin 7 V+ — Positive supply connection
Pin 8 NC — Not connected

Aplikasi Biasa

LM211QDG4 patut untuk 6 aplikasis: Industrial Threshold Control, Relay and Lamp Drive, Sensor Signal Conditioning, Pulse Width and Timing, Automotive Control Interface, Analog-to-Digital Threshold Front End.

🏭

Industrial Threshold Control

The LM211QDG4 fits industrial threshold-control circuits because its differential inputs compare a feedback or reference voltage against a sensed level, while its 115 ns propagation delay provides a relatively quick decision. The open-collector output can operate a relay or lamp interface when the required sink current and voltage ratings are met. In a control board, the comparator can translate an analog condition into a logic event without adding a general-purpose amplifier stage. A pull-up resistor defines the logic high, while the strobe input should be tied to a defined state when continuous monitoring is required. The AEC-Q100 designation also supports designs where automotive qualification is part of the procurement specification.

⚡

Relay and Lamp Drive

The LM211QDG4 can be used as the decision element in relay or lamp drive circuits because its open-collector output is designed to sink load current and the device supports a wide 3.5 V to 30 V operating range. A pull-up resistor establishes the inactive output level, while the comparator output controls the load path. The 115 ns delay is short enough for many pulse and threshold systems, although relay-coil flyback protection and output-current derating remain essential. Designers should calculate the maximum sink current and voltage from the manufacturer limits before adding a load directly to the output.

🧩

Sensor Signal Conditioning

The LM211QDG4 is useful at the output of sensor-conditioning circuits where a differential analog signal must be converted into a logic-compatible threshold event. Its differential inputs permit direct comparison of a sensor-derived voltage and a reference, reducing the need for a single-ended input arrangement. The 115 ns propagation delay supports responsive event detection, and the open-collector output simplifies interfacing to TTL or MOS logic through a pull-up. For slow sensors this speed is more than adequate; for fast signals, input capacitance, overdrive, and output rise time require a more complete timing analysis.

📱

Pulse Width and Timing

The LM211QDG4 can serve in pulse-width, pulse-detection, and timing circuits because it changes state when the differential input crosses the switching threshold. Its 115 ns propagation delay establishes a relatively fast decision interval, allowing short pulses to be detected more effectively than with a slow comparator. The strobe function can inhibit output transitions during portions of the timing sequence. When using the open-collector output, the pull-up resistance and capacitance of the following logic determine the falling and rising behavior, so timing calculations should include both comparator delay and external output-network delay.

🚗

Automotive Control Interface

The LM211QDG4’s AEC-Q100 designation makes it relevant to automotive electronic control and monitoring functions requiring a qualified comparator in an 8-pin SOIC package. The differential inputs can monitor a sensor against a threshold, and the 115 ns response supports prompt conversion of the analog condition into a digital event. Its open-collector output can connect to an appropriately protected logic or driver stage, with the pull-up network and external transient protection designed for the vehicle environment. Selection should still include review of temperature grade, supply limits, common-mode range, and load current.

🖥️

Analog-to-Digital Threshold Front End

The LM211QDG4 can provide a fast threshold front end ahead of a digital conversion or monitoring system. A scaled sensor voltage is compared with a reference, and the comparator produces a discrete event when the input difference changes sign. The differential input arrangement is useful when the signal source and reference share a common reference point, while the 115 ns delay allows the decision to track relatively rapid changes. The open-collector output can drive a pull-up and digital input directly when levels and capacitance permit. Layout should keep the input path short, place the pull-up close to the load, and avoid routing sensitive threshold traces beside switching nodes.

What are the key specifications of LM211QDG4 that engineers should know?
The LM211QDG4 is a single high-speed differential comparator with a 115 ns propagation delay, a 3.5 V to 30 V supply range, an open-collector output, and an 8-pin SOIC package. According to the Texas Instruments LM211 datasheet, it supports single 5 V logic supplies as well as ±15 V split supplies, and its output levels are compatible with TTL and MOS circuits. The LM211QDG4 is identified as an AEC-Q100 automotive variant and is packaged in a tube.
Where can I download the LM211QDG4 datasheet PDF?
The LM211QDG4 datasheet PDF is available from the official Texas Instruments product documentation for the LM211 family. The manufacturer document covers the LM111, LM211, and LM311 comparators, including supply-voltage limits, input characteristics, output behavior, timing, and typical application circuits. Use the TI LM211 product page or the official LM211 datasheet link for the authoritative document and any current revision.
Where can I find the LM211QDG4 pinout?
The LM211QDG4 pinout is shown in the pin-configuration diagram in the manufacturer LM211 datasheet. It is an 8-pin SOIC device with differential inputs, supply terminals, output connections, a strobe control, and one no-connect position. When assigning PCB tracks, use the numbered pin diagram and the pad layout from the package drawing rather than inferring connections from another member of the comparator family.
Is the LM211QDG4 suitable for 5 V TTL and MOS logic systems?
Yes, the LM211QDG4 is designed to operate from a 5 V supply and provide output levels compatible with most TTL and MOS circuits. The manufacturer describes the LM211 family as usable across a wide power-supply range, including 5 V logic systems and ±15 V analog supplies. Because the output is open-collector, an appropriate external pull-up is still required for normal high-level output operation.
What is the propagation delay of the LM211QDG4?
The LM211QDG4 has a propagation delay of 115 ns. According to the Texas Instruments LM211 product and comparison information, this makes the device suitable for threshold-detection and switching tasks that require a faster response than slow general-purpose comparators. Actual end-to-end delay depends on the input overdrive, output pull-up network, load capacitance, and the logic device connected to the open-collector output.
Where can I buy LM211QDG4 online and check current availability?
The current commercial route for LM211QDG4 is the Request a Quote form on this page. Enter the exact MPN LM211QDG4 to request current availability, lead time, and order handling for the tube packaging. Quotation requests preserve the distinction between the exact LM211QDG4 orderable part and related LM211 variants that use different grade, temperature, or delivery designations.
What is the price of LM211QDG4?
Use the Request a Quote form on this page for the current commercial terms of LM211QDG4. The form is the appropriate route for an exact-MPN request because the tube packaging, order quantity, delivery schedule, and market availability can affect the final quotation. Do not substitute pricing for LM211DG4, LM211QD, or another related suffix when requesting this exact part.
What is the lead time for LM211QDG4?
Current lead time and minimum order quantity for LM211QDG4 should be requested through the Request a Quote form on this page. The exact orderable MPN is LM211QDG4 in tube packaging, so a quote request should specify that suffix exactly. This avoids confusion with SOIC variants identified by different delivery, grade, or qualification codes.
Is LM211QDG4 in stock?
Use the Request a Quote form on this page to obtain a current stock response for LM211QDG4. Stock status can change by package, order quantity, and regional fulfillment location, so it should be confirmed against the exact tube-packaged MPN. The quotation response should state available quantity, expected lead time, and any minimum-order constraint.
LM211QDG4 vs LM211DG4 - which is better for a new design?
Choose LM211QDG4 when the design specifically requires the Q-designated, AEC-Q100 automotive variant in tube packaging. LM211DG4 is the related non-Q-designated ordering option shown in the same 8-SOIC family. Both use the LM211 differential-comparator architecture and the same supply class, so the practical decision is primarily the qualification designation and exact ordering configuration required by the end product.
When should I choose LM211QDG4 over LM211DG4?
Choose LM211QDG4 when automotive qualification and the exact LM211QDG4 ordering designation are required by the application or customer specification. Choose LM211DG4 when a non-Q-designated SOIC variant is acceptable and procurement needs that exact MPN. Both retain the same basic differential input, strobe, wide-supply, and open-collector functions, but designers should verify the grade and qualification requirements before substitution.
What can replace LM211QDG4?
The closest documented drop-in options are LM211DG4, LM211QD, and LM211QDRG4 because each uses the LM211 family’s 8-pin SOIC comparator arrangement. The replacement should be selected by exact electrical characteristics, qualification, temperature grade, and delivery format rather than package appearance alone. The strobe, differential inputs, supply range, and open-collector output must all remain functionally consistent with the original board.
Is LM211DG4 the same as LM211QDG4?
LM211DG4 and LM211QDG4 belong to the same LM211 differential-comparator family and use the 8-pin SOIC package, but their ordering designations identify different grade configurations. LM211QDG4 is identified with the Q automotive AEC-Q100 designation, while LM211DG4 is the non-Q ordering option. They are related drop-in candidates, but qualification, temperature, and procurement requirements still need to be checked before interchange.
What is the best Texas Instruments equivalent for LM211QDG4?
Texas Instruments offers several ordering options within the LM211 8-SOIC family, including LM211DG4, LM211QD, LM211QDRG4, and LM211QDRQ1. For a direct design review, compare these options against the LM211QDG4 electrical table and qualification requirements. LM211DG4 and LM211QD are documented alternatives in the same family; automotive qualification and exact ordering codes remain the decisive selection criteria.
How should an LM211QDG4 open-collector output be connected to logic?
Connect the open-collector output to the required supply through a suitable pull-up resistor and add the intended logic load at that node. The resistor value sets the rise time, available high-level current, and switching behavior. According to the manufacturer LM211 datasheet, output levels are compatible with TTL and MOS circuits, but the external pull-up and load must be selected together to maintain adequate timing and logic-level margins.

Data referensi kejuruteraan untuk LM211QDG4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM211QDG4 when the BOM specifically requires the Q-designated, AEC-Q100 LM211 configuration in tube packaging. It combines a 3.5 V to 30 V supply range, 115 ns propagation delay, differential inputs, strobe control, and an open-collector output in an 8-pin SOIC package. LM211DG4 is appropriate when the non-Q ordering designation is acceptable and qualification requirements permit it. LM211QD offers the same family architecture with a different ordering code, while LM211QDRG4 uses a different delivery configuration. For any substitution, verify the exact input offset, common-mode range, output sink current, supply current, temperature range, and qualification. The open-collector output also means the pull-up resistor and load must be designed regardless of which LM211 ordering option is selected.

Perbandingan dengan Gantian

Parametr Produk Ini LM211DG4 LM211QD LM211QDRG4
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D) 8-pin SOIC (D)
Comparator Configuration Single differential comparator with strobe Single differential comparator with strobe Single differential comparator with strobe Single differential comparator with strobe
Supply Voltage Range 3.5 V to 30 V 3.5 V to 30 V 3.5 V to 30 V 3.5 V to 30 V
Propagation Delay 115 ns 115 ns 115 ns 115 ns
Output Type Open-collector Open-collector Open-collector Open-collector
Logic Compatibility TTL and MOS compatible TTL and MOS compatible TTL and MOS compatible TTL and MOS compatible
Strobe Control Yes Yes Yes Yes

Penyeberangsung Jelas

  • Q-designated automotive ordering configuration (vsLM211DG4)
  • Exact tube-packaged orderable MPN (vsLM211QDRG4)
  • Differential sensing with integrated strobe control (vsLM211QD)

Catatan Desain

The LM211QDG4 uses an open-collector output, so a pull-up resistor is required for normal logic-high operation. Select it from the output sink-current limit, the load’s allowable low-level voltage, and the required rise time. Excessive resistance slows the rising edge, while insufficient resistance increases sink current. Do not connect the output to a supply or ground directly; use it as the switched node with the pull-up and load connected from that node to the appropriate rail.

Keep the inverting and non-inverting input traces short, match their surrounding ground references where practical, and keep them away from relay-coil, switch-node, and high-current return paths. Place the output pull-up close to the comparator or receiving logic input to minimize parasitic capacitance. The strobe trace should also be kept short and driven by a defined logic level. These measures reduce noise pickup, output-edge distortion, and unintended threshold transitions.

Confirm that the selected supply arrangement satisfies both the comparator’s supply-voltage limits and its input common-mode range. The LM211 family supports 5 V logic systems as well as ±15 V split supplies, but the allowed input range is not identical to the supply range. Bypass the supply pins with the capacitance specified by the manufacturer’s recommended layout, and keep the return-current path short so switching current from the load does not modulate the comparator reference node.

Estimated timing analysis: with a 115 ns comparator propagation delay, the output-transition timing budget should also include the pull-up network’s rise time and the receiver’s threshold crossing. For a pull-up resistance of 1 kΩ and 50 pF total node capacitance, the estimated 10%–90% output rise time is 110 ns using 2.2RC. Use this only as a design estimate and verify it against the actual load, tolerances, and required system timing.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

AEC-Q100 is identified in the product listing for LM211QDG4. Other environmental and material compliance attributes are not established by the cited product information.

Pencarian Berhubungan

LM211QDG4 datasheet LM211QDG4 pinout LM211QDG4 datasheet pdf LM211QDG4 equivalent LM211QDG4 replacement LM211QDG4 cross reference LM211QDG4 vs LM211DG4 LM211QDG4 footprint LM211QDG4 price LM211QDG4 stock Texas Instruments LM211QDG4 LM211QDG4 115ns comparator LM211QDG4 SOIC-8 LM211QDG4 application circuit LM211QDG4 open collector output

Komponen dan Tanda berkaitan

Texas Instruments LM211QDG4 LM211DG4 LM211QD LM211QDRG4 LM211 voltage comparator differential comparator analog comparator semiconductor open-collector output propagation delay strobe control differential input common-mode voltage range TTL logic MOS logic SOIC-8 SOIC package surface-mount package AEC-Q100 industrial control automotive electronics sensor signal conditioning
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ