LPC1114FHI33/302 - 32-bit 50MHz Cortex-M0 MCU | NXP
부품 번호: LPC1114FHI33/302 ✓ 활성LPC1114FHI33/302 개요
A microcontroller is a programmable semiconductor device that combines a processor core, memory, and peripherals on one integrated circuit. The LPC1114FHI33/302 belongs to the LPC11xx family of low-cost 32-bit Arm Cortex-M0 microcontrollers. This family targets applications previously handled by 8-bit and 16-bit devices while providing a 32-bit architecture, a simple instruction set, and low power consumption.
The main device features include up to 50 MHz operating frequency, 32 KB of Flash, and 8 KB of SRAM. The 28 available I/O pins support digital communication and control functions, while the integrated 8-channel 10-bit ADC enables analog measurement. The LPC111x family is intended for designs requiring low-cost embedded processing, fast-mode serial interfaces, and compact code footprints.
The Cortex-M0 core uses the Arm Thumb instruction set and supports a straightforward interrupt-driven design model. Its 32-bit architecture provides larger addressing capability and efficient control-code execution, while the 32 KB Flash region limits application size. Firmware and peripheral configuration should be checked against the device’s user manual and application notes before production release.
Typical uses include eMetering, lighting control, alarm systems, simple industrial controllers, sensor nodes, and compact consumer equipment. The 32-HVQFN package also supports space-constrained designs, but its fine pitch and exposed thermal pad require careful PCB layout, adequate solder mask and paste control, and a thermal design that keeps junction temperature within the device limits.
For a new layout, follow the NXP package footprint and pin-assignment documentation exactly, especially for power, ground, analog inputs, reset, and the exposed pad. Check the LPC1114FHI33 device configuration and the /302 ROM variant in the LPCXpresso or Arm Keil device configuration before programming production firmware.
This product page combines the NXP family specifications, package information, programming references, and practical replacement guidance. It highlights the 50 MHz Cortex-M0 performance, memory capacity, ADC resources, and design constraints engineers must evaluate when replacing an MCU on an existing 32-HVQFN board.
드롭인 대체품: LPC1114FHI33/302 — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
LPC1114FHI33/303
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC1114FHN33/302
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LPC1114FHI33/302 최대 정격 & 전기적 특성
| Product Type | 32-bit ARM Cortex-M0 microcontroller |
| Manufacturer | NXP Semiconductors |
| CPU Core | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz |
| Program Memory | 32 KB Flash (32K x 8) |
| SRAM | 8 KB |
| Number of I/O Pins | 28 |
| ADC | 8-channel, 10-bit |
| Architecture | 32-bit |
| 동작 온도 범위 | -40 °C to +85 °C |
| 패키지 | 32-HVQFN, 5 x 5 mm |
| 실장 유형 | Surface mount |
| GPIO Count | 28 pins |
| ADC Resolution | 10 bit |
| ADC Channel Count | 8 channels |
LPC1114FHI33/302 32-hvqfn, 5 x 5 mm 핀 구성 가이드
LPC1114FHI33/302(32-hvqfn, 5 x 5 mm 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: LPC1114FHI33/302.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
LPC1114FHI33/302 적합 용도: 6 애플리케이션s: Smart eMetering, Industrial Lighting Control, Alarm and Security Panels, Compact Sensor Nodes, Industrial Automation Modules, USB-to-Serial Interface and Embedded Hubs.
Smart eMetering
The LPC1114FHI33/302 fits compact metering designs that require deterministic embedded control, serial data handling, and limited analog acquisition. Its Arm Cortex-M0 core operates up to 50 MHz, while 32 KB of Flash accommodates metering algorithms and 8 KB of SRAM supports working buffers. The integrated 8-channel, 10-bit ADC can sample sensed current, voltage, temperature, or other analog conditions. Engineers should verify the required input range, accuracy, sampling rate, and calibration strategy against the manufacturer’s ADC and electrical specifications. Serial communication, pulse counting, tamper handling, and low-power behavior can then be divided among the Cortex-M0 core and the LPC11xx peripheral set.
추천
Industrial Lighting Control
The LPC1114FHI33/302 is appropriate for LED and conventional lighting controllers where timing, relay or MOSFET drive, diagnostics, and communication are combined in one compact module. Its 50 MHz Cortex-M0 core provides ample control bandwidth for dimming sequences, fault handling, and communication protocols, while the 28 I/O pins reduce the need for additional logic. The 10-bit, 8-channel ADC can monitor current or temperature inputs when the control board includes suitable sensing circuitry. Firmware must enforce lamp timing and thermal limits because the MCU does not replace output-stage protection. The 32-HVQFN footprint is useful for compact industrial modules, provided the exposed pad and fine-pitch assembly process are handled correctly.
추천
Alarm and Security Panels
The LPC1114FHI33/302 can supervise alarm zones, status indicators, keypads, and communications in a cost-conscious security panel. Its 28 available I/O pins support multiple digital inputs and outputs, while the 8-channel ADC can monitor analog sensor or tamper channels where appropriate. The 50 MHz Arm Cortex-M0 core allows event handling, debounce logic, and protocol tasks to execute predictably, and 8 KB of SRAM is sufficient for compact message queues and control state. For battery-backed systems, evaluate the controller’s low-power modes and wake behavior directly in the LPC11xx documentation. Security also requires correct handling of stored keys, fault indicators, and communications, not merely sufficient computational performance for the basic alarm routine.
추천
Compact Sensor Nodes
The LPC1114FHI33/302 supports compact sensor nodes that combine an analog input, local decision logic, and a serial communications link. The integrated 8-channel, 10-bit ADC can acquire basic sensor signals without a separate converter, while the 28 I/O pins allow status LEDs, interlocks, and external interface signals. The Cortex-M0 core’s 50 MHz ceiling and 8 KB of SRAM are appropriate for moderate filtering and protocol overhead rather than demanding edge analytics. Choose the device when local preprocessing, deterministic control, and low system complexity matter more than very large application storage. Validate the sensor signal range, converter settling requirements, and communication timing against the NXP electrical and peripheral specifications before finalizing the board.
추천
Industrial Automation Modules
The LPC1114FHI33/302 is well suited to small industrial automation modules that perform local sequencing, machine-interface control, analog supervision, and status reporting. The 32-bit Cortex-M0 core at up to 50 MHz can manage multiple timers, communication tasks, and control logic, while the 28-I/O pin count supports digital field interfaces. Its 8-channel 10-bit ADC provides basic process monitoring, and the -40 °C to +85 °C rated variant targets industrial ambient conditions. Industrial qualification status must not be inferred from that temperature range, so regulatory, EMC, and reliability requirements should be assessed separately. The HVQFN package helps achieve compact modules but requires assembly controls and a grounded thermal design around the exposed pad.
추천
USB-to-Serial Interface and Embedded Hubs
The LPC1114FHI33/302 can serve as the controller in a compact protocol bridge, configuration adapter, or multi-port embedded interface hub. Its 32-bit core handles framing and control tasks, 32 KB Flash stores firmware and descriptors, and 8 KB SRAM supports packet buffers for modest data rates. The 28 I/O pins can support multiple UART, SPI, or I2C endpoints, depending on the device peripheral assignment and multiplexing rules. Firmware must enforce timing, flow control, and fault recovery rather than assuming every logical function maps to a fixed pin. The small 5 x 5 mm HVQFN package supports compact modules, although USB data routing, ESD protection, and high-speed signal integrity require a separate board-level design review.
추천
추천 제품 요약
엔지니어링 참조 데이터: LPC1114FHI33/302 — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | LPC1114FHI33/303 | LPC1114FHN33/302 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (5x5) | 32-HVQFN (5x5) | 32-HVQFN (5x5) |
| CPU Core | Arm Cortex-M0 | Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 50 MHz | 50 MHz | 50 MHz |
| Program Memory | 32 KB Flash | 32 KB Flash | 32 KB Flash |
| SRAM | 8 KB | 8 KB | 8 KB |
| ADC | 8-channel, 10-bit | 8-channel, 10-bit | 8-channel, 10-bit |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | -40 °C to +85 °C |
| Ordering-Code Difference | LPC1114FHI33/302 | /303 ROM configuration | FHN ordering code |
| I/O Pin Count | 28 pins | 28 pins | 28 pins |
주요 차별점
- Exact /302 configuration availability (vs LPC1114FHI33/303)
- Same documented LPC1114 performance class (vs LPC1114FHN33/302)
- Compact 32-HVQFN integration (vs LPC1114FHI33/303)
설계 노트
Use the official NXP HVQFN32 land pattern rather than scaling a generic QFN footprint. Match the 0.5 mm lead pitch, 5 x 5 mm body dimensions, exposed-pad dimensions, solder-mask opening, and paste-aperture recommendations. Route decoupling capacitors directly to the relevant power and ground pins, and connect the exposed pad to the intended ground or thermal plane according to the package drawing.
Separate analog inputs from switching or high-current digital paths, and keep the ADC ground reference return close to the device. Use a continuous ground reference beneath the MCU where practical, minimize loop area around decoupling components, and place the crystal or clock circuitry according to the LPC11xx hardware design guidance. These measures reduce coupling into the 10-bit ADC and reduce timing uncertainty in the 50 MHz control loop.
Do not treat LPC1114FHI33/302, LPC1114FHI33/303, and LPC1114FHN33/302 as interchangeable solely because their order codes look similar. Verify the complete ordering table, boot-ROM identity, pin multiplex differences, flash programming procedure, and exposed-pad connection before using a replacement. After substitution, rebuild with the exact device selection in LPCXpresso or Arm Keil and perform reset, clock, bootloader, and peripheral tests.
규정 준수 정보
The available product records identify the device as active and specify its environmental operating range, but they do not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations.