onsemi

LM358AMX - Dual 3-32V Op Amp in 8-SOIC | onsemi

Артикул: LM358AMX ✓ Активен
3 V to 32 V Vdss 8-SOIC Package Internally compensated for unity gain Speed
MOQ: 1 |

LM358AMX Обзор

The onsemi LM358AMX is a dual, general-purpose operational amplifier with two independent amplifier channels, a 3 V to 32 V power-supply range, and an 8-SOIC package. It provides a minimum common-mode rejection ratio of 65 dB, a large-signal voltage gain of 100 dB, and a typical input offset voltage of 3 mV. The part is designed for low-cost signal conditioning, feedback-control, and analog-signal amplification applications.

An operational amplifier, or op amp, is a high-gain differential amplifier whose closed-loop behavior is determined mainly by external feedback components. The LM358 belongs to the dual-operational-amplifier hierarchy, which sits within analog ICs and the broader semiconductor category. Its two channels can amplify separate signals or work together in differential, summing, comparator-style, and current-feedback configurations.

The principal characteristics of the LM358AMX include internal frequency compensation for unity-gain operation, two amplifier circuits in one package, and operation from a single positive supply of 3 V to 32 V. The 100 dB large-signal voltage gain supports accurate closed-loop amplification when paired with conventional resistor networks. A minimum 65 dB common-mode rejection ratio helps reduce common-mode input signals when the input waveform contains large DC or externally coupled noise components.

The internally compensated architecture simplifies the implementation of unity-gain voltage followers and standard inverting or non-inverting gain stages. Although the amplifier operates from a single positive supply, its input common-mode range does not extend fully to the negative rail. Designers should also account for input offset voltage, output-current capability, supply-voltage headroom, and the finite output-voltage swing when setting resistor values and signal ranges.

Typical uses include industrial sensor interfaces, low-voltage control loops, audio preamplifier stages, current-monitoring circuits, and general instrumentation. In a sensor interface, the amplifier can convert a small transducer signal into a voltage referenced to ground. In a power-control application, it can amplify an error signal before driving a transistor or power stage, provided the feedback network maintains stable closed-loop operation.

For a new design, begin by confirming the required input and output voltage ranges against the operating supply. Place the bypass capacitor close to the supply pin, keep feedback traces short, and avoid long paths adjacent to switching nodes. The SOIC outline allows the same footprint to be considered for compatible dual general-purpose amplifier options, but electrical behavior and supply limits should be checked before substitution.

This product record combines the exact LM358AMX package identity, channel and supply characteristics, cross-reference options, and practical PCB guidance with a parameter-by-parameter comparison. It is designed to accelerate component selection for analog signal-conditioning and control designs while keeping replacement decisions traceable to manufacturer and distributor documentation.

Аналоги без доработки для LM358AMX — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с LM358AMX (тот же форм-фактор и посадочное место) — отличается по Package, Amplifier Type, Input Offset Voltage, Slew Rate, Number of Circuits.

onsemi
Package: 8-SOIC, 3.90 mm width
Amplifier Type: General Purpose
Slew Rate: 0.6 V/µs
Сравнить с LM358AMX →
Texas Instruments
Amplifier Type: Dual general-purpose operational amplifier
Number of Circuits: 2 circuits
onsemi
Input Offset Voltage: 7 mV
Slew Rate: 0.6 V/µs
Сравнить с LM358AMX →
Texas Instruments
Package: SOIC-8 (D)
Amplifier Type: General Purpose Operational Amplifier
Input Offset Voltage: 2 mV (typ), 7 mV (max)
Сравнить с LM358AMX →

LM358DR

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 8-SOIC
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

Уточнить цену

Открыть даташит →

LM358DG

✅ Прямая замена ⚠️ Характеристики не проверены
onsemi
📦 8-SOIC
2 channels · Dual operational amplifier · 1 MHz · 0.6 V/µs · 3 V to 32 V · 65 dB · 7 mV · Extends to ground/VEE

Уточнить цену

Открыть даташит →

LM358AMX/NOPB

✅ Прямая замена
Texas Instruments
📦 8-SOIC
Dual general-purpose operational amplifier · 2 circuits · 2 amplifiers · 32 V · 1 MHz · 0°C to 70°C · SOIC (D) · 8 pins

Уточнить цену

Открыть даташит →

LM358DR

✅ Прямая замена
Texas Instruments
📦 8-SOIC
General Purpose Operational Amplifier · 2 · 700 kHz · 0.3 V/µs · 3 V to 32 V · ±1.5 V to ±16 V · 0.7 mA (typ) · 2 mV (typ), 7 mV (max)

Уточнить цену

Открыть даташит →

LM358ADR2G

✅ Прямая замена
onsemi
📦 8-SOIC
General Purpose · 2 channels · 3 V to 32 V · 1 MHz · 0.6 V/µs · Extends to ground or VEE · Single supply or split supply · 8-SOIC, 3.90 mm width

Уточнить цену

Открыть даташит →

LM358AMX Максимальные параметры и электрические характеристики

Number of Channels 2 channels
Product Type Standard general-purpose operational amplifier
Power Supply Range 3 V to 32 V
Common-Mode Rejection Ratio 65 dB minimum
Input Offset Voltage 3 mV
Large-Signal Voltage Gain 100 dB
Frequency Compensation Internally compensated for unity gain
Корпус 8-SOIC
Тип монтажа Surface mount
Количество выводов 8 pins

Конфигурация выводов LM358AMX

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 OUT1 — Amplifier 1 output
Контакт 2 IN1- — Amplifier 1 inverting input
Контакт 3 IN1+ — Amplifier 1 non-inverting input
Контакт 4 GND — Ground connection
Контакт 5 IN2+ — Amplifier 2 non-inverting input
Контакт 6 IN2- — Amplifier 2 inverting input
Контакт 7 OUT2 — Amplifier 2 output
Контакт 8 V+ — Positive power-supply connection

Типичное применение

LM358AMX подходит для 6 применениеs: Industrial Sensor Signal Conditioning, Power-Supply Feedback Control, Audio Preamplifier Stage, Current Monitoring and Control, Instrumentation and Active Filtering, Portable and Battery-Powered Electronics.

🏭

Industrial Sensor Signal Conditioning

The LM358AMX is suitable for conditioning low-level sensor signals in industrial equipment because its two channels can provide gain and active filtering within one 8-SOIC package. Its 3 V to 32 V supply range supports both compact embedded systems and higher-voltage industrial rails, while the documented 100 dB large-signal gain supports closed-loop amplification with external resistor ratios. The 3 mV input offset must be included in total measurement error, and the selected input common-mode voltage must remain inside the amplifier's operating range. For slow-changing thermistor or potentiometer signals, the second channel can form a low-pass filter or buffer a reference node.

⚡

Power-Supply Feedback Control

LM358AMX can amplify the error voltage produced by a feedback divider and support closed-loop control of a power-conversion stage. The internal unity-gain compensation simplifies a voltage-follower-based control architecture, and the 3 V to 32 V operating range accommodates both low-voltage digital supplies and higher industrial input buses. In this application, output-current capability and slew rate are as important as voltage gain, so those values must be checked against the compensation network and power-stage drive requirements. Keep the feedback divider close to the amplifier and separate it from switching-node copper to avoid adding high-frequency noise to the control loop.

🎧

Audio Preamplifier Stage

The LM358AMX can provide voltage gain and impedance conversion in a low-cost audio preamplifier built around a single positive supply. Its internally compensated amplifier channels are useful for non-inverting and inverting stages, while the dual arrangement allows one channel to amplify the program signal and the other to provide gain or buffering. The 100 dB large-signal voltage gain supports accurate resistor-defined gain, and the 3 V to 32 V supply range accommodates portable and fixed installations. Audio-band performance, output swing, noise, and stability with the selected source impedance should be evaluated before using the device in a high-fidelity signal path.

🔧

Current Monitoring and Control

LM358AMX is appropriate for amplifying the voltage produced by a current-sense element when the design also needs a single-supply amplifier with two available channels. One channel can amplify the sense voltage, while the second can buffer the reference or implement gain compensation around a downstream converter. The documented 65 dB minimum common-mode rejection ratio helps reject common-mode disturbance present on the sense signal, and the 3 mV offset defines an important baseline for error calculations. Confirm that the monitored current and amplifier input produce voltages that remain within the common-mode and output-swing limits throughout the operating range.

🖥️

Instrumentation and Active Filtering

The LM358AMX can implement basic instrumentation and active-filter functions where low component count and a single positive supply are priorities. Two independent channels allow a signal to be amplified and then filtered, or two sensors can be conditioned in one package. Its 100 dB large-signal gain provides headroom for resistor-defined closed-loop stages, and internal frequency compensation supports unity-gain buffer configurations. Precision measurements should include the 3 mV input offset in the error budget and verify that the common-mode input range accommodates sensor outputs. For high-accuracy or low-drift requirements, a precision amplifier family may provide a better fit.

📱

Portable and Battery-Powered Electronics

LM358AMX is usable in portable and battery-powered electronics when the operating rail remains within its 3 V to 32 V capability and the circuit does not require rail-to-rail inputs. Two channels reduce the number of amplifier packages needed for a gain stage plus buffer, which can simplify board partitioning in compact products. The SOIC-8 package supports conventional surface-mount assembly, and the internally compensated architecture avoids an external unity-gain compensation capacitor. Battery designs should nevertheless evaluate supply-current consumption, dropout behavior, input common-mode headroom, and output swing during battery discharge because these depend on the selected grade and operating conditions.

Where can I download the LM358AMX datasheet PDF?
The LM358AMX datasheet and supporting product documentation can be reached through the onsemi datasheet listing and the Texas Instruments LM358-N product page. The onsemi listing identifies LM358AMX as a dual, general-purpose operational amplifier in an 8-SOIC package. For a replacement, use the manufacturer pin-description table and electrical-characteristics section to verify supply voltage, common-mode input range, output swing, and package dimensions before approving a substitution.
What is the operating voltage range of the LM358AMX?
The LM358AMX operates from a single positive supply of 3 V to 32 V. According to the Fairchild LM358AMX documentation, the LM358A family supports the 3 V to 32 V supply range, allowing operation from conventional low-voltage rails through industrial supply systems. The usable input and output swing remains narrower than the full supply range, so the circuit must retain the voltage headroom required by the selected gain configuration.
What are the key specifications of LM358AMX that engineers should know?
The LM358AMX is a dual, general-purpose operational amplifier with two amplifier circuits, a 3 V to 32 V supply range, an 8-SOIC package, and internal unity-gain frequency compensation. The documented minimum common-mode rejection ratio is 65 dB, the large-signal voltage gain is 100 dB, and the input offset voltage is 3 mV. These characteristics make it suitable for general analog signal conditioning, feedback control, and sensor-interface circuits.
Where can I find the LM358AMX pinout?
The LM358AMX pinout is identified in the manufacturer pin-description table for the 8-SOIC package. Pins 1 and 7 are the two amplifier outputs, pins 2 and 6 are the inverting inputs, pins 3 and 5 are the non-inverting inputs, pin 4 is ground, and pin 8 is the positive supply. Use the package drawing when assigning PCB nets because exposed or alternate package variants may use different terminal arrangements.
Is LM358AMX suitable for sensor interface applications?
Yes, LM358AMX is suitable for many sensor-interface applications powered from 3 V to 32 V. Its dual-channel arrangement permits one amplifier to condition the sensor and another to provide buffering or active filtering. The 3 mV input offset and 65 dB minimum common-mode rejection ratio should be checked against the sensor output range and required accuracy. Biasing, common-mode headroom, and output swing can determine whether additional offset correction or instrumentation-amplifier architecture is preferable.
LM358AMX vs LM358AMX/NOPB - which is better for an SOIC-8 design?
Both LM358AMX and LM358AMX/NOPB are identified as dual, general-purpose operational amplifiers in an 8-SOIC package, but the manufacturer and ordering suffix differ. LM358AMX is associated with onsemi, while LM358AMX/NOPB is the Texas Instruments ordering designation shown in the LM358AMX/NOPB product listing. A footprint match alone does not establish interchangeability; verify pinout, supply range, offset, common-mode limits, output swing, and traceability before substitution.
When should I choose LM358AMX over a precision op amp?
Choose LM358AMX when the application needs two general-purpose amplifier channels, a 3 V to 32 V supply range, and a straightforward SOIC-8 implementation rather than the lowest offset or noise. Its documented 3 mV input offset and 65 dB minimum common-mode rejection ratio are appropriate for many feedback-control and signal-conditioning tasks. Use a precision amplifier when offset drift, bias-current matching, low noise, or tighter common-mode performance materially affects measurement accuracy.
What can replace LM358AMX without changing the PCB footprint?
The closest documented footprint candidate is Texas Instruments LM358AMX/NOPB, which is listed as an 8-SOIC dual general-purpose amplifier. The onsemi LM358DR and LM358DG family variants also use the 8-SOIC format, as do Texas Instruments LM358DR and LM358ADR options. Before using any candidate as a drop-in replacement, compare pin functions, input common-mode range, output swing, offset voltage, supply current, noise, and operating-temperature limits.
What is the best cross-brand equivalent for LM358AMX?
The Texas Instruments LM358AMX/NOPB is the best directly documented cross-brand candidate because it is explicitly listed as a dual, standard general-purpose amplifier in an 8-SOIC package. Compatibility still depends on identical pin assignment and acceptable differences in common-mode range, output swing, offset, and supply behavior. Confirm those details in the manufacturer datasheets before committing to a cross-brand replacement.
Is LM358AMX the same as LM358DR?
LM358AMX and LM358DR are orderable members of the onsemi LM358AM family and can share the 8-SOIC footprint, but their order codes and sourcing conditions differ. The electrical suitability of a substitution depends on the specific LM358AMX datasheet limits applying to the target grade and temperature range. Check channel offset, input bias current, common-mode rejection, output swing, and standard operating temperature rather than treating the suffix change as automatically identical.
How should I design the power supply connection for LM358AMX?
Connect pin 8 to the positive supply and pin 4 to ground, then place a supply-bypass capacitor close to the device. The LM358AMX operates from 3 V to 32 V, but the chosen capacitor, voltage rating, and stability must remain suitable for the actual rail and environmental conditions. Keep the ground return short, avoid placing sensitive inputs beneath switching-node copper, and verify that the regulator can support the amplifier's supply-current demand.
Does LM358AMX need an output compensation capacitor?
The LM358AMX is internally frequency compensated for unity-gain operation, so a conventional external dominant-pole compensation capacitor is normally unnecessary for unity-gain voltage-follower service. Feedback impedance and capacitive loading can still affect stability, particularly at higher closed-loop gains or when driving long cables. Use the manufacturer's recommended feedback values and evaluate the completed circuit with the actual source impedance, load, and supply decoupling.
Where can I buy LM358AMX and check current lead time?
Use the Request a Quote form on this page to request LM358AMX pricing, stock confirmation, minimum order quantity, and current lead time from XAIPART. The distributor listing identifies LM358AMX as an available 8-SOIC dual operational amplifier, but inventory and delivery schedules can change by date and order quantity. Include your required package quantity and target date in the quote request for an actionable response.
Is LM358AMX in stock?
Current LM358AMX inventory should be confirmed through the Request a Quote form on this page. Distributor search results indicate that the part is offered in an 8-SOIC package, but a search-result listing does not guarantee the quantity available for a specific shipment. Submit the required quantity and destination, and the supplier can confirm allocation, lead time, and order status before you place the order.
How do I compare LM358AMX with an alternative dual op amp?
Compare LM358AMX with alternatives by checking package pinout, supply range, input common-mode range, output swing, offset voltage, input bias current, gain-bandwidth product, slew rate, output current, noise, and operating-temperature grade. The target is a dual amplifier in an 8-SOIC package with a 3 V to 32 V supply range, 100 dB large-signal gain, and 65 dB minimum common-mode rejection. A correct footprint match is necessary but does not by itself establish equivalent signal-chain behavior.

Справочные инженерные данные для LM358AMX — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose LM358AMX when the design requires two independent general-purpose amplifier channels in an 8-SOIC package, a 3 V to 32 V single supply, and straightforward internally compensated unity-gain operation. The onsemi LM358DR and LM358DG are suitable same-brand family selections when their ordering conditions fit the build, while Texas Instruments LM358AMX/NOPB is the closest explicitly documented cross-brand candidate. Use LM358ADR only after checking the exact TI electrical grade, temperature range, and sourcing requirements. Avoid choosing a generic LM358 equivalent solely by package: verify pinout, input common-mode range, output swing, offset voltage, bias current, gain-bandwidth product, slew rate, output current, and noise. For precision measurement, rail-to-rail input, micropower operation, or automotive qualification, a dedicated amplifier family may be more appropriate than any drop-in LM358-family option.

Сравнение с аналогами

Параметр Этот товар LM358DR LM358DG LM358AMX/NOPB LM358DR LM358ADR
Brand onsemi onsemi onsemi Texas Instruments Texas Instruments Texas Instruments
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Number of Channels 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Product Classification Standard general-purpose amplifier General-purpose dual operational amplifier General-purpose dual operational amplifier Standard general-purpose amplifier LM358 family dual operational amplifier LM358 family dual operational amplifier

Ключевые отличия

  • Direct dual-amplifier ordering identity (против LM358AMX/NOPB)
  • Single-supply operating range (против LM358DR)
  • Established general-purpose amplification characteristics (против LM358ADR)

Заметки по проектированию

Place the supply-bypass capacitor directly between pins 8 and 4, with the ground connection using the shortest practical return path. Keep the two input pins and feedback components away from switching-node copper and high-current output paths. The 8-SOIC footprint provides adequate routing space for short feedback loops, but the common-mode input range and output swing must remain inside the limits of the selected LM358AMX grade.

Use the shortest practical feedback traces and place input-reasoning compensation and gain-setting resistors close to the appropriate amplifier pins. Because the LM358AMX is internally compensated for unity-gain operation, avoid adding unnecessary external compensation that could alter loop stability. Check stability with the actual source impedance, load capacitance, cable length, and supply-bypass configuration because externally connected loads can change the closed-loop response.

Do not assume that the 3 V to 32 V supply rating makes the amplifier rail-to-rail. Verify that both input signals and the required output remain within the input common-mode and output-swing limits. Include the 3 mV input offset in precision calculations, and test the circuit at minimum and maximum supply voltage. For a replacement, confirm pin functions and electrical limits instead of relying only on the 8-SOIC footprint.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No definitive LM358AMX-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified. The Fairchild aggregation page displays a RoHS field without a definitive status, so the status remains unknown.

Данные проверены: 2026-11-13 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

lm358amx nopb LM358AMX datasheet LM358AMX datasheet pdf LM358AMX pinout LM358AMX equivalent LM358AMX replacement LM358AMX cross reference LM358AMX vs LM358AMX/NOPB onsemi LM358AMX LM358AMX 8-SOIC amplifier LM358AMX 3V 32V op amp LM358AMX price

Связанные компоненты & термины

onsemi Texas Instruments LM358AMX LM358AMX/NOPB LM358DR LM358DG LM358ADR dual operational amplifier operational amplifier amplifier IC analog IC semiconductor single-supply amplifier unity-gain buffer 8-SOIC SOIC family surface-mount package common-mode rejection ratio CMRR input offset voltage large-signal voltage gain frequency compensation sensor signal conditioning feedback control power management
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ