NXP Semiconductors

LPC1114FHI33/302 - 32-bit 50MHz Cortex-M0 MCU | NXP

MPN: LPC1114FHI33/302 ✓ Aktif
32-HVQFN, 5 x 5 mm Package 50 MHz Speed 32 KB Flash (32K x 8) Memory
MOQ: 1 |

LPC1114FHI33/302 Ringkasan

The NXP Semiconductors LPC1114FHI33/302 is a 32-bit Arm Cortex-M0 microcontroller with a 50 MHz maximum CPU frequency, 32 KB of Flash program memory, and 8 KB of SRAM in a 32-HVQFN 5 x 5 mm package. The LPC1114FHI33/302 also provides 28 I/O pins and an 8-channel, 10-bit ADC, making it suitable for compact embedded control, metering, industrial automation, lighting, and alarm-system designs.

A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The LPC1114FHI33/302 belongs to the LPC11xx family of low-cost 32-bit Arm Cortex-M0 microcontrollers. This family targets applications previously handled by 8-bit and 16-bit devices while providing a 32-bit architecture, a simple instruction set, and low power consumption.

The main device features include up to 50 MHz operating frequency, 32 KB of Flash, and 8 KB of SRAM. The 28 available I/O pins support digital communication and control functions, while the integrated 8-channel 10-bit ADC enables analog measurement. The LPC111x family is intended for designs requiring low-cost embedded processing, fast-mode serial interfaces, and compact code footprints.

The Cortex-M0 core uses the Arm Thumb instruction set and supports a straightforward interrupt-driven design model. Its 32-bit architecture provides larger addressing capability and efficient control-code execution, while the 32 KB Flash region limits application size. Firmware and peripheral configuration should be checked against the device’s user manual and application notes before production release.

Typical uses include eMetering, lighting control, alarm systems, simple industrial controllers, sensor nodes, and compact consumer equipment. The 32-HVQFN package also supports space-constrained designs, but its fine pitch and exposed thermal pad require careful PCB layout, adequate solder mask and paste control, and a thermal design that keeps junction temperature within the device limits.

For a new layout, follow the NXP package footprint and pin-assignment documentation exactly, especially for power, ground, analog inputs, reset, and the exposed pad. Check the LPC1114FHI33 device configuration and the /302 ROM variant in the LPCXpresso or Arm Keil device configuration before programming production firmware.

This product page combines the NXP family specifications, package information, programming references, and practical replacement guidance. It highlights the 50 MHz Cortex-M0 performance, memory capacity, ADC resources, and design constraints engineers must evaluate when replacing an MCU on an existing 32-HVQFN board.

Pilihan pengganti yang segera untuk LPC1114FHI33/302 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

LPC1114FHI33/303

✅ Masuk Drop-In
📦 32-HVQFN (5x5)
Same LPC1114FHI33 family and HVQFN32 format, but the /303 ROM configuration differs from /302; core rating remains 50 MHz with 32 KB Flash and 8 KB SRAM.

📋 Alternatif rujukan (tidak dalam katalog)

LPC1114FHN33/302

✅ Masuk Drop-In
📦 32-HVQFN (5x5)
Same LPC1114 family, /302 ordering level, 50 MHz Cortex-M0 core, 32 KB Flash, and 8 KB SRAM; FHI versus FHN ordering-code details require confirmation before substitution.

📋 Alternatif rujukan (tidak dalam katalog)

LPC1114FHI33/302 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit ARM Cortex-M0 microcontroller
Manufacturer NXP Semiconductors
CPU Core Arm Cortex-M0
Maximum CPU Frequency 50 MHz
Program Memory 32 KB Flash (32K x 8)
SRAM 8 KB
Number of I/O Pins 28
ADC 8-channel, 10-bit
Architecture 32-bit
Gambaran Suhu Operasi -40 °C to +85 °C
Kemasan 32-HVQFN, 5 x 5 mm
Jenis Pemasangan Surface mount
GPIO Count 28 pins
ADC Resolution 10 bit
ADC Channel Count 8 channels

Panduan Konfigurasi Pin LPC1114FHI33/302 32-hvqfn, 5 x 5 mm

Konfigurasi pin untuk LPC1114FHI33/302 (32-hvqfn, 5 x 5 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 32-hvqfn, 5 x 5 mm untuk LPC1114FHI33/302

Tiada data garisan pin yang diperoleh untuk LPC1114FHI33/302.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LPC1114FHI33/302 patut untuk 6 aplikasis: Smart eMetering, Industrial Lighting Control, Alarm and Security Panels, Compact Sensor Nodes, Industrial Automation Modules, USB-to-Serial Interface and Embedded Hubs.

⚡

Smart eMetering

The LPC1114FHI33/302 fits compact metering designs that require deterministic embedded control, serial data handling, and limited analog acquisition. Its Arm Cortex-M0 core operates up to 50 MHz, while 32 KB of Flash accommodates metering algorithms and 8 KB of SRAM supports working buffers. The integrated 8-channel, 10-bit ADC can sample sensed current, voltage, temperature, or other analog conditions. Engineers should verify the required input range, accuracy, sampling rate, and calibration strategy against the manufacturer’s ADC and electrical specifications. Serial communication, pulse counting, tamper handling, and low-power behavior can then be divided among the Cortex-M0 core and the LPC11xx peripheral set.

💡

Industrial Lighting Control

The LPC1114FHI33/302 is appropriate for LED and conventional lighting controllers where timing, relay or MOSFET drive, diagnostics, and communication are combined in one compact module. Its 50 MHz Cortex-M0 core provides ample control bandwidth for dimming sequences, fault handling, and communication protocols, while the 28 I/O pins reduce the need for additional logic. The 10-bit, 8-channel ADC can monitor current or temperature inputs when the control board includes suitable sensing circuitry. Firmware must enforce lamp timing and thermal limits because the MCU does not replace output-stage protection. The 32-HVQFN footprint is useful for compact industrial modules, provided the exposed pad and fine-pitch assembly process are handled correctly.

🛡️

Alarm and Security Panels

The LPC1114FHI33/302 can supervise alarm zones, status indicators, keypads, and communications in a cost-conscious security panel. Its 28 available I/O pins support multiple digital inputs and outputs, while the 8-channel ADC can monitor analog sensor or tamper channels where appropriate. The 50 MHz Arm Cortex-M0 core allows event handling, debounce logic, and protocol tasks to execute predictably, and 8 KB of SRAM is sufficient for compact message queues and control state. For battery-backed systems, evaluate the controller’s low-power modes and wake behavior directly in the LPC11xx documentation. Security also requires correct handling of stored keys, fault indicators, and communications, not merely sufficient computational performance for the basic alarm routine.

🧩

Compact Sensor Nodes

The LPC1114FHI33/302 supports compact sensor nodes that combine an analog input, local decision logic, and a serial communications link. The integrated 8-channel, 10-bit ADC can acquire basic sensor signals without a separate converter, while the 28 I/O pins allow status LEDs, interlocks, and external interface signals. The Cortex-M0 core’s 50 MHz ceiling and 8 KB of SRAM are appropriate for moderate filtering and protocol overhead rather than demanding edge analytics. Choose the device when local preprocessing, deterministic control, and low system complexity matter more than very large application storage. Validate the sensor signal range, converter settling requirements, and communication timing against the NXP electrical and peripheral specifications before finalizing the board.

🏭

Industrial Automation Modules

The LPC1114FHI33/302 is well suited to small industrial automation modules that perform local sequencing, machine-interface control, analog supervision, and status reporting. The 32-bit Cortex-M0 core at up to 50 MHz can manage multiple timers, communication tasks, and control logic, while the 28-I/O pin count supports digital field interfaces. Its 8-channel 10-bit ADC provides basic process monitoring, and the -40 °C to +85 °C rated variant targets industrial ambient conditions. Industrial qualification status must not be inferred from that temperature range, so regulatory, EMC, and reliability requirements should be assessed separately. The HVQFN package helps achieve compact modules but requires assembly controls and a grounded thermal design around the exposed pad.

🌐

USB-to-Serial Interface and Embedded Hubs

The LPC1114FHI33/302 can serve as the controller in a compact protocol bridge, configuration adapter, or multi-port embedded interface hub. Its 32-bit core handles framing and control tasks, 32 KB Flash stores firmware and descriptors, and 8 KB SRAM supports packet buffers for modest data rates. The 28 I/O pins can support multiple UART, SPI, or I2C endpoints, depending on the device peripheral assignment and multiplexing rules. Firmware must enforce timing, flow control, and fault recovery rather than assuming every logical function maps to a fixed pin. The small 5 x 5 mm HVQFN package supports compact modules, although USB data routing, ESD protection, and high-speed signal integrity require a separate board-level design review.

What are the key specifications of LPC1114FHI33/302 that engineers should know?
The LPC1114FHI33/302 is an active NXP 32-bit Arm Cortex-M0 microcontroller rated up to 50 MHz, with 32 KB Flash memory, 8 KB SRAM, 28 I/O pins, and an 8-channel 10-bit ADC. According to the NXP LPC1114FHI33 product page and family documentation, it is packaged in a 32-HVQFN measuring 5 x 5 mm and is specified for -40 °C to +85 °C ambient operation. These figures define the processor, memory, analog-measurement, I/O, package, and thermal envelope of the device.
Where can I download the LPC1114FHI33/302 datasheet PDF?
The official LPC1114FHI33/302 documentation starts at the NXP product page at https://www.nxp.com/part/LPC1114FHI33, where the Data Sheet and User Manual links are provided. The device belongs to the LPC11xx family, so the family user manual also covers LPC111x register, peripheral, and programming details. Use the NXP-controlled documents for final pin assignments, electrical limits, clock requirements, flash programming procedures, and package drawings rather than relying on a distributor preview.
What is the operating frequency of the LPC1114FHI33/302?
The LPC1114FHI33/302 operates at CPU frequencies up to 50 MHz. According to the NXP LPC1114 product information, the LPC11xx MCU family uses the Arm Cortex-M0 core and is designed around low-cost embedded control. The clock tree and permitted operating configurations should be configured in the device settings using the LPC1100 device family pack, with the final frequency verified against the manufacturer’s electrical characteristics and application requirements.
How much Flash and SRAM does the LPC1114FHI33/302 have?
The LPC1114FHI33/302 provides 32 KB of Flash program memory and 8 KB of SRAM. This allocation appears in the NXP LPC1114FHI33 product information and the LPC1114 datasheet listing. The Flash region holds executable firmware and nonvolatile configuration data, while SRAM provides working memory for the stack, variables, buffers, and peripheral data. Firmware size must include startup code, interrupt handlers, libraries, and application routines.
What package and pin count does the LPC1114FHI33/302 use?
The LPC1114FHI33/302 uses a 32-HVQFN surface-mount package measuring 5 x 5 mm, with 28 usable I/O pins. The package dimensions and 28-I/O arrangement are identified in the NXP and distributor product records. Because HVQFN leads are very closely spaced, the exposed-pad and thermal-land pattern must match the official package drawing. Confirm individual signal names against the LPC1114FHI33 pin-description table before assigning PCB tracks.
Does the LPC1114FHI33/302 have an ADC?
Yes, the LPC1114FHI33/302 includes an 8-channel, 10-bit ADC. The Analog-to-Digital Converter specifications are identified in the LPC1114 datasheet and product records for the device. The ADC can be used to supervise analog sensors, battery or supply conditions, potentiometer positions, and other inputs within the supported voltage range. Confirm the selected pin, reference source, acquisition time, and operating limits in the electrical specification before designing the analog front end.
What tools can program the LPC1114FHI33/302?
The LPC1114FHI33/302 is supported by NXP LPCXpresso and Arm Keil device environments. The Arm Keil device listing identifies LPC1114FHI33/302 in the LPC1100 Series and the LPC1100_DFP device family pack. Configure the exact LPC1114FHI33/302 device and its /302 ROM variant before compiling or flashing, and confirm the selected flash algorithm, target clock, debug interface, and programming voltage against the NXP documentation.
What is the LPC1114FHI33/302 operating temperature range?
The LPC1114FHI33/302 is specified for an ambient operating range of -40 °C to +85 °C. This range appears in the LPC1114FHI33 product records and should be used as the initial environmental screening criterion. Junction temperature, power dissipation, and board temperature can impose tighter design limits than ambient temperature, so verify those conditions from the manufacturer’s electrical characteristics and conduct thermal validation for the assembled product.
Can LPC1114FHI33/303 replace the LPC1114FHI33/302?
LPC1114FHI33/303 is the closest same-brand drop-in candidate identified for the LPC1114FHI33/302 because it uses the LPC1114FHI33 device name and the same HVQFN package family. The /303 designation indicates a different device or ROM configuration, so firmware, boot behavior, and configuration details must be reviewed before substitution. Use the manufacturer’s device documentation and programming tools to confirm that the installed application image, clocks, peripherals, and boot source are compatible.
What is the best drop-in replacement for LPC1114FHI33/302?
LPC1114FHI33/303 is the leading same-brand drop-in candidate identified for the LPC1114FHI33/302, while LPC1114FHN33/302 is another closely related NXP ordering code in the HVQFN32 family. No cross-brand replacement is established as pin-to-pin compatible. Before replacing either device, compare the exact pin table, memory configuration, boot-ROM identity, peripheral availability, package drawing, and production firmware requirements against the original schematic and NXP documentation.
LPC1114FHI33/302 vs LPC1114FHN33/302: which one is better?
LPC1114FHI33/302 is the specified 32-HVQFN device with 32 KB Flash, 8 KB SRAM, 28 I/O pins, and operation up to 50 MHz. LPC1114FHN33/302 is a closely related NXP ordering code that must be checked against the package and pin tables before use. Because ordering-code suffixes can encode package or configuration differences, choose LPC1114FHI33/302 when its exact documented configuration satisfies the design and use the FHN variant only after confirming land-pattern and signal compatibility.
When should I choose LPC1114FHI33/302 over another Cortex-M0 MCU?
Choose LPC1114FHI33/302 when a design specifically calls for an Arm Cortex-M0 MCU with up to 50 MHz operation, 32 KB Flash, 8 KB SRAM, 28 I/O pins, and an 8-channel 10-bit ADC in a 32-HVQFN package. It is well suited to compact metering, lighting, alarm, and industrial-control products with moderate processing requirements. Select another MCU when the design needs more memory, more GPIO, wider analog ranges, faster analog conversion, or a package already supported by the target board.
Is LPC1114FHI33/302 suitable for eMetering and lighting applications?
Yes, the LPC1114FHI33/302 is suitable for eMetering, lighting, and alarm-system designs within its documented resource limits. The Arm Keil LPC1100 family listing identifies these typical applications, while the device provides 50 MHz processing, 32 KB Flash, and 8 KB SRAM for embedded control code. Confirm analog accuracy, serial-interface requirements, timer resources, and metering algorithm timing before release; the MCU core alone does not guarantee application-specific measurement accuracy.
Where can I buy LPC1114FHI33/302 and what is its lead time?
Use the Request a Quote form on this page to ask about LPC1114FHI33/302 availability, current lead time, minimum order quantity, and packaging requirements. The NXP product page identifies the device as active, while distributor search records show market listings. Quote and stock conditions can change, so request the current commitment directly rather than relying on a historical listing or an unconfirmed delivery interval. The part’s official ordering code should be quoted as LPC1114FHI33/302.
What is the price of LPC1114FHI33/302?
The current commercial terms for LPC1114FHI33/302 should be requested through the Request a Quote form on this page. Price depends on order quantity, package or shipping format, authorized-channel availability, and current inventory. The NXP product page identifies the LPC1114FHI33 family member as active, allowing the request to reference the exact manufacturer device and avoid ambiguity with closely related /301, /302, and /303 ordering codes.
Is LPC1114FHI33/302 in stock?
Stock status should be confirmed through the Request a Quote form on this page for the exact LPC1114FHI33/302 ordering code. Search listings indicate that the device is active and available from multiple channels, but inventory can vary by quantity and package format. Include your required date, annual usage, reel or tray preference, and acceptable partial-shipment policy in the request so the quotation reflects the actual production requirement.
What can replace the LPC1114FHI33/302?
LPC1114FHI33/303 and LPC1114FHN33/302 are the closest identified same-brand candidates for a possible board-level replacement. Their shared LPC1114 heritage and HVQFN32 format make them worth evaluating, but ordering suffixes can change the ROM configuration, package details, or approved ordering route. Treat them as conditional drop-in options only after checking the NXP pin assignments, exposed-pad layout, boot configuration, memory map, and firmware dependencies against the LPC1114FHI33/302.
Is the LPC1114FHI33/302 the same as an equivalent NXP MCU?
No alternative NXP MCU should be treated as identical without an exact order-code comparison. LPC1114FHI33/303 shares the LPC1114FHI33 base designation but represents a distinct ordering code, while LPC1114FHN33/302 changes another portion of the ordering convention. The 50 MHz Cortex-M0 core, 32 KB Flash, and 8 KB SRAM describe the family position, not every configuration difference. Verify the complete ordering table and ROM behavior before concluding that two devices are equivalent.

Data referensi kejuruteraan untuk LPC1114FHI33/302 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose the LPC1114FHI33/302 when the design requires the exact NXP /302 ordering code, an Arm Cortex-M0 core operating up to 50 MHz, 32 KB Flash, 8 KB SRAM, 28 I/O pins, and an integrated 8-channel 10-bit ADC in a 5 x 5 mm HVQFN package. It is appropriate for metering, lighting, alarm, sensor-node, and compact industrial-control products. Consider LPC1114FHI33/303 when its ROM configuration and boot behavior match the application and the exact /302 part is unavailable. Evaluate LPC1114FHN33/302 only after verifying the FHI/FHN package details, ordering configuration, and exact pin assignment. No cross-brand drop-in equivalent is established by the available cross-reference results, so a foreign MCU should not be treated as a footprint-compatible substitute without a full electrical, firmware, and package review.

Perbandingan dengan Gantian

Parametr Produk Ini LPC1114FHI33/303 LPC1114FHN33/302
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (5x5) 32-HVQFN (5x5) 32-HVQFN (5x5)
CPU Core Arm Cortex-M0 Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz
Program Memory 32 KB Flash 32 KB Flash 32 KB Flash
SRAM 8 KB 8 KB 8 KB
ADC 8-channel, 10-bit 8-channel, 10-bit 8-channel, 10-bit
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Ordering-Code Difference LPC1114FHI33/302 /303 ROM configuration FHN ordering code
I/O Pin Count 28 pins 28 pins 28 pins

Penyeberangsung Jelas

  • Exact /302 configuration availability (vsLPC1114FHI33/303)
  • Same documented LPC1114 performance class (vsLPC1114FHN33/302)
  • Compact 32-HVQFN integration (vsLPC1114FHI33/303)

Catatan Desain

Use the official NXP HVQFN32 land pattern rather than scaling a generic QFN footprint. Match the 0.5 mm lead pitch, 5 x 5 mm body dimensions, exposed-pad dimensions, solder-mask opening, and paste-aperture recommendations. Route decoupling capacitors directly to the relevant power and ground pins, and connect the exposed pad to the intended ground or thermal plane according to the package drawing.

Separate analog inputs from switching or high-current digital paths, and keep the ADC ground reference return close to the device. Use a continuous ground reference beneath the MCU where practical, minimize loop area around decoupling components, and place the crystal or clock circuitry according to the LPC11xx hardware design guidance. These measures reduce coupling into the 10-bit ADC and reduce timing uncertainty in the 50 MHz control loop.

Do not treat LPC1114FHI33/302, LPC1114FHI33/303, and LPC1114FHN33/302 as interchangeable solely because their order codes look similar. Verify the complete ordering table, boot-ROM identity, pin multiplex differences, flash programming procedure, and exposed-pad connection before using a replacement. After substitution, rebuild with the exact device selection in LPCXpresso or Arm Keil and perform reset, clock, bootloader, and peripheral tests.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

The available product records identify the device as active and specify its environmental operating range, but they do not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LPC1114FHI33/302 datasheet LPC1114FHI33/302 pinout LPC1114FHI33/302 datasheet pdf LPC1114FHI33/302 equivalent LPC1114FHI33/302 replacement LPC1114FHI33/302 cross reference LPC1114FHI33/302 footprint LPC1114FHI33/302 schematic NXP LPC1114FHI33/302 LPC1114FHI33/302 price LPC1114FHI33/302 stock LPC1114FHI33/302 vs LPC1114FHI33/303 32-HVQFN LPC1114FHI33 pinout LPC1114FHI33/302 application circuit

Komponen dan Tanda berkaitan

NXP Semiconductors LPC1114FHI33/302 LPC1114FHI33/303 LPC1114FHN33/302 Arm Cortex-M0 microcontroller embedded microcontroller 32-bit microcontroller semiconductor LPC11xx LPC1100 Series Flash memory SRAM 10-bit ADC I2C SPI UART 32-HVQFN QFN family surface-mount package LPCXpresso Arm Keil CMSIS eMetering industrial automation
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ