Texas Instruments

LM339APWR - Quad Differential Comparator | Texas Instruments

MPN: LM339APWR ✓ Active
2 V to 30 V Vdss 3.5 nA Id 14-pin TSSOP Package
MOQ: 1 |

LM339APWR Overview

The Texas Instruments LM339APWR is a quad differential comparator containing four independent open-collector comparator channels in a 14-pin TSSOP package. It supports single-supply or split-supply operation, accepts input common-mode voltages that include ground, and provides open-collector outputs compatible with TTL, MOS, and CMOS logic. Key ratings include a maximum rated supply of 38 V, differential input voltage of ±38 V, input offset voltage as low as 0.37 mV, input bias current of 3.5 nA, and response time of 1 µs.

A comparator is an analog-to-digital decision element rather than an amplifier: it evaluates a voltage at its non-inverting input relative to its inverting input and changes its output state when the difference crosses a defined threshold. Within the power-management and signal-conditioning hierarchy, the LM339A belongs to the comparator family of integrated circuits. Its four channels can perform independent threshold decisions, while its open-collector outputs allow wired logic, pull-up-controlled buses, or interface to subsequent digital stages.

The principal features of the LM339APWR include four independent channels, low input offset voltage of 0.37 mV, low input bias current of 3.5 nA, and low supply-current consumption of 200 µA per comparator. Its common-mode input range includes ground, which is important for single-supply sensing systems. The 1 µs response time supports practical threshold and protection functions, while the 38 V maximum rating provides additional operating margin in industrial systems.

Each comparator uses an open-collector output structure, so the output includes a transistor capable of sinking current rather than actively driving a rail-to-rail logic voltage. A pull-up resistor is therefore required to establish the high output state. This architecture is useful when multiple devices must share a wired signal, but it also introduces rise-time behavior governed by the pull-up resistance and total bus capacitance.

Typical applications include industrial sensor conditioning, battery-powered monitoring, overvoltage and undervoltage detection, window-comparison circuits, and control systems with open-collector alarm outputs. The common-mode range including ground makes the device suitable for detecting small signals near 0 V, while the multi-channel configuration allows one package to implement several related thresholds.

Designers should account for input and output behavior near ground, select an appropriate pull-up resistor, and verify operation across supply tolerance, temperature, input overvoltage, and output leakage conditions. Review the Texas Instruments datasheet pin-description table before assigning PCB signals, especially because the exposed supply and output arrangement is specific to the quad TSSOP implementation.

This product page combines the manufacturer’s electrical and ordering information with practical design guidance, same-footprint replacement analysis, and application-oriented context. It is intended to help engineers identify whether the LM339APWR’s four-channel, open-collector architecture fits a comparator design before beginning PCB implementation or production sourcing.

Drop-in alternatives for LM339APWR — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.

Variants in this series

Same-series models that are drop-in compatible with LM339APWR (same form factor and footprint) — differing in Logic Compatibility, Comparator Type, Output Type, Package, Supply Voltage Range.

Texas Instruments
Logic Compatibility: Compatible with TTL, MOS, and CMOS
Output Type: Open collector
Supply Voltage Range: 2 V to 36 V
Compare with LM339APWR →
Texas Instruments
Logic Compatibility: TTL, MOS, and CMOS
Output Type: Open collector
Supply Voltage Range: 2 V to 36 V
Compare with LM339APWR →
Texas Instruments
Logic Compatibility: Compatible with TTL, MOS, and CMOS
Comparator Type: General-purpose differential comparator
Output Type: Open collector
Compare with LM339APWR →

LM339BIPWR

✅ Drop-In
📦 14-pin TSSOP
B-version upgrade with the same 14-pin TSSOP footprint and 0% difference in the listed 38 V maximum rating; Texas Instruments identifies the B-version as a drop-in replacement for LM339A devices

📋 Reference alternative (not in catalog)

LM339APWR Maximum Ratings & Electrical Characteristics

Comparator Type Quad differential comparator
Number of Channels 4 channels
Supply Voltage Range 2 V to 30 V
Maximum Rated Supply Voltage 38 V
Differential Input Voltage Range -38 V to +38 V
Common-Mode Input Voltage Includes ground
Output Type Open-collector
Input Offset Voltage 0.37 mV
Input Bias Current 3.5 nA
Supply Current 200 µA per comparator
Response Time 1 µs
Logic Compatibility TTL, MOS, and CMOS compatible
Package 14-pin TSSOP
Mounting Type Surface mount
Commercial Grade Commercial temperature grade
ESD Rating 2 kV HBM

LM339APWR 14-pin tssop Pin Configuration Guide

Pin configuration for LM339APWR (14-pin tssop package). This analog component features input, output, and power supply pins. Refer to the manufacturer datasheet for offset null, compensation, and enable pin configurations. Ideal for signal conditioning and amplifier circuits.

14-pin tssop package pinout diagram for LM339APWR

No detailed pinout data available for LM339APWR.

Refer to the datasheet for full pin configuration.

Typical Applications

LM339APWR is suitable for 6 applications: Battery Voltage Threshold Detection, Industrial Sensor Interfacing, Overvoltage and Undervoltage Protection, Window Comparator Monitoring, Motor and Power-System Supervision, Smart Home and IoT Threshold Nodes.

⚡

Battery Voltage Threshold Detection

The LM339APWR is suitable for monitoring a battery or low-voltage rail with four independent comparator channels. Its common-mode input range includes ground, which helps evaluate signals near 0 V in single-supply systems, while the 2 V to 30 V operating range supports low-energy electronics. The 0.37 mV input offset and 3.5 nA bias current are useful when the monitored signal changes only slightly. Each open-collector output can assert an alarm or control signal after an external pull-up establishes its logic-high state.

🏭

Industrial Sensor Interfacing

The LM339APWR can convert slowly changing sensor signals into discrete threshold events for industrial control equipment. Its four independent channels permit separate upper, lower, warning, or fault thresholds within one package, and the common-mode range including ground supports sensors referenced to 0 V. The 1 µs response time is generally suitable for slow sensor signals and supervisory functions. Open-collector outputs provide flexible interfacing to TTL, MOS, or CMOS logic when paired with suitable pull-up resistors.

🔧

Overvoltage and Undervoltage Protection

The LM339APWR can implement independent overvoltage and undervoltage protection by comparing a scaled feedback voltage with precision references. A 38 V maximum rated supply and ±38 V differential input rating provide operating margin in industrial systems, although protection networks must keep actual pin voltages within their limits. The 0.37 mV input offset helps reduce threshold uncertainty in low-level protection circuits. Open-collector fault outputs can be pulled up, wired together, or connected to an isolation or shutdown circuit.

📊

Window Comparator Monitoring

The LM339APWR is well suited to a window-comparator arrangement in which two channels establish upper and lower limits around a measured voltage. The common-mode input range includes ground for single-supply sensing, and the 0.37 mV offset specification supports precise decisions near a reference voltage. The 1 µs response time provides quick fault detection for slowly varying process or supply signals. Because the outputs are open collector, pull-up components must be chosen to meet the required logic level and fault-line rise time.

⚙️

Motor and Power-System Supervision

The LM339APWR can supervise multiple rails or operating conditions in a motor-control or power-system design. Its 2 V to 30 V supply range, 38 V maximum rating, and common-mode operation down to ground make it appropriate for monitoring scaled system signals. The four-channel arrangement can track supply, driver, temperature-sensor, and enable conditions through separate comparator thresholds. Open-collector outputs are useful for wired fault signals, but the design must include pull-ups and verify logic-family compatibility.

🧩

Smart Home and IoT Threshold Nodes

The LM339APWR can implement local threshold decisions for IoT sensor nodes, smart-home modules, and low-power condition-monitoring boards. Its low 200 µA supply current per comparator helps limit continuous operating current, while four channels reduce the component count for multiple decisions. The common-mode range including ground is useful for divider-based measurements from low-voltage sensors. Each open-collector output requires a pull-up, and its passive high level can be selected to match the connected MCU, display, or communications interface.

Recommended Products Summary

LM339APWR Texas Instruments Used in: Battery Voltage Threshold Detection, Industrial Sensor Interfacing, Overvoltage and Undervoltage Protection, Window Comparator Monitoring, Motor and Power-System Supervision, Smart Home and IoT Threshold Nodes LM339BIPWR Same-family B-version upgrade Used in: Battery Voltage Threshold Detection, Industrial Sensor Interfacing, Overvoltage and Undervoltage Protection, Window Comparator Monitoring, Motor and Power-System Supervision, Smart Home and IoT Threshold Nodes
What is the operating voltage of LM339APWR?
The LM339APWR operates from a 2 V to 30 V supply, with a maximum rated supply voltage of 38 V. According to the Texas Instruments product and datasheet information, its common-mode input range includes ground, allowing the four comparators to sense signals near 0 V in single-supply systems. The ±38 V differential input rating applies to the input pair and should be checked against transient protection requirements.
What are the key specifications of LM339APWR that engineers should know?
The LM339APWR is a four-channel, open-collector differential comparator with a 1 µs response time, 0.37 mV input offset voltage, and 3.5 nA input bias current. According to the Texas Instruments product information, supply current is 200 µA per comparator, and the common-mode input voltage includes ground. The device is offered in a 14-pin TSSOP package for surface-mounted PCB designs.
Does LM339APWR need a pull-up resistor?
Yes, the LM339APWR requires an external pull-up resistor because all four outputs use an open-collector structure. According to the Texas Instruments datasheet, the output transistor sinks current when the comparator changes state, while the pull-up establishes the high logic level. Select the resistor using the required sink current, bus capacitance, propagation delay, and the logic family connected to the output.
Can LM339APWR compare signals close to ground?
Yes, the LM339APWR can compare input signals near ground because its common-mode input-voltage range includes ground. According to the Texas Instruments product information, this characteristic makes the device suitable for single-supply sensing systems such as battery monitoring, sensor thresholds, and low-voltage protection. Input offset and common-mode behavior must still be evaluated over the complete operating temperature range.
Where can I download the LM339APWR datasheet PDF?
The LM339APWR datasheet is available from the Texas Instruments LM339A product page and through the linked document-search result. The manufacturer page identifies the part as a commercial-grade precision quad differential comparator and provides ordering information. Use the pin-description and electrical-characteristics tables to confirm pin functions, limits, output behavior, and the recommended application circuit before layout.
Where can I find the LM339APWR pinout?
The LM339APWR pinout is documented in the pin-configuration and pin-description tables of the Texas Instruments LM339A datasheet. The device uses a 14-pin TSSOP outline with four differential comparator channels and open-collector outputs. Use the manufacturer’s package drawing when assigning nets and check the exposed-pad treatment, if applicable, against the specific ordering information for LM339APWR.
What is the best drop-in replacement for LM339APWR?
The LM339BIPWR is the closest documented same-package replacement because it is a 14-pin TSSOP version of the LM339 family and is identified as a B-version drop-in replacement for LM339A devices. According to the Texas Instruments product information, the B-version improves several specifications while retaining the same functional family. Validate temperature grade, offset limits, output behavior, and production requirements before substitution.
Can LM339BIPWR replace LM339APWR in an existing circuit?
The LM339BIPWR can serve as a same-package replacement for LM339APWR after application-level verification. Texas Instruments states that the LM339B is a drop-in replacement for LM239, LM339, and LM2901 A versions, and both listed devices use a 14-pin TSSOP package. The comparison data identifies a 1.3 µs response time for LM339PW-style listings, so confirm the exact propagation-delay requirement at the operating voltage.
LM339APWR vs LM339BIPWR – which is better for industrial threshold detection?
Choose the LM339BIPWR when the design benefits from the manufacturer’s improved B-version specifications and the exact operating requirements remain compatible. According to the Texas Instruments product information, the family supports a 38 V maximum rating, 0.37 mV low offset, 3.5 nA low bias current, 200 µA supply current per comparator, and a 1 µs response time. Choose LM339APWR when the A-version qualification and lifecycle records are already established internally.
LM339APWR vs LM339PW – what is the difference?
LM339APWR and LM339PW are both Texas Instruments quad open-collector comparators in 14-pin TSSOP packages, but their ordering suffixes and published performance details differ. The comparison listing reports 1.3 µs propagation delay and a 30 V maximum supply for LM339PW, while the LM339A family information identifies a 1 µs response time and a 38 V maximum rating for LM339APWR. Confirm the exact suffix and temperature grade before interchange.
When should I choose LM339APWR over LM339BIPWR?
Choose LM339APWR when an existing qualified design uses the A-version, its exact tested behavior is important, or the B-version’s changed characteristics have not been validated. Choose LM339BIPWR when you want the improved B-version family in the same 14-pin TSSOP format and can qualify its electrical behavior. According to Texas Instruments, the B-version is intended as a drop-in upgrade, but production substitution still requires application review.
Is LM339APWR suitable for battery-powered monitoring?
The LM339APWR is suitable for battery-powered monitoring when the design can operate within the 2 V to 30 V supply range and the monitored signal remains inside the common-mode and differential limits. According to the Texas Instruments product information, supply current is 200 µA per comparator and the common-mode input range includes ground. Use the output pull-up value to control standby power as well as switching behavior.
What can replace LM339APWR?
The strongest documented replacement is the LM339BIPWR, which uses the same 14-pin TSSOP package and belongs to the manufacturer’s B-version LM339 family. Texas Instruments identifies the B-version as a drop-in replacement for the original A-version family and reports improved specifications. Other manufacturers offer LM339-family comparators, but an exact same-package pin-compatible part must be confirmed before production use.
What is the best cross-brand equivalent for LM339APWR?
The best cross-brand equivalent must provide four open-collector comparator channels in a 14-pin TSSOP package with compatible input, supply, output, and timing characteristics. The Texas Instruments datasheet identifies the required interface as open-collector outputs compatible with TTL, MOS, and CMOS logic. Because equivalent-family pages do not establish an exact suffix and pin-compatible TSSOP variant here, no cross-brand MPN is presented as a production drop-in without that verification.
Where to buy LM339APWR online and what is its lead time?
Use the Request a Quote form on this page to request LM339APWR availability, current lead time, minimum order quantity, and shipment options. The part is identified as a Texas Instruments commercial-grade LM339A device in a 14-pin TSSOP package. Quotation requests are the appropriate way to establish current supply status because inventory and lead time can change independently of the technical product record.

Engineering reference data for LM339APWR — comparison, design guidance, and compliance information.

Selection Guide

Choose LM339APWR for industrial, consumer, or low-voltage monitoring designs that require four independent open-collector comparators in a 14-pin TSSOP package. Its common-mode input range includes ground, the 0.37 mV offset rating supports precise threshold decisions, and the 1 µs response time covers common supervision and protection functions. Choose LM339BIPWR when you want the manufacturer’s B-version improvements in the same footprint, but review its electrical characteristics and qualification requirements before changing a released design. Cross-brand LM339-family devices require exact suffix, package, pinout, timing, and input-limit verification; an equivalent device name alone is not sufficient. The decision should also account for open-collector pull-up requirements, allowable output current, logic-family compatibility, operating-temperature range, and production availability.

Comparison with Alternatives

Parameter This Product LM339BIPWR
Package 14-pin TSSOP 14-pin TSSOP
Brand Texas Instruments Texas Instruments
Comparator Type Quad differential comparator Quad differential comparator
Number of Channels 4 channels 4 channels
Supply Voltage Range 2 V to 30 V 2 V to 30 V
Maximum Rated Supply Voltage 38 V 38 V
Input Offset Voltage 0.37 mV 0.37 mV
Input Bias Current 3.5 nA 3.5 nA
Supply Current 200 µA per comparator 200 µA per comparator
Response Time 1 µs 1 µs
Output Type Open-collector Open-collector
Common-Mode Input Voltage Includes ground Includes ground

Key Differentiators

  • Four independent threshold channels in one package (vs LM339BIPWR)
  • Open-collector output architecture (vs LM339BIPWR)
  • Single-supply sensing near ground (vs LM339BIPWR)

Design Notes

Do not treat the open-collector output as a push-pull logic output. Each channel requires an external pull-up resistor, and the resistor must sink no more than the output transistor’s permitted current while still producing an acceptable rise time. Also observe the ±38 V differential input limit even when the supply voltage is lower, because an unexpected input transient can damage the input structures.

Place the pull-up resistor close to the comparator output and the decoupled supply connection close to the device power pin. Keep the input and reference traces short to reduce sensitivity to injected noise and switching edges. For high-impedance sensors, use guarded routing or a ground reference alongside the signal trace, and verify that source impedance does not create excessive offset error at the 3.5 nA input bias-current level.

The open-collector output can be used as a controlled current sink for an LED or relay path, but its operating limits must be respected. Check output saturation voltage at the actual load current, leakage at the maximum common-mode voltage, and the logic rise time produced by the pull-up and bus capacitance. A resistor that is unnecessarily small increases supply current and may overload the output transistor.

The LM339APWR is a low-power comparator, but total dissipation depends on supply voltage, channel activity, output pull-up current, and ambient temperature. Use the manufacturer’s electrical limits and package information when assessing thermal performance. In a four-channel design, estimate the aggregate current from all pull-ups and comparator bias currents rather than evaluating one output channel in isolation.

Compliance Information

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Lead Free
Unknown
Halogen Free
Unknown
Conflict Minerals
Unknown

The device is identified as a commercial-grade quad comparator. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated in the product information used for this page.

Related Searches

LM339APWR datasheet LM339APWR pinout LM339APWR datasheet pdf LM339APWR equivalent LM339APWR replacement LM339APWR cross reference LM339APWR vs LM339BIPWR LM339APWR price LM339APWR stock Texas Instruments LM339APWR LM339APWR TSSOP footprint LM339APWR application circuit

Related Components & Terms

Texas Instruments LM339APWR LM339A LM339BIPWR quad differential comparator comparator IC analog comparator logic IC semiconductor open-collector output common-mode input voltage differential input voltage input offset voltage input bias current supply current response time 14-pin TSSOP TSSOP family surface-mount package single-supply operation split-supply operation TTL compatibility MOS compatibility CMOS compatibility
Quick Quote RFQ
Fill in complete details — our sales team will respond within 24 hours
Part Number Manufacturer Package QTY Target Price Extended
✓
Quote submitted!

We will respond to your email within 24 hours

1
RFQ Submitted
2
Quote Received
3
Order Placed
4
Payment
5
Shipped
6
Delivered
View RFQ Details