onsemi

LM358ADR2GH - Dual 3-32V Op Amp | onsemi | Industrial

MPN: LM358ADR2GH ✓ Aktif
3 V to 32 V Vdss 8-SOIC Package
MOQ: 1 |

LM358ADR2GH Ringkasan

onsemi LM358ADR2GH is a dual general-purpose operational amplifier with two amplifier circuits, a 3 V to 32 V supply range, and an 8-SOIC surface-mount package. The H suffix identifies the tape-and-reel packaging format associated with this onsemi orderable designation, supporting automated surface-mount assembly and standard pick-and-place workflows.

A general-purpose operational amplifier is a voltage-controlled amplifier that uses external feedback to amplify voltage differences. LM358-type devices belong to the operational-amplifier hierarchy, combining differential input, high open-loop gain, output-current capability, and common-mode input operation. The onsemi LM358 family is widely used in instrumentation, buffer-amplifier, sensor-conditioning, and general feedback-control circuits where a dual amplifier provides more functionality than a single-channel device in the same package.

The LM358ADR2GH provides two amplifier circuits, operates from 3 V to 32 V, and is identified as a commercial-temperature dual improved input-offset-voltage amplifier. Its listed slew rate is 0.6 V/us, while its gain-bandwidth product is not stated in the available product information. The device also supports single-supply or split-supply operation and has a common-mode input-voltage range extending to ground or VEE, allowing useful operation in circuits powered from a single positive rail.

The 8-SOIC package has a stated body width of 3.90 mm, equivalent to 0.154 inch. Its dual-amplifier arrangement is useful when a circuit requires matched functional channels for signal conditioning, filtering, differential sensing, or feedback control. Because the operating and electrical limits vary with supply voltage, load, temperature, and configuration, designers should evaluate input common-mode range, output swing, stability, output-current capability, and offset behavior against their specific operating point before finalizing the circuit.

Typical applications include current sensing in industrial instrumentation, buffering sensor outputs, amplifying low-level control signals, active analog filters, and general-purpose feedback-control loops. In single-supply systems, the ground-referenced common-mode capability can simplify signal conditioning around sensors whose output remains near the lower supply rail. In split-supply systems, both amplifier channels can process bipolar signals around the midpoint of the supply.

PCB implementation should follow the manufacturer pin-description table and use a short, low-impedance feedback path. Place input, output, and compensation components close to the appropriate device pins, maintain a stable ground reference, and avoid long traces near switching nodes. Check the external feedback network for acceptable bandwidth and noise performance, and verify the chosen bypass capacitors against the application’s supply ripple and transient requirements.

This product page combines the exact orderable designation, verified listing attributes, practical op-amp design guidance, and clearly scoped replacement information. The accompanying comparisons emphasize the engineering checks required for an eight-pin SOIC footprint: rail-to-rail compatibility cannot be assumed from the LM358 name alone, and load current, common-mode range, slew rate, offset voltage, bandwidth, and temperature grade should be reviewed before approving a substitution.

Pilihan pengganti yang segera untuk LM358ADR2GH — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

SGMI8358

✅ Masuk Drop-In
📦 8-SOIC
The verified electrical rating difference is 0% for the shared LM358 pinout and SOIC-8 footprint; offset voltage, bandwidth, common-mode range, and temperature limits still require comparison

📋 Alternatif rujukan (tidak dalam katalog)

TP358

✅ Masuk Drop-In
📦 8-SOIC
The verified electrical rating difference is 0% for the shared LM358 pinout and SOIC-8 footprint; output swing, load current, slew rate, and temperature range require comparison

📋 Alternatif rujukan (tidak dalam katalog)

BP358

✅ Masuk Drop-In
📦 8-SOIC
The verified electrical rating difference is 0% for the shared LM358 pinout and SOIC-8 footprint; input offset, noise, bandwidth, and common-mode limits require comparison

📋 Alternatif rujukan (tidak dalam katalog)

NSMOP-358

✅ Masuk Drop-In
📦 8-SOIC
The verified electrical rating difference is 0% for the shared LM358 pinout and SOIC-8 footprint; supply current, output current, slew rate, and operating-temperature grade require comparison

📋 Alternatif rujukan (tidak dalam katalog)

LM358ADR2GH Penilaian maksimum & Ciri-ciri Elektrik

Amplifier Type General Purpose
Number of Amplifier Circuits 2 circuits
Supply Voltage Range 3 V to 32 V
Kemasan 8-SOIC
Package Body Width 3.90 mm (0.154 inch)
Jenis Pemasangan Surface Mount
Slew Rate 0.6 V/us
Operating Temperature Grade Commercial
Common-Mode Input Voltage Range Extends to ground/VEE
Supply Configuration Single supply or split supply

Panduan Konfigurasi Pin LM358ADR2GH 3.90 mm (0.154 inch)

Konfigurasi pin untuk LM358ADR2GH (3.90 mm (0.154 inch) pakai). Komponen analog ini mempunyai pin masukan, keluaran, dan kuasa. Rujuk dokumen pengeluar untuk konfigurasi pengecualian, pemulihan, dan pin aktifkan. Ideal untuk pengawasan isyarat dan litar pengukur.

Garis bentuk pengecah pakai 3.90 mm (0.154 inch) untuk LM358ADR2GH

Tiada data garisan pin yang diperoleh untuk LM358ADR2GH.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LM358ADR2GH patut untuk 6 aplikasis: Industrial Current Sensing, Sensor Signal Buffering, Active Analog Filtering, Power Supply Feedback Control, Audio and Communication Interface Conditioning, General-Purpose Feedback Control.

🏭

Industrial Current Sensing

The LM358ADR2GH is well suited to amplifying the small voltage produced by a current-sense shunt in industrial instrumentation. Its two amplifier channels can provide signal amplification and a buffered reference or auxiliary channel, while the 3 V to 32 V operating range supports both compact sensor nodes and higher-voltage control systems. The 0.6 V/us slew rate helps preserve signal shape, and the common-mode input range extending to ground or VEE supports single-supply sensing arrangements. For a new design, verify the selected sense-resistor magnitude, shunt common-mode voltage, amplifier input range, output swing, and offset error against the target measurement resolution.

📡

Sensor Signal Buffering

The LM358ADR2GH can buffer high-impedance sensor outputs before they drive an ADC or downstream instrumentation stage. Two channels provide flexible use for a noninverting buffer and a gain or filter section, while the 8-SOIC package keeps the circuit compact. Common-mode input operation extending to ground or VEE is useful when sensing voltages near the lower rail of a single-supply system. Confirm that the sensor’s output range remains inside the amplifier’s common-mode limits and that capacitive loading at the buffered output will not cause instability. Add input bias compensation when source impedance is high or output-offset drift is critical.

🎛️

Active Analog Filtering

The two LM358ADR2GH amplifier channels can implement first-order or cascaded analog filters when a low-frequency signal must be conditioned before digitization. Its listed 0.6 V/us slew rate and general-purpose architecture are appropriate for many instrumentation and control-bandwidth applications, and the 3 V to 32 V supply range allows the filter to share a broad range of system rails. The gain-bandwidth product and stability limits must be obtained from the manufacturer datasheet before setting closed-loop gain and capacitor values. Keep the feedback loop compact, use stable resistor and capacitor selections, and validate phase margin using the final source and load impedances.

⚡

Power Supply Feedback Control

The LM358ADR2GH can be used in feedback-control loops for regulated laboratory, industrial, or communications power systems. Its two channels permit error amplification and an auxiliary comparison or buffer function, while the 3 V to 32 V operating range covers many control-board supply environments. A 0.6 V/us slew rate can be appropriate for moderate loop bandwidth, but compensation and stability depend on the power-stage topology, crossover frequency, and output impedance. Verify the allowed input and output excursions during startup and fault conditions, and ensure the amplifier does not saturate as the controlled rail changes.

🎧

Audio and Communication Interface Conditioning

The LM358ADR2GH is appropriate for low-frequency audio and communication interface conditioning when rail-to-rail input operation is unnecessary. Two channels can support gain, attenuation, or active-filter stages around low-level signals, and the ground-referenced common-mode capability can simplify single-supply interfacing. Its 0.6 V/us slew rate provides margin for many low-bandwidth paths but may be insufficient for high-frequency audio or communication signals. Set the feedback network according to the manufacturer’s stability guidance, check distortion and output-current requirements, and keep sensitive input routing away from switching nodes and high-current return paths.

🔧

General-Purpose Feedback Control

The LM358ADR2GH can amplify error signals in basic proportional control loops for valves, heaters, positioning systems, and laboratory mechanisms. Two channels allow an error amplifier to work alongside a buffer, reference follower, or auxiliary conditioning stage, and the 3 V to 32 V supply range supports many industrial control boards. The commercial-temperature grade should be checked against the ambient range of the final system. For stable operation, derive compensation from the actuator and plant dynamics, include output limiting, and verify the output swing and load current against the controlled load before deployment.

What are the key specifications of LM358ADR2GH that engineers should know?
The LM358ADR2GH is a dual general-purpose operational amplifier rated for 3 V to 32 V operation in an 8-SOIC package. According to the onsemi LM358ADR2G datasheet, it provides two amplifier circuits, supports single or split supplies, and permits common-mode input operation extending to ground or VEE. Its listed slew rate is 0.6 V/us, while the commercial-temperature designation identifies the intended operating grade. The orderable H suffix denotes tape-and-reel packaging for automated assembly.
What is the operating voltage of LM358ADR2GH?
The LM358ADR2GH operates from 3 V to 32 V, as specified in the onsemi LM358ADR2G product listing and datasheet. This wide supply range allows the same dual-amplifier device to be used in low-voltage single-supply systems and higher-voltage industrial control circuits. Actual signal range remains limited by the selected operating point, so input common-mode voltage and output swing must remain within the limits shown in the manufacturer datasheet.
Where can I download the LM358ADR2GH datasheet PDF?
The LM358ADR2GH datasheet can be obtained through the linked onsemi LM358ADR2G documentation on the manufacturer-oriented data sheet page. The document describes the dual operational amplifier, common-mode input range extending to ground or VEE, and support for single-supply or split-supply operation. The H suffix is a packaging code associated with LM358ADR2G, so engineers should use the LM358ADR2G datasheet pin and electrical tables while confirming their exact orderable code.
Where can I find the LM358ADR2GH pinout?
Use the manufacturer pin-description table in the LM358ADR2G datasheet to assign LM358ADR2GH PCB connections. The device is an 8-SOIC package, and the H suffix changes the delivery format rather than the amplifier architecture. Because the complete numbered pin list is not stated in the product listing, use the package drawing and pin-description table together to verify each input, output, supply, and ground connection before fabrication.
Is LM358ADR2GH the same as LM358ADR2G?
LM358ADR2GH and LM358ADR2G identify the same onsemi LM358ADR2G device in different orderable packaging contexts, with the H suffix associated with tape-and-reel delivery. Their amplifier architecture and electrical function remain the same: two general-purpose operational amplifiers in an 8-SOIC package with a 3 V to 32 V supply range. Buyers should still verify the manufacturer ordering table to confirm that the suffix, shipment form, and quantity increments match their assembly process.
What can replace LM358ADR2GH?
Possible eight-pin SOIC replacements include SGMI8358, TP358, BP358, and NSMOP-358, because published cross-reference information identifies these devices as LM358-compatible alternatives with matching SOIC-8 dimensions and pinouts. They should not be treated as unconditional replacements. Review input offset voltage, common-mode range, output swing, load current, bandwidth, slew rate, supply limits, noise, and temperature grade in the candidate’s manufacturer documentation before approving a substitution.
Is SGMI8358 a drop-in replacement for LM358ADR2GH?
SGMI8358 is a candidate drop-in replacement for LM358ADR2GH when the circuit uses the standard eight-pin LM358 pinout and stays within the replacement’s electrical limits. Cross-reference information identifies matching DIP-8 and SOIC-8 package dimensions and pin compatibility. Pin compatibility alone does not guarantee equivalent performance, so confirm rail-to-rail input behavior, output-current capability, offset voltage, bandwidth, slew rate, and operating temperature against the original design requirements.
What is the best onsemi equivalent for LM358ADR2GH?
The closest onsemi ordering form is LM358ADR2G because it denotes the same dual general-purpose operational amplifier in the 8-SOIC package; LM358ADR2GH adds the H packaging suffix for tape-and-reel handling. This is an order-form change rather than a different circuit. Confirm the ordering code, reel quantity, moisture-protection requirements, and production quantities with onsemi before substituting it into a bill of materials.
LM358ADR2GH vs TP358: which is better for a 5 V sensor signal?
TP358 may suit the standard LM358 pinout and SOIC-8 footprint, but the better choice depends on its complete electrical ratings at 5 V. Compare the onsemi LM358ADR2GH and TP358 documentation for common-mode input range, output swing, output current, offset voltage, gain-bandwidth product, slew rate, noise, and stability with the selected feedback network. A nominal 0.6 V/us slew rate is listed for LM358ADR2G, while corresponding TP358 limits must be checked directly.
When should I choose LM358ADR2GH over another dual op amp?
Choose LM358ADR2GH when the circuit needs two general-purpose amplifier channels, operation across a 3 V to 32 V supply range, and an established 8-SOIC footprint. It is particularly suitable for industrial instrumentation, buffering, active filtering, and feedback-control circuits that do not require precision rail-to-rail inputs. Select an alternative only when its documented common-mode range, output swing, bandwidth, offset, noise, and load capability better satisfy the application.
Is LM358ADR2GH suitable for industrial control and instrumentation?
The LM358ADR2GH is suitable for many industrial control and instrumentation signal-conditioning applications because it combines two channels, a 3 V to 32 V operating range, and common-mode input capability extending to ground or VEE. It is identified as a commercial-temperature part. For installations with extended ambient temperature, high noise immunity, or safety requirements, verify the environmental specification and consider an appropriately qualified amplifier rather than assuming the commercial grade covers every industrial condition.
What is the lead time and stock status of LM358ADR2GH?
Current stock and lead-time status for LM358ADR2GH should be confirmed through the Request a Quote form on this page. The onsemi LM358ADR2G family is shown in distributor listings, including a tape-and-reel listing for the target designation, but a listing alone does not guarantee current inventory, allocation, or delivery timing. State the required quantity, reel format, and target date when requesting the quote so procurement can confirm the exact orderable configuration.
Where can I buy LM358ADR2GH online at the current price?
Use the Request a Quote form on this page to request the current LM358ADR2GH price, stock position, lead time, and shipment quantity. The verified product listings cover the onsemi LM358ADR2G family and the LM358ADR2GH tape-and-reel designation, but static pricing can change with inventory, quantity, and order breaks. The quote form allows procurement to obtain a current response for the exact 8-SOIC tape-and-reel configuration without relying on an outdated listing.
How should LM358ADR2GH be connected in a single-supply circuit?
Connect the positive amplifier supply to the 3 V to 32 V rail and the negative supply to ground for a single-supply circuit, while keeping each amplifier’s inverting and non-inverting inputs inside the allowed common-mode region. The onsemi LM358ADR2G datasheet notes that common-mode input operation extends to ground or VEE. Use the manufacturer pin table for the exact channel assignments and include suitable bypassing and feedback components around the SOIC-8 device.
Does LM358ADR2GH require a heatsink in industrial designs?
The LM358ADR2GH generally does not require a dedicated heatsink in conventional low-power signal-conditioning circuits, but thermal requirements depend on supply voltage, load current, ambient temperature, and PCB copper. Check the manufacturer’s output-current and thermal limits rather than estimating from generic LM358 family claims. Keep copper around the device, minimize resistance in supply and ground paths, and derate the design when the operating temperature or dissipation is high.
What compliance documents apply to LM358ADR2GH?
Compliance status for LM358ADR2GH should be confirmed from the current onsemi product and material declaration documentation. The product listing identifies the commercial-temperature 8-SOIC device and its 3 V to 32 V range, but it does not provide RoHS, REACH, AEC-Q100, halogen-free, lead-free, or conflict-minerals statements. Those fields are therefore left unknown rather than inferred. Request the relevant declarations for the exact orderable code when compliance is a purchasing requirement.

Data referensi kejuruteraan untuk LM358ADR2GH — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LM358ADR2GH when the board needs two general-purpose amplifier channels, a documented 3 V to 32 V supply range, common-mode input operation extending to ground or VEE, and an 8-SOIC footprint. It is a practical choice for industrial instrumentation, current-sense amplification, sensor buffering, active filtering, and moderate-bandwidth feedback control where rail-to-rail input operation is not required. SGMI8358, TP358, BP358, and NSMOP-358 are possible footprint-compatible alternatives, but each should be approved only after comparing offset voltage, common-mode limits, output swing, bandwidth, slew rate, noise, output current, and temperature grade. For automotive production, extended-temperature environments, low-offset precision measurements, capacitive loads, or very low-noise applications, select a device explicitly qualified and specified for those conditions rather than relying only on LM358 family compatibility.

Perbandingan dengan Gantian

Parametr Produk Ini SGMI8358 TP358 BP358 NSMOP-358
Brand onsemi SGMC (Sagna Microelectronics) 3PEAK 3PEAK NSC (Natron Semiconductor)
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Channels 2 2 2 2 2

Penyeberangsung Jelas

  • Wide supply operating range (vsSGMI8358)
  • Commercial-temperature dual general-purpose positioning (vsTP358)
  • Established onsemi orderable family (vsBP358)
  • Two amplifier channels in one 8-SOIC package (vsNSMOP-358)

Catatan Desain

Route each amplifier channel as a compact analog signal path. Place feedback resistors and compensation capacitors directly beside their associated pins, keep non-inverting input traces short, and provide a low-impedance ground plane beneath the SOIC-8 footprint. Separate the analog signal path from switching-node and high-current supply traces. This is particularly important because a long feedback route can add phase delay and create stability problems that are not apparent from nominal gain-bandwidth figures alone.

The device accepts a 3 V to 32 V supply, but that range does not imply that every input and output combination is valid at every supply voltage. Check the common-mode input region, output swing, and output-current limit at the lowest and highest intended supply voltages. Add local supply bypassing with short ground returns, and verify the source impedance seen by each amplifier during startup. Also account for input overvoltage during power sequencing or fault conditions.

Do not assume that every LM358-compatible amplifier is interchangeable solely because its package and pinout match. A replacement can differ in input offset, common-mode range, output swing, bandwidth, slew rate, noise, load capability, shutdown behavior, and temperature grade. Compare those limits with the actual circuit, especially when driving capacitive loads, operating near the input range boundary, or requiring the full 3 V to 32 V supply range.

The 8-SOIC package provides a practical thermal path, but the allowable dissipation still depends on supply voltage, output swing, load current, ambient temperature, and board copper. Reduce dissipation by minimizing the voltage drop across the output stage and avoiding sustained operation near the output-current limit where possible. Place the device near adequate ground-plane area and avoid placing it beside a heat source or in an enclosure with restricted airflow.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The verified product listings identify the onsemi LM358ADR2GH family and commercial operating grade but do not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

Data disahkan pada: 2026-11-09 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LM358ADR2GH datasheet LM358ADR2GH pdf LM358ADR2GH price LM358ADR2G datasheet LM358ADR2G op amp LM358ADR2G pinout LM358ADR2G circuit LM358ADR2G schematic LM358ADR2G equivalent LM358ADR2GH equivalent onsemi LM358ADR2GH LM358ADR2GH SOIC-8 replacement LM358ADR2GH industrial instrumentation

Komponen dan Tanda berkaitan

onsemi LM358ADR2GH LM358ADR2G SGMI8358 TP358 BP358 NSMOP-358 dual operational amplifier general-purpose operational amplifier voltage amplifier analog signal conditioning integrated circuit semiconductor 8-SOIC SOIC family surface-mount package SMD single-supply operation split-supply operation common-mode input voltage slew rate gain-bandwidth product industrial instrumentation current sensing sensor buffering
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ