NXP Semiconductors

LPC11U67JBD64551 - 50MHz Cortex-M0+ MCU | NXP

MPN: LPC11U67JBD64551 ✓ Aktif
64-LQFP (10 mm x 10 mm) Package 50 MHz Speed 128 KB (128K x 8 bits) Memory
MOQ: 1 |
Datasheet Tidak Dapat Ditemui Cari Atashef
Lihat Alternatif

LPC11U67JBD64551 Ringkasan

The NXP Semiconductors LPC11U67JBD64551 is a 32-bit, single-core ARM Cortex-M0+ microcontroller operating up to 50 MHz, with 128 KB of flash memory in a 64-pin LQFP package measuring 10 mm by 10 mm. It belongs to the LPC11Uxx family of low-power embedded microcontrollers designed for compact control, sensing, and communication-oriented products.

An ARM Cortex-M0+ microcontroller is a reduced-instruction-set processor core integrated with memory, peripherals, and communication interfaces on one semiconductor device. The Cortex-M0+ hierarchy places the part within embedded processors, microcontrollers, and the broader semiconductor category. Its 32-bit architecture and 50 MHz maximum clock rate provide useful processing performance for control tasks while retaining a compact, energy-conscious design footprint.

The LPC11U67JBD64551 provides 128 KB of flash memory, organized as 128K by 8 bits, for firmware storage. Its 64-LQFP package supports surface-mount assembly and exposes the device's interface pins on a standardized 10 mm by 10 mm footprint. These characteristics make the MCU suitable for embedded control boards, sensor nodes, industrial modules, and compact consumer devices that require more program storage than a small entry-level microcontroller.

The LPC11U67 designation identifies the device within the LPC11U family, while the full ordering code LPC11U67JBD64551 identifies the exact configuration offered for sourcing. The listing identifies the component as an NXP USA Inc. LPC11Uxx microcontroller with an ARM Cortex-M0+ core, single-core architecture, 50 MHz operating frequency, 128 KB flash, and 64-LQFP package. Detailed memory-map, peripheral, electrical, and programming information should be confirmed against the NXP device documentation before a new design is released.

Typical applications include low-power sensor hubs, building and industrial control modules, compact motor-control boards, communications equipment, and embedded accessories. The 128 KB flash capacity allows more application code and configuration data than very small microcontroller variants, while the 10 mm by 10 mm LQFP package simplifies inspection, hand rework, and prototype-board assembly compared with leadless packages.

Designers should treat the LPC11U67JBD64551 as a surface-mount embedded device rather than a simple logic component. Confirm the exact pin assignment, peripheral availability, voltage limits, clock configuration, programming interface, decoupling requirements, and exposed-pad requirements in the official device documentation. Keep sensitive programming and debug connections accessible, and follow the recommended decoupling and layout patterns to preserve signal integrity and reliable startup.

This product page consolidates the exact orderable MPN, source-backed core and package information, sourcing guidance, and practical replacement considerations. It also distinguishes the standard LPC11U67 ordering options from unrelated Cortex-M0+ devices, helping engineers avoid cross-platform substitutions that may fit a similar application but do not preserve the target's package, pinout, firmware environment, and peripheral configuration.

Pilihan pengganti yang segera untuk LPC11U67JBD64551 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.

Varietas dalam siri ini

Model serupa yang kompatibel dengan pengganti yang segera LPC11U67JBD64551 (sama faktor bentuk dan kaki) — berbeza dalam Flash Memory, Product Type.

NXP Semiconductors
Flash Memory: 128 KB (128K x 8)
Product Type: 32-bit ARM Cortex-M0+ microcontroller
Bandingkan Dengan LPC11U67JBD64551 →

LPC11U67JBD64E

✅ Masuk Drop-In
NXP Semiconductors
📦 64-LQFP (10 mm x 10 mm)
32-bit ARM Cortex-M0+ microcontroller · NXP Semiconductors · 50 MHz · ARM Cortex-M0+ · 32 bit · 128 KB (128K x 8)

Hubungi untuk harga

Lihat Datasheet →

LPC11U67JBD64E

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
NXP Semiconductors
📦 64-LQFP (10 mm x 10 mm)
32-bit ARM Cortex-M0+ microcontroller · NXP Semiconductors · 50 MHz · ARM Cortex-M0+ · 32 bit · 128 KB (128K x 8)

Hubungi untuk harga

Lihat Datasheet →

LPC11U67JBD64X

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-LQFP (10 mm x 10 mm)
Same-family 50 MHz Cortex-M0+ and 128 KB flash configuration; ordering suffix differs by 0% in the identified core parameters

📋 Alternatif rujukan (tidak dalam katalog)

LPC11U67JBD64XI

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-LQFP (10 mm x 10 mm)
Same-family 50 MHz Cortex-M0+ and 128 KB flash configuration; ordering suffix differs by 0% in the identified core parameters

📋 Alternatif rujukan (tidak dalam katalog)

LPC11U67JBD645

✅ Masuk Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 64-LQFP (10 mm x 10 mm)
Same-family 50 MHz Cortex-M0+ and 128 KB flash configuration; final ordering characters differ by 0% in the identified core parameters

📋 Alternatif rujukan (tidak dalam katalog)

LPC11U67JBD64551 Penilaian maksimum & Ciri-ciri Elektrik

Product Type 32-bit single-core microcontroller
Processor Core ARM Cortex-M0+
Architecture 32-bit ARM
Maximum CPU Frequency 50 MHz
Flash Memory 128 KB (128K x 8 bits)
Core Count 1 core
Kemasan 64-LQFP (10 mm x 10 mm)
Kiraan Pin 64 pins
Jenis Pemasangan Surface mount

Panduan Konfigurasi Pin LPC11U67JBD64551 64-lqfp (10 mm x 10 mm)

Konfigurasi pin untuk LPC11U67JBD64551 (64-lqfp (10 mm x 10 mm) pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.

Garis bentuk pengecah pakai 64-lqfp (10 mm x 10 mm) untuk LPC11U67JBD64551

Tiada data garisan pin yang diperoleh untuk LPC11U67JBD64551.

Rujuk kepada lembaran data untuk konfigurasi pin penuh.

Aplikasi Biasa

LPC11U67JBD64551 patut untuk 6 aplikasis: Industrial Sensor Hub, Smart Building Controller, Compact Motor-Control Module, IoT Communications Gateway, Consumer Appliance Interface, Portable Measurement Device.

🏭

Industrial Sensor Hub

The LPC11U67JBD64551 fits compact sensor-hub controllers that acquire measurements, filter data, and communicate results over a local serial interface. Its 50 MHz ARM Cortex-M0+ core provides ample instruction throughput for typical acquisition, thresholding, and protocol tasks, while 128 KB of flash stores application firmware, calibration tables, and configuration data. The 10 mm by 10 mm 64-LQFP package also permits a conventional surface-mount layout with accessible perimeter pins for programming and service connectors.

🧩

Smart Building Controller

The LPC11U67JBD64551 is suitable for building-control modules that combine inputs, local logic, and status communication. A 50 MHz Cortex-M0+ processor can execute event handling and control routines, and the 128 KB flash capacity accommodates application code and configuration parameters without relying on external program memory. Its 64-LQFP format supports automated assembly and inspection, while the exposed perimeter provides straightforward routing for serial communications, sensing interfaces, and logic-level control signals.

🔧

Compact Motor-Control Module

The LPC11U67JBD64551 can serve as the supervisory controller in a compact motor-control or actuator module. The 50 MHz Cortex-M0+ core is appropriate for executing state machines, interpreting commands, and coordinating protection logic, while 128 KB of flash provides room for control algorithms and fault-handling routines. The 64-LQFP package leaves visible pins on all four sides, making power, ground, communications, and discrete control connections straightforward to route on a multilayer board.

🌐

IoT Communications Gateway

The LPC11U67JBD64551 fits small IoT gateway boards that translate between local sensors and an upstream network connection. Its 32-bit Cortex-M0+ core running up to 50 MHz can process framing, device state, and protocol tasks, and its 128 KB flash provides sufficient storage for embedded firmware. The 10 mm by 10 mm LQFP package supports dense, serviceable assemblies, although radio and network transceivers must be implemented separately and validated alongside the MCU.

📱

Consumer Appliance Interface

The LPC11U67JBD64551 can manage a consumer appliance's local control panel, button inputs, indicators, and service interface. The 50 MHz processor provides ample performance for menu logic, state management, and fault reporting, while 128 KB of flash supports production firmware and calibration parameters. Its surface-mount 64-LQFP package is practical for high-volume assembly and simplifies mechanical inspection compared with a fine-pitch leadless package.

📱

Portable Measurement Device

The LPC11U67JBD64551 is suitable for a portable measurement instrument that combines a sensor front end with local display or communications. The 32-bit Cortex-M0+ core can execute sampling coordination and numerical processing at up to 50 MHz, while 128 KB of flash stores firmware, configuration, and calibration records. The compact 10 mm by 10 mm LQFP package supports space-constrained assemblies, and its four-sided pin arrangement eases access to programming, power, and interface connections.

What is the LPC11U67JBD64551?
The LPC11U67JBD64551 is an NXP Semiconductors 32-bit, single-core ARM Cortex-M0+ microcontroller rated up to 50 MHz. According to the NXP product listing reproduced by NXP USA Inc. distributor records, it includes 128 KB of flash memory configured as 128K by 8 bits and is packaged in a 64-LQFP measuring 10 mm by 10 mm. It is intended for compact embedded systems requiring more code storage than the smallest microcontroller variants.
What are the key specifications of LPC11U67JBD64551?
The key LPC11U67JBD64551 specifications are a 32-bit ARM Cortex-M0+ processor core, one processing core, a 50 MHz maximum clock rate, and 128 KB of flash memory. The source-backed package is a 64-pin LQFP with a 10 mm by 10 mm body. According to the NXP listing information, these values define an embedded MCU intended for compact control, sensing, communications, and industrial module applications.
Where can I download the LPC11U67JBD64551 datasheet?
The LPC11U67JBD64551 datasheet should be obtained from NXP using the exact full MPN LPC11U67JBD64551 or the LPC11U67 family documentation. The available datasheet index identifies LPC11U67 documentation, but it does not expose a direct manufacturer PDF link. Use the Request a Quote form on this page for exact-document and sourcing support, and confirm revision currency against the NXP product page before releasing the design.
Where can I find the LPC11U67JBD64551 pinout?
The LPC11U67JBD64551 pinout is found in the NXP LPC11U67 device documentation under the 64-LQFP pin-description and package-outline sections. The exact device uses a 64-pin LQFP package measuring 10 mm by 10 mm. Use that pin table when assigning board tracks and programming signals, because package variants can differ in exposed connections and pin multiplexing even when they share the LPC11U67 family name.
Is LPC11U67JBD64551 a 50 MHz ARM Cortex-M0+ microcontroller?
Yes, the LPC11U67JBD64551 is specified as a 50 MHz ARM Cortex-M0+ microcontroller. The NXP-related product records also identify it as a 32-bit, single-core device with 128 KB of flash memory. The 50 MHz figure is the maximum processor frequency and should be evaluated against the selected clock source, power mode, operating voltage, and required peripheral performance during system design.
What memory does the LPC11U67JBD64551 contain?
The LPC11U67JBD64551 contains 128 KB of flash memory, expressed as 128K by 8 bits. According to the NXP listing specification, this is its identified programmable nonvolatile storage resource. The RAM capacity and other memory-map details are not stated in the product listing, so consult the NXP LPC11U67 device documentation before finalizing firmware sizing, linker configuration, and stack allocation.
Where can I buy LPC11U67JBD64551 online?
The LPC11U67JBD64551 can be requested through the Request a Quote form on this XAIPART page using the exact MPN. Current stock, minimum order quantity, and delivery timing are not quoted as fixed figures on this page. The exact orderable configuration is also identified as an NXP USA Inc. part offered through Rochester Electronics channels, so confirm provenance and traceability when placing an order.
What is the price of LPC11U67JBD64551?
The current unit price for LPC11U67JBD64551 should be obtained through the Request a Quote form on this page rather than from a static listing. The exact device is represented by the full ordering code LPC11U67JBD64551, and related LPC11U67 configurations may have different procurement terms. Submit the required quantity, package, and target date with the quote request to receive the applicable commercial response.
What is the lead time for LPC11U67JBD64551?
The lead time for LPC11U67JBD64551 depends on current supplier inventory, procurement quantity, traceability requirements, and the requested delivery date. Use the Request a Quote form on this page with your quantity and schedule so the order can be checked against the exact full MPN. Do not infer availability from a distributor product page, because the order code and supply channel must be confirmed together.
Is LPC11U67JBD64551 in stock?
Stock for LPC11U67JBD64551 should be confirmed through the Request a Quote form on this page with the required quantity and delivery schedule. The device is listed in source-backed catalogs under the exact MPN and is offered through Rochester Electronics channels, but those records do not establish a guaranteed, immediately allocatable quantity. A written quotation and order acknowledgment provide the appropriate transactional confirmation.
What can replace the LPC11U67JBD64551?
The closest drop-in replacement is an LPC11U67 configuration with the same 64-LQFP footprint, 50 MHz Cortex-M0+ core, and 128 KB flash configuration. LPC11U67JBD64E is the source-backed same-family option for comparison. Confirm the ordering suffix, temperature grade, pin functions, exposed-pad treatment, and approved-part status before substitution because firmware image selection and production qualification can depend on the exact order code.
Can LPC11U67JBD64E replace LPC11U67JBD64551?
LPC11U67JBD64E is the closest source-backed candidate because its listing identifies the same 50 MHz ARM Cortex-M0+ architecture, 128 KB flash memory, and 64-LQFP package. It is therefore a same-family drop-in candidate at the core, memory, and footprint level. Final approval still requires checking the exact ordering-code meaning, pin table, temperature grade, programming configuration, and lifecycle status for both devices.
LPC11U67JBD64551 vs LPC11U67JBD64E - which is better for an embedded controller?
LPC11U67JBD64E is the better match when its ordering suffix matches the production requirements because both devices are identified as 50 MHz, single-core Cortex-M0+ MCUs with 128 KB flash in a 64-LQFP package. The verified records do not establish a functional difference between the ordering codes, so choose based on traceability, temperature grade, supply status, and manufacturer documentation rather than processing performance.
When should I choose LPC11U67JBD64551 instead of LPC11U67JBD64E?
Choose LPC11U67JBD64551 when that exact source-backed orderable configuration is required for qualification, traceability, approved BOM control, or an existing platform. Choose LPC11U67JBD64E when its ordering suffix satisfies those requirements and it offers a better supply position. Both are described as 50 MHz Cortex-M0+ devices with 128 KB flash in the same 64-LQFP family package.
Is LPC11U67JBD64551 suitable for industrial and IoT applications?
The LPC11U67JBD64551 is architecturally suitable for compact IoT, industrial control, sensor-node, and communications modules because it provides a 50 MHz 32-bit Cortex-M0+ core, 128 KB flash, and a 10 mm by 10 mm surface-mount LQFP package. Qualification for a specific industrial product still depends on temperature grade, applicable operating requirements, peripheral verification, and the certification status of the complete product.

Data referensi kejuruteraan untuk LPC11U67JBD64551 — perbandingan, panduan rancangan, dan maklumat kesediaan

Panduan Pilihan

Choose LPC11U67JBD64551 when your approved design, firmware configuration, or supply documentation specifies that exact full MPN. Its defining attributes are a 50 MHz single-core ARM Cortex-M0+ processor, 128 KB flash, and a 64-LQFP package measuring 10 mm by 10 mm. Choose LPC11U67JBD64E when its ordering suffix matches all temperature, packaging, and qualification requirements and the supply channel offers a better production position. The remaining LPC11U67JBD64, JBD64X, JBD64XI, and JBD645 configurations are same-family drop-in candidates because they retain the identified core, flash capacity, and package, but each ordering suffix must be checked against the manufacturer ordering information before approval. A microcontroller from another manufacturer should not be assumed to be interchangeable merely because it also uses a Cortex-M0+ core; peripheral mapping, pin multiplexing, programming, memory organization, and qualification usually differ.

Perbandingan dengan Gantian

Parametr Produk Ini LPC11U67JBD64E LPC11U67JBD64 LPC11U67JBD64X LPC11U67JBD64XI LPC11U67JBD645
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm) 64-LQFP (10 mm x 10 mm)
Processor Core ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+ ARM Cortex-M0+
Maximum CPU Frequency 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz 50 MHz
Flash Memory 128 KB (128K x 8 bits) 128 KB (128K x 8 bits) 128 KB 128 KB 128 KB 128 KB
Architecture Width 32-bit 32-bit 32-bit 32-bit 32-bit 32-bit
Core Count 1 core 1 core 1 core 1 core 1 core 1 core
Ordering Suffix JBD64551 JBD64E JBD64 JBD64X JBD64XI JBD645

Penyeberangsung Jelas

  • Exact source-backed NXP ordering configuration (vsLPC11U67JBD64E)
  • No stated core-performance penalty (vsLPC11U67JBD64)
  • Common 64-LQFP footprint (vsLPC11U67JBD64X)
  • Same-family software architecture (vsLPC11U67JBD64XI)

Catatan Desain

Route the MCU power rails through short, low-impedance paths and place the required bypass capacitors close to their associated supply pins according to the NXP hardware design guidance. Keep switching-regulator output and high-current return paths away from sensitive clock, programming, and communications traces. The 10 mm by 10 mm LQFP also benefits from adequate clearance around all four package sides for inspection, rework, and compatible test fixtures.

Assign the programming and debug interface early in schematic capture so the footprint, connector orientation, and signal routing can be planned without board-edge conflicts. Preserve access to reset and boot-control functions, and avoid routing fast or switching signals beneath the MCU unless the stack-up and return path have been evaluated. Confirm the 64-pin package dimensions, pin-one orientation, and land pattern from the official package drawing before releasing artwork.

Do not select an alternative solely because its order code contains LPC11U67 and 64. Verify the core frequency, flash configuration, pin assignment, temperature grade, package dimensions, exposed-pad requirements, and approved-part status for the exact suffix. Firmware image selection and qualification records may distinguish otherwise similar ordering codes, so a hardware drop-in substitution still requires an engineering change review.

Review each peripheral interface for signal-integrity and timing requirements rather than relying only on the nominal 50 MHz processor clock. Keep external clocks short, observe required setup and hold timing, and add series termination only where the complete driver and load path support it. For communications routed beyond the PCB, use appropriate protection and isolation methods and validate them across the intended voltage, temperature, and electromagnetic environment.

Maklumat Kesediaan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Bosong logam timbal
Unknown
Bosong halogen
Unknown
Mineral konflik
Unknown

Compliance information is not stated in the product listing or technical records and requires confirmation from the official NXP documentation.

Data disahkan pada: 2026-11-20 — data yang disahkan dan disusun semula oleh pasukan kejuruteraan komponen XAIPART

Pencarian Berhubungan

LPC11U67JBD64551 LPC11U67JBD64551 datasheet LPC11U67JBD64551 specifications LPC11U67JBD64551 pinout LPC11U67JBD64551 pinout 64-LQFP LPC11U67JBD64551 equivalent LPC11U67JBD64551 replacement LPC11U67JBD64551 vs LPC11U67JBD64E LPC11U67JBD64551 price LPC11U67JBD64551 stock NXP LPC11U67JBD64551 LPC11U67 50MHz Cortex-M0+ 128KB LPC11U67 64-LQFP 10x10 LPC11U67 industrial controller LPC11U67 IoT sensor module

Komponen dan Tanda berkaitan

NXP Semiconductors LPC11U67JBD64551 LPC11U67JBD64E LPC11U67JBD64 LPC11U67JBD64X LPC11U67JBD64XI LPC11U67JBD645 LPC11Uxx ARM Cortex-M0+ ARM Cortex-M0+ microcontroller 32-bit microcontroller embedded microcontroller microcontroller IC semiconductor 50 MHz clock rate 128 KB flash memory 64-LQFP LQFP package family 10 mm by 10 mm package surface-mount device industrial control IoT sensor node embedded firmware RoHS REACH
RFRC Saring Pantas
Isikan butiran lengkap — pasukan jualan kami akan bertindak balas dalam masa 24 jam
Nombor Bahagian Pengeluar Pakej QTY Harga Target Lengkap
✓
Pesan diskon sudah disubmit!

Kami akan bertindak balas kepada emel anda dalam tempoh 24 jam

1
RFQ Diserahkan
2
kutipan Diterima
3
Order Dipesan
4
Pembayaran
5
Dihantar
6
Diantar
Lihat Perincian RFQ