LM339APWR - Quad Differential Comparator | Texas Instruments
MPN: LM339APWR ✓ AktifLM339APWR Ringkasan
A comparator is an analog-to-digital decision element rather than an amplifier: it evaluates a voltage at its non-inverting input relative to its inverting input and changes its output state when the difference crosses a defined threshold. Within the power-management and signal-conditioning hierarchy, the LM339A belongs to the comparator family of integrated circuits. Its four channels can perform independent threshold decisions, while its open-collector outputs allow wired logic, pull-up-controlled buses, or interface to subsequent digital stages.
The principal features of the LM339APWR include four independent channels, low input offset voltage of 0.37 mV, low input bias current of 3.5 nA, and low supply-current consumption of 200 µA per comparator. Its common-mode input range includes ground, which is important for single-supply sensing systems. The 1 µs response time supports practical threshold and protection functions, while the 38 V maximum rating provides additional operating margin in industrial systems.
Each comparator uses an open-collector output structure, so the output includes a transistor capable of sinking current rather than actively driving a rail-to-rail logic voltage. A pull-up resistor is therefore required to establish the high output state. This architecture is useful when multiple devices must share a wired signal, but it also introduces rise-time behavior governed by the pull-up resistance and total bus capacitance.
Typical applications include industrial sensor conditioning, battery-powered monitoring, overvoltage and undervoltage detection, window-comparison circuits, and control systems with open-collector alarm outputs. The common-mode range including ground makes the device suitable for detecting small signals near 0 V, while the multi-channel configuration allows one package to implement several related thresholds.
Designers should account for input and output behavior near ground, select an appropriate pull-up resistor, and verify operation across supply tolerance, temperature, input overvoltage, and output leakage conditions. Review the Texas Instruments datasheet pin-description table before assigning PCB signals, especially because the exposed supply and output arrangement is specific to the quad TSSOP implementation.
This product page combines the manufacturer’s electrical and ordering information with practical design guidance, same-footprint replacement analysis, and application-oriented context. It is intended to help engineers identify whether the LM339APWR’s four-channel, open-collector architecture fits a comparator design before beginning PCB implementation or production sourcing.
Pilihan pengganti yang segera untuk LM339APWR — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LM339APWR (sama faktor bentuk dan kaki) — berbeza dalam Logic Compatibility, Comparator Type, Output Type, Package, Supply Voltage Range.
LM339BIPWR
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LM339APWR Penilaian maksimum & Ciri-ciri Elektrik
| Comparator Type | Quad differential comparator |
| Number of Channels | 4 channels |
| Supply Voltage Range | 2 V to 30 V |
| Maximum Rated Supply Voltage | 38 V |
| Differential Input Voltage Range | -38 V to +38 V |
| Common-Mode Input Voltage | Includes ground |
| Jenis Output | Open-collector |
| Input Offset Voltage | 0.37 mV |
| Input Bias Current | 3.5 nA |
| Arus Pemberi Arus | 200 µA per comparator |
| Response Time | 1 µs |
| Logic Compatibility | TTL, MOS, and CMOS compatible |
| Kemasan | 14-pin TSSOP |
| Jenis Pemasangan | Surface mount |
| Commercial Grade | Commercial temperature grade |
| ESD Rating | 2 kV HBM |
Panduan Konfigurasi Pin LM339APWR 14-pin tssop
Konfigurasi pin untuk LM339APWR (14-pin tssop pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.
Tiada data garisan pin yang diperoleh untuk LM339APWR.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LM339APWR patut untuk 6 aplikasis: Battery Voltage Threshold Detection, Industrial Sensor Interfacing, Overvoltage and Undervoltage Protection, Window Comparator Monitoring, Motor and Power-System Supervision, Smart Home and IoT Threshold Nodes.
Battery Voltage Threshold Detection
The LM339APWR is suitable for monitoring a battery or low-voltage rail with four independent comparator channels. Its common-mode input range includes ground, which helps evaluate signals near 0 V in single-supply systems, while the 2 V to 30 V operating range supports low-energy electronics. The 0.37 mV input offset and 3.5 nA bias current are useful when the monitored signal changes only slightly. Each open-collector output can assert an alarm or control signal after an external pull-up establishes its logic-high state.
Disebarkan
Industrial Sensor Interfacing
The LM339APWR can convert slowly changing sensor signals into discrete threshold events for industrial control equipment. Its four independent channels permit separate upper, lower, warning, or fault thresholds within one package, and the common-mode range including ground supports sensors referenced to 0 V. The 1 µs response time is generally suitable for slow sensor signals and supervisory functions. Open-collector outputs provide flexible interfacing to TTL, MOS, or CMOS logic when paired with suitable pull-up resistors.
Disebarkan
Overvoltage and Undervoltage Protection
The LM339APWR can implement independent overvoltage and undervoltage protection by comparing a scaled feedback voltage with precision references. A 38 V maximum rated supply and ±38 V differential input rating provide operating margin in industrial systems, although protection networks must keep actual pin voltages within their limits. The 0.37 mV input offset helps reduce threshold uncertainty in low-level protection circuits. Open-collector fault outputs can be pulled up, wired together, or connected to an isolation or shutdown circuit.
Disebarkan
Window Comparator Monitoring
The LM339APWR is well suited to a window-comparator arrangement in which two channels establish upper and lower limits around a measured voltage. The common-mode input range includes ground for single-supply sensing, and the 0.37 mV offset specification supports precise decisions near a reference voltage. The 1 µs response time provides quick fault detection for slowly varying process or supply signals. Because the outputs are open collector, pull-up components must be chosen to meet the required logic level and fault-line rise time.
Disebarkan
Motor and Power-System Supervision
The LM339APWR can supervise multiple rails or operating conditions in a motor-control or power-system design. Its 2 V to 30 V supply range, 38 V maximum rating, and common-mode operation down to ground make it appropriate for monitoring scaled system signals. The four-channel arrangement can track supply, driver, temperature-sensor, and enable conditions through separate comparator thresholds. Open-collector outputs are useful for wired fault signals, but the design must include pull-ups and verify logic-family compatibility.
Disebarkan
Smart Home and IoT Threshold Nodes
The LM339APWR can implement local threshold decisions for IoT sensor nodes, smart-home modules, and low-power condition-monitoring boards. Its low 200 µA supply current per comparator helps limit continuous operating current, while four channels reduce the component count for multiple decisions. The common-mode range including ground is useful for divider-based measurements from low-voltage sensors. Each open-collector output requires a pull-up, and its passive high level can be selected to match the connected MCU, display, or communications interface.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LM339APWR — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LM339BIPWR |
|---|---|---|
| Package | 14-pin TSSOP | 14-pin TSSOP |
| Brand | Texas Instruments | Texas Instruments |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 2 V to 30 V | 2 V to 30 V |
| Maximum Rated Supply Voltage | 38 V | 38 V |
| Input Offset Voltage | 0.37 mV | 0.37 mV |
| Input Bias Current | 3.5 nA | 3.5 nA |
| Supply Current | 200 µA per comparator | 200 µA per comparator |
| Response Time | 1 µs | 1 µs |
| Output Type | Open-collector | Open-collector |
| Common-Mode Input Voltage | Includes ground | Includes ground |
Penyeberangsung Jelas
- Four independent threshold channels in one package (vsLM339BIPWR)
- Open-collector output architecture (vsLM339BIPWR)
- Single-supply sensing near ground (vsLM339BIPWR)
Catatan Desain
Do not treat the open-collector output as a push-pull logic output. Each channel requires an external pull-up resistor, and the resistor must sink no more than the output transistor’s permitted current while still producing an acceptable rise time. Also observe the ±38 V differential input limit even when the supply voltage is lower, because an unexpected input transient can damage the input structures.
Place the pull-up resistor close to the comparator output and the decoupled supply connection close to the device power pin. Keep the input and reference traces short to reduce sensitivity to injected noise and switching edges. For high-impedance sensors, use guarded routing or a ground reference alongside the signal trace, and verify that source impedance does not create excessive offset error at the 3.5 nA input bias-current level.
The open-collector output can be used as a controlled current sink for an LED or relay path, but its operating limits must be respected. Check output saturation voltage at the actual load current, leakage at the maximum common-mode voltage, and the logic rise time produced by the pull-up and bus capacitance. A resistor that is unnecessarily small increases supply current and may overload the output transistor.
The LM339APWR is a low-power comparator, but total dissipation depends on supply voltage, channel activity, output pull-up current, and ambient temperature. Use the manufacturer’s electrical limits and package information when assessing thermal performance. In a four-channel design, estimate the aggregate current from all pull-ups and comparator bias currents rather than evaluating one output channel in isolation.
Maklumat Kesediaan
The device is identified as a commercial-grade quad comparator. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product information used for this page.