LM358MX/NOPB - Dual 32-V 1-MHz Op Amp | Texas Instruments
MPN: LM358MX/NOPB ✓ AktifLM358MX/NOPB Ringkasan
An operational amplifier is an active semiconductor device that uses high open-loop gain to amplify the difference between its two input terminals. When negative feedback is applied, the amplifier can create stable gain, improve input impedance, and reduce output impedance. The LM358MX/NOPB belongs to the broader hierarchy of operational amplifiers, analog amplifiers, and integrated analog ICs, with its dual-channel configuration reducing the component count when two independent amplifier functions are required.
The principal headline specifications are a 32 V maximum supply voltage, 1 MHz gain-bandwidth product, and operation over a 0°C to 70°C temperature range. Its 8-pin SOIC package supports conventional surface-mount PCB assembly. The SOIC form factor is widely used for analog signal-conditioning boards because it provides a compact, standard footprint and can be placed alongside resistors, capacitors, and precision components in ordinary production layouts.
Each amplifier channel includes true differential inputs, allowing a signal to be referenced between two input nodes rather than only against ground. Internal frequency compensation supports general-purpose feedback configurations without requiring an external compensation network in ordinary low-frequency designs. The two channels can be used independently, or they can participate in circuits such as instrumentation stages, active filters, comparators, and difference amplifiers, subject to the limits of the device and the external components.
Typical applications include sensor-signal conditioning, low-frequency active filters, voltage followers, comparator circuits, audio preamplifier stages, and battery-powered instrumentation. The 3 V to 32 V supply capability is useful for systems operating from a single low-voltage rail as well as industrial boards with substantially higher supply voltage. Designers should still verify input and output common-mode limits, output-current capability, and stability with the actual external network before using the device outside its published operating region.
For new layouts, follow the manufacturer's pin-description table and place input and output components close to the associated pins to minimize parasitic effects. Decoupling capacitors should connect to a low-impedance ground reference, while feedback components should be positioned to keep sensitive output routing away from high-impedance input nodes. This is especially important for sensor interfaces where cable capacitance or leakage current can disturb a high-impedance measurement node.
This product page organizes the Texas Instruments LM358MX/NOPB specifications, practical use cases, pin information, and pin-compatible alternatives into a design-focused reference. It also highlights the distinctions engineers should evaluate when changing operational-amplifier suppliers: electrical limits, package details, temperature coverage, qualification, and confirmed pin compatibility should be reviewed before a substitution is approved.
Pilihan pengganti yang segera untuk LM358MX/NOPB — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
Varietas dalam siri ini
Model serupa yang kompatibel dengan pengganti yang segera LM358MX/NOPB (sama faktor bentuk dan kaki) — berbeza dalam Package, Gain-Bandwidth Product, Slew Rate, Mounting Type, Input Offset Voltage.
LM358N
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM358DT
✅ Masuk Drop-In✓ Ada di Stok
$0.0509 / Unit
Lihat Datasheet →LM358DG
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM358DRG4
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →RC4558
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LM2904DR
✅ Masuk Drop-InHubungi untuk harga
Lihat Datasheet →LM358MX/NOPB Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | Dual general-purpose operational amplifier |
| Number of Amplifier Channels | 2 |
| Maximum Supply Voltage | 32 V |
| Operating Supply Voltage Range | 3 V to 32 V |
| Gain-Bandwidth Product | 1 MHz |
| Supply Type | Single supply |
| Input Configuration | True differential inputs |
| Gambaran Suhu Operasi | 0°C to 70°C |
| Kemasan | 8-pin SOIC (D) |
| Bilangan Pin | 8 |
| Jenis Pemasangan | Surface mount |
| Amplifier Classification | Standard general-purpose amplifier |
Konfigurasi Pin LM358MX/NOPB
| Pin 1 | OUT1 — Amplifier 1 output |
| Pin 2 | IN1- — Amplifier 1 inverting input |
| Pin 3 | IN1+ — Amplifier 1 non-inverting input |
| Pin 4 | GND — Ground connection |
| Pin 5 | IN2+ — Amplifier 2 non-inverting input |
| Pin 6 | IN2- — Amplifier 2 inverting input |
| Pin 7 | OUT2 — Amplifier 2 output |
| Pin 8 | V+ — Positive supply voltage |
Aplikasi Biasa
LM358MX/NOPB patut untuk 6 aplikasis: Sensor Signal Conditioning, Active Audio Filters, Battery-Powered Instrumentation, Voltage Buffering, Threshold Detection, Process-Control Monitoring.
Sensor Signal Conditioning
The LM358MX/NOPB fits differential sensor interfaces that require amplification before digitization or filtering. Its two channels can amplify a sensor differential and buffer the resulting signal without adding a second package. The 1 MHz gain-bandwidth product supports closed-loop gains appropriate to many low-frequency measurement paths, while the 32 V maximum supply accommodates higher-voltage industrial signal sources. Designers should confirm the input common-mode range at the selected supply and supply voltage, and they should verify sensor-specific offset and noise requirements before using the device in precision measurements.
Disebarkan
Active Audio Filters
The LM358MX/NOPB can implement low-frequency active filtering in audio preamplifier and signal-conditioning circuits. Its dual configuration allows one channel to form a filter section while the other performs buffering or gain control. The 1 MHz gain-bandwidth product leaves bandwidth above many audible and low-frequency control applications, and the 8-pin SOIC package supports compact board layouts. Component tolerances and the amplifier’s open-loop gain behavior determine filter accuracy, so simulation should verify closed-loop gain, output swing, and stability with the actual network.
Disebarkan
Battery-Powered Instrumentation
A 3 V to 32 V single-supply operating range makes the LM358MX/NOPB relevant to portable measurement equipment powered from batteries or low-voltage laboratory rails. Both amplifier channels operate from the same supply, simplifying the power architecture for sensor interfaces, monitor buffers, and threshold detectors. At the lowest operating voltage, the designer should check output swing and input common-mode range because the usable signal range can be narrower than the supply itself. Total system power, including feedback networks and external sensors, must also be evaluated for battery-life requirements.
Disebarkan
Voltage Buffering
The LM358MX/NOPB can buffer a high-impedance voltage source into a lower-impedance node for an ADC, data converter, or subsequent analog stage. Voltage-follower connection minimizes gain error while keeping the 8-pin SOIC package compact, and the second channel can buffer another signal or provide gain. Designers should preserve the device’s input common-mode and output-swing limits, especially at low supply voltages. Short feedback traces, a stable ground reference, and separation from noisy switching nodes are important when the source contains high impedance or when the target converter requires a low-noise supply rail.
Disebarkan
Threshold Detection
The LM358MX/NOPB can be configured as a comparator for threshold detection when its specified input, output, and timing behavior suits the system. The two channels allow independent reference comparison and warning functions, and the 1 MHz gain-bandwidth product is adequate for many low-speed threshold events. Output saturation, input overdrive, propagation delay, and the allowable output load must be checked rather than treating the device as a dedicated high-speed comparator. A pullback resistor or pull-down arrangement should also match the output-stage behavior used by the selected circuit.
Disebarkan
Process-Control Monitoring
The LM358MX/NOPB is appropriate for low-frequency process-control monitoring circuits that amplify transducer signals, buffer control inputs, or detect operating thresholds. Its 32 V maximum supply and 0°C to 70°C rating fit many industrial control environments, while the 8-SOIC package simplifies standardized analog boards. The amplifier should be evaluated against precision requirements because offset voltage, bias current, noise, input range, and output-current limits can affect a measurement chain. Protection from transients, grounding strategy, and isolation from motor or relay switching noise remain important practical considerations.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LM358MX/NOPB — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LM358N | LM358DT | LM358DG | LM358DRG4 | RC4558 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | STMicroelectronics |
| Package | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC | 8-SOIC |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Number of Pins | 8 | 8 | 8 | 8 | 8 | 8 |
Penyeberangsung Jelas
- Exact Texas Instruments orderable family positioning (vsLM358N)
- Two independent general-purpose amplifier channels (vsRC4558)
- Single-supply compatibility from 3 V to 32 V (vsLM2904)
Catatan Desain
Place the input, output, feedback, and bypass components close to their associated LM358MX/NOPB pins. Keep amplifier 1 and amplifier 2 return paths tied to a quiet ground reference, and avoid routing sensitive input nodes beneath switching-regulator or digital-clock traces. Because the SOIC footprint provides limited spacing, use short feedback loops and route the ground connection directly to the decoupling network rather than through a narrow branch shared with unrelated analog stages.
Use local supply bypassing with the capacitance and placement specified in the manufacturer documentation. The LM358MX/NOPB supports a single supply from 3 V to 32 V, but the usable input and output signal range can be narrower than the supply voltage. Confirm common-mode input limits and output swing at the minimum operating supply, especially in battery-powered systems, before defining the analog signal range. Add supply-energy storage or filtering where an upstream switching node introduces ripple.
Do not assume that an 8-pin dual operational amplifier is pin-compatible with every quad or dual comparator family. Verify the SOIC pin sequence, power pin, ground pin, input polarity, output behavior, common-mode range, and stability requirements. In particular, using a general-purpose amplifier as a comparator can create timing, saturation, and output-current surprises. Confirm the complete orderable-device suffix and temperature grade before approving a replacement on an existing PCB.
For sensor interfaces, separate the high-impedance input route from the output and feedback components to reduce parasitic coupling and improve stability. Keep sensitive ground returns short and establish a deliberate relationship between analog ground, supply return, and any external converter grounding scheme. The dual-channel package allows useful signal-flow placement, but nearby switching circuitry can still dominate noise performance. A single-point analog ground strategy should be selected according to the complete board power architecture rather than applied mechanically.
Maklumat Kesediaan
The device is a general-purpose commercial operational amplifier. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation or declaration.