NXP Semiconductors

LPC2194HBD64 - 60MHz ARM7 MCU with 256KB Flash | NXP

MPN: LPC2194HBD64 ✗ סוף ייצור
64-LQFP, 10 x 10 mm Package 60 MHz Speed 256 KB Memory
כמות הזמנה מינימלית: 1 |

LPC2194HBD64 סקירה

The NXP LPC2194HBD64 is a 16/32-bit ARM7TDMI-S microcontroller operating at up to 60 MHz, with 256 KB of embedded ISP/IAP flash and 16 KB of on-chip SRAM in a 64-LQFP 10 x 10 mm package. It integrates a 10-bit ADC, CAN connectivity, PWM, and a 128-bit memory interface with accelerator architecture for high-speed 32-bit execution. The LPC2194HBD64 combines 46 programmable I/O pins with a substantial set of embedded peripherals, making it suitable for industrial control, automotive gateway, data acquisition, and CAN-connected equipment.

An ARM7TDMI-S microcontroller is a 32-bit reduced-instruction-set-computing core intended for embedded control. In the product hierarchy, the LPC2194HBD64 is a microcontroller, a semiconductor, and a member of NXP's LPC2000 general-purpose ARM7 family. Its real-time emulation and embedded trace features support hardware-assisted debugging, while the alternative 16-bit Thumb instruction mode can reduce code size in applications where memory density is important.

The device provides 256 KB of program flash for firmware, 16 KB of SRAM for working data, and 60 MHz operation. Its 128-bit memory interface and accelerator architecture allow 32-bit code to execute efficiently at the maximum clock rate. Four CAN channels support controller-area-network communication, while the 10-bit ADC provides an integrated path for analog measurement. A 46-I/O budget allows substantial connection to external sensors, actuators, displays, and communication transceivers.

Communication peripherals are central to the LPC2194HBD64 architecture. The CAN implementation is compatible with CAN specification 2.0B and ISO 11898-1, and the Keil LPC2194 datasheet excerpt identifies support for data rates up to 1 Mbit/s on each bus. The CAN acceptance filter supports both 11-bit and 29-bit receive identifiers, including FullCAN-style automatic reception for selected standard identifiers. This combination reduces host-side protocol overhead in multi-node systems.

Typical uses include CAN gateways, industrial automation controllers, motor and actuator controllers, building automation equipment, instrumentation, and CAN-connected data acquisition units. Four CAN channels allow a controller to bridge several independently terminated networks while maintaining local timing and control functions. The ADC and PWM resources also support closed-loop measurement, monitoring, and power conversion without requiring separate interface ICs for every function.

Designers should pay close attention to the 64-LQFP footprint, 10 x 10 mm dimensions, pin multiplexing, and the distinct requirements of the ARM7TDMI-S debug and memory interface. Board layouts should preserve the datasheet-recommended decoupling and clock arrangement, while firmware should account for the peripheral pin-connect options and the device's power, reset, and boot configuration. Because this is a legacy ARM7 product, firmware tooling, documentation, and long-term availability should be assessed before starting a new design.

This page combines the manufacturer product information, datasheet characteristics, lifecycle context, package details, and verified alternatives into an engineering-focused reference. It also identifies where a true pin-compatible replacement must be validated rather than treating broadly similar ARM7 or CAN microcontrollers as drop-in equivalents.

חלופות תחליף ישיר עבור LPC2194HBD64 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

LPC2194HBD64/01

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same 60 MHz ARM7TDMI-S, 256 KB flash, 16 KB SRAM, and 64-LQFP footprint; ordering suffix may change temperature or qualification conditions by 0%

📋 חלופה להתייחסות (לא בקטלוג)

LPC2194HBD64-S

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same LPC2194 256 KB-flash, 16 KB-SRAM and 64-LQFP family; production or qualification suffix may differ by 0% in stated key parameters

📋 חלופה להתייחסות (לא בקטלוג)

LPC2194HBD64/01,15

✅ Drop-In
📦 64-LQFP (10x10 mm)
Same 60 MHz ARM7 configuration, 256 KB flash, 16 KB SRAM, and 64-LQFP footprint; suffix conditions must be checked by 0%

📋 חלופה להתייחסות (לא בקטלוג)

LPC2194HBD64 דירוגים מרביים ומאפיינים חשמליים

Product Type 16/32-bit ARM7TDMI-S microcontroller
Maximum CPU Frequency 60 MHz
On-Chip Flash Memory 256 KB
Flash Programming ISP/IAP
On-Chip SRAM 16 KB
CPU Architecture ARM7TDMI-S
Instruction Set 16/32-bit ARM with 16-bit Thumb mode
Memory Interface Width 128 bit
ADC Resolution 10 bit
CAN Channel Count 4 channels
Maximum CAN Data Rate 1 Mbit/s per bus
CAN Compatibility CAN 2.0B and ISO 11898-1
Programmable I/O Pins 46 pins
מארז 64-LQFP, 10 x 10 mm
Debug Support Real-time emulation and embedded trace
Boundary Scan Supported

מדריך תצורת פינים של LPC2194HBD64 64-lqfp, 10 x 10 mm

תצורת פינים עבור LPC2194HBD64 (מארזת 64-lqfp, 10 x 10 mm). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.

תרשים פינים של מארזת 64-lqfp, 10 x 10 mm עבור LPC2194HBD64

אין נתוני פריסת פינים מפורטים עבור LPC2194HBD64.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

LPC2194HBD64 מתאים עבור 6 יישוםs: CAN Gateway Controller, Industrial Automation Controller, Automotive Telematics Unit, Data Acquisition and Instrumentation, Motor and Actuator Control, Building Automation Equipment.

🚗

CAN Gateway Controller

The LPC2194HBD64 fits a CAN gateway because four CAN channels can terminate multiple independent vehicle or industrial networks while the 60 MHz ARM7TDMI-S core handles routing and supervisory logic. The manufacturer datasheet identifies CAN 2.0B and ISO 11898-1 compatibility, operation up to 1 Mbit/s per bus, and acceptance filtering for 11-bit and 29-bit identifiers. Its 256 KB of flash accommodates gateway firmware, protocol conversion tables, diagnostics, and configuration storage. The 16 KB SRAM supports buffering between network frames and application-level processing. A practical implementation still requires external CAN transceivers, correct bus termination, isolated or protected routing, and a PCB layout that keeps high-current transceiver paths away from sensitive controller signals.

🏭

Industrial Automation Controller

The LPC2194HBD64 is appropriate for industrial automation equipment that combines deterministic CAN communication with local control and analog measurement. Its 60 MHz ARM7TDMI-S processor provides computational headroom for control loops, while 46 programmable I/O pins can connect discrete sensors, actuators, status indicators, and external interface circuits. The integrated 10-bit ADC supports process measurement without requiring a dedicated analog converter on every channel. With 256 KB of ISP/IAP flash, firmware can implement control, communication, diagnostics, and data logging in one device. The 16 KB SRAM is useful for short task buffers, although designers should allocate stack space carefully and confirm interrupt timing against the selected operating frequency and peripheral configuration.

🚗

Automotive Telematics Unit

The LPC2194HBD64 supports legacy automotive telematics and body electronics designs that require multiple CAN networks, local diagnostics, and embedded control in one controller. Four CAN channels reduce the need for separate communication controllers, while the 60 MHz ARM7TDMI-S core can supervise message routing, vehicle inputs, and diagnostic functions. Its 256 KB of flash provides room for application firmware and CAN network databases, and the 10-bit ADC can serve monitoring channels. Before deployment, engineers must verify the exact suffix's temperature and qualification requirements against the vehicle environment. The external design should include protected CAN transceivers, robust power regulation, proper grounding, and electromagnetic-compatibility validation appropriate to the vehicle platform.

🔧

Data Acquisition and Instrumentation

The LPC2194HBD64 can serve as the control and communications core of a data-acquisition instrument because it combines a 10-bit ADC, 256 KB of program flash, 16 KB of SRAM, and CAN connectivity. The ADC handles sensor inputs, while the processor performs calibration, filtering, status reporting, and data packaging. Its 46 programmable I/O pins provide enough parallel connectivity for front-panel controls, digital sensors, displays, and alarm outputs without duplicating the MCU. For higher-resolution or faster measurements, an external converter can be connected through the available bus and GPIO resources. The design should include input protection, careful analog grounding, reference-voltage stability, and separate analog and digital return-current management to preserve measurement quality.

⚡

Motor and Actuator Control

The LPC2194HBD64 is suitable for embedded motor and actuator control where local PWM, feedback, and CAN coordination are required. Its PWM resources can command power stages, while the 10-bit ADC can supervise current, temperature, or position-related analog signals. The 60 MHz ARM7TDMI-S core provides enough instruction throughput for sequencing, fault handling, and communication alongside a real-time control loop. Sixteen kilobytes of SRAM can hold control variables and short communication buffers, and 256 KB of flash accommodates a complete application. Pin multiplexing and peripheral clock requirements must be reviewed before assigning the 46 I/O pins. Power-stage drivers should remain separate from the MCU supply architecture, with fault signals routed to suitable interrupt-capable pins and thermal design verified at the system level.

🧩

Building Automation Equipment

The LPC2194HBD64 can be applied to building automation controllers that coordinate distributed sensors, actuators, and service buses. Four CAN channels support segmented communication networks, while the 10-bit ADC can monitor environmental or equipment feedback signals. The 60 MHz core can execute scheduling, alarm logic, energy-control functions, and diagnostic routines, and 256 KB of flash is sufficient for embedded protocol handling and local configuration. The device's legacy status makes it most appropriate for sustaining an existing installation or using an established ARM7 software platform rather than initiating a broad new product family. Deployment should use isolated or protected communications where appropriate, secured firmware-update procedures, and careful separation between low-level communication returns and sensitive analog measurement paths.

סיכום מוצרים מומלצים

LPC2194HBD64/01 Same LPC2194 configuration for qualified orderable variants בשימוש ב-: CAN Gateway Controller, Industrial Automation Controller, Automotive Telematics Unit, Data Acquisition and Instrumentation, Motor and Actuator Control, Building Automation Equipment LPC2194HBD64-S Same LPC2194 family in the 64-LQFP package בשימוש ב-: CAN Gateway Controller, Industrial Automation Controller, Automotive Telematics Unit, Data Acquisition and Instrumentation, Motor and Actuator Control, Building Automation Equipment
What is the NXP LPC2194HBD64?
The NXP LPC2194HBD64 is a 16/32-bit ARM7TDMI-S microcontroller with a maximum CPU frequency of 60 MHz, 256 KB of ISP/IAP flash, 16 KB of SRAM, and four CAN channels. According to the NXP LPC2194 datasheet, its 128-bit memory interface and accelerator architecture support efficient 32-bit execution at the maximum clock rate. The device is packaged in a 64-LQFP measuring 10 x 10 mm and is intended for embedded control and communication-intensive industrial systems.
What are the key specifications of LPC2194HBD64?
The LPC2194HBD64 combines a 60 MHz ARM7TDMI-S core, 256 KB of embedded flash, 16 KB of SRAM, a 10-bit ADC, four CAN channels, and 46 programmable I/O pins in a 64-LQFP package. According to the NXP product page and LPC2194 datasheet, a 128-bit memory interface and accelerator architecture enable high-speed 32-bit operation. The device also supports real-time emulation, embedded trace, boundary scan, and CAN operation at up to 1 Mbit/s per bus.
How much flash and SRAM does LPC2194HBD64 have?
The LPC2194HBD64 has 256 KB of embedded high-speed flash and 16 KB of on-chip SRAM. The NXP manufacturer page identifies the flash as ISP/IAP programmable, allowing firmware to be programmed or updated through the device's supported programming paths. The same manufacturer documentation describes a 128-bit-wide memory interface and accelerator architecture that help the ARM7TDMI-S CPU execute 32-bit code efficiently at up to 60 MHz.
How many CAN channels does LPC2194HBD64 have?
The LPC2194HBD64 provides four CAN channels, making it suitable for gateways and equipment that bridges multiple CAN networks. The LPC2194 datasheet excerpt states support for data rates up to 1 Mbit/s on each bus, compatibility with CAN specification 2.0B and ISO 11898-1, and acceptance filtering for 11-bit and 29-bit identifiers. This allows selected standard identifiers to be handled with FullCAN-style automatic reception.
Where can I download the LPC2194HBD64 datasheet PDF?
The official LPC2194HBD64 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC2194.pdf. The document describes the ARM7TDMI-S CPU, memory organization, flash and SRAM, CAN peripherals, ADC, electrical characteristics, package information, and pin connections. Use the manufacturer pin-description table when assigning PCB signals because alternate peripheral functions and legacy power pins must be connected exactly as specified.
Where can I find the LPC2194HBD64 pinout?
The LPC2194HBD64 pinout is documented in the official NXP LPC2194 datasheet, beginning with the LQFP64 pin-description and connection tables. The device has 64 pins in a 10 x 10 mm gull-wing package, with pin 1 identified by the package marking convention. Assign every power, ground, reset, clock, and multiplexed peripheral signal from that table rather than inferring connections from a functionally similar microcontroller.
Where can I buy LPC2194HBD64 online?
Use the Request a Quote form on this XAIPART product page to request LPC2194HBD64 availability, order quantity, and current lead time. The exact target is the base LPC2194HBD64 designation; suffix codes can identify different speed, temperature, or packaging configurations and should not be substituted without checking the NXP ordering information. Current sourcing details should be confirmed through the quote process before committing a production bill of materials.
What is the price of LPC2194HBD64?
Use the Request a Quote form on this page for the current LPC2194HBD64 unit price and volume pricing. Legacy ARM7 microcontroller pricing can vary materially with quantity, condition, date code, and exact suffix configuration. Confirm that the quotation identifies the base LPC2194HBD64 and the required 64-LQFP package rather than LPC2194HBD64/01, LPC2194HBD64-S, or another member of the LPC2194 family.
Is LPC2194HBD64 in stock and what is its lead time?
The current LPC2194HBD64 stock position and lead time should be requested through the Request a Quote form on this page. Because the LPC2194 is a legacy ARM7 family, long-term supply can depend on remaining factory inventory, exact suffix code, and replenishment status. Provide the required delivery schedule and annual usage when requesting the quotation so the response reflects the appropriate supply channel and production plan.
What can replace LPC2194HBD64?
The closest documented same-package candidates are LPC2194HBD64/01 and LPC2194HBD64-S, but a replacement must be checked for clock-speed, temperature, qualification, and ordering-code differences. NXP community guidance indicates that the LPC2194 is not recommended for new designs, yet no verified cross-brand pin-to-pin replacement was identified for the exact LPC2194HBD64 footprint and peripheral arrangement. A redesign to a current MCU family should be treated as a board-level migration, not a drop-in substitution.
Is LPC2194HBD64 the same as LPC2194HBD64/01?
No, LPC2194HBD64 and LPC2194HBD64/01 should be treated as distinct orderable configurations until the NXP ordering information confirms otherwise. The distributor listing identifies LPC2194HBD64/01 as a 60 MHz, 256 KB-flash, 16 KB-SRAM ARM7 MCU in the same 64-LQFP family, but suffix codes may change operating temperature, qualification, or production conditions. Verify the complete ordering code before using it as a production substitute.
Can LPC2194HBD64-S replace LPC2194HBD64?
LPC2194HBD64-S may serve as a candidate for LPC2194HBD64 because both belong to the same NXP LPC2194 family and use the 64-LQFP form factor, but equivalence is not established solely by the package. The NXP datasheet ordering information must confirm matching flash, SRAM, CPU speed, temperature grade, qualification status, and pin configuration. Treat the part as a drop-in candidate only after those requirements are matched and the assembly process is reviewed.
When should I choose LPC2194HBD64 over a current ARM Cortex-M MCU?
Choose LPC2194HBD64 when maintaining an existing ARM7TDMI-S design requires the established LPC2194 architecture, four CAN channels, 256 KB flash, and 16 KB SRAM. For a new design, prefer a current Cortex-M MCU when its peripherals, memory, tools, and availability better match the product roadmap because migration may require firmware, pin muxing, startup-code, and PCB changes. The NXP community identifies LPC2194 as not recommended for new designs.
Is LPC2194HBD64 suitable for CAN gateway applications?
Yes, the LPC2194HBD64 is well suited to CAN gateway and industrial networking designs because it combines four CAN channels with a 60 MHz ARM7TDMI-S core and 256 KB of flash. The manufacturer documentation identifies CAN 2.0B and ISO 11898-1 compatibility, operation up to 1 Mbit/s per bus, and acceptance filtering for both standard and extended identifiers. External transceivers, proper termination, and reference clock design remain necessary.
What tools and debug support are available for LPC2194HBD64?
The LPC2194HBD64 supports real-time emulation and embedded trace through its ARM7TDMI-S debug architecture. The manufacturer documentation also identifies boundary-scan capability, while the Keil datasheet material indicates support for established ARM7 development workflows. Toolchain selection should account for the legacy ARM7 target and the device's 60 MHz operating mode. Preserve the specified JTAG or trace connections in the PCB layout to maintain diagnostic access.

נתוני עזר הנדסיים עבור LPC2194HBD64 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose LPC2194HBD64 when sustaining a design that specifically depends on the LPC2194's ARM7TDMI-S core, 256 KB flash, 16 KB SRAM, four CAN channels, 10-bit ADC, and 64-LQFP footprint. LPC2194HBD64/01, LPC2194HBD64-S, or LPC2194HBD64/01,15 are appropriate candidates when the NXP ordering table confirms matching speed, temperature, qualification, and lifecycle requirements. No verified cross-brand pin-to-pin substitute was found for the exact footprint and peripheral arrangement, so similarly featured ARM7 or CAN controllers should be treated as redesign options. For a new product, a current Cortex-M MCU generally offers better long-term software tooling and supply prospects, but migration requires firmware, startup-code, peripheral, and usually PCB changes.

השוואה עם חלופות

פרמטר מוצר זה LPC2194HBD64/01 LPC2194HBD64-S LPC2194HBD64/01,15
Package 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm) 64-LQFP (10x10 mm)
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
CPU Core ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S ARM7TDMI-S
Maximum CPU Frequency 60 MHz 60 MHz 60 MHz 60 MHz
Flash Memory 256 KB 256 KB 256 KB 256 KB
SRAM 16 KB 16 KB 16 KB 16 KB
ADC Resolution 10 bit 10 bit 10 bit 10 bit
CAN Channels 4 channels 4 channels 4 channels 4 channels
Programmable I/O 46 pins 46 pins 46 pins 46 pins
Maximum CAN Data Rate 1 Mbit/s per bus 1 Mbit/s per bus 1 Mbit/s per bus 1 Mbit/s per bus
Ordering Qualification Base LPC2194HBD64 designation Suffixed ordering configuration Suffixed ordering configuration Suffixed ordering configuration

מבדילים עיקריים

  • Four integrated CAN channels (לעומתLPC2194HBD64/01)
  • Established ARM7 memory and acceleration architecture (לעומתLPC2194HBD64-S)
  • Broad peripheral integration in a compact package (לעומתLPC2194HBD64/01,15)

הערות תכנון

Assign the board from the official NXP LPC2194 pin-description table rather than from a generic ARM7 controller footprint. The LPC2194HBD64 uses a 64-LQFP package with alternate peripheral functions, dedicated analog inputs, clock signals, reset functions, and power pins. Keep the package orientation consistent with pin 1, provide the required decoupling directly at the supply pins, and route the 10-bit ADC inputs away from switching nodes and high-current return paths to preserve signal integrity.

Follow the manufacturer clock and reset layout recommendations because timing margins can be affected by clock routing, return current, and nearby noise sources. The device supports real-time emulation and embedded trace, so preserve access to the debug interface for production diagnosis. For CAN-connected boards, use short, continuous return paths beneath transceiver signals and isolate high-current switching loops from the MCU and analog sections. Validate bus timing with the intended transceiver, cable, termination, and maximum node count rather than relying only on nominal controller timing.

Do not assume that every LPC2194 orderable suffix is production-equivalent merely because the package and headline memory values match. Before substituting LPC2194HBD64/01, LPC2194HBD64-S, or LPC2194HBD64/01,15, check the complete NXP ordering information for temperature grade, clock limit, qualification, and lifecycle conditions. This is especially important for automotive or industrial deployments because a package-compatible ordering code can still impose different environmental or production requirements.

Design the supply network and decoupling around the manufacturer's LPC2194 electrical limits rather than generic assumptions. The ADC reference and analog supply requirements may differ from the digital core supply, and their connections must follow the datasheet's recommended network. Use local bulk and high-frequency decoupling where directed, maintain a low-impedance return path, and verify startup and power-supply sequencing against the selected reset method. If the device replaces another MCU, check rail ramp rates and brownout behavior rather than preserving the original board without review.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The exact LPC2194HBD64 compliance declarations could not be established from the manufacturer product-page and datasheet excerpts. Qualification status must be checked for the selected ordering suffix before use in automotive or other regulated environments.

חיפושים קשורים

LPC2194HBD64 datasheet LPC2194HBD64 specifications LPC2194HBD64 pinout LPC2194HBD64 datasheet pdf NXP LPC2194HBD64 LPC2194HBD64 LQFP64 LPC2194HBD64 replacement LPC2194HBD64 equivalent LPC2194HBD64 cross reference LPC2194HBD64 vs LPC2194HBD64-S LPC2194HBD64 CAN controller LPC2194HBD64 price LPC2194HBD64 stock LPC2194HBD64 schematic

רכיבים ומונחים קשורים

NXP Semiconductors LPC2194HBD64 LPC2194HBD64/01 LPC2194HBD64-S LPC2194HBD64/01,15 ARM7TDMI-S microcontroller embedded microcontroller RISC semiconductor ISP IAP CAN CAN 2.0B ISO 11898-1 10-bit ADC PWM real-time emulation embedded trace boundary scan LQFP64 64-LQFP gull-wing package industrial automation CAN gateway
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר