Texas Instruments

LM324KPWR - Quad 30V 1.2MHz Op Amp | Texas Instruments

MPN: LM324KPWR ✓ Aktif
30 V Vdss 14-pin TSSOP Package
MOQ: 1 |

LM324KPWR Ringkasan

The Texas Instruments LM324KPWR is a four-circuit general-purpose operational amplifier with a 30 V maximum supply rating, 1.2 MHz gain-bandwidth product, and improved 2 kV ESD protection. The device is packaged in a 14-pin TSSOP, combining four amplifiers in a compact surface-mount footprint. Each channel supports the standard op-amp functions of voltage amplification, filtering, buffering, summing, and difference amplification.

An operational amplifier is an analog integrated circuit that uses high-gain differential amplification to control an output voltage. The LM324 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog IC, and semiconductor. Its four channels share a positive supply, negative supply, and ground reference, making it useful where several independent low-frequency analog stages are required in the same board area.

The principal features include four amplifiers per package, a 1.2 MHz gain-bandwidth product, operation from a single supply or dual supplies, a 30 V maximum total supply rating, and 2 kV ESD protection. These characteristics suit general-purpose signal conditioning rather than precision or high-speed instrumentation. The quad organization also reduces component count and simplifies routing when one board section contains four similar low-frequency channels.

Each amplifier uses differential inputs, an output stage, bias compensation, and internal frequency compensation. The common design is intended for stable operation with feedback networks that define closed-loop gain. Because this is a general-purpose amplifier, input offset, input bias current, output-current capability, slew rate, and common-mode limits should be checked against the exact signal levels and load conditions before finalizing a design.

Typical uses include sensor-signal conditioning, low-frequency active filters, audio preamplification, comparators with suitable feedback, DC summing and difference stages, and general buffer or gain stages. The 14-pin TSSOP is appropriate for compact industrial, instrumentation, consumer, and embedded-control equipment where four analog channels are preferable to separate single or dual amplifier packages.

Layout and stability remain the primary implementation considerations. Keep input and feedback traces short, place compensation or bypass components close to their associated pins, and maintain a common ground reference across all four channels. Avoid long unprotected inputs and place external input clamps where exposed connectors can carry electrostatic discharge. Confirm the selected channel’s input and output swing against the intended supply rails.

This page consolidates the exact package, electrical headline ratings, drop-in alternatives, comparison parameters, and practical design guidance for LM324KPWR. It helps engineers identify the correct TI orderable MPN and assess whether the quad general-purpose amplifier meets a circuit’s voltage, bandwidth, ESD, footprint, and sourcing requirements.

Pilihan pengganti yang segera untuk LM324KPWR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LM324KPWR (sama faktor bentuk dan kaki) — berbeza dalam Amplifier Type, Package, Supply Configuration, Maximum Supply Voltage, RoHS Status.

Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Package: 14-pin TSSOP (PW)
Maximum Supply Voltage: 26 V
Bandingkan Dengan LM324KPWR →
Texas Instruments
Amplifier Type: General-purpose operational amplifier
Package: 14-pin TSSOP (PW)
Bandingkan Dengan LM324KPWR →
Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier, unity-gain stable
Package: 14-pin TSSOP (PW), 0.8 mm pitch
RoHS Status: Compliant
Bandingkan Dengan LM324KPWR →
Texas Instruments
Amplifier Type: Quad general-purpose operational amplifier
Bandingkan Dengan LM324KPWR →
Texas Instruments
Amplifier Type: Quad voltage-feedback operational amplifier
Package: 14-pin TSSOP (PW)
Supply Configuration: Single supply
Texas Instruments
Package: 14-TSSOP
Supply Configuration: Single supply or split supply
RoHS Status: Unknown
Bandingkan Dengan LM324KPWR →
Texas Instruments
Amplifier Type: General Purpose
Supply Configuration: Single supply or split supply
RoHS Status: RoHS-compliant
Bandingkan Dengan LM324KPWR →

LM324APWR

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
4 circuits · General-purpose operational amplifier · 30 V · 1.2 MHz · 3 mV · 0°C to 70°C · 14-pin TSSOP (PW) · 14 pins

Hubungi untuk harga

Lihat Datasheet →

LM324KAPW

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
Quad general-purpose operational amplifier · 4 channels · 4 circuits · 2 kV · 1.2 MHz · 14-pin TSSOP · TSSOP-14 · Surface mount

Hubungi untuk harga

Lihat Datasheet →

LM324PWRG3

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP
General Purpose · 4 circuits · 4 amplifiers · Four independent high-gain, frequency-compensated operational amplifiers · 1.2 MHz · 0.5 V/µs · 14-TSSOP · 0.173 in (4.40 mm)

Hubungi untuk harga

Lihat Datasheet →

LM324PWRE4

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP-BJ
Quad general-purpose operational amplifier · 4 circuits · 4 independent amplifiers · 1.2 MHz · 1 V/us · Up to ±16 V (32 V total) · Single supply or split supply · Push-pull

Hubungi untuk harga

Lihat Datasheet →

LM324PWRG3

✅ Masuk Drop-In
Texas Instruments
📦 14-TSSOP-BJ
General Purpose · 4 circuits · 4 amplifiers · Four independent high-gain, frequency-compensated operational amplifiers · 1.2 MHz · 0.5 V/µs · 14-TSSOP · 0.173 in (4.40 mm)

Hubungi untuk harga

Lihat Datasheet →

LM324KPWR Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Count 4 circuits
Device Type Quad general-purpose operational amplifier
Maximum Supply Voltage 30 V
Gain-Bandwidth Product 1.2 MHz
ESD Protection 2 kV
Kemasan 14-pin TSSOP
Package Width 4.40 mm
Jenis Pemasangan Surface mount
Number of Inputs and Outputs 8 inputs and 4 outputs
Supply Configuration Single or dual supply

Konfigurasi Pin LM324KPWR

TSSOP-14 (4.4mm) Package Pinout Diagram TSSOP-14 4.4x5mm, P0.65mm, JEDEC MO-153. 14-pin thin shrink. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 TSSOP-14 (4.4mm)
Pin 1 OUT1 — Amplifier 1 output
Pin 2 IN1- — Amplifier 1 inverting input
Pin 3 IN1+ — Amplifier 1 non-inverting input
Pin 4 V- — Negative supply or ground connection
Pin 5 IN2+ — Amplifier 2 non-inverting input
Pin 6 IN2- — Amplifier 2 inverting input
Pin 7 OUT2 — Amplifier 2 output
Pin 8 OUT3 — Amplifier 3 output
Pin 9 IN3- — Amplifier 3 inverting input
Pin 10 IN3+ — Amplifier 3 non-inverting input
Pin 11 V+ — Positive supply connection
Pin 12 IN4+ — Amplifier 4 non-inverting input
Pin 13 IN4- — Amplifier 4 inverting input
Pin 14 OUT4 — Amplifier 4 output

Aplikasi Biasa

LM324KPWR patut untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Audio Preamplification, Active Filter and Control, Battery-Powered Monitoring, LED Driver and Interface Circuits, Power Supply Feedback and Sequencing.

🏭

Industrial Sensor Signal Conditioning

The LM324KPWR fits four-channel industrial sensor conditioning when the signals fall within its low-frequency general-purpose performance class. Its four amplifiers can implement buffering, fixed or variable gain stages, active filters, and signal summing while sharing the same 30 V-class supply arrangement. The 1.2 MHz gain-bandwidth product is suitable for transducers with moderate bandwidth rather than fast sensor front ends. Keep high-impedance sensor wiring short, bypass the shared supply pins locally, and check input bias current when sensor-source impedance is high.

🎧

Audio Preamplification

The LM324KPWR can provide inexpensive, low-frequency audio preamplification when modest bandwidth and general-purpose precision are acceptable. Its 1.2 MHz gain-bandwidth product supports audio-band amplification, while four channels allow stereo and monitor paths to share one package. The common supply arrangement simplifies routing, although each channel still requires suitable input and feedback networks. For low-noise or high-fidelity designs, verify input offset voltage, input bias current, output swing, and load capability against the Texas Instruments manufacturer datasheet.

🔧

Active Filter and Control

The LM324KPWR is suitable for low-frequency active-filter and control applications built around four similar amplifier channels. Its 1.2 MHz gain-bandwidth product provides more bandwidth than strictly required by many audio, control, and instrumentation filters, while the quad package reduces board area. Compensation is internal, so closed-loop gain and stability should follow the manufacturer’s recommended circuits. Avoid using the device as a high-speed comparator or PWM edge-rate amplifier without checking slew rate, saturation recovery, and output-current behavior.

🔋

Battery-Powered Monitoring

The LM324KPWR can form part of battery-powered monitoring equipment because it combines four amplifier channels in one compact TSSOP package. The shared supply pins simplify power routing, while operation from a single supply supports systems where the signal must remain above ground. The 30 V maximum supply rating provides headroom, but actual minimum operating voltage and quiescent current must be checked in the manufacturer datasheet. Use low-leakage input biasing and confirm the output-swing limits at the selected supply and load.

💡

LED Driver and Interface Circuits

The LM324KPWR can implement error amplifiers, current-control loops, and interface stages for LED systems operating at moderate bandwidth. Its four channels allow a controller, feedback amplifier, and auxiliary signal-conditioning stages to be consolidated. Because the device is a general-purpose amplifier rather than a dedicated LED driver, output-current capability, output swing, and thermal conditions must be evaluated carefully. Select external transistor or driver stages when the LED load exceeds the amplifier’s output capability or when faster response is required.

⚡

Power Supply Feedback and Sequencing

The LM324KPWR can serve as a general-purpose feedback amplifier in linear or supervisory power-control circuits. Its four channels support error amplification, rail comparison, current-sense amplification, and sequencing logic interfaces when all signals remain inside the common-mode and output-swing limits. The 30 V-class supply capability is useful for monitoring higher-voltage rails, but the amplifier is not isolated and must not exceed its absolute supply rating. Keep feedback-node copper compact and provide a stable reference reference point for all channels.

What is the power supply requirement for LM324KPWR?
The LM324KPWR operates from a single supply or dual supplies, with the exact operating limits defined in the Texas Instruments manufacturer datasheet. The device family is identified for a 30 V maximum supply rating, so the total voltage across the positive and negative supply pins must not exceed that limit. Use the same supply rails for all four channels. For a single-supply circuit, connect the negative supply pin to ground and keep signal levels within the input and output common-mode ranges shown in the datasheet.
What are the power requirements for LM324KPWR?
The LM324KPWR requires a supply connection that respects its 30 V maximum total supply rating and the operating supply range listed in the Texas Instruments manufacturer datasheet. Four integrated amplifiers share the same positive and negative supply pins, so bypassing should be placed close to those package pins. Check quiescent current, output-current demand, and the output swing at the intended load before selecting the supply regulator. External capacitors should be chosen using the stability and transient-response guidance in the datasheet.
What are the key performance specifications of LM324KPWR?
The LM324KPWR combines four general-purpose operational amplifiers, a 1.2 MHz gain-bandwidth product, a 30 V maximum supply rating, and 2 kV ESD protection in a 14-pin TSSOP. According to the Texas Instruments manufacturer datasheet, it is intended for general-purpose low-frequency signal conditioning. Its headline attributes favor cost-sensitive analog systems rather than precision instrumentation or high-speed signal processing. Designers should also verify offset voltage, bias current, slew rate, common-mode range, and load drive against their circuit requirements.
How does LM324KPWR perform in PWM applications?
The LM324KPWR can shape and amplify low-frequency PWM-related signals, but its 1.2 MHz gain-bandwidth product makes it better suited to modest-bandwidth control or filtering than to high-edge-rate waveform reproduction. According to the Texas Instruments manufacturer datasheet, the device is a general-purpose amplifier with internal compensation. Use an appropriate low-pass filter when PWM ripple must be removed, and verify that the input amplitude, slew rate, output swing, and load do not exceed the operating limits for the selected configuration.
Where can I download the LM324KPWR datasheet PDF?
The LM324KPWR datasheet is accessible through the Texas Instruments LM324K product page and the linked manufacturer document archive. The document covers the 30 V, 1.2 MHz quad operational-amplifier family, electrical characteristics, ESD behavior, pin configuration, and application guidance. Use the package-specific ordering information to confirm that LM324KPWR corresponds to the 14-pin TSSOP configuration. The pin-description table in the manufacturer datasheet should also be used when assigning PCB nets.
Where can I find the LM324KPWR pinout?
The LM324KPWR pinout is shown in the pin-configuration section of the Texas Instruments manufacturer datasheet for the LM324K family. The device uses a 14-pin TSSOP containing four complete operational amplifiers. Its power pins are shared across the four channels, while each channel has two differential inputs and one output. Follow the package pin numbering in the manufacturer document rather than relying only on a generic 14-pin outline, and preserve the exposed package dimensions and lead orientation in the PCB footprint.
What can replace LM324KPWR?
The closest replacements are LM324APWR, LM324KAPW, and LM324PWRG3 because they use the same 14-pin TSSOP class and provide the same four general-purpose amplifier architecture. ROHM Semiconductor’s LM324PWR is another cross-brand option identified for direct comparison. Before replacement, verify the exact pin assignment, supply limits, offset voltage, bias current, bandwidth, and temperature requirements. A shared package name alone does not guarantee that every electrical or lifecycle condition matches.
Is LM324KPWR the same as LM324APWR?
LM324KPWR and LM324APWR are closely related Texas Instruments four-channel general-purpose amplifiers offered in a 14-pin TSSOP, but their ordering suffixes can encode different qualification or temperature options. According to the manufacturer product family documentation, LM324K is the improved-ESD variant of the industry-standard LM324 family. Treat LM324APWR as a strong drop-in candidate, then confirm the exact electrical table, operating-temperature grade, and ordering code before approving it for a production BOM.
What is the best ROHM Semiconductor equivalent for LM324KPWR?
ROHM Semiconductor’s LM324PWR is the strongest cross-brand candidate shown for LM324KPWR because both are four-channel, 1.2 MHz general-purpose operational amplifiers in a 14-pin TSSOP package. The available comparison identifies matching device classes and package format. Before substitution, check pinout, maximum supply voltage, input offset voltage, input bias current, output swing, and operating-temperature limits against the Texas Instruments manufacturer datasheet.
When should I choose LM324KPWR over LM324APWR?
Choose LM324KPWR when improved ESD protection is important, because the TI product family identifies LM324K as the improved-ESD version with 2 kV ESD protection. Both parts provide four general-purpose amplifier channels in a 14-pin TSSOP and share the 1.2 MHz performance class. LM324APWR may be appropriate when its exact qualification and electrical characteristics satisfy the design. The decision should be based on the ordering table, operating temperature, ESD requirement, and lifecycle status rather than package similarity alone.
Is LM324KPWR suitable for industrial sensor conditioning?
The LM324KPWR is suitable for many industrial sensor-conditioning circuits that operate within its 30 V maximum supply rating and 1.2 MHz bandwidth class. Its four channels can support buffering, amplification, filtering, and summing stages without using four separate packages. For low-level instrumentation, check input offset voltage and input bias current in the manufacturer datasheet, provide local supply bypassing, and protect externally accessible inputs with appropriate ESD protection.
What is the best drop-in replacement for LM324KPWR?
LM324APWR is a leading same-manufacturer drop-in candidate for LM324KPWR because it is a four-channel, 1.2 MHz general-purpose operational amplifier in the same 14-pin TSSOP format. LM324KAPW and LM324PWRG3 are additional same-brand candidates, while ROHM Semiconductor’s LM324PWR offers a cross-brand option. Verify the complete pin assignment and all electrical limits before replacement. TI states that improved LM324B and LM2902B versions can drop in for earlier LM324-family devices when the relevant package and electrical conditions match.
LM324KPWR vs LM324PWRG3 - which is better for a general-purpose amplifier?
LM324KPWR and LM324PWRG3 are both listed as four-circuit, 1.2 MHz general-purpose operational amplifiers in 14-TSSOP packages, making them closely matched candidates. LM324KPWR is associated with 30 V operation and improved 2 kV ESD protection in the TI LM324K family. The best choice depends on exact offset, bias-current, temperature-grade, qualification, and lifecycle details in each manufacturer’s datasheet. Confirm those parameters rather than selecting solely from the matching amplifier count and bandwidth.
How should I design the PCB around LM324KPWR?
Place the LM324KPWR power bypass capacitor close to the shared supply pins, keep feedback and sensitive input traces short, and route all four channels to a low-impedance ground reference. The Texas Instruments manufacturer datasheet provides the recommended application circuit and electrical characteristics. Avoid placing long copper or component leads beside high-impedance input nodes, especially because the device’s input bias current can create offset errors. Confirm the TSSOP land pattern and pin-one orientation against the package drawing.
Is LM324KPWR compliant with RoHS and REACH?
The LM324KPWR’s RoHS and REACH status must be confirmed from the current Texas Instruments product or material-compliance documentation for the exact orderable MPN. Do not infer compliance solely because the device is a modern lead-free surface-mount part. When regulatory qualification is a purchasing requirement, request the applicable manufacturer compliance declaration during the quotation process and retain it with the project documentation.

Data referensi kejuruteraan untuk LM324KPWR — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM324KPWR when a design needs four general-purpose amplifier channels, a 1.2 MHz performance class, a 30 V maximum supply rating, and improved 2 kV ESD protection in a 14-pin TSSOP. It is well suited to low-frequency sensor conditioning, active filters, audio preamplification, control loops, and general interface circuits. LM324APWR is a strong same-manufacturer alternative when its exact qualification and electrical limits satisfy the design; LM324KAPW is another close family option. LM324PWRG3 provides another TI ordering path with matching package and amplifier class. ROHM Semiconductor’s LM324PWR or LM324PWRG3 can serve as cross-brand drop-in candidates when the complete pinout, temperature grade, offset voltage, bias current, and lifecycle status have been reviewed. For precision instrumentation, compare the family against lower-offset, lower-bias alternatives rather than selecting only by bandwidth and package. For high-speed or high-output-current applications, choose an amplifier with the required slew rate and load drive.

Perbandingan dengan Gantian

Parametr Produk Ini LM324APWR LM324KAPW LM324PWRG3 LM324PWR LM324PWRG3
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments ROHM Semiconductor ROHM Semiconductor
Package 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP 14-TSSOP-BJ 14-TSSOP-BJ
Amplifier Count 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Gain-Bandwidth Product 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz 1.2 MHz
Device Classification General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier

Penyeberangsung Jelas

  • Improved ESD protection within a compact quad package (vsLM324APWR)
  • Four general-purpose channels in one TSSOP (vsLM2902KNS)
  • Matched 1.2 MHz general-purpose performance class (vsLM324PWR)
  • Single-package channel consolidation (vsLM2902KNS)

Catatan Desain

Place the supply-bypass capacitor close to pins 4 and 11, and keep the high-impedance input traces at pins 2, 3, 5, 6, 9, 10, 12, and 13 short. Route feedback components directly to their associated amplifier pins so parasitic capacitance does not destabilize the closed-loop response. Use the manufacturer package drawing to confirm pin-one orientation and maintain the 14-pin TSSOP land pattern.

Do not treat the 30 V maximum supply rating as a recommended operating point. Verify minimum and maximum operating supply voltage, common-mode input range, output swing, output current, and slew rate for the selected gain and load. A four-amplifier package also multiplies total supply demand, so calculate the worst-case channel load and thermal condition before finalizing the power-supply design.

Keep sensor wiring and feedback nodes away from switching nodes, high-current return paths, and digital clock traces. If the source impedance is high, the amplifier input bias current can produce a DC error; use the manufacturer’s input-bias-current limit to estimate that error and add guarding or biasing where necessary. External ESD protection is still appropriate for externally accessible inputs despite the LM324K family’s improved 2 kV ESD rating.

Decouple each supply rail locally and use a supply regulator with adequate transient response for all four channels. Verify startup behavior, output saturation recovery, and load-drive margin rather than relying only on the 1.2 MHz gain-bandwidth product. If any channel can drive a capacitive load, check the recommended isolation resistance and load values in the manufacturer application guidance.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance status requires confirmation from the current manufacturer documentation for the exact LM324KPWR orderable part number.

Data disahkan pada: 2026-11-17 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

lm324 power requirements lm324 power supply lm324 performance specifications lm324 pwm lm324 performance characteristics LM324KPWR datasheet LM324KPWR pinout LM324KPWR equivalent LM324KPWR replacement LM324KPWR price LM324KPWR TSSOP-14 LM324KPWR vs LM324APWR

Komponen dan Tanda berkaitan

Texas Instruments LM324KPWR LM324K LM324APWR LM324KAPW LM324PWRG3 ROHM Semiconductor LM324PWR operational amplifier quad operational amplifier analog amplifier analog integrated circuit semiconductor general-purpose amplifier TSSOP-14 TSSOP family surface-mount package SMD 1.2 MHz gain-bandwidth product 30 V maximum supply voltage 2 kV ESD protection signal conditioning active filter sensor interface audio preamplification
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ