LM358AMX - Dual 3-32V Op Amp in 8-SOIC | onsemi
MPN: LM358AMX ✓ AktifLM358AMX Ringkasan
An operational amplifier, or op amp, is a high-gain differential amplifier whose closed-loop behavior is determined mainly by external feedback components. The LM358 belongs to the dual-operational-amplifier hierarchy, which sits within analog ICs and the broader semiconductor category. Its two channels can amplify separate signals or work together in differential, summing, comparator-style, and current-feedback configurations.
The principal characteristics of the LM358AMX include internal frequency compensation for unity-gain operation, two amplifier circuits in one package, and operation from a single positive supply of 3 V to 32 V. The 100 dB large-signal voltage gain supports accurate closed-loop amplification when paired with conventional resistor networks. A minimum 65 dB common-mode rejection ratio helps reduce common-mode input signals when the input waveform contains large DC or externally coupled noise components.
The internally compensated architecture simplifies the implementation of unity-gain voltage followers and standard inverting or non-inverting gain stages. Although the amplifier operates from a single positive supply, its input common-mode range does not extend fully to the negative rail. Designers should also account for input offset voltage, output-current capability, supply-voltage headroom, and the finite output-voltage swing when setting resistor values and signal ranges.
Typical uses include industrial sensor interfaces, low-voltage control loops, audio preamplifier stages, current-monitoring circuits, and general instrumentation. In a sensor interface, the amplifier can convert a small transducer signal into a voltage referenced to ground. In a power-control application, it can amplify an error signal before driving a transistor or power stage, provided the feedback network maintains stable closed-loop operation.
For a new design, begin by confirming the required input and output voltage ranges against the operating supply. Place the bypass capacitor close to the supply pin, keep feedback traces short, and avoid long paths adjacent to switching nodes. The SOIC outline allows the same footprint to be considered for compatible dual general-purpose amplifier options, but electrical behavior and supply limits should be checked before substitution.
This product record combines the exact LM358AMX package identity, channel and supply characteristics, cross-reference options, and practical PCB guidance with a parameter-by-parameter comparison. It is designed to accelerate component selection for analog signal-conditioning and control designs while keeping replacement decisions traceable to manufacturer and distributor documentation.
Pilihan pengganti yang segera untuk LM358AMX — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LM358AMX (sama faktor bentuk dan kaki) — berbeza dalam Package, Amplifier Type, Input Offset Voltage, Slew Rate, Number of Circuits.
LM358DR
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LM358DG
✅ Masuk Drop-In ⚠️ Spesifikasi Tidak DisahkanHubungi untuk harga
Lihat Datasheet →LM358AMX/NOPB
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM358DR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM358ADR2G
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM358AMX Penilaian maksimum & Ciri-ciri Elektrik
| Number of Channels | 2 channels |
| Product Type | Standard general-purpose operational amplifier |
| Power Supply Range | 3 V to 32 V |
| Common-Mode Rejection Ratio | 65 dB minimum |
| Input Offset Voltage | 3 mV |
| Large-Signal Voltage Gain | 100 dB |
| Frequency Compensation | Internally compensated for unity gain |
| Kemasan | 8-SOIC |
| Jenis Pemasangan | Surface mount |
| Bilangan Pin | 8 pins |
Konfigurasi Pin LM358AMX
| Pin 1 | OUT1 — Amplifier 1 output |
| Pin 2 | IN1- — Amplifier 1 inverting input |
| Pin 3 | IN1+ — Amplifier 1 non-inverting input |
| Pin 4 | GND — Ground connection |
| Pin 5 | IN2+ — Amplifier 2 non-inverting input |
| Pin 6 | IN2- — Amplifier 2 inverting input |
| Pin 7 | OUT2 — Amplifier 2 output |
| Pin 8 | V+ — Positive power-supply connection |
Aplikasi Biasa
LM358AMX patut untuk 6 aplikasis: Industrial Sensor Signal Conditioning, Power-Supply Feedback Control, Audio Preamplifier Stage, Current Monitoring and Control, Instrumentation and Active Filtering, Portable and Battery-Powered Electronics.
Industrial Sensor Signal Conditioning
The LM358AMX is suitable for conditioning low-level sensor signals in industrial equipment because its two channels can provide gain and active filtering within one 8-SOIC package. Its 3 V to 32 V supply range supports both compact embedded systems and higher-voltage industrial rails, while the documented 100 dB large-signal gain supports closed-loop amplification with external resistor ratios. The 3 mV input offset must be included in total measurement error, and the selected input common-mode voltage must remain inside the amplifier's operating range. For slow-changing thermistor or potentiometer signals, the second channel can form a low-pass filter or buffer a reference node.
Disebarkan
Power-Supply Feedback Control
LM358AMX can amplify the error voltage produced by a feedback divider and support closed-loop control of a power-conversion stage. The internal unity-gain compensation simplifies a voltage-follower-based control architecture, and the 3 V to 32 V operating range accommodates both low-voltage digital supplies and higher industrial input buses. In this application, output-current capability and slew rate are as important as voltage gain, so those values must be checked against the compensation network and power-stage drive requirements. Keep the feedback divider close to the amplifier and separate it from switching-node copper to avoid adding high-frequency noise to the control loop.
Disebarkan
Audio Preamplifier Stage
The LM358AMX can provide voltage gain and impedance conversion in a low-cost audio preamplifier built around a single positive supply. Its internally compensated amplifier channels are useful for non-inverting and inverting stages, while the dual arrangement allows one channel to amplify the program signal and the other to provide gain or buffering. The 100 dB large-signal voltage gain supports accurate resistor-defined gain, and the 3 V to 32 V supply range accommodates portable and fixed installations. Audio-band performance, output swing, noise, and stability with the selected source impedance should be evaluated before using the device in a high-fidelity signal path.
Disebarkan
Current Monitoring and Control
LM358AMX is appropriate for amplifying the voltage produced by a current-sense element when the design also needs a single-supply amplifier with two available channels. One channel can amplify the sense voltage, while the second can buffer the reference or implement gain compensation around a downstream converter. The documented 65 dB minimum common-mode rejection ratio helps reject common-mode disturbance present on the sense signal, and the 3 mV offset defines an important baseline for error calculations. Confirm that the monitored current and amplifier input produce voltages that remain within the common-mode and output-swing limits throughout the operating range.
Disebarkan
Instrumentation and Active Filtering
The LM358AMX can implement basic instrumentation and active-filter functions where low component count and a single positive supply are priorities. Two independent channels allow a signal to be amplified and then filtered, or two sensors can be conditioned in one package. Its 100 dB large-signal gain provides headroom for resistor-defined closed-loop stages, and internal frequency compensation supports unity-gain buffer configurations. Precision measurements should include the 3 mV input offset in the error budget and verify that the common-mode input range accommodates sensor outputs. For high-accuracy or low-drift requirements, a precision amplifier family may provide a better fit.
Disebarkan
Portable and Battery-Powered Electronics
LM358AMX is usable in portable and battery-powered electronics when the operating rail remains within its 3 V to 32 V capability and the circuit does not require rail-to-rail inputs. Two channels reduce the number of amplifier packages needed for a gain stage plus buffer, which can simplify board partitioning in compact products. The SOIC-8 package supports conventional surface-mount assembly, and the internally compensated architecture avoids an external unity-gain compensation capacitor. Battery designs should nevertheless evaluate supply-current consumption, dropout behavior, input common-mode headroom, and output swing during battery discharge because these depend on the selected grade and operating conditions.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LM358AMX — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LM358DR | LM358DG | LM358AMX/NOPB | LM358DR | LM358ADR |
|---|---|---|---|---|---|---|
| Brand | onsemi | onsemi | onsemi | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Number of Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Product Classification | Standard general-purpose amplifier | General-purpose dual operational amplifier | General-purpose dual operational amplifier | Standard general-purpose amplifier | LM358 family dual operational amplifier | LM358 family dual operational amplifier |
Penyeberangsung Jelas
- Direct dual-amplifier ordering identity (vsLM358AMX/NOPB)
- Single-supply operating range (vsLM358DR)
- Established general-purpose amplification characteristics (vsLM358ADR)
Catatan Desain
Place the supply-bypass capacitor directly between pins 8 and 4, with the ground connection using the shortest practical return path. Keep the two input pins and feedback components away from switching-node copper and high-current output paths. The 8-SOIC footprint provides adequate routing space for short feedback loops, but the common-mode input range and output swing must remain inside the limits of the selected LM358AMX grade.
Use the shortest practical feedback traces and place input-reasoning compensation and gain-setting resistors close to the appropriate amplifier pins. Because the LM358AMX is internally compensated for unity-gain operation, avoid adding unnecessary external compensation that could alter loop stability. Check stability with the actual source impedance, load capacitance, cable length, and supply-bypass configuration because externally connected loads can change the closed-loop response.
Do not assume that the 3 V to 32 V supply rating makes the amplifier rail-to-rail. Verify that both input signals and the required output remain within the input common-mode and output-swing limits. Include the 3 mV input offset in precision calculations, and test the circuit at minimum and maximum supply voltage. For a replacement, confirm pin functions and electrical limits instead of relying only on the 8-SOIC footprint.
Maklumat Kesediaan
No definitive LM358AMX-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The Fairchild aggregation page displays a RoHS field without a definitive status, so the status remains unknown.