Texas Instruments

LM2900NE4 - Quad Norton Op Amp, 2.5 MHz | Texas Instruments

MPN: LM2900NE4 ✓ Aktif
Up to 15 V Vdss 14-PDIP, 0.300 inch pitch Package Internal frequency compensation Speed
MOQ: 1 |

LM2900NE4 Ringkasan

The Texas Instruments LM2900NE4 is a quad, high-gain, frequency-compensated Norton operational amplifier packaged in a 14-pin PDIP. It contains four independent amplifier sections in one package and is designed for general-purpose analog signal conditioning. The device operates from single or split supplies and supports a wide range of supply voltages, with a listed operating range up to 15 V. Its 2.5 MHz gain-bandwidth product and 20 V/µs slew rate provide useful bandwidth for low-frequency instrumentation, signal conditioning, filtering, and general analog processing.

The LM2900NE4 uses the Norton current-feedback operational-amplifier architecture. Unlike a conventional voltage-feedback amplifier, the Norton topology is based on low-input-resistance current feedback and is well suited to applications where the source impedance and feedback network are compatible with that operating principle. Internal frequency compensation makes the amplifier convenient to use without external compensation components in closed-loop gain configurations specified by the manufacturer.

Key specifications include four amplifier circuits, a 2.5 MHz gain-bandwidth product, a 20 V/µs slew rate, and a 14-pin PDIP package. The device also provides wide supply-voltage operation, large output-voltage swing, output short-circuit protection, and low input-bias-current characteristics according to the LM2900 family information. These features make the LM2900NE4 suitable for industrial control, sensor interfaces, audio and communication signal paths, and test equipment.

The quad package can reduce board area when four similar analog functions are required. Each amplifier is independent, allowing the same device to implement four separate gain, buffering, comparison, or filtering functions. The PDIP format is also convenient for through-hole assembly, prototyping, repair, and applications where a large thermal pad is not required.

When designing around the LM2900NE4, verify the source impedance and feedback values against the manufacturer’s recommended operating conditions. Because the Norton architecture has different input and feedback considerations from a voltage-feedback op amp, do not substitute a conventional amplifier without checking stability, slew behavior, output swing, and bias-current requirements. Maintain adequate supply decoupling and observe the specified common-mode and output-voltage limits.

This product page combines the manufacturer family information, distributor package and availability references, technical comparisons, and practical design guidance to support component selection and replacement planning for the LM2900NE4.

Pilihan pengganti yang segera untuk LM2900NE4 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM2900NE4 (sama faktor bentuk dan kaki) — berbeza dalam Frequency Compensation, Package, Short-Circuit Protection.

Texas Instruments
Frequency Compensation: Internal
Package: 14-PDIP
Short-Circuit Protection: Yes
Bandingkan Dengan LM2900NE4 →

LM2900N

✅ Masuk Drop-In
Texas Instruments
📦 14-PDIP (0.300, 7.62mm)
4 independent amplifiers · Quad high-gain frequency-compensated Norton operational amplifier · 2.5 MHz · 20 V/µs · 4.5 V to 32 V · ±2.2 V to ±16 V · 14-PDIP · 14 pins

Hubungi untuk harga

Lihat Datasheet →

LM3900NE4

✅ Masuk Drop-In
📦 14-PDIP (0.300, 7.62mm)
Closely related Norton quad family; electrical limits and ordering details differ from LM2900NE4

📋 Alternatif rujukan (tidak dalam katalog)

LM2900NE4 Penilaian maksimum & Ciri-ciri Elektrik

Number of Amplifier Circuits 4 circuits
Amplifier Type General-purpose operational amplifier
Architecture Quad high-gain frequency-compensated Norton current-feedback amplifier
Gain-Bandwidth Product 2.5 MHz
Slew Rate 20 V/µs
Tegangan Pemberi Arus Up to 15 V
Supply Configuration Single or split supply
Kemasan 14-PDIP, 0.300 inch pitch
Package Type Through-hole PDIP
Frequency Compensation Internal frequency compensation
Output Voltage Swing Large output voltage swing
Short-Circuit Protection Output short-circuit protection

Panduan Konfigurasi Pin LM2900NE4 through-hole pdip

Konfigurasi pin untuk LM2900NE4 (through-hole pdip pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai through-hole pdip untuk LM2900NE4

Tiada data garisan pin yang diperoleh untuk LM2900NE4.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LM2900NE4 patut untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Audio and Communication Signal Paths, Power Supply Monitoring and Control Loops, Test and Measurement Front Ends, Active Filtering and Waveform Conditioning, Legacy Through-Hole Control Boards.

🏭

Industrial Sensor Signal Conditioning

The LM2900NE4 is suitable for conditioning signals from sensors whose source impedance is compatible with the LM2900 Norton architecture. Its four independent amplifier sections can support multiple conditioning channels within one 14-pin PDIP device. A 2.5 MHz gain-bandwidth product permits useful bandwidth for general-purpose industrial measurement, while the 20 V/µs slew rate supports faster signal transitions. The design must follow the manufacturer’s recommended feedback values and source-impedance limits; otherwise stability and usable bandwidth can differ from conventional voltage-feedback amplifier behavior.

🌐

Audio and Communication Signal Paths

The LM2900NE4 can process general audio-band and communication signals where a wideband quad amplifier is useful. Its 20 V/µs slew rate provides substantially faster large-signal movement than a basic low-frequency amplifier, while the 2.5 MHz gain-bandwidth product covers more than the audible band. Four amplifier sections allow mixing of buffering, gain, and filtering functions in one package. Check source impedance, feedback values, output swing, supply level, and stability against the LM2900 datasheet before using it in a new Norton current-feedback design.

⚡

Power Supply Monitoring and Control Loops

The LM2900NE4 can implement voltage comparison, error amplification, and auxiliary control functions in an industrial power-control board. Four independent amplifier sections allow several low-frequency feedback loops to share one package, and the 14-lead PDIP format is convenient for through-hole industrial control assemblies. The 2.5 MHz gain-bandwidth product is suitable for many slow regulation loops, while the 20 V/µs slew rate provides useful response margin. Verify the common-mode range and output swing at the actual supply voltage because the amplifier cannot drive outputs beyond its specified operating limits.

🔧

Test and Measurement Front Ends

The LM2900NE4 is appropriate for general-purpose instrumentation front ends when the Norton feedback network is selected correctly. Its four sections can be used for input conditioning, active filtering, gain stages, and output buffering, while the 2.5 MHz gain-bandwidth product supports bandwidth beyond traditional precision low-frequency amplifier limits. The 20 V/µs slew rate helps preserve large-signal waveform shape. For precision measurement, compare input bias current, offset, common-mode range, and noise against the application requirements rather than relying on bandwidth alone.

📡

Active Filtering and Waveform Conditioning

The LM2900NE4 can form active filters and waveform-conditioning stages where four related amplifier sections are advantageous. Its 2.5 MHz gain-bandwidth product provides the basis for moderate-bandwidth filter sections, and its 20 V/µs slew rate improves large-signal response compared with slower general-purpose amplifiers. Because this is a Norton current-feedback device, each feedback component and source impedance must be calculated for the intended closed-loop gain. Check output-current capability and output swing before driving heavy loads or producing large amplitude waveforms.

🖥️

Legacy Through-Hole Control Boards

The LM2900NE4 is especially practical for legacy control boards that use a 14-PDIP footprint and require four general-purpose amplifier functions. Its through-hole package supports conventional PCB insertion, socketed prototyping, and repair without a fine-pitch assembly process. The tube packaging identified for this ordering code also aligns with conventional component-handling workflows. For an existing board, confirm every pin function against the manufacturer pin-description table and verify operating temperature, supply voltage, bias current, and load-driving requirements before substitution or reuse.

What is LM2900NE4?
The LM2900NE4 is a Texas Instruments quad Norton operational amplifier with four independent, frequency-compensated amplifier sections in a 14-pin PDIP package. The manufacturer describes it as a high-gain device intended for general-purpose analog applications from single or split supplies. Its listed gain-bandwidth product is 2.5 MHz, and its slew rate is 20 V/µs.
What are the key specifications of LM2900NE4 that engineers should know?
The LM2900NE4 provides four amplifier circuits, a 2.5 MHz gain-bandwidth product, a 20 V/µs slew rate, and operation from single or split supplies up to 15 V. It uses internal frequency compensation and is housed in a 14-PDIP through-hole package. According to Texas Instruments family information, the device also includes large output-voltage swing, output short-circuit protection, and low input-bias-current characteristics.
What is the gain-bandwidth product of LM2900NE4?
The LM2900NE4 has a gain-bandwidth product of 2.5 MHz. This value is listed in the manufacturer-linked specification results and in the LM2900NE4 technical listing. It indicates the amplifier’s useful closed-loop bandwidth depends on the selected noise gain, so the feedback network and source impedance should be checked against the manufacturer’s recommended application conditions.
What is the slew rate of LM2900NE4?
The LM2900NE4 has a slew rate of 20 V/µs. This controls how quickly its output can move through larger voltage changes and helps determine large-signal response for waveform and signal-conditioning circuits. Texas Instruments identifies the LM2900 as a high-gain, frequency-compensated Norton amplifier, so conventional voltage-feedback amplifier stability rules should not be applied without checking the specified feedback and source impedances.
What package does LM2900NE4 use?
The LM2900NE4 uses a 14-pin PDIP package with a 0.300 inch, or 7.62 mm, pitch. The component is supplied in a tube according to the technical listing. The through-hole package supports conventional leaded assembly and is suitable for prototypes, legacy boards, repair, and industrial control systems that use PDIP footprints.
Where can I download the LM2900NE4 datasheet PDF?
The official Texas Instruments LM2900 product page is the preferred starting point for the LM2900NE4 datasheet and ordering information. It links the manufacturer documentation and describes the device as a quad, high-gain, frequency-compensated Norton operational amplifier. Use the manufacturer PDF for pin assignments, electrical limits, recommended circuits, and qualification details before releasing a design.
Where can I find the LM2900NE4 pinout?
The LM2900NE4 pinout is documented in the Texas Instruments LM2900 family datasheet, with the LM2900NE4 ordering option identified as a 14-pin PDIP device. Use the package drawing and pin-description table when assigning signals to PCB tracks. The same family contains several package and temperature options, so confirm that the selected diagram corresponds specifically to the 14-pin NE4 ordering code.
Is LM2900NE4 suitable for single-supply operation?
Yes, the LM2900NE4 is designed to operate from a single supply as well as from split supplies. The listed maximum supply voltage is 15 V. In a single-supply circuit, input and output signal levels must remain within the manufacturer’s common-mode and output-swing limits, and the ground reference must be placed correctly within the package pin assignments.
Can LM2900NE4 be used for signal conditioning?
The LM2900NE4 is well suited to general-purpose signal conditioning because it provides four amplifier sections, a 2.5 MHz gain-bandwidth product, and a 20 V/µs slew rate. Its Norton current-feedback architecture should be used with source impedances and feedback networks that meet the LM2900 operating recommendations. This makes it useful in filters, sensor interfaces, and general analog instrumentation when those conditions are satisfied.
LM2900NE4 vs LM2900N: which version should I choose?
LM2900NE4 and LM2900N are closely related orderable versions of the same LM2900 Norton quad amplifier family. The web comparison results identify both as general-purpose quadruple devices, while the NE4 ordering information identifies a 14-PDIP package. Choose by checking the exact suffix, package, temperature grade, lead finish, and ordering table against the PCB footprint rather than relying only on the family name.
LM2900NE4 vs LM3900NE4: which is better for a pin-compatible replacement?
The LM3900NE4 is a closely related quad Norton operational-amplifier candidate, but it should not be accepted as a drop-in replacement without comparing its exact pinout, supply limits, electrical characteristics, package dimensions, and temperature grade with LM2900NE4. The public comparison results establish functional similarity but do not by themselves prove complete parameter equivalence or PCB drop-in compatibility.
When should I choose LM2900NE4 over a conventional quad op amp?
Choose LM2900NE4 when the circuit can operate with a Norton current-feedback amplifier and its recommended feedback and source impedances. Its four sections, 2.5 MHz gain-bandwidth product, and 20 V/µs slew rate suit general analog signal conditioning. Retain a conventional voltage-feedback amplifier when its specified input impedance, noise, stability, and gain-network characteristics are better suited to the application.
What can replace LM2900NE4?
The closest replacement candidates are devices with the same 14-pin PDIP footprint, four Norton amplifier sections, and compatible supply and signal specifications. LM2900N and LM3900NE4 are relevant comparison parts, but each must be checked against the original datasheet for pin assignment and operating limits. Use the Request a Quote form on this page when requesting availability and sourcing support.
Where to buy LM2900NE4 online and what is its lead time?
The LM2900NE4 can be requested through the Request a Quote form on this page for current availability, quantity, and lead-time confirmation. The component is listed as an in-stock part by one supply source, but inventory changes continuously. Submit the required quantity, package preference, and target delivery date so the current manufacturing and distribution status can be checked.
What is the price and stock status of LM2900NE4?
Use the Request a Quote form on this page for the current unit price, stock quantity, and lot-break terms for LM2900NE4. The LM2900NE4 is shown as in stock by a distributor listing, but pricing and inventory are time-sensitive and may change without notice. The quote request provides a current commercial response for the exact 14-PDIP ordering code.

Data referensi kejuruteraan untuk LM2900NE4 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM2900NE4 when the design needs four Norton current-feedback amplifiers in a 14-pin PDIP package and can operate from a single or split supply up to 15 V. Its specified 2.5 MHz gain-bandwidth product and 20 V/µs slew rate make it appropriate for general signal conditioning, active filtering, instrumentation, and control-loop functions. LM2900N is the closest same-family ordering alternative when its suffix-specific temperature, lead-finish, and lifecycle details meet the design requirements. LM3900NE4 belongs to a related Norton amplifier family and may suit functionally similar circuits, but its electrical limits must be checked before substitution. A conventional quad voltage-feedback amplifier should be selected instead when low input impedance or Norton-specific feedback design is unsuitable.

Perbandingan dengan Gantian

Parametr Produk Ini LM2900N LM3900NE4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 14-PDIP (0.300, 7.62mm) 14-PDIP (0.300, 7.62mm) 14-PDIP (0.300, 7.62mm)
Number of Circuits 4 circuits 4 circuits 4 circuits
Amplifier Architecture Norton current-feedback Norton current-feedback Norton current-feedback

Penyeberangsung Jelas

  • Four independent Norton amplifier sections in one package (vsLM2900N)
  • Defined 2.5 MHz gain-bandwidth product and 20 V/µs slew rate (vsLM3900NE4)
  • Single-supply and split-supply operating capability (vsLM2900N)

Catatan Desain

Do not treat the LM2900NE4 as a conventional voltage-feedback operational amplifier when selecting feedback resistors. The Norton architecture requires the source impedance and feedback network to follow the LM2900 family recommendations. Review the manufacturer application information for the intended closed-loop gain, then check stability and usable bandwidth on the actual PCB. This prevents oscillation, unexpected gain, or poor transient response.

Place bypass capacitors close to the power-supply pins and keep the input and feedback tracks short to reduce parasitic inductance and capacitance. A PDIP layout should provide adequate clearance between adjacent traces, especially around high-impedance input nodes. Because high-impedance nodes are particularly sensitive in a Norton topology, avoid long parallel runs and keep nearby switching or high-current return paths physically separated.

Check the output-current demand and voltage drop across the amplifier when driving a load. The stated 20 V/µs slew rate is a large-signal response specification, not an output-current limit, and the device has a listed maximum supply voltage of 15 V. Keep the output within its specified swing range and include adequate supply bypassing. For calculations not taken directly from the manufacturer datasheet, label any derived dissipation and junction-temperature result as an estimate using the actual supply, output, load, and thermal resistance.

For instrumentation and waveform conditioning, verify gain-bandwidth behavior at the selected closed-loop gain rather than assuming the full 2.5 MHz is available. Also compare the 20 V/µs slew rate with the required output amplitude and frequency. A square wave at higher frequency can be limited by slew rate even when the small-signal bandwidth appears adequate. Confirm common-mode range, output swing, and load capacitance using the manufacturer data.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

No explicit compliance declarations were identified in the cited product and distributor records. Confirm RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status with the manufacturer for the exact ordering code.

Data disahkan pada: 2026-11-15 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

lm2900n datasheet LM2900NE4 datasheet LM2900NE4 datasheet pdf LM2900NE4 pinout LM2900NE4 14-DIP LM2900NE4 2.5MHz LM2900NE4 20V/us LM2900NE4 equivalent LM2900NE4 replacement LM2900NE4 vs LM3900NE4 LM2900NE4 price LM2900NE4 stock Texas Instruments LM2900NE4 LM2900NE4 quad Norton op amp LM2900NE4 signal conditioning

Komponen dan Tanda berkaitan

Texas Instruments LM2900NE4 LM2900N LM3900NE4 quad operational amplifier Norton operational amplifier current-feedback amplifier signal-conditioning amplifier analog amplifier integrated circuit semiconductor 14-PDIP PDIP package family through-hole package 2.5 MHz gain-bandwidth product 20 V/µs slew rate internal frequency compensation single-supply operation split-supply operation output short-circuit protection industrial control test and measurement active filtering sensor signal conditioning
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ