LPC2194HBD64 - 60MHz ARM7 MCU with 256KB Flash | NXP
MPN: LPC2194HBD64 ✗ Akhir HayatLPC2194HBD64 Ringkasan
An ARM7TDMI-S microcontroller is a 32-bit reduced-instruction-set-computing core intended for embedded control. In the product hierarchy, the LPC2194HBD64 is a microcontroller, a semiconductor, and a member of NXP's LPC2000 general-purpose ARM7 family. Its real-time emulation and embedded trace features support hardware-assisted debugging, while the alternative 16-bit Thumb instruction mode can reduce code size in applications where memory density is important.
The device provides 256 KB of program flash for firmware, 16 KB of SRAM for working data, and 60 MHz operation. Its 128-bit memory interface and accelerator architecture allow 32-bit code to execute efficiently at the maximum clock rate. Four CAN channels support controller-area-network communication, while the 10-bit ADC provides an integrated path for analog measurement. A 46-I/O budget allows substantial connection to external sensors, actuators, displays, and communication transceivers.
Communication peripherals are central to the LPC2194HBD64 architecture. The CAN implementation is compatible with CAN specification 2.0B and ISO 11898-1, and the Keil LPC2194 datasheet excerpt identifies support for data rates up to 1 Mbit/s on each bus. The CAN acceptance filter supports both 11-bit and 29-bit receive identifiers, including FullCAN-style automatic reception for selected standard identifiers. This combination reduces host-side protocol overhead in multi-node systems.
Typical uses include CAN gateways, industrial automation controllers, motor and actuator controllers, building automation equipment, instrumentation, and CAN-connected data acquisition units. Four CAN channels allow a controller to bridge several independently terminated networks while maintaining local timing and control functions. The ADC and PWM resources also support closed-loop measurement, monitoring, and power conversion without requiring separate interface ICs for every function.
Designers should pay close attention to the 64-LQFP footprint, 10 x 10 mm dimensions, pin multiplexing, and the distinct requirements of the ARM7TDMI-S debug and memory interface. Board layouts should preserve the datasheet-recommended decoupling and clock arrangement, while firmware should account for the peripheral pin-connect options and the device's power, reset, and boot configuration. Because this is a legacy ARM7 product, firmware tooling, documentation, and long-term availability should be assessed before starting a new design.
This page combines the manufacturer product information, datasheet characteristics, lifecycle context, package details, and verified alternatives into an engineering-focused reference. It also identifies where a true pin-compatible replacement must be validated rather than treating broadly similar ARM7 or CAN microcontrollers as drop-in equivalents.
Pilihan pengganti yang segera untuk LPC2194HBD64 — sama paket, pin-pin kompatibel. Bahagian paket yang berbeza memerlukan kerja ulang PCB diasingkan.
LPC2194HBD64/01
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LPC2194HBD64-S
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LPC2194HBD64/01,15
✅ Masuk Drop-In📋 Alternatif rujukan (tidak dalam katalog)
LPC2194HBD64 Penilaian maksimum & Ciri-ciri Elektrik
| Product Type | 16/32-bit ARM7TDMI-S microcontroller |
| Maximum CPU Frequency | 60 MHz |
| On-Chip Flash Memory | 256 KB |
| Flash Programming | ISP/IAP |
| On-Chip SRAM | 16 KB |
| CPU Architecture | ARM7TDMI-S |
| Instruction Set | 16/32-bit ARM with 16-bit Thumb mode |
| Memory Interface Width | 128 bit |
| ADC Resolution | 10 bit |
| CAN Channel Count | 4 channels |
| Maximum CAN Data Rate | 1 Mbit/s per bus |
| CAN Compatibility | CAN 2.0B and ISO 11898-1 |
| Programmable I/O Pins | 46 pins |
| Kemasan | 64-LQFP, 10 x 10 mm |
| Debug Support | Real-time emulation and embedded trace |
| Boundary Scan | Supported |
Panduan Konfigurasi Pin LPC2194HBD64 64-lqfp, 10 x 10 mm
Konfigurasi pin untuk LPC2194HBD64 (64-lqfp, 10 x 10 mm pakai). IC digital ini termasuk GPIO, antaramuka komunikasi (UART, SPI, I2C), dan pin kuasa. Rujuk dokumen pengeluar untuk fungsi pin alternatif dan opsi konfigurasi. Biasa digunakan dalam rancangan sistem ter嵌入式 dan PCB.
Tiada data garisan pin yang diperoleh untuk LPC2194HBD64.
Rujuk kepada lembaran data untuk konfigurasi pin penuh.
Aplikasi Biasa
LPC2194HBD64 patut untuk 6 aplikasis: CAN Gateway Controller, Industrial Automation Controller, Automotive Telematics Unit, Data Acquisition and Instrumentation, Motor and Actuator Control, Building Automation Equipment.
CAN Gateway Controller
The LPC2194HBD64 fits a CAN gateway because four CAN channels can terminate multiple independent vehicle or industrial networks while the 60 MHz ARM7TDMI-S core handles routing and supervisory logic. The manufacturer datasheet identifies CAN 2.0B and ISO 11898-1 compatibility, operation up to 1 Mbit/s per bus, and acceptance filtering for 11-bit and 29-bit identifiers. Its 256 KB of flash accommodates gateway firmware, protocol conversion tables, diagnostics, and configuration storage. The 16 KB SRAM supports buffering between network frames and application-level processing. A practical implementation still requires external CAN transceivers, correct bus termination, isolated or protected routing, and a PCB layout that keeps high-current transceiver paths away from sensitive controller signals.
Disebarkan
Industrial Automation Controller
The LPC2194HBD64 is appropriate for industrial automation equipment that combines deterministic CAN communication with local control and analog measurement. Its 60 MHz ARM7TDMI-S processor provides computational headroom for control loops, while 46 programmable I/O pins can connect discrete sensors, actuators, status indicators, and external interface circuits. The integrated 10-bit ADC supports process measurement without requiring a dedicated analog converter on every channel. With 256 KB of ISP/IAP flash, firmware can implement control, communication, diagnostics, and data logging in one device. The 16 KB SRAM is useful for short task buffers, although designers should allocate stack space carefully and confirm interrupt timing against the selected operating frequency and peripheral configuration.
Disebarkan
Automotive Telematics Unit
The LPC2194HBD64 supports legacy automotive telematics and body electronics designs that require multiple CAN networks, local diagnostics, and embedded control in one controller. Four CAN channels reduce the need for separate communication controllers, while the 60 MHz ARM7TDMI-S core can supervise message routing, vehicle inputs, and diagnostic functions. Its 256 KB of flash provides room for application firmware and CAN network databases, and the 10-bit ADC can serve monitoring channels. Before deployment, engineers must verify the exact suffix's temperature and qualification requirements against the vehicle environment. The external design should include protected CAN transceivers, robust power regulation, proper grounding, and electromagnetic-compatibility validation appropriate to the vehicle platform.
Disebarkan
Data Acquisition and Instrumentation
The LPC2194HBD64 can serve as the control and communications core of a data-acquisition instrument because it combines a 10-bit ADC, 256 KB of program flash, 16 KB of SRAM, and CAN connectivity. The ADC handles sensor inputs, while the processor performs calibration, filtering, status reporting, and data packaging. Its 46 programmable I/O pins provide enough parallel connectivity for front-panel controls, digital sensors, displays, and alarm outputs without duplicating the MCU. For higher-resolution or faster measurements, an external converter can be connected through the available bus and GPIO resources. The design should include input protection, careful analog grounding, reference-voltage stability, and separate analog and digital return-current management to preserve measurement quality.
Disebarkan
Motor and Actuator Control
The LPC2194HBD64 is suitable for embedded motor and actuator control where local PWM, feedback, and CAN coordination are required. Its PWM resources can command power stages, while the 10-bit ADC can supervise current, temperature, or position-related analog signals. The 60 MHz ARM7TDMI-S core provides enough instruction throughput for sequencing, fault handling, and communication alongside a real-time control loop. Sixteen kilobytes of SRAM can hold control variables and short communication buffers, and 256 KB of flash accommodates a complete application. Pin multiplexing and peripheral clock requirements must be reviewed before assigning the 46 I/O pins. Power-stage drivers should remain separate from the MCU supply architecture, with fault signals routed to suitable interrupt-capable pins and thermal design verified at the system level.
Disebarkan
Building Automation Equipment
The LPC2194HBD64 can be applied to building automation controllers that coordinate distributed sensors, actuators, and service buses. Four CAN channels support segmented communication networks, while the 10-bit ADC can monitor environmental or equipment feedback signals. The 60 MHz core can execute scheduling, alarm logic, energy-control functions, and diagnostic routines, and 256 KB of flash is sufficient for embedded protocol handling and local configuration. The device's legacy status makes it most appropriate for sustaining an existing installation or using an established ARM7 software platform rather than initiating a broad new product family. Deployment should use isolated or protected communications where appropriate, secured firmware-update procedures, and careful separation between low-level communication returns and sensitive analog measurement paths.
Disebarkan
Ringkasan Produk Disebarkan
Data referensi kejuruteraan untuk LPC2194HBD64 — perbandingan, panduan rancangan, dan maklumat kesediaan
Panduan Pilihan
Perbandingan dengan Gantian
| Parametr | Produk Ini | LPC2194HBD64/01 | LPC2194HBD64-S | LPC2194HBD64/01,15 |
|---|---|---|---|---|
| Package | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) | 64-LQFP (10x10 mm) |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| CPU Core | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S | ARM7TDMI-S |
| Maximum CPU Frequency | 60 MHz | 60 MHz | 60 MHz | 60 MHz |
| Flash Memory | 256 KB | 256 KB | 256 KB | 256 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB |
| ADC Resolution | 10 bit | 10 bit | 10 bit | 10 bit |
| CAN Channels | 4 channels | 4 channels | 4 channels | 4 channels |
| Programmable I/O | 46 pins | 46 pins | 46 pins | 46 pins |
| Maximum CAN Data Rate | 1 Mbit/s per bus | 1 Mbit/s per bus | 1 Mbit/s per bus | 1 Mbit/s per bus |
| Ordering Qualification | Base LPC2194HBD64 designation | Suffixed ordering configuration | Suffixed ordering configuration | Suffixed ordering configuration |
Penyeberangsung Jelas
- Four integrated CAN channels (vsLPC2194HBD64/01)
- Established ARM7 memory and acceleration architecture (vsLPC2194HBD64-S)
- Broad peripheral integration in a compact package (vsLPC2194HBD64/01,15)
Catatan Desain
Assign the board from the official NXP LPC2194 pin-description table rather than from a generic ARM7 controller footprint. The LPC2194HBD64 uses a 64-LQFP package with alternate peripheral functions, dedicated analog inputs, clock signals, reset functions, and power pins. Keep the package orientation consistent with pin 1, provide the required decoupling directly at the supply pins, and route the 10-bit ADC inputs away from switching nodes and high-current return paths to preserve signal integrity.
Follow the manufacturer clock and reset layout recommendations because timing margins can be affected by clock routing, return current, and nearby noise sources. The device supports real-time emulation and embedded trace, so preserve access to the debug interface for production diagnosis. For CAN-connected boards, use short, continuous return paths beneath transceiver signals and isolate high-current switching loops from the MCU and analog sections. Validate bus timing with the intended transceiver, cable, termination, and maximum node count rather than relying only on nominal controller timing.
Do not assume that every LPC2194 orderable suffix is production-equivalent merely because the package and headline memory values match. Before substituting LPC2194HBD64/01, LPC2194HBD64-S, or LPC2194HBD64/01,15, check the complete NXP ordering information for temperature grade, clock limit, qualification, and lifecycle conditions. This is especially important for automotive or industrial deployments because a package-compatible ordering code can still impose different environmental or production requirements.
Design the supply network and decoupling around the manufacturer's LPC2194 electrical limits rather than generic assumptions. The ADC reference and analog supply requirements may differ from the digital core supply, and their connections must follow the datasheet's recommended network. Use local bulk and high-frequency decoupling where directed, maintain a low-impedance return path, and verify startup and power-supply sequencing against the selected reset method. If the device replaces another MCU, check rail ramp rates and brownout behavior rather than preserving the original board without review.
Maklumat Kesediaan
The exact LPC2194HBD64 compliance declarations could not be established from the manufacturer product-page and datasheet excerpts. Qualification status must be checked for the selected ordering suffix before use in automotive or other regulated environments.